May 2021 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Fri Apr 30 16:42:14 PDT 2021
Ending: Mon May 31 22:22:33 PDT 2021
Messages: 933

• [BISECTED] nvme probe failure with v5.13-rc1   Verma, Vishal L
• [BISECTED] nvme probe failure with v5.13-rc1   Keith Busch
• [BISECTED] nvme probe failure with v5.13-rc1   Verma, Vishal L
• [BISECTED] nvme probe failure with v5.13-rc1   Keith Busch
• [bug report][regression] device node still exists after blktests nvme/011 finished   Yi Zhang
• [bug report][regression] device node still exists after blktests nvme/011 finished   Sagi Grimberg
• [bug report][regression] device node still exists after blktests nvme/011 finished   Hannes Reinecke
• [bug report][regression] device node still exists after blktests nvme/011 finished   Yi Zhang
• [bug report] blktests nvme/022 lead kernel WARNING and NULL pointer   Sagi Grimberg
• [bug report] blktests nvme/022 lead kernel WARNING and NULL pointer   Yi Zhang
• [bug report] blktests nvme/022 lead kernel WARNING and NULL pointer   Yi Zhang
• [bug report] blktests nvme/022 lead kernel WARNING and NULL pointer   Sagi Grimberg
• [bug report] blktests nvme/022 lead kernel WARNING and NULL pointer   Hannes Reinecke
• [bug report] blktests nvme/022 lead kernel WARNING and NULL pointer   Yi Zhang
• [bug report] blktests nvme/022 lead kernel WARNING and NULL pointer   Yi Zhang
• [bug report] blktests nvme/022 lead kernel WARNING and NULL pointer   Hannes Reinecke
• [bug report] blktests nvme/022 lead kernel WARNING and NULL pointer   Yi Zhang
• [bug report] blktests nvme/022 lead kernel WARNING and NULL pointer   Sagi Grimberg
• [bug report] blktests nvme/022 lead kernel WARNING and NULL pointer   Yi Zhang
• [bug report] blktests nvme/022 lead kernel WARNING and NULL pointer   Hannes Reinecke
• [bug report] NVMe/IB: reset_controller need more than 1min   Yi Zhang
• [bug report] NVMe/IB: reset_controller need more than 1min   Sagi Grimberg
• [bug report] NVMe/IB: reset_controller need more than 1min   Yi Zhang
• [bug report] nvme sends invalid command capsule over rdma transport for 5KiB write when target supports MSDBD > 1   Walker, Benjamin
• [bug report] nvme sends invalid command capsule over rdma transport for 5KiB write when target supports MSDBD > 1   Sagi Grimberg
• [bug report] nvme sends invalid command capsule over rdma transport for 5KiB write when target supports MSDBD > 1   Christoph Hellwig
• [bug report] nvme sends invalid command capsule over rdma transport for 5KiB write when target supports MSDBD > 1   Max Gurtovoy
• [bug report] nvme sends invalid command capsule over rdma transport for 5KiB write when target supports MSDBD > 1   Christoph Hellwig
• [bug report] nvme sends invalid command capsule over rdma transport for 5KiB write when target supports MSDBD > 1   Walker, Benjamin
• [bug report] nvme sends invalid command capsule over rdma transport for 5KiB write when target supports MSDBD > 1   Max Gurtovoy
• [bug report] nvme sends invalid command capsule over rdma transport for 5KiB write when target supports MSDBD > 1   Walker, Benjamin
• [bug report] nvme sends invalid command capsule over rdma transport for 5KiB write when target supports MSDBD > 1   Max Gurtovoy
• [dm-devel] [PATCH 01/26] block: refactor device number setup in __device_add_disk   Luis Chamberlain
• [dm-devel] [PATCH 01/26] block: refactor device number setup in __device_add_disk   Christoph Hellwig
• [dm-devel] [PATCH 02/26] block: move the DISK_MAX_PARTS sanity check into __device_add_disk   Luis Chamberlain
• [dm-devel] [PATCH 03/26] block: automatically enable GENHD_FL_EXT_DEVT   Luis Chamberlain
• [dm-devel] [PATCH 04/26] block: add a flag to make put_disk on partially initalized disks safer   Luis Chamberlain
• [dm-devel] [PATCH 05/26] block: add blk_alloc_disk and blk_cleanup_disk APIs   Luis Chamberlain
• [dm-devel] [PATCH 05/26] block: add blk_alloc_disk and blk_cleanup_disk APIs   Christoph Hellwig
• [GIT PULL] nvme fixes for Linux 5.13   Christoph Hellwig
• [GIT PULL] nvme fixes for Linux 5.13   Jens Axboe
• [GIT PULL] nvme fixes for Linux 5.13   Christoph Hellwig
• [GIT PULL] nvme fixes for Linux 5.13   Jens Axboe
• [GIT PULL] nvme fixes for Linux 5.13   Christoph Hellwig
• [GIT PULL] nvme fixes for Linux 5.13   Jens Axboe
• [linux-nvme:nvme-5.13 1/9] drivers/nvme/host/multipath.c:815 nvme_mpath_init_identify() warn: missing error code 'error'   Dan Carpenter
• [linux-nvme:nvme-5.13 4/4] drivers/nvme/host/multipath.c:810:6: warning: variable 'error' is used uninitialized whenever 'if' condition is true   kernel test robot
• [linux-nvme:nvme-5.13 4/4] drivers/nvme/host/multipath.c:810:6: warning: variable 'error' is used uninitialized whenever 'if' condition is true   kernel test robot
• [linux-nvme:nvme-5.13] BUILD SUCCESS 2869ad623d7df02dbc280744b879ca6e23ad1fe4   kernel test robot
• [linux-nvme:nvme-5.13] BUILD SUCCESS 4a20342572f66c5b20a1ee680f5ac0a13703748f   kernel test robot
• [linux-nvme:nvme-5.13] BUILD SUCCESS 77094a0082f4d57f45fbcd9e79e4bc354408604f   kernel test robot
• [linux-nvme:nvme-5.13] BUILD SUCCESS 85428beac80dbcace5b146b218697c73e367dcf5   kernel test robot
• [linux-nvme:nvme-5.13] BUILD SUCCESS a7d139145a6640172516b193abf6d2398620aa14   kernel test robot
• [linux-nvme:nvme-5.13] BUILD SUCCESS aaeadd7075dc9e184bc7876e9dd7b3bada771df2   kernel test robot
• [linux-nvme:nvme-5.13] BUILD SUCCESS WITH WARNING e181811bd04d874fe48bbfa1165a82068b58144d   kernel test robot
• [linux-nvme:nvme-5.14 4/21] ERROR: modpost: "blk_cleanup_queue" [drivers/nvme/host/nvme-tcp.ko] undefined!   kernel test robot
• [linux-nvme:nvme-5.14] BUILD SUCCESS 1c3aa9ad384db0f7e45fb6e1717b967f85e21bd8   kernel test robot
• [linux-nvme:nvme-5.14] BUILD SUCCESS 67dbcdc3689a25249092be0c851848efbcc62f38   kernel test robot
• [LSF/MM/BFP ATTEND] [LSF/MM/BFP TOPIC] Storage: Copy Offload   Chaitanya Kulkarni
• [LSF/MM/BFP ATTEND] [LSF/MM/BFP TOPIC] Storage: Copy Offload   Knight, Frederick
• [LSF/MM/BFP ATTEND] [LSF/MM/BFP TOPIC] Storage: Copy Offload   Bart Van Assche
• [LSF/MM/BFP ATTEND] [LSF/MM/BFP TOPIC] Storage: Copy Offload   Javier González
• [LSF/MM/BFP ATTEND] [LSF/MM/BFP TOPIC] Storage: Copy Offload   Johannes Thumshirn
• [LSF/MM/BFP ATTEND] [LSF/MM/BFP TOPIC] Storage: Copy Offload   Hannes Reinecke
• [LSF/MM/BFP ATTEND] [LSF/MM/BFP TOPIC] Storage: Copy Offload   Himanshu Madhani
• [LSF/MM/BFP ATTEND] [LSF/MM/BFP TOPIC] Storage: Copy Offload   Kanchan Joshi
• [LSF/MM/BFP ATTEND] [LSF/MM/BFP TOPIC] Storage: Copy Offload   Bart Van Assche
