July 2021 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Thu Jul 1 00:39:54 PDT 2021
Ending: Fri Jul 30 03:46:02 PDT 2021
Messages: 322

• [RFC PATCH 0/4] add sifive reset device   Green Wan
  • [RFC PATCH 1/4] lib: utils: reset: unify naming of 'sifive_test' device   Green Wan
    • [RFC PATCH 1/4] lib: utils: reset: unify naming of 'sifive_test' device   Bin Meng
      • [RFC PATCH 1/4] lib: utils: reset: unify naming of 'sifive_test' device   Anup Patel
  • [RFC PATCH 2/4] lib: utils: add GPIO and poweroff parsing   Green Wan
    • [RFC PATCH 2/4] lib: utils: add GPIO and poweroff parsing   Bin Meng
  • [RFC PATCH 3/4] lib: utils: add gpio generic interface   Green Wan
    • [RFC PATCH 3/4] lib: utils: add gpio generic interface   Bin Meng
    • [RFC PATCH 3/4] lib: utils: add gpio generic interface   Jessica Clarke
  • [RFC PATCH 4/4] lib: utils: add sifive reset device   Green Wan
    • [RFC PATCH 4/4] lib: utils: add sifive reset device   Bin Meng
  • [RFC PATCH 0/4] add sifive reset device   Anup Patel
• [PATCH v3 10/15] lib: sbi: Add PMU support   Anup Patel
• [PATCH v4 00/15] SBI PMU extension support   Atish Patra
  • [PATCH v4 02/15] lib: sbi: Detect mcountinihibit support at runtime   Atish Patra
  • [PATCH v4 03/15] lib: sbi: Remove stray '\' character   Atish Patra
  • [PATCH v4 04/15] lib: sbi: Detect number of bits implemented in mhpmcounter   Atish Patra
  • [PATCH v4 05/15] lib: sbi: Disable m/scounteren & enable mcountinhibit   Atish Patra
  • [PATCH v4 06/15] include: Add a list empty check function   Atish Patra
  • [PATCH v4 07/15] lib: sbi: Remove redundant boot time print statement   Atish Patra
  • [PATCH v4 08/15] lib: sbi: Use csr_read/write_num to read/update PMU counters   Atish Patra
  • [PATCH v4 09/15] lib: sbi: Add PMU specific platform hooks   Atish Patra
  • [PATCH v4 10/15] lib: sbi: Add PMU support   Atish Patra
    • [PATCH v4 10/15] lib: sbi: Add PMU support   Anup Patel
  • [PATCH v4 11/15] utils: fdt: Add fdt helper functions to parse PMU DT nodes   Atish Patra
  • [PATCH v4 12/15] lib: sbi: Implement SBI PMU extension   Atish Patra
  • [PATCH v4 13/15] lib: sbi: Implement firmware counters   Atish Patra
  • [PATCH v4 14/15] lib:sbi:tlb: Improve function naming   Atish Patra
  • [PATCH v4 15/15] platform: generic: Add PMU support   Atish Patra
• [PATCH v4 01/15] docs: Add device tree bindings for SBI PMU extension   Atish Patra
• undefined reference to `__dyn_sym_start' since commit bf3ef53bb7f5 ("firmware: Enable FW_PIC by default")   Heinrich Schuchardt
  • undefined reference to `__dyn_sym_start' since commit bf3ef53bb7f5 ("firmware: Enable FW_PIC by default")   Bin Meng
    • undefined reference to `__dyn_sym_start' since commit bf3ef53bb7f5 ("firmware: Enable FW_PIC by default")   Heinrich Schuchardt
      • undefined reference to `__dyn_sym_start' since commit bf3ef53bb7f5 ("firmware: Enable FW_PIC by default")   Bin Meng
  • undefined reference to `__dyn_sym_start' since commit bf3ef53bb7f5 ("firmware: Enable FW_PIC by default")   Xiang W
• [PATCH] docs/platform: thead-c9xx: Remove FW_PIC=y   Bin Meng
  • [PATCH] docs/platform: thead-c9xx: Remove FW_PIC=y   Anup Patel
• [PATCH 0/2] Fully support standalone Clang/LLVM toolchains   Jessica Clarke
  • [PATCH 1/2] Makefile: Support building with Clang and LLVM binutils   Jessica Clarke
    • [PATCH 1/2] Makefile: Support building with Clang and LLVM binutils   Bin Meng
      • [PATCH 1/2] Makefile: Support building with Clang and LLVM binutils   Jessica Clarke
      • [PATCH 1/2] Makefile: Support building with Clang and LLVM binutils   Bin Meng
      • [PATCH 1/2] Makefile: Support building with Clang and LLVM binutils   Jessica Clarke
      • [PATCH 1/2] Makefile: Support building with Clang and LLVM binutils   Bin Meng
      • [PATCH 1/2] Makefile: Support building with Clang and LLVM binutils   Anup Patel
      • [PATCH 1/2] Makefile: Support building with Clang and LLVM binutils   Jessica Clarke
    • [PATCH 1/2] Makefile: Support building with Clang and LLVM binutils   Xiang W
      • [PATCH 1/2] Makefile: Support building with Clang and LLVM binutils   Jessica Clarke
  • [PATCH 2/2] Drop dependency on libgcc by importing part of FreeBSD's libquad   Jessica Clarke
    • [PATCH 2/2] Drop dependency on libgcc by importing part of FreeBSD's libquad   Anup Patel
      • [PATCH 2/2] Drop dependency on libgcc by importing part of FreeBSD's libquad   Jessica Clarke
    • [PATCH 2/2] Drop dependency on libgcc by importing part of FreeBSD's libquad   Xiang W
      • [PATCH 2/2] Drop dependency on libgcc by importing part of FreeBSD's libquad   Jessica Clarke
    • [PATCH 2/2] Drop dependency on libgcc by importing part of FreeBSD's libquad   Xiang W
      • [PATCH 2/2] Drop dependency on libgcc by importing part of FreeBSD's libquad   Jessica Clarke
  • [PATCH 0/2] Fully support standalone Clang/LLVM toolchains   Bin Meng
    • [PATCH 0/2] Fully support standalone Clang/LLVM toolchains   Jessica Clarke
      • [PATCH 0/2] Fully support standalone Clang/LLVM toolchains   Bin Meng
    • [PATCH 0/2] Fully support standalone Clang/LLVM toolchains   Anup Patel
      • [PATCH 0/2] Fully support standalone Clang/LLVM toolchains   Bin Meng
      • [PATCH 0/2] Fully support standalone Clang/LLVM toolchains   Anup Patel
• [PATCH] platform: generic: Terminate platform.name with null   Bin Meng
  • [PATCH] platform: generic: Terminate platform.name with null   Anup Patel
• [PATCH] include: simplify the definition of s64/u64/int64/uint64   Xiang W
  • [PATCH] include: simplify the definition of s64/u64/int64/uint64   Anup Patel
    • [PATCH] include: simplify the definition of s64/u64/int64/uint64   Xiang W
  • [PATCH] include: simplify the definition of s64/u64/int64/uint64   Xiang W
• [PATCH] firmware: Define a macro for version of struct fw_dynamic_info   Bin Meng
  • [PATCH] firmware: Define a macro for version of struct fw_dynamic_info   Xiang W
    • [PATCH] firmware: Define a macro for version of struct fw_dynamic_info   Anup Patel
• [PATCH] firmware: Remove the sanity checks in fw_save_info()   Bin Meng
  • [PATCH] firmware: Remove the sanity checks in fw_save_info()   Xiang W
    • [PATCH] firmware: Remove the sanity checks in fw_save_info()   Anup Patel
• [PATCH 1/2] docs: Correct a typo in platform_guide.md   Bin Meng
  • [PATCH 2/2] docs: Make <xyz> visible in the rendered platform guide   Bin Meng
    • [PATCH 2/2] docs: Make <xyz> visible in the rendered platform guide   Xiang W
      • [PATCH 2/2] docs: Make <xyz> visible in the rendered platform guide   Anup Patel
  • [PATCH 1/2] docs: Correct a typo in platform_guide.md   Xiang W
    • [PATCH 1/2] docs: Correct a typo in platform_guide.md   Anup Patel
• [PATCH] firmware: Minor optimization in _scratch_init()   Bin Meng
  • [PATCH] firmware: Minor optimization in _scratch_init()   Xiang W
  • [PATCH] firmware: Minor optimization in _scratch_init()   Atish Patra
    • [PATCH] firmware: Minor optimization in _scratch_init()   Bin Meng
• [PATCH v2 0/2] Fully support standalone Clang/LLVM toolchains   Jessica Clarke