• [LSF/MM/BPF TOPIC] block namespaces   Hannes Reinecke
• [LSF/MM/BPF TOPIC] Memory folios   Matthew Wilcox
• [LSF/MM/BPF TOPIC] Memory folios   Christoph Hellwig
• [LSF/MM/BPF TOPIC] Memory folios   Keith Busch
• [LSF/MM/BPF TOPIC] Memory folios   Hannes Reinecke
• [PATCH 0/1] nvme-tcp: Add option to set the physical interface to be used when connecting over TCP sockets.   Martin Belanger
• [PATCH 0/1] nvme-tcp: Add option to set the physical interface to be used when connecting over TCP sockets.   Hannes Reinecke
• [PATCH 0/1] nvme: Export CSTS register via sysfs   Alan Adamson
• [PATCH 0/1] nvme: Export CSTS register via sysfs   Keith Busch
• [PATCH 0/1] nvme: Export CSTS register via sysfs   Alan Adamson
• [PATCH 0/1] nvme: Export CSTS register via sysfs   Keith Busch
• [PATCH 0/2] nvmet-tcp: fix connect error when inline data size to 0   Hou Pu
• [PATCH 0/2] nvmet: consider req->sg_cnt for inline bio   Christoph Hellwig
• [PATCH 0/2] nvmet: consider req->sg_cnt for inline bio   Sagi Grimberg
• [PATCH 0/2] nvmet: consider req->sg_cnt for inline bio   Chaitanya Kulkarni
• [PATCH 0/2] nvmet: consider req->sg_cnt for inline bio   Christoph Hellwig
• [PATCH 0/2] nvmet: Fix memory leak when create ctrl fails   Wu Bo
• [PATCH 0/2] nvmet: Fix memory leak when create ctrl fails   Christoph Hellwig
• [PATCH 0/3] nvemt: demote high frequency err msg to debug   Chaitanya Kulkarni
• [PATCH 0/3] nvemt: demote high frequency err msg to debug   Christoph Hellwig
• [PATCH 0/3] nvemt: demote high frequency err msg to debug   Chaitanya Kulkarni
• [PATCH 0/3] nvme: protect against possible request reference after completion   Sagi Grimberg
• [PATCH 0/3] nvme: protect against possible request reference after completion   Keith Busch
• [PATCH 0/4] nvme-fabrics: cleanup around nvmf_log_connect_error()   Chaitanya Kulkarni
• [PATCH 0/4] nvme-fabrics: cleanup around nvmf_log_connect_error()   Christoph Hellwig
• [PATCH 0/4] nvme-loop: fixes for concurrent reset and delete   Hannes Reinecke
• [PATCH 0/4] nvme: nidt and ns-desc related clanup   Chaitanya Kulkarni
• [PATCH 0/4] nvme: nidt and ns-desc related clanup   Christoph Hellwig
• [PATCH 0/4] nvme: nidt and ns-desc related clanup   Chaitanya Kulkarni
• [PATCH 00/16] Add new DMA mapping operation for P2PDMA   John Hubbard
• [PATCH 00/16] Add new DMA mapping operation for P2PDMA   Don Dutile
• [PATCH 01/15] direct-io: remove blk_poll support   Christoph Hellwig
• [PATCH 01/16] PCI/P2PDMA: Pass gfp_mask flags to upstream_bridge_distance_warn()   John Hubbard
• [PATCH 01/16] PCI/P2PDMA: Pass gfp_mask flags to upstream_bridge_distance_warn()   Logan Gunthorpe
• [PATCH 01/16] PCI/P2PDMA: Pass gfp_mask flags to upstream_bridge_distance_warn()   John Hubbard
• [PATCH 01/16] PCI/P2PDMA: Pass gfp_mask flags to upstream_bridge_distance_warn()   Logan Gunthorpe
• [PATCH 01/16] PCI/P2PDMA: Pass gfp_mask flags to upstream_bridge_distance_warn()   John Hubbard
• [PATCH 01/16] PCI/P2PDMA: Pass gfp_mask flags to upstream_bridge_distance_warn()   Christoph Hellwig
• [PATCH 01/16] PCI/P2PDMA: Pass gfp_mask flags to upstream_bridge_distance_warn()   Don Dutile
• [PATCH 01/16] PCI/P2PDMA: Pass gfp_mask flags to upstream_bridge_distance_warn()   Logan Gunthorpe
• [PATCH 01/16] PCI/P2PDMA: Pass gfp_mask flags to upstream_bridge_distance_warn()   Don Dutile
• [PATCH 01/26] block: refactor device number setup in __device_add_disk   Hannes Reinecke
• [PATCH 01/26] block: refactor device number setup in __device_add_disk   Christoph Hellwig
• [PATCH 02/15] block: don't try to poll multi-bio I/Os in __blkdev_direct_IO   Christoph Hellwig
• [PATCH 02/15] block: don't try to poll multi-bio I/Os in __blkdev_direct_IO   Sagi Grimberg
• [PATCH 02/15] block: don't try to poll multi-bio I/Os in __blkdev_direct_IO   Kanchan Joshi
• [PATCH 02/16] PCI/P2PDMA: Avoid pci_get_slot() which sleeps   John Hubbard
• [PATCH 02/16] PCI/P2PDMA: Avoid pci_get_slot() which sleeps   Logan Gunthorpe
• [PATCH 02/16] PCI/P2PDMA: Avoid pci_get_slot() which sleeps   John Hubbard
• [PATCH 02/16] PCI/P2PDMA: Avoid pci_get_slot() which sleeps   Christoph Hellwig
• [PATCH 02/16] PCI/P2PDMA: Avoid pci_get_slot() which sleeps   Don Dutile
• [PATCH 02/16] PCI/P2PDMA: Avoid pci_get_slot() which sleeps   Don Dutile
• [PATCH 02/16] PCI/P2PDMA: Avoid pci_get_slot() which sleeps   Logan Gunthorpe
• [PATCH 02/16] PCI/P2PDMA: Avoid pci_get_slot() which sleeps   Logan Gunthorpe
• [PATCH 02/26] block: move the DISK_MAX_PARTS sanity check into __device_add_disk   Hannes Reinecke
• [PATCH 03/15] iomap: don't try to poll multi-bio I/Os in __iomap_dio_rw   Christoph Hellwig
• [PATCH 03/15] iomap: don't try to poll multi-bio I/Os in __iomap_dio_rw   Darrick J. Wong
• [PATCH 03/16] PCI/P2PDMA: Attempt to set map_type if it has not been set   John Hubbard
• [PATCH 03/16] PCI/P2PDMA: Attempt to set map_type if it has not been set   Logan Gunthorpe
• [PATCH 03/16] PCI/P2PDMA: Attempt to set map_type if it has not been set   John Hubbard
• [PATCH 03/16] PCI/P2PDMA: Attempt to set map_type if it has not been set   Christoph Hellwig
• [PATCH 03/16] PCI/P2PDMA: Attempt to set map_type if it has not been set   Logan Gunthorpe
• [PATCH 03/16] PCI/P2PDMA: Attempt to set map_type if it has not been set   Don Dutile
• [PATCH 03/26] block: automatically enable GENHD_FL_EXT_DEVT   Hannes Reinecke
• [PATCH 04/15] blk-mq: factor out a blk_qc_to_hctx helper   Christoph Hellwig
• [PATCH 04/15] blk-mq: factor out a blk_qc_to_hctx helper   Sagi Grimberg
• [PATCH 04/16] PCI/P2PDMA: Refactor pci_p2pdma_map_type() to take pagmap and device   John Hubbard
• [PATCH 04/16] PCI/P2PDMA: Refactor pci_p2pdma_map_type() to take pagmap and device   Logan Gunthorpe
• [PATCH 04/16] PCI/P2PDMA: Refactor pci_p2pdma_map_type() to take pagmap and device   John Hubbard
• [PATCH 04/16] PCI/P2PDMA: Refactor pci_p2pdma_map_type() to take pagmap and device   Logan Gunthorpe
• [PATCH 04/16] PCI/P2PDMA: Refactor pci_p2pdma_map_type() to take pagmap and device   John Hubbard
• [PATCH 04/16] PCI/P2PDMA: Refactor pci_p2pdma_map_type() to take pagmap and device   Jason Gunthorpe
• [PATCH 04/16] PCI/P2PDMA: Refactor pci_p2pdma_map_type() to take pagmap and device   John Hubbard
• [PATCH 04/26] block: add a flag to make put_disk on partially initalized disks safer   Hannes Reinecke
• [PATCH 05/15] blk-mq: factor out a "classic" poll helper   Christoph Hellwig
• [PATCH 05/15] blk-mq: factor out a "classic" poll helper   Sagi Grimberg