  • [PATCH v2 2/2] Drop dependency on libgcc by importing part of FreeBSD's libquad   Jessica Clarke
• [PATCH v2 1/2] Makefile: Support building with Clang and LLVM binutils   Jessica Clarke
  • [PATCH v2 1/2] Makefile: Support building with Clang and LLVM binutils   Bin Meng
    • [PATCH v2 1/2] Makefile: Support building with Clang and LLVM binutils   Jessica Clarke
      • [PATCH v2 1/2] Makefile: Support building with Clang and LLVM binutils   Bin Meng
      • [PATCH v2 1/2] Makefile: Support building with Clang and LLVM binutils   Jessica Clarke
      • [PATCH v2 1/2] Makefile: Support building with Clang and LLVM binutils   Jessica Clarke
      • [PATCH v2 1/2] Makefile: Support building with Clang and LLVM binutils   Bin Meng
      • [PATCH v2 1/2] Makefile: Support building with Clang and LLVM binutils   Bin Meng
      • [PATCH v2 1/2] Makefile: Support building with Clang and LLVM binutils   Bin Meng
      • [PATCH v2 1/2] Makefile: Support building with Clang and LLVM binutils   Jessica Clarke
      • [PATCH v2 1/2] Makefile: Support building with Clang and LLVM binutils   Bin Meng
      • [PATCH v2 1/2] Makefile: Support building with Clang and LLVM binutils   Jessica Clarke
      • [PATCH v2 1/2] Makefile: Support building with Clang and LLVM binutils   Anup Patel
      • [PATCH v2 1/2] Makefile: Support building with Clang and LLVM binutils   Jessica Clarke
      • [PATCH v2 1/2] Makefile: Support building with Clang and LLVM binutils   Jessica Clarke
      • [PATCH v2 1/2] Makefile: Support building with Clang and LLVM binutils   Anup Patel
      • [PATCH v2 1/2] Makefile: Support building with Clang and LLVM binutils   Bin Meng
• [PATCH v3 0/3] Fully support standalone Clang/LLVM toolchains   Jessica Clarke
  • [PATCH v3 0/3] Fully support standalone Clang/LLVM toolchains   Xiang W
    • [PATCH v3 0/3] Fully support standalone Clang/LLVM toolchains   Jessica Clarke
      • [PATCH v3 0/3] Fully support standalone Clang/LLVM toolchains   Xiang W
      • [PATCH v3 0/3] Fully support standalone Clang/LLVM toolchains   Jessica Clarke
      • [PATCH v3 0/3] Fully support standalone Clang/LLVM toolchains   Xiang W
• [PATCH v3 1/3] fw_base: Don't mark fw_platform_init as both global and weak   Jessica Clarke
  • [PATCH v3 1/3] fw_base: Don't mark fw_platform_init as both global and weak   Jessica Clarke
    • [PATCH v3 1/3] fw_base: Don't mark fw_platform_init as both global and weak   Bin Meng
• [PATCH v3 2/3] Makefile: Support building with Clang and LLVM binutils   Jessica Clarke
  • [PATCH v3 2/3] Makefile: Support building with Clang and LLVM binutils   Bin Meng
• [PATCH v3 3/3] Drop dependency on libgcc by importing part of FreeBSD's libquad   Jessica Clarke
• [PATCH v2 0/6] GPIO reset support   Anup Patel
  • [PATCH v2 1/6] lib: utils/fdt: Add fdt_parse_phandle_with_args() API   Anup Patel
    • [PATCH v2 1/6] lib: utils/fdt: Add fdt_parse_phandle_with_args() API   Atish Patra
  • [PATCH v2 2/6] lib: utils/gpio: Add generic GPIO configuration library   Anup Patel
    • [PATCH v2 2/6] lib: utils/gpio: Add generic GPIO configuration library   Atish Patra
      • [PATCH v2 2/6] lib: utils/gpio: Add generic GPIO configuration library   Anup Patel
  • [PATCH v2 3/6] lib: utils/gpio: Add simple FDT based GPIO framework   Anup Patel
    • [PATCH v2 3/6] lib: utils/gpio: Add simple FDT based GPIO framework   Atish Patra
  • [PATCH v2 4/6] lib: utils/gpio: Add minimal SiFive GPIO driver   Anup Patel
  • [PATCH v2 5/6] lib: utils/reset: Add generic GPIO reset driver   Anup Patel
    • [PATCH v2 5/6] lib: utils/reset: Add generic GPIO reset driver   Atish Patra
      • [PATCH v2 5/6] lib: utils/reset: Add generic GPIO reset driver   Anup Patel
  • [PATCH v2 6/6] lib: utils/fdt: Disable GPIO restart and poweroff nodes in fdt_fixups()   Anup Patel
    • [PATCH v2 6/6] lib: utils/fdt: Disable GPIO restart and poweroff nodes in fdt_fixups()   Bin Meng
      • [PATCH v2 6/6] lib: utils/fdt: Disable GPIO restart and poweroff nodes in fdt_fixups()   Atish Patra
      • [PATCH v2 6/6] lib: utils/fdt: Disable GPIO restart and poweroff nodes in fdt_fixups()   Anup Patel
• [PATCH v4 0/5] Fully support standalone Clang/LLVM toolchains   Jessica Clarke
  • [PATCH v4 4/5] Makefile: Support building with Clang and LLVM binutils   Jessica Clarke
    • [PATCH v4 4/5] Makefile: Support building with Clang and LLVM binutils   Bin Meng
      • [PATCH v4 4/5] Makefile: Support building with Clang and LLVM binutils   Bin Meng
      • [PATCH v4 4/5] Makefile: Support building with Clang and LLVM binutils   Jessica Clarke
      • [PATCH v4 4/5] Makefile: Support building with Clang and LLVM binutils   Bin Meng
  • [PATCH v4 5/5] Drop dependency on libgcc by importing part of FreeBSD's libquad   Jessica Clarke
  • [PATCH v4 0/5] Fully support standalone Clang/LLVM toolchains   Jessica Clarke
• [PATCH v4 1/5] fw_base: Don't mark fw_platform_init as both global and weak   Jessica Clarke
  • [PATCH v4 1/5] fw_base: Don't mark fw_platform_init as both global and weak   Bin Meng
• [PATCH v4 2/5] fw_base: Put data in .data rather than .text   Jessica Clarke
  • [PATCH v4 2/5] fw_base: Put data in .data rather than .text   Bin Meng
• [PATCH v4 3/5] firmware: Explicitly pass -pie to the linker, not just the driver   Jessica Clarke
  • [PATCH v4 3/5] firmware: Explicitly pass -pie to the linker, not just the driver   Bin Meng
    • [PATCH v4 3/5] firmware: Explicitly pass -pie to the linker, not just the driver   Bin Meng
      • [PATCH v4 3/5] firmware: Explicitly pass -pie to the linker, not just the driver   Anup Patel
      • [PATCH v4 3/5] firmware: Explicitly pass -pie to the linker, not just the driver   Bin Meng
      • [PATCH v4 3/5] firmware: Explicitly pass -pie to the linker, not just the driver   Anup Patel
      • [PATCH v4 3/5] firmware: Explicitly pass -pie to the linker, not just the driver   Bin Meng
      • [PATCH v4 3/5] firmware: Explicitly pass -pie to the linker, not just the driver   Anup Patel
      • [PATCH v4 3/5] firmware: Explicitly pass -pie to the linker, not just the driver   Xiang W
      • [PATCH v4 3/5] firmware: Explicitly pass -pie to the linker, not just the driver   Jessica Clarke
      • [PATCH v4 3/5] firmware: Explicitly pass -pie to the linker, not just the driver   Xiang W
      • [PATCH v4 3/5] firmware: Explicitly pass -pie to the linker, not just the driver   Jessica Clarke
• [PATCH v3 0/5] GPIO reset support   Anup Patel
  • [PATCH v3 1/5] lib: utils/fdt: Add fdt_parse_phandle_with_args() API   Anup Patel
  • [PATCH v3 2/5] lib: utils/gpio: Add generic GPIO configuration library   Anup Patel
    • [PATCH v3 2/5] lib: utils/gpio: Add generic GPIO configuration library   Atish Patra
  • [PATCH v3 3/5] lib: utils/gpio: Add simple FDT based GPIO framework   Anup Patel
  • [PATCH v3 4/5] lib: utils/gpio: Add minimal SiFive GPIO driver   Anup Patel
    • [PATCH v3 4/5] lib: utils/gpio: Add minimal SiFive GPIO driver   Atish Patra
  • [PATCH v3 5/5] lib: utils/reset: Add generic GPIO reset driver   Anup Patel