• [PATCH 05/16] dma-mapping: Introduce dma_map_sg_p2pdma()   John Hubbard
• [PATCH 05/16] dma-mapping: Introduce dma_map_sg_p2pdma()   Logan Gunthorpe
• [PATCH 05/16] dma-mapping: Introduce dma_map_sg_p2pdma()   Christoph Hellwig
• [PATCH 05/16] dma-mapping: Introduce dma_map_sg_p2pdma()   Logan Gunthorpe
• [PATCH 05/16] dma-mapping: Introduce dma_map_sg_p2pdma()   Don Dutile
• [PATCH 05/26] block: add blk_alloc_disk and blk_cleanup_disk APIs   Hannes Reinecke
• [PATCH 06/15] blk-mq: remove blk_qc_t_to_tag and blk_qc_t_is_internal   Christoph Hellwig
• [PATCH 06/15] blk-mq: remove blk_qc_t_to_tag and blk_qc_t_is_internal   Sagi Grimberg
• [PATCH 06/16] lib/scatterlist: Add flag for indicating P2PDMA segments in an SGL   John Hubbard
• [PATCH 06/26] brd: convert to blk_alloc_disk/blk_cleanup_disk   Hannes Reinecke
• [PATCH 06/26] brd: convert to blk_alloc_disk/blk_cleanup_disk   Christoph Hellwig
• [PATCH 07/15] blk-mq: remove blk_qc_t_valid   Christoph Hellwig
• [PATCH 07/15] blk-mq: remove blk_qc_t_valid   Sagi Grimberg
• [PATCH 07/16] PCI/P2PDMA: Make pci_p2pdma_map_type() non-static   John Hubbard
• [PATCH 07/16] PCI/P2PDMA: Make pci_p2pdma_map_type() non-static   Logan Gunthorpe
• [PATCH 07/16] PCI/P2PDMA: Make pci_p2pdma_map_type() non-static   Don Dutile
• [PATCH 07/16] PCI/P2PDMA: Make pci_p2pdma_map_type() non-static   Logan Gunthorpe
• [PATCH 07/26] drbd: convert to blk_alloc_disk/blk_cleanup_disk   Hannes Reinecke
• [PATCH 08/15] io_uring: don't sleep when polling for I/O   Christoph Hellwig
• [PATCH 08/15] io_uring: don't sleep when polling for I/O   Sagi Grimberg
• [PATCH 08/15] io_uring: don't sleep when polling for I/O   Christoph Hellwig
• [PATCH 08/16] PCI/P2PDMA: Introduce helpers for dma_map_sg implementations   John Hubbard
• [PATCH 08/16] PCI/P2PDMA: Introduce helpers for dma_map_sg implementations   John Hubbard
• [PATCH 08/16] PCI/P2PDMA: Introduce helpers for dma_map_sg implementations   Logan Gunthorpe
• [PATCH 08/26] pktcdvd: convert to blk_alloc_disk/blk_cleanup_disk   Hannes Reinecke
• [PATCH 09/15] block: rename REQ_HIPRI to REQ_POLLED   Christoph Hellwig
• [PATCH 09/15] block: rename REQ_HIPRI to REQ_POLLED   Sagi Grimberg
• [PATCH 09/15] block: rename REQ_HIPRI to REQ_POLLED   Chaitanya Kulkarni
• [PATCH 09/16] dma-direct: Support PCI P2PDMA pages in dma-direct map_sg   John Hubbard
• [PATCH 09/16] dma-direct: Support PCI P2PDMA pages in dma-direct map_sg   John Hubbard
• [PATCH 09/16] dma-direct: Support PCI P2PDMA pages in dma-direct map_sg   Logan Gunthorpe
• [PATCH 09/16] dma-direct: Support PCI P2PDMA pages in dma-direct map_sg   Logan Gunthorpe
• [PATCH 09/16] dma-direct: Support PCI P2PDMA pages in dma-direct map_sg   Logan Gunthorpe
• [PATCH 09/16] dma-direct: Support PCI P2PDMA pages in dma-direct map_sg   John Hubbard
• [PATCH 09/16] dma-direct: Support PCI P2PDMA pages in dma-direct map_sg   John Hubbard
• [PATCH 09/26] rsxx: convert to blk_alloc_disk/blk_cleanup_disk   Hannes Reinecke
• [PATCH 1/1] Add 'Transport Interface' (triface) option. This can be used to specify the IP interface to use for the connection. The driver uses that to set SO_BINDTODEVICE on the socket before connecting.   Hannes Reinecke
• [PATCH 1/1] Add 'Transport Interface' (triface) option. This can be used to specify the IP interface to use for the connection. The driver uses that to set SO_BINDTODEVICE on the socket before connecting.   Belanger, Martin
• [PATCH 1/1] Add 'Transport Interface' (triface) option. This can be used to specify the IP interface to use for the connection. The driver uses that to set SO_BINDTODEVICE on the socket before connecting.   Hannes Reinecke
• [PATCH 1/1] Add 'Transport Interface' (triface) option. This can be used to specify the IP interface to use for the connection. The driver uses that to set SO_BINDTODEVICE on the socket before connecting.   Sagi Grimberg
• [PATCH 1/1] Add 'Transport Interface' (triface) option. This can be used to specify the IP interface to use for the connection. The driver uses that to set SO_BINDTODEVICE on the socket before connecting.   Hannes Reinecke
• [PATCH 1/1] Add 'Transport Interface' (triface) option. This can be used to specify the IP interface to use for the connection. The driver uses that to set SO_BINDTODEVICE on the socket before connecting.   Belanger, Martin
• [PATCH 1/1] Add 'Transport Interface' (triface) option. This can be used to specify the IP interface to use for the connection. The driver uses that to set SO_BINDTODEVICE on the socket before connecting.   James Smart
• [PATCH 1/1] Add 'Transport Interface' (triface) option. This can be used to specify the IP interface to use for the connection. The driver uses that to set SO_BINDTODEVICE on the socket before connecting.   Sagi Grimberg
• [PATCH 1/1] Add 'Transport Interface' (triface) option. This can be used to specify the IP interface to use for the connection. The driver uses that to set SO_BINDTODEVICE on the socket before connecting.   Hannes Reinecke
• [PATCH 1/1] Add 'Transport Interface' (triface) option. This can be used to specify the IP interface to use for the connection. The driver uses that to set SO_BINDTODEVICE on the socket before connecting.   Hannes Reinecke
• [PATCH 1/1] Add 'Transport Interface' (triface) option. This can be used to specify the IP interface to use for the connection. The driver uses that to set SO_BINDTODEVICE on the socket before connecting.   Belanger, Martin
• [PATCH 1/1] Add 'Transport Interface' (triface) option. This can be used to specify the IP interface to use for the connection. The driver uses that to set SO_BINDTODEVICE on the socket before connecting.   Michael Christie
• [PATCH 1/1] Add 'Transport Interface' (triface) option. This can be used to specify the IP interface to use for the connection. The driver uses that to set SO_BINDTODEVICE on the socket before connecting.   Sagi Grimberg
• [PATCH 1/1] Add 'Transport Interface' (triface) option. This can be used to specify the IP interface to use for the connection. The driver uses that to set SO_BINDTODEVICE on the socket before connecting.   Belanger, Martin
• [PATCH 1/1] Add 'Transport Interface' (triface) option. This can be used to specify the IP interface to use for the connection. The driver uses that to set SO_BINDTODEVICE on the socket before connecting.   Sagi Grimberg
• [PATCH 1/1] Add 'Transport Interface' (triface) option. This can be used to specify the IP interface to use for the connection. The driver uses that to set SO_BINDTODEVICE on the socket before connecting.   Belanger, Martin