    • [PATCH v3 5/5] lib: utils/reset: Add generic GPIO reset driver   Atish Patra
    • [PATCH v3 5/5] lib: utils/reset: Add generic GPIO reset driver   Anup Patel
      • [PATCH v3 5/5] lib: utils/reset: Add generic GPIO reset driver   Anup Patel
      • [PATCH v3 5/5] lib: utils/reset: Add generic GPIO reset driver   Anup Patel
  • [PATCH v3 0/5] GPIO reset support   Anup Patel
• [PATCH v2] firmware: Minor optimization in _scratch_init()   Bin Meng
  • [PATCH v2] firmware: Minor optimization in _scratch_init()   Anup Patel
• [PATCH 1/2] firmware: Remove the unhelpful alignment codes before fdt relocation   Bin Meng
  • [PATCH 2/2] docs: firmware: Document parameters passed to firmware and alignment requirement   Bin Meng
    • [PATCH 2/2] docs: firmware: Document parameters passed to firmware and alignment requirement   Anup Patel
  • [PATCH 1/2] firmware: Remove the unhelpful alignment codes before fdt relocation   Anup Patel
• [PATCH v5 00/15] SBI PMU extension support   Atish Patra
  • [PATCH v5 01/15] docs: Add device tree bindings for SBI PMU extension   Atish Patra
    • [PATCH v5 01/15] docs: Add device tree bindings for SBI PMU extension   Anup Patel
  • [PATCH v5 02/15] lib: sbi: Detect mcountinihibit support at runtime   Atish Patra
    • [PATCH v5 02/15] lib: sbi: Detect mcountinihibit support at runtime   Anup Patel
  • [PATCH v5 03/15] lib: sbi: Remove stray '\' character   Atish Patra
    • [PATCH v5 03/15] lib: sbi: Remove stray '\' character   Anup Patel
  • [PATCH v5 04/15] lib: sbi: Detect number of bits implemented in mhpmcounter   Atish Patra
    • [PATCH v5 04/15] lib: sbi: Detect number of bits implemented in mhpmcounter   Anup Patel
  • [PATCH v5 05/15] lib: sbi: Disable m/scounteren & enable mcountinhibit   Atish Patra
    • [PATCH v5 05/15] lib: sbi: Disable m/scounteren & enable mcountinhibit   Anup Patel
  • [PATCH v5 06/15] include: Add a list empty check function   Atish Patra
    • [PATCH v5 06/15] include: Add a list empty check function   Anup Patel
  • [PATCH v5 07/15] lib: sbi: Remove redundant boot time print statement   Atish Patra
    • [PATCH v5 07/15] lib: sbi: Remove redundant boot time print statement   Anup Patel
  • [PATCH v5 08/15] lib: sbi: Use csr_read/write_num to read/update PMU counters   Atish Patra
    • [PATCH v5 08/15] lib: sbi: Use csr_read/write_num to read/update PMU counters   Anup Patel
  • [PATCH v5 09/15] lib: sbi: Add PMU specific platform hooks   Atish Patra
    • [PATCH v5 09/15] lib: sbi: Add PMU specific platform hooks   Anup Patel
  • [PATCH v5 10/15] lib: sbi: Add PMU support   Atish Patra
    • [PATCH v5 10/15] lib: sbi: Add PMU support   Anup Patel
  • [PATCH v5 11/15] utils: fdt: Add fdt helper functions to parse PMU DT nodes   Atish Patra
    • [PATCH v5 11/15] utils: fdt: Add fdt helper functions to parse PMU DT nodes   Anup Patel
  • [PATCH v5 12/15] lib: sbi: Implement SBI PMU extension   Atish Patra
    • [PATCH v5 12/15] lib: sbi: Implement SBI PMU extension   Anup Patel
  • [PATCH v5 13/15] lib: sbi: Implement firmware counters   Atish Patra
    • [PATCH v5 13/15] lib: sbi: Implement firmware counters   Anup Patel
  • [PATCH v5 14/15] lib:sbi:tlb: Improve function naming   Atish Patra
    • [PATCH v5 14/15] lib:sbi:tlb: Improve function naming   Anup Patel
  • [PATCH v5 15/15] platform: generic: Add PMU support   Atish Patra
    • [PATCH v5 15/15] platform: generic: Add PMU support   Anup Patel