• [PATCH 1/1] Add 'Transport Interface' (triface) option. This can be used to specify the IP interface to use for the connection. The driver uses that to set SO_BINDTODEVICE on the socket before connecting.   Sagi Grimberg
• [PATCH 1/1] Add 'Transport Interface' (triface) option. This can be used to specify the IP interface to use for the connection. The driver uses that to set SO_BINDTODEVICE on the socket before connecting.   Belanger, Martin
• [PATCH 1/1] Add 'Transport Interface' (triface) option. This can be used to specify the IP interface to use for the connection. The driver uses that to set SO_BINDTODEVICE on the socket before connecting.   Sagi Grimberg
• [PATCH 1/1] Add 'Transport Interface' (triface) option. This can be used to specify the IP interface to use for the connection. The driver uses that to set SO_BINDTODEVICE on the socket before connecting.   Hannes Reinecke
• [PATCH 1/1] Add 'Transport Interface' (triface) option. This can be used to specify the IP interface to use for the connection. The driver uses that to set SO_BINDTODEVICE on the socket before connecting.   Belanger, Martin
• [PATCH 1/1] Add 'Transport Interface' (triface) option. This can be used to specify the IP interface to use for the connection. The driver uses that to set SO_BINDTODEVICE on the socket before connecting.   Sagi Grimberg
• [PATCH 1/1] nvme-fabrics: Generate uevent on namespace AENs   Christoph Hellwig
• [PATCH 1/1] nvme-fabrics: Generate uevent on namespace AENs   Rao, Vinay
• [PATCH 1/1] nvme-fabrics: Generate uevent on namespace AENs   Chaitanya Kulkarni
• [PATCH 1/1] nvme-fabrics: Generate uevent on namespace AENs   Chaitanya Kulkarni
• [PATCH 1/1] nvme-fabrics: Generate uevent on namespace AENs   Rao, Vinay
• [PATCH 1/1] nvme-fabrics: Generate uevent on namespace AENs   Rao, Vinay
• [PATCH 1/1] nvme-tcp: Add option to set the physical interface to be used when connecting over TCP sockets.   Martin Belanger
• [PATCH 1/1] nvme-tcp: Add option to set the physical interface to be used when connecting over TCP sockets.   Hannes Reinecke
• [PATCH 1/1] nvme: extend and modify the APST configuration algorithm   hch at lst.de
• [PATCH 1/2] nvmet-tcp: fix inline data size comparison in nvmet_tcp_queue_response   Hou Pu
• [PATCH 1/2] nvmet-tcp: fix inline data size comparison in nvmet_tcp_queue_response   Sagi Grimberg
• [PATCH 1/2] nvmet-tcp: fix inline data size comparison in nvmet_tcp_queue_response   Hou Pu
• [PATCH 1/2] nvmet-tcp: fix inline data size comparison in nvmet_tcp_queue_response   Christoph Hellwig
• [PATCH 1/2] nvmet: check sg_cnt for inline bio for bdev-ns   Sagi Grimberg
• [PATCH 1/2] nvmet: check sg_cnt for inline bio for bdev-ns   Chaitanya Kulkarni
• [PATCH 1/2] nvmet: check sg_cnt for inline bio for bdev-ns   hch at lst.de
• [PATCH 1/2] nvmet: Fix memory leak in nvmet_alloc_ctrl()   Chaitanya Kulkarni
• [PATCH 1/2] nvmet: Fix memory leak in nvmet_alloc_ctrl()   Wu Bo
• [PATCH 1/3] nvme-tcp: don't check blk_mq_tag_to_rq when receiving pdu data   Sagi Grimberg
• [PATCH 1/3] nvme-tcp: don't check blk_mq_tag_to_rq when receiving pdu data   Christoph Hellwig
• [PATCH 1/4] nvme-fabrics: fix comment nvmf_log_connect_error()   Chaitanya Kulkarni
• [PATCH 1/4] nvme/loop: reset queue count to 1 in nvme_loop_destroy_io_queues()   Hannes Reinecke
• [PATCH 1/4] nvme: calculate data offset once for ns-desc   Chaitanya Kulkarni
• [PATCH 1/7] nvme: open code nvme_put_ns_from_disk in nvme_ns_head_chr_ioctl   Christoph Hellwig
• [PATCH 10/15] block: use SLAB_TYPESAFE_BY_RCU for the bio slab   Christoph Hellwig
• [PATCH 10/16] dma-mapping: Add flags to dma_map_ops to indicate PCI P2PDMA support   John Hubbard
• [PATCH 10/16] dma-mapping: Add flags to dma_map_ops to indicate PCI P2PDMA support   Logan Gunthorpe
• [PATCH 10/16] dma-mapping: Add flags to dma_map_ops to indicate PCI P2PDMA support   Don Dutile
• [PATCH 10/16] dma-mapping: Add flags to dma_map_ops to indicate PCI P2PDMA support   Logan Gunthorpe
• [PATCH 10/26] zram: convert to blk_alloc_disk/blk_cleanup_disk   Hannes Reinecke
• [PATCH 11/15] block: define 'struct bvec_iter' as packed   Christoph Hellwig
• [PATCH 11/15] block: define 'struct bvec_iter' as packed   Sagi Grimberg
• [PATCH 11/16] iommu/dma: Support PCI P2PDMA pages in dma-iommu map_sg   John Hubbard
• [PATCH 11/16] iommu/dma: Support PCI P2PDMA pages in dma-iommu map_sg   Logan Gunthorpe
• [PATCH 11/16] iommu/dma: Support PCI P2PDMA pages in dma-iommu map_sg   Don Dutile
• [PATCH 11/16] iommu/dma: Support PCI P2PDMA pages in dma-iommu map_sg   Logan Gunthorpe
• [PATCH 11/26] lightnvm: convert to blk_alloc_disk/blk_cleanup_disk   Hannes Reinecke
• [PATCH 12/15] block: switch polling to be bio based   Christoph Hellwig
• [PATCH 12/15] block: switch polling to be bio based   Sagi Grimberg
• [PATCH 12/15] block: switch polling to be bio based   Keith Busch
• [PATCH 12/15] block: switch polling to be bio based   Ming Lei
• [PATCH 12/15] block: switch polling to be bio based   Ming Lei
• [PATCH 12/15] block: switch polling to be bio based   Keith Busch
• [PATCH 12/15] block: switch polling to be bio based   Keith Busch
• [PATCH 12/15] block: switch polling to be bio based   Christoph Hellwig
• [PATCH 12/16] nvme-pci: Check DMA ops when indicating support for PCI P2PDMA   John Hubbard
• [PATCH 12/16] nvme-pci: Check DMA ops when indicating support for PCI P2PDMA   Logan Gunthorpe
• [PATCH 12/16] nvme-pci: Check DMA ops when indicating support for PCI P2PDMA   John Hubbard
• [PATCH 12/26] bcache: convert to blk_alloc_disk/blk_cleanup_disk   Hannes Reinecke
• [PATCH 12/26] bcache: convert to blk_alloc_disk/blk_cleanup_disk   Coly Li
• [PATCH 13/15] block: don't allow writing to the poll queue attribute   Christoph Hellwig
• [PATCH 13/15] block: don't allow writing to the poll queue attribute   Sagi Grimberg
• [PATCH 13/16] nvme-pci: Convert to using dma_map_sg_p2pdma for p2pdma pages   John Hubbard
• [PATCH 13/16] nvme-pci: Convert to using dma_map_sg_p2pdma for p2pdma pages   Logan Gunthorpe
• [PATCH 13/16] nvme-pci: Convert to using dma_map_sg_p2pdma for p2pdma pages   John Hubbard
• [PATCH 13/26] dm: convert to blk_alloc_disk/blk_cleanup_disk   Hannes Reinecke
• [PATCH 13/26] dm: convert to blk_alloc_disk/blk_cleanup_disk   Christoph Hellwig
• [PATCH 14/15] nvme-multipath: set QUEUE_FLAG_NOWAIT   Christoph Hellwig
• [PATCH 14/16] nvme-rdma: Ensure dma support when using p2pdma   John Hubbard
• [PATCH 14/26] md: convert to blk_alloc_disk/blk_cleanup_disk   Hannes Reinecke
• [PATCH 14/26] md: convert to blk_alloc_disk/blk_cleanup_disk   Christoph Hellwig
• [PATCH 14/26] md: convert to blk_alloc_disk/blk_cleanup_disk   Hannes Reinecke
• [PATCH 15/15] nvme-multipath: enable polled I/O   Christoph Hellwig
• [PATCH 15/15] nvme-multipath: enable polled I/O   Sagi Grimberg
• [PATCH 15/15] nvme-multipath: enable polled I/O   Keith Busch
• [PATCH 15/26] nvdimm-blk: convert to blk_alloc_disk/blk_cleanup_disk   Hannes Reinecke
• [PATCH 16/26] nvdimm-btt: convert to blk_alloc_disk/blk_cleanup_disk   Hannes Reinecke
• [PATCH 17/26] nvdimm-pmem: convert to blk_alloc_disk/blk_cleanup_disk   Hannes Reinecke
• [PATCH 18/26] nvme-multipath: convert to blk_alloc_disk/blk_cleanup_disk   Hannes Reinecke
• [PATCH 18/26] nvme-multipath: convert to blk_alloc_disk/blk_cleanup_disk   Christoph Hellwig
• [PATCH 19/26] nfblock: convert to blk_alloc_disk/blk_cleanup_disk   Geert Uytterhoeven
• [PATCH 19/26] nfblock: convert to blk_alloc_disk/blk_cleanup_disk   Hannes Reinecke
• [PATCH 2/2] nvme-loop: Fix memory leak in nvme_loop_create_ctrl()   Chaitanya Kulkarni
• [PATCH 2/2] nvme-loop: Fix memory leak in nvme_loop_create_ctrl()   Wu Bo
• [PATCH 2/2] nvmet-tcp: fix connect error when setting param_inline_data_size to zero.   Hou Pu
• [PATCH 2/2] nvmet-tcp: fix connect error when setting param_inline_data_size to zero.   Sagi Grimberg
• [PATCH 2/2] nvmet-tcp: fix connect error when setting param_inline_data_size to zero.   Hou Pu
• [PATCH 2/2] nvmet-tcp: fix connect error when setting param_inline_data_size to zero.   Sagi Grimberg
• [PATCH 2/2] nvmet-tcp: fix connect error when setting param_inline_data_size to zero.   Hou Pu
• [PATCH 2/2] nvmet: check sg_cnt for inline bio for passthru   Sagi Grimberg
• [PATCH 2/3] nvme-pci: limit maximum queue depth to 4095   Sagi Grimberg
• [PATCH 2/3] nvme-pci: limit maximum queue depth to 4095   Christoph Hellwig
• [PATCH 2/4] nvme-core: add a helper to get the len from nid   Chaitanya Kulkarni
• [PATCH 2/4] nvme-fabrics: remove extra new lines in the switch   Chaitanya Kulkarni
• [PATCH 2/4] nvme/loop: clear NVME_LOOP_Q_LIVE when nvme_loop_configure_admin_queue() fails   Hannes Reinecke
• [PATCH 2/7] nvne: open code nvme_{get, put}_ns_from_disk in nvme_ns_head_ioctl   Christoph Hellwig
• [PATCH 20/26] simdisk: convert to blk_alloc_disk/blk_cleanup_disk   Hannes Reinecke
• [PATCH 21/26] n64cart: convert to blk_alloc_disk   Hannes Reinecke
• [PATCH 22/26] ps3vram: convert to blk_alloc_disk/blk_cleanup_disk   Hannes Reinecke
• [PATCH 23/26] dcssblk: convert to blk_alloc_disk/blk_cleanup_disk   Hannes Reinecke
• [PATCH 24/26] xpram: convert to blk_alloc_disk/blk_cleanup_disk   Hannes Reinecke
• [PATCH 25/26] null_blk: convert to blk_alloc_disk/blk_cleanup_disk   Hannes Reinecke
• [PATCH 26/26] block: unexport blk_alloc_queue   Hannes Reinecke
• [PATCH 3/3] nvme: code command_id with a genctr for use-after-free validation   Sagi Grimberg
• [PATCH 3/3] nvme: code command_id with a genctr for use-after-free validation   Keith Busch
• [PATCH 3/3] nvme: code command_id with a genctr for use-after-free validation   Bart Van Assche
• [PATCH 3/3] nvme: code command_id with a genctr for use-after-free validation   Keith Busch
• [PATCH 3/3] nvme: code command_id with a genctr for use-after-free validation   Sagi Grimberg
• [PATCH 3/3] nvme: code command_id with a genctr for use-after-free validation   Sagi Grimberg
• [PATCH 3/3] nvme: code command_id with a genctr for use-after-free validation   Bart Van Assche
• [PATCH 3/3] nvme: code command_id with a genctr for use-after-free validation   Sagi Grimberg
• [PATCH 3/3] nvme: code command_id with a genctr for use-after-free validation   Bart Van Assche
• [PATCH 3/3] nvme: code command_id with a genctr for use-after-free validation   Sagi Grimberg
• [PATCH 3/4] nvme-fabrics: remove extra comment   Chaitanya Kulkarni
• [PATCH 3/4] nvme/loop: check for NVME_LOOP_Q_LIVE in nvme_loop_destroy_admin_queue()   Hannes Reinecke
• [PATCH 3/4] nvmet: use nvme_nidt_len() helper for id-desc   Chaitanya Kulkarni
• [PATCH 3/7] nvme: open code nvme_put_ns_from_disk in nvme_ns_head_ctrl_ioctl   Christoph Hellwig
• [PATCH 4/4] nvme-core: remove the NVME_NIDT_XXX_LEN macros   Chaitanya Kulkarni
• [PATCH 4/4] nvme-fabrics: remove extra braces   Chaitanya Kulkarni
• [PATCH 4/4] nvme/loop: Do not warn for deleted controllers during reset   Hannes Reinecke
• [PATCH 4/7] nvme: add a sparse annotation to nvme_ns_head_ctrl_ioctl   Christoph Hellwig
• [PATCH 5/7] nvme: move the CSI sanity check into nvme_ns_report_zones   Christoph Hellwig
• [PATCH 6/7] nvme: split nvme_report_zones   Christoph Hellwig
• [PATCH 7/7] nvme: remove nvme_{get,put}_ns_from_disk   Christoph Hellwig
• [PATCH] fabrics: add fast_io_fail_tmo option   Sagi Grimberg
• [PATCH] fabrics: add fast_io_fail_tmo option   Hannes Reinecke
• [PATCH] fabrics: add fast_io_fail_tmo option   Keith Busch
• [PATCH] nvme-fabrics: decode host pathing error for connect   Hannes Reinecke
• [PATCH] nvme-fabrics: decode host pathing error for connect   Himanshu Madhani
• [PATCH] nvme-fabrics: decode host pathing error for connect   Sagi Grimberg
• [PATCH] nvme-fabrics: decode host pathing error for connect   Chaitanya Kulkarni
• [PATCH] nvme-fabrics: decode host pathing error for connect   Christoph Hellwig
• [PATCH] nvme-fc: clear q_live at beginning of association teardown   James Smart
• [PATCH] nvme-fc: clear q_live at beginning of association teardown   Sagi Grimberg
• [PATCH] nvme-fc: clear q_live at beginning of association teardown   Himanshu Madhani
• [PATCH] nvme-fc: clear q_live at beginning of association teardown   James Smart
• [PATCH] nvme-fc: clear q_live at beginning of association teardown   Sagi Grimberg
• [PATCH] nvme-fc: clear q_live at beginning of association teardown   Hannes Reinecke
• [PATCH] nvme-fc: clear q_live at beginning of association teardown   Christoph Hellwig
• [PATCH] nvme-multipath: call del_gendisk() in nvme_mpath_check_last_path()   Hannes Reinecke
• [PATCH] nvme-multipath: fix double initialization of ANA state   Christoph Hellwig
• [PATCH] nvme-multipath: fix double initialization of ANA state   Keith Busch
• [PATCH] nvme-multipath: fix double initialization of ANA state   Hannes Reinecke
• [PATCH] nvme-multipath: fix double initialization of ANA state   Sagi Grimberg
• [PATCH] nvme-multipath: fix double initialization of ANA state   Martin Wilck