• [PATCH] firmware: Detect whether the toolchain supports pie and automatically disable the FW_PIC option   Xiang W
  • [PATCH] firmware: Detect whether the toolchain supports pie and automatically disable the FW_PIC option   Jessica Clarke
    • [PATCH] firmware: Detect whether the toolchain supports pie and automatically disable the FW_PIC option   Xiang W
    • [PATCH] firmware: Detect whether the toolchain supports pie and automatically disable the FW_PIC option   Xiang W
  • [PATCH] firmware: Detect whether the toolchain supports pie and automatically disable the FW_PIC option   Xiang W
    • [PATCH] firmware: Detect whether the toolchain supports pie and automatically disable the FW_PIC option   Jessica Clarke
  • [PATCH] firmware: Detect whether the toolchain supports pie and automatically disable the FW_PIC option   Xiang W
  • [PATCH] firmware: Detect whether the toolchain supports pie and automatically disable the FW_PIC option   Xiang W
    • [PATCH] firmware: Detect whether the toolchain supports pie and automatically disable the FW_PIC option   Bin Meng
• [PATCH v5 0/6] Fully support standalone Clang/LLVM toolchains   Jessica Clarke
  • [PATCH v5 5/6] Makefile: Support building with Clang and LLVM binutils   Jessica Clarke
    • [PATCH v5 5/6] Makefile: Support building with Clang and LLVM binutils   Bin Meng
      • [PATCH v5 5/6] Makefile: Support building with Clang and LLVM binutils   Jessica Clarke
      • [PATCH v5 5/6] Makefile: Support building with Clang and LLVM binutils   Bin Meng
      • [PATCH v5 5/6] Makefile: Support building with Clang and LLVM binutils   Jessica Clarke
    • [PATCH v5 5/6] Makefile: Support building with Clang and LLVM binutils   Anup Patel
      • [PATCH v5 5/6] Makefile: Support building with Clang and LLVM binutils   Bin Meng
  • [PATCH v5 6/6] Drop dependency on libgcc by importing part of FreeBSD's libquad   Jessica Clarke
    • [PATCH v5 6/6] Drop dependency on libgcc by importing part of FreeBSD's libquad   Anup Patel
      • [PATCH v5 6/6] Drop dependency on libgcc by importing part of FreeBSD's libquad   Bin Meng
      • [PATCH v5 6/6] Drop dependency on libgcc by importing part of FreeBSD's libquad   Anup Patel
      • [PATCH v5 6/6] Drop dependency on libgcc by importing part of FreeBSD's libquad   Bin Meng
      • [PATCH v5 6/6] Drop dependency on libgcc by importing part of FreeBSD's libquad   Anup Patel
      • [PATCH v5 6/6] Drop dependency on libgcc by importing part of FreeBSD's libquad   Bin Meng
  • [PATCH v5 0/6] Fully support standalone Clang/LLVM toolchains   Bin Meng
    • [PATCH v5 0/6] Fully support standalone Clang/LLVM toolchains   Jessica Clarke
      • [PATCH v5 0/6] Fully support standalone Clang/LLVM toolchains   Bin Meng
      • [PATCH v5 0/6] Fully support standalone Clang/LLVM toolchains   Jessica Clarke
• [PATCH v5 1/6] fw_base: Don't mark fw_platform_init as both global and weak   Jessica Clarke
  • [PATCH v5 1/6] fw_base: Don't mark fw_platform_init as both global and weak   Anup Patel
• [PATCH v5 2/6] fw_base: Put data in .data rather than .text   Jessica Clarke
  • [PATCH v5 2/6] fw_base: Put data in .data rather than .text   Anup Patel
• [PATCH v5 3/6] firmware: Explicitly pass -pie to the linker, not just the driver   Jessica Clarke
  • [PATCH v5 3/6] firmware: Explicitly pass -pie to the linker, not just the driver   Bin Meng
    • [PATCH v5 3/6] firmware: Explicitly pass -pie to the linker, not just the driver   Anup Patel
  • [PATCH v5 3/6] firmware: Explicitly pass -pie to the linker, not just the driver   Bin Meng