• [PATCH] nvme-multipath: fix double initialization of ANA state   Martin Wilck
• [PATCH] nvme-multipath: fix double initialization of ANA state   Sagi Grimberg
• [PATCH] nvme-multipath: fix double initialization of ANA state   Christoph Hellwig
• [PATCH] nvme-multipath: fix double initialization of ANA state   Martin Wilck
• [PATCH] nvme-multipath: fix double initialization of ANA state   Martin Wilck
• [PATCH] nvme-multipath: Reset bi_disk to ns head when failover   Daniel Wagner
• [PATCH] nvme-multipath: Reset bi_disk to ns head when failover   Hannes Reinecke
• [PATCH] nvme-multipath: Reset bi_disk to ns head when failover   Christoph Hellwig
• [PATCH] nvme-multipath: Reset bi_disk to ns head when failover   kernel test robot
• [PATCH] nvme-pci: Avoid to go into d3cold if device can't use npss.   Koba Ko
• [PATCH] nvme-pci: Avoid to go into d3cold if device can't use npss.   Christoph Hellwig
• [PATCH] nvme-pci: Avoid to go into d3cold if device can't use npss.   Kai-Heng Feng
• [PATCH] nvme-pci: Avoid to go into d3cold if device can't use npss.   Bjorn Helgaas
• [PATCH] nvme-pci: Avoid to go into d3cold if device can't use npss.   Koba Ko
• [PATCH] nvme-pci: Avoid to go into d3cold if device can't use npss.   Keith Busch
• [PATCH] nvme-pci: Avoid to go into d3cold if device can't use npss.   Kai-Heng Feng
• [PATCH] nvme-pci: Avoid to go into d3cold if device can't use npss.   Christoph Hellwig
• [PATCH] nvme-pci: Avoid to go into d3cold if device can't use npss.   Kai-Heng Feng
• [PATCH] nvme-pci: Avoid to go into d3cold if device can't use npss.   Christoph Hellwig
• [PATCH] nvme-pci: Avoid to go into d3cold if device can't use npss.   Kai-Heng Feng
• [PATCH] nvme-pci: Avoid to go into d3cold if device can't use npss.   Bjorn Helgaas
• [PATCH] nvme-pci: Avoid to go into d3cold if device can't use npss.   Kai-Heng Feng
• [PATCH] nvme-pci: Avoid to go into d3cold if device can't use npss.   Christoph Hellwig
• [PATCH] nvme-pci: Avoid to go into d3cold if device can't use npss.   Kai-Heng Feng
• [PATCH] nvme-pci: set some AMD PCIe downstream storage device to D3 for s2idle   Prike Liang
• [PATCH] nvme-pci: set some AMD PCIe downstream storage device to D3 for s2idle   Christoph Hellwig
• [PATCH] nvme-pci: set some AMD PCIe downstream storage device to D3 for s2idle   Liang, Prike
• [PATCH] nvme-pci: set some AMD PCIe downstream storage device to D3 for s2idle   Christoph Hellwig
• [PATCH] nvme-pci: set some AMD PCIe downstream storage device to D3 for s2idle   Deucher, Alexander
• [PATCH] nvme-pci: set some AMD PCIe downstream storage device to D3 for s2idle   Hans de Goede
• [PATCH] nvme-pci: set some AMD PCIe downstream storage device to D3 for s2idle   Limonciello, Mario
• [PATCH] nvme-pci: set some AMD PCIe downstream storage device to D3 for s2idle   Deucher, Alexander
• [PATCH] nvme-pci: set some AMD PCIe downstream storage device to D3 for s2idle   Christoph Hellwig
• [PATCH] nvme-pci: set some AMD PCIe downstream storage device to D3 for s2idle   Limonciello, Mario
• [PATCH] nvme-pci: set some AMD PCIe downstream storage device to D3 for s2idle   Keith Busch
• [PATCH] nvme-pci: set some AMD PCIe downstream storage device to D3 for s2idle   Limonciello, Mario
• [PATCH] nvme-pci: set some AMD PCIe downstream storage device to D3 for s2idle   Keith Busch
• [PATCH] nvme-pci: set some AMD PCIe downstream storage device to D3 for s2idle   Keith Busch
• [PATCH] nvme-pci: set some AMD PCIe downstream storage device to D3 for s2idle   Chaitanya Kulkarni
• [PATCH] nvme-pci: set some AMD PCIe downstream storage device to D3 for s2idle   Limonciello, Mario
• [PATCH] nvme-pci: set some AMD PCIe downstream storage device to D3 for s2idle   Keith Busch
• [PATCH] nvme-pci: set some AMD PCIe downstream storage device to D3 for s2idle   Limonciello, Mario
• [PATCH] nvme-pci: set some AMD PCIe downstream storage device to D3 for s2idle   Hans de Goede
• [PATCH] nvme-pci: set some AMD PCIe downstream storage device to D3 for s2idle   Christoph Hellwig
• [PATCH] nvme-pci: set some AMD PCIe downstream storage device to D3 for s2idle   Keith Busch
• [PATCH] nvme-pci: set some AMD PCIe downstream storage device to D3 for s2idle   Rafael J. Wysocki
• [PATCH] nvme-pci: set some AMD PCIe downstream storage device to D3 for s2idle   Limonciello, Mario
• [PATCH] nvme-pci: set some AMD PCIe downstream storage device to D3 for s2idle   Rafael J. Wysocki
• [PATCH] nvme-pci: set some AMD PCIe downstream storage device to D3 for s2idle   Limonciello, Mario
• [PATCH] nvme-pci: set some AMD PCIe downstream storage device to D3 for s2idle   Limonciello, Mario
• [PATCH] nvme-rdma: fix in-casule data send for chained sgls   Sagi Grimberg
• [PATCH] nvme-rdma: fix in-casule data send for chained sgls   Chao Leng
• [PATCH] nvme-rdma: fix in-casule data send for chained sgls   Sagi Grimberg
• [PATCH] nvme-tcp: add command tracking trace events   Keith Busch
• [PATCH] nvme-tcp: add command tracking trace events   Sagi Grimberg
• [PATCH] nvme-tcp: Fix possible use-after-completion   Sagi Grimberg
• [PATCH] nvme-tcp: Fix possible use-after-completion   Christoph Hellwig
• [PATCH] nvme-tcp: remove incorrect Kconfig dep in BLK_DEV_NVME   Sagi Grimberg
• [PATCH] nvme-tcp: remove incorrect Kconfig dep in BLK_DEV_NVME   Chaitanya Kulkarni
• [PATCH] nvme-tcp: remove incorrect Kconfig dep in BLK_DEV_NVME   Max Gurtovoy
• [PATCH] nvme-tcp: remove incorrect Kconfig dep in BLK_DEV_NVME   Keith Busch
• [PATCH] nvme-tcp: remove incorrect Kconfig dep in BLK_DEV_NVME   Christoph Hellwig
• [PATCH] nvme-tcp: remove incorrect Kconfig dep in BLK_DEV_NVME   Christoph Hellwig
• [PATCH] nvme/fc: Short-circuit reconnect retries   Hannes Reinecke
• [PATCH] nvme/fc: Short-circuit reconnect retries   Himanshu Madhani
• [PATCH] nvme/fc: Short-circuit reconnect retries   Sagi Grimberg
• [PATCH] nvme/fc: Short-circuit reconnect retries   James Smart
• [PATCH] nvme/fc: Short-circuit reconnect retries   Hannes Reinecke
• [PATCH] nvme/fc: Short-circuit reconnect retries   Christoph Hellwig
• [PATCH] nvme: add 'iopolicy' module parameter   Hannes Reinecke
• [PATCH] nvme: allow to re-attach namespaces after all paths are down   Hannes Reinecke
• [PATCH] nvme: allow to re-attach namespaces after all paths are down   Keith Busch
• [PATCH] nvme: allow to re-attach namespaces after all paths are down   Sagi Grimberg
• [PATCH] nvme: allow to re-attach namespaces after all paths are down   Hannes Reinecke
• [PATCH] nvme: allow to re-attach namespaces after all paths are down   Hannes Reinecke
• [PATCH] nvme: allow to re-attach namespaces after all paths are down   Sagi Grimberg
• [PATCH] nvme: allow to re-attach namespaces after all paths are down   Keith Busch
• [PATCH] nvme: allow to re-attach namespaces after all paths are down   Hannes Reinecke
• [PATCH] nvme: allow to re-attach namespaces after all paths are down   Hannes Reinecke
• [PATCH] nvme: allow to re-attach namespaces after all paths are down   Sagi Grimberg
• [PATCH] nvme: do not try to reconfigure APST when the controller is not live   Hannes Reinecke
• [PATCH] nvme: fix potential memory leaks in nvme_cdev_add   Guoqing Jiang
• [PATCH] nvme: fix potential memory leaks in nvme_cdev_add   Sagi Grimberg
• [PATCH] nvme: fix potential memory leaks in nvme_cdev_add   Chaitanya Kulkarni
• [PATCH] nvme: fix potential memory leaks in nvme_cdev_add   Javier González
• [PATCH] nvme: fix potential memory leaks in nvme_cdev_add   Christoph Hellwig
• [PATCH] nvme: generate uevent once a multipath namespace is operational again   Hannes Reinecke
• [PATCH] nvme: generate uevent once a multipath namespace is operational again   Christoph Hellwig
• [PATCH] nvme: generate uevent once a multipath namespace is operational again   Hannes Reinecke
• [PATCH] nvme: Have NVME_FABRICS select NVME_CORE instead of transport drivers   Sagi Grimberg
• [PATCH] nvme: Have NVME_FABRICS select NVME_CORE instead of transport drivers   James Smart
• [PATCH] nvme: Have NVME_FABRICS select NVME_CORE instead of transport drivers   Chaitanya Kulkarni
• [PATCH] nvme: Look for StorageD3Enable on the actual acpi device as well as root port   Mario Limonciello
• [PATCH] nvme: Look for StorageD3Enable on the actual acpi device as well as root port   Christoph Hellwig
• [PATCH] nvme: remove redundant initialization of variable ret   Colin King
• [PATCH] nvme: remove redundant initialization of variable ret   Chaitanya Kulkarni
• [PATCH] nvme: remove redundant initialization of variable ret   Christoph Hellwig
• [PATCH] nvme: Use NN for max_namespaces if MNAN is zero   Daniel Wagner
• [PATCH] nvme: Use NN for max_namespaces if MNAN is zero   Daniel Wagner
• [PATCH] nvme: Use NN for max_namespaces if MNAN is zero   Keith Busch
• [PATCH] nvme: Use NN for max_namespaces if MNAN is zero   Sagi Grimberg
• [PATCH] nvme: Use NN for max_namespaces if MNAN is zero   Christoph Hellwig
• [PATCH] nvme: Use NN for max_namespaces if MNAN is zero   Daniel Wagner
• [PATCH] nvme: Use NN for max_namespaces if MNAN is zero   Christoph Hellwig
• [PATCH] nvme: Use NN for max_namespaces if MNAN is zero   Daniel Wagner
• [PATCH] nvme: verify MNAN value if ANA is enabled   Daniel Wagner
• [PATCH] nvme: verify MNAN value if ANA is enabled   Hannes Reinecke
• [PATCH] nvmet-rdma: Fix NULL deref when SEND is completed with error   Michal Kalderon
• [PATCH] nvmet-rdma: Fix NULL deref when SEND is completed with error   Sagi Grimberg
• [PATCH] nvmet-rdma: Fix NULL deref when SEND is completed with error   Christoph Hellwig
• [PATCH] nvmet-tcp: fix memory leak when having inflight commands on disconnect   elad.grupi at dell.com
• [PATCH] nvmet-tcp: fix memory leak when having inflight commands on disconnect   Sagi Grimberg
• [PATCH] nvmet-tcp: fix memory leak when having inflight commands on disconnect   Christoph Hellwig
• [PATCH] nvmet-tcp: fix memory leak when having inflight commands on disconnect   Grupi, Elad
• [PATCH] nvmet-tcp: fix memory leak when having inflight commands on disconnect   elad.grupi at dell.com
• [PATCH] nvmet/fc: do not check for invalid target port in nvmet_fc_handle_fcp_rqst()   Hannes Reinecke
• [PATCH] nvmet: allow setting ctrl to ready without iosqes/iocqes set   ran.anner at dell.com
• [PATCH] nvmet: allow setting ctrl to ready without iosqes/iocqes set   Chaitanya Kulkarni
• [PATCH] nvmet: allow setting ctrl to ready without iosqes/iocqes set   Christoph Hellwig
• [PATCH] nvmet: fix false keep-alive timeout when a controller is torn down   Sagi Grimberg
• [PATCH] nvmet: fix false keep-alive timeout when a controller is torn down   Hannes Reinecke
• [PATCH] nvmet: fix false keep-alive timeout when a controller is torn down   Chaitanya Kulkarni
• [PATCH] nvmet: fix false keep-alive timeout when a controller is torn down   Chaitanya Kulkarni
• [PATCH] nvmet: fix false keep-alive timeout when a controller is torn down   Yi Zhang
• [PATCH] nvmet: fix false keep-alive timeout when a controller is torn down   Christoph Hellwig
• [PATCH] nvmet: fix memory leak on nvmet_alloc_ctrl()   Wu Bo
• [PATCH] nvmet: fix memory leak on nvmet_alloc_ctrl()   Sagi Grimberg
• [PATCH] nvmet: fix memory leak on nvmet_alloc_ctrl()   Chaitanya Kulkarni
• [PATCH] nvmet: fix memory leak on nvmet_alloc_ctrl()   Wu Bo
• [PATCH] nvmet: move ka_work initialization to nvmet_alloc_ctrl   Christoph Hellwig
• [PATCH] nvmet: remove unsupported command noise   Christoph Hellwig
• [PATCH] nvmet: Reset ns->file when open fails   Daniel Wagner
• [PATCH] nvmet: Reset ns->file when open fails   kernel test robot
• [PATCH] nvmet: Reset ns->file when open fails   kernel test robot
• [PATCH] nvmet: Reset ns->file when open fails   kernel test robot
• [PATCH] nvmet: Reset ns->file when open fails   kernel test robot
• [PATCH] nvmet: use new ana_log_size instead the old one   Hou Pu
• [PATCH] nvmet: use new ana_log_size instead the old one   Hannes Reinecke
• [PATCH] nvmet: use new ana_log_size instead the old one   Hou Pu
• [PATCH AUTOSEL 4.19 2/2] nvmet: seset ns->file when open fails   Sasha Levin
• [PATCH AUTOSEL 5.10 27/34] nvmet: remove unsupported command noise   Sasha Levin
• [PATCH AUTOSEL 5.10 3/3] nvmet: seset ns->file when open fails   Sasha Levin
• [PATCH AUTOSEL 5.11 28/35] nvmet: remove unsupported command noise   Sasha Levin
• [PATCH AUTOSEL 5.11 3/3] nvmet: seset ns->file when open fails   Sasha Levin
• [PATCH AUTOSEL 5.12 30/37] nvmet: remove unsupported command noise   Sasha Levin
• [PATCH AUTOSEL 5.12 4/5] nvmet: seset ns->file when open fails   Sasha Levin
• [PATCH AUTOSEL 5.4 2/2] nvmet: seset ns->file when open fails   Sasha Levin
• [PATCH AUTOSEL 5.4 2/2] nvmet: seset ns->file when open fails   Chaitanya Kulkarni
• [PATCH AUTOSEL 5.4 2/2] nvmet: seset ns->file when open fails   Daniel Wagner
• [PATCH nvme-cli] systemd/nvmf-autoconnect.service: load nvme-fabrics before autoconnect   Sagi Grimberg
• [PATCH V2 0/2] nvmet: consider req->sg_cnt for inline bio   Chaitanya Kulkarni
• [PATCH V2 0/2] nvmet: consider req->sg_cnt for inline bio   Christoph Hellwig