    • [PATCH v5 3/6] firmware: Explicitly pass -pie to the linker, not just the driver   Jessica Clarke
      • [PATCH v5 3/6] firmware: Explicitly pass -pie to the linker, not just the driver   Bin Meng
• [PATCH v5 4/6] firmware: Only default FW_PIC to y if supported   Jessica Clarke
  • [PATCH v5 4/6] firmware: Only default FW_PIC to y if supported   Xiang W
    • [PATCH v5 4/6] firmware: Only default FW_PIC to y if supported   James Clarke
  • [PATCH v5 4/6] firmware: Only default FW_PIC to y if supported   Bin Meng
    • [PATCH v5 4/6] firmware: Only default FW_PIC to y if supported   Anup Patel
• [PATCH v4] firmware: Detect whether the toolchain supports pie and automatically disable the FW_PIC option   Xiang W
• [PATCH v5] firmware: Detect whether the toolchain supports pie and automatically disable the FW_PIC option   Xiang W
  • [PATCH v5] firmware: Detect whether the toolchain supports pie and automatically disable the FW_PIC option   Xiang W
• [PATCH] lib: sbi: Fix sbi_pmu_exit() for systems not having MCOUNTINHIBIT csr   Anup Patel
  • [PATCH] lib: sbi: Fix sbi_pmu_exit() for systems not having MCOUNTINHIBIT csr   Anup Patel
  • [PATCH] lib: sbi: Fix sbi_pmu_exit() for systems not having MCOUNTINHIBIT csr   Atish Patra
• [PATCH] README: Update toolchain information   Bin Meng
  • [PATCH] README: Update toolchain information   Jessica Clarke
• [PATCH v2] README: Update toolchain information   Bin Meng
  • [PATCH v2] README: Update toolchain information   Jessica Clarke
    • [PATCH v2] README: Update toolchain information   Bin Meng
      • [PATCH v2] README: Update toolchain information   Jessica Clarke
• [PATCH] docs: firmware: Document FW_PIC compile time option   Bin Meng
  • [PATCH] docs: firmware: Document FW_PIC compile time option   Anup Patel
• [PATCH v3] README: Update toolchain information   Bin Meng
  • [PATCH v3] README: Update toolchain information   Anup Patel
• [PATCH] Makefile: Pass "-Wa, -mno-relax" to manually forward it to the GNU assembler when linking with LLD   Bin Meng
  • [PATCH] Makefile: Pass "-Wa, -mno-relax" to manually forward it to the GNU assembler when linking with LLD   Jessica Clarke
• [PATCH v2] Makefile: Manually forward RELAX_FLAG to the GNU assembler when linking with LLD   Bin Meng
  • [PATCH v2] Makefile: Manually forward RELAX_FLAG to the GNU assembler when linking with LLD   Anup Patel
• [PATCH 1/1] firware: use __SIZEOF_LONG__ for field offsets in fw_dynamic.h   Alex Richardson
  • [PATCH 1/1] firware: use __SIZEOF_LONG__ for field offsets in fw_dynamic.h   Bin Meng
    • [PATCH 1/1] firware: use __SIZEOF_LONG__ for field offsets in fw_dynamic.h   Anup Patel
• [PATCH 1/1] include: types: Use __builtin_offsetof when supported   Alex Richardson
  • [PATCH 1/1] include: types: Use __builtin_offsetof when supported   Jessica Clarke
    • [PATCH 1/1] include: types: Use __builtin_offsetof when supported   Andreas Schwab
      • [PATCH 1/1] include: types: Use __builtin_offsetof when supported   Jessica Clarke
  • [PATCH 1/1] include: types: Use __builtin_offsetof when supported   Anup Patel
• [PATCH v4 0/5] GPIO reset support   Green Wan
  • [PATCH v4 1/5] lib: utils/fdt: Add fdt_parse_phandle_with_args() API   Green Wan
  • [PATCH v4 2/5] lib: utils/gpio: Add generic GPIO configuration library   Green Wan
  • [PATCH v4 3/5] lib: utils/gpio: Add simple FDT based GPIO framework   Green Wan
  • [PATCH v4 4/5] lib: utils/gpio: Add minimal SiFive GPIO driver   Green Wan
  • [PATCH v4 0/5] GPIO reset support   Green Wan
    • [PATCH v4 1/5] lib: utils/fdt: Add fdt_parse_phandle_with_args() API   Green Wan
      • [PATCH v4 1/5] lib: utils/fdt: Add fdt_parse_phandle_with_args() API   Anup Patel
    • [PATCH v4 2/5] lib: utils/gpio: Add generic GPIO configuration library   Green Wan
      • [PATCH v4 2/5] lib: utils/gpio: Add generic GPIO configuration library   Anup Patel
    • [PATCH v4 3/5] lib: utils/gpio: Add simple FDT based GPIO framework   Green Wan
      • [PATCH v4 3/5] lib: utils/gpio: Add simple FDT based GPIO framework   Anup Patel
    • [PATCH v4 4/5] lib: utils/gpio: Add minimal SiFive GPIO driver   Green Wan
      • [PATCH v4 4/5] lib: utils/gpio: Add minimal SiFive GPIO driver   Anup Patel
    • [PATCH v4 5/5] lib: utils/reset: Add generic GPIO reset driver   Green Wan
      • [PATCH v4 5/5] lib: utils/reset: Add generic GPIO reset driver   Anup Patel
• [PATCH] firmware: use _fw_start for load address   Xiang W
  • [PATCH] firmware: use _fw_start for load address   Anup Patel
• [PATCH] generic: fu740: add workaround for CIP-1200 errata   Heinrich Schuchardt
  • [PATCH] generic: fu740: add workaround for CIP-1200 errata   Atish Patra
    • [PATCH] generic: fu740: add workaround for CIP-1200 errata   Anup Patel
• [PATCH 1/1] lib: utils: support multiple reset drivers of same type   Heinrich Schuchardt
  • [PATCH 1/1] lib: utils: support multiple reset drivers of same type   Jessica Clarke
    • [PATCH 1/1] lib: utils: support multiple reset drivers of same type   Heinrich Schuchardt
      • [PATCH 1/1] lib: utils: support multiple reset drivers of same type   Atish Patra
• [PATCH 0/2] lib: utils: support both of gpio-poweroff, gpio-reset   Heinrich Schuchardt
  • [PATCH 2/2] lib: utils: support both of gpio-poweroff, gpio-reset   Heinrich Schuchardt
    • [PATCH 2/2] lib: utils: support both of gpio-poweroff, gpio-reset   Atish Patra
      • [PATCH 2/2] lib: utils: support both of gpio-poweroff, gpio-reset   Anup Patel
    • [PATCH 2/2] lib: utils: support both of gpio-poweroff, gpio-reset   Jessica Clarke
      • [PATCH 2/2] lib: utils: support both of gpio-poweroff, gpio-reset   Heinrich Schuchardt
      • [PATCH 2/2] lib: utils: support both of gpio-poweroff, gpio-reset   Jessica Clarke
      • [PATCH 2/2] lib: utils: support both of gpio-poweroff, gpio-reset   Jessica Clarke
• [PATCH 1/2] lib: utils: remove unused variable in fdt_reset_init   Heinrich Schuchardt
  • [PATCH 1/2] lib: utils: remove unused variable in fdt_reset_init   Atish Patra
    • [PATCH 1/2] lib: utils: remove unused variable in fdt_reset_init   Anup Patel
• [PATCH 0/5] ACLINT MTIMER improvements   Anup Patel
  • [PATCH 1/5] lib: utils/timer: Allow separate base addresses for MTIME and MTIMECMP   Anup Patel
  • [PATCH 2/5] lib: utils: Extend fdt_get_node_addr_size() for multiple register sets   Anup Patel
  • [PATCH 3/5] lib: utils/fdt: Extend fdt_parse_aclint_node() function   Anup Patel
  • [PATCH 4/5] lib: utils/timer: Allow ACLINT MTIMER supporting only 32-bit MMIO   Anup Patel
  • [PATCH 5/5] lib: utils/timer: Simplify MTIMER synchronization   Anup Patel
• [PATCH] lib: sbi: Fix bug in strncmp function   Dong Du
  • [PATCH] lib: sbi: Fix bug in strncmp function   Dong Du
    • [PATCH] lib: sbi: Fix bug in strncmp function   Andreas Schwab
      • [PATCH] lib: sbi: Fix bug in strncmp function   杜东
• [PATCH v2] lib: sbi: Fix bug in strncmp function   Dong Du

Last message date: Fri Jul 30 03:46:02 PDT 2021
Archived on: Fri Jul 30 03:46:19 PDT 2021

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...