• [PATCH V2 0/3] nvemt: demote high frequency err msg to debug   Chaitanya Kulkarni
• [PATCH V2 0/3] nvemt: demote high frequency err msg to debug   Christoph Hellwig
• [PATCH V2 0/3] nvemt: demote high frequency err msg to debug   Chaitanya Kulkarni
• [PATCH V2 0/3] Update Persistent Event Log   wenxiong at linux.vnet.ibm.com
• [PATCH v2 0/4] nvme: protect against possible request reference after completion   Sagi Grimberg
• [PATCH v2 00/22] Add new DMA mapping operation for P2PDMA   Logan Gunthorpe
• [PATCH v2 00/22] Add new DMA mapping operation for P2PDMA   Christoph Hellwig
• [PATCH v2 00/22] Add new DMA mapping operation for P2PDMA   Logan Gunthorpe
• [PATCH v2 01/22] PCI/P2PDMA: Rename upstream_bridge_distance() and rework documentation   Logan Gunthorpe
• [PATCH v2 02/22] PCI/P2PDMA: Use a buffer on the stack for collecting the acs list   Logan Gunthorpe
• [PATCH v2 03/22] PCI/P2PDMA: Cleanup type for return value of calc_map_type_and_dist()   Logan Gunthorpe
• [PATCH v2 04/22] PCI/P2PDMA: Avoid pci_get_slot() which sleeps   Logan Gunthorpe
• [PATCH v2 05/22] PCI/P2PDMA: Print a warning if the host bridge is not in the whitelist   Logan Gunthorpe
• [PATCH v2 06/22] PCI/P2PDMA: Attempt to set map_type if it has not been set   Logan Gunthorpe
• [PATCH v2 06/22] PCI/P2PDMA: Attempt to set map_type if it has not been set   Christoph Hellwig
• [PATCH v2 06/22] PCI/P2PDMA: Attempt to set map_type if it has not been set   Logan Gunthorpe
• [PATCH v2 07/22] PCI/P2PDMA: Refactor pci_p2pdma_map_type() to take pagemap and device   Logan Gunthorpe
• [PATCH v2 08/22] dma-mapping: Allow map_sg() ops to return negative error codes   Logan Gunthorpe
• [PATCH v2 08/22] dma-mapping: Allow map_sg() ops to return negative error codes   Christoph Hellwig
• [PATCH v2 08/22] dma-mapping: Allow map_sg() ops to return negative error codes   Logan Gunthorpe
• [PATCH v2 09/22] dma-direct: Return appropriate error code from dma_direct_map_sg()   Logan Gunthorpe
• [PATCHv2 1/1] nvme-tcp: Add option to set the physical interface to be used when connecting over TCP sockets.   Martin Belanger
• [PATCH V2 1/2] nvmet: fix inline bio check for bdev-ns   Chaitanya Kulkarni
• [PATCH V2 1/3] nvme-cli: Add event type as filter in persistent event   wenxiong at linux.vnet.ibm.com
• [PATCH V2 1/3] nvmet: demote discovery cmd parse err msg to debug   Chaitanya Kulkarni
• [PATCH v2 1/4] params: lift param_set_uint_minmax to common code   Sagi Grimberg
• [PATCH v2 1/4] params: lift param_set_uint_minmax to common code   Chaitanya Kulkarni
• [PATCH v2 1/4] params: lift param_set_uint_minmax to common code   Christoph Hellwig
• [PATCHv2 1/5] block: support polling through blk_execute_rq   Kanchan Joshi
• [PATCH v2 10/22] iommu: Return full error code from iommu_map_sg[_atomic]()   Logan Gunthorpe
• [PATCH v2 11/22] dma-iommu: Return error code from iommu_dma_map_sg()   Logan Gunthorpe
• [PATCH v2 12/22] lib/scatterlist: Add flag for indicating P2PDMA segments in an SGL   Logan Gunthorpe
• [PATCH v2 13/22] PCI/P2PDMA: Make pci_p2pdma_map_type() non-static   Logan Gunthorpe
• [PATCH v2 14/22] PCI/P2PDMA: Introduce helpers for dma_map_sg implementations   Logan Gunthorpe
• [PATCH v2 14/22] PCI/P2PDMA: Introduce helpers for dma_map_sg implementations   Christoph Hellwig
• [PATCH v2 14/22] PCI/P2PDMA: Introduce helpers for dma_map_sg implementations   Logan Gunthorpe
• [PATCH v2 15/22] dma-direct: Support PCI P2PDMA pages in dma-direct map_sg   Logan Gunthorpe
• [PATCH v2 15/22] dma-direct: Support PCI P2PDMA pages in dma-direct map_sg   Christoph Hellwig
• [PATCH v2 15/22] dma-direct: Support PCI P2PDMA pages in dma-direct map_sg   Logan Gunthorpe
• [PATCH v2 16/22] dma-mapping: Add flags to dma_map_ops to indicate PCI P2PDMA support   Logan Gunthorpe
• [PATCH v2 17/22] iommu/dma: Support PCI P2PDMA pages in dma-iommu map_sg   Logan Gunthorpe
• [PATCH v2 18/22] nvme-pci: Check DMA ops when indicating support for PCI P2PDMA   Logan Gunthorpe
• [PATCH v2 19/22] nvme-pci: Convert to using dma_map_sgtable()   Logan Gunthorpe
• [PATCH V2 2/2] nvmet: fix inline bio check for passthru   Chaitanya Kulkarni
• [PATCH V2 2/3] nvme-cli: Add set-feature(0xb) in persistent event log   wenxiong at linux.vnet.ibm.com
• [PATCH V2 2/3] nvmet: use helper to remove the duplicate code   Chaitanya Kulkarni
• [PATCH v2 2/4] nvme-pci: limit maximum queue depth to 4095   Sagi Grimberg
• [PATCH v2 2/4] nvme-pci: limit maximum queue depth to 4095   Chaitanya Kulkarni
• [PATCH v2 2/4] nvme-pci: limit maximum queue depth to 4095   Hannes Reinecke
• [PATCH v2 20/22] RDMA/core: Introduce ib_dma_pci_p2p_dma_supported()   Logan Gunthorpe
• [PATCH v2 21/22] RDMA/rw: use dma_map_sgtable()   Logan Gunthorpe
• [PATCH v2 22/22] PCI/P2PDMA: Remove pci_p2pdma_[un]map_sg()   Logan Gunthorpe
• [PATCH V2 3/3] nvme-cli: Update in persistent event pel code   wenxiong at linux.vnet.ibm.com
• [PATCH V2 3/3] nvmet: demote fabrics cmd parse err msg to debug   Chaitanya Kulkarni
• [PATCH v2 3/4] nvme-tcp: don't check blk_mq_tag_to_rq when receiving pdu data   Sagi Grimberg
• [PATCH v2 3/4] nvme-tcp: don't check blk_mq_tag_to_rq when receiving pdu data   Hannes Reinecke
• [PATCH v2 4/4] nvme: code command_id with a genctr for use-after-free validation   Sagi Grimberg
• [PATCH v2 4/4] nvme: code command_id with a genctr for use-after-free validation   Daniel Wagner
• [PATCH v2 4/4] nvme: code command_id with a genctr for use-after-free validation   Max Gurtovoy
• [PATCH v2 4/4] nvme: code command_id with a genctr for use-after-free validation   Keith Busch
• [PATCH v2 4/4] nvme: code command_id with a genctr for use-after-free validation   Chaitanya Kulkarni
• [PATCH v2 4/4] nvme: code command_id with a genctr for use-after-free validation   Sagi Grimberg
• [PATCH v2 4/4] nvme: code command_id with a genctr for use-after-free validation   Hannes Reinecke
• [PATCH v2 4/4] nvme: code command_id with a genctr for use-after-free validation   Hannes Reinecke
• [PATCH v2 4/4] nvme: code command_id with a genctr for use-after-free validation   Max Gurtovoy
• [PATCHv2 5/5] nvme: allow user passthrough commands to poll   Kanchan Joshi
• [PATCHv2 5/5] nvme: allow user passthrough commands to poll   Keith Busch
• [PATCHv2] nvme-mpath: delete disk after last connection   Hannes Reinecke
• [PATCH v2] nvme-multipath: Reset bdev to ns head when failover   Daniel Wagner
• [PATCH v2] nvme-multipath: Reset bdev to ns head when failover   Christoph Hellwig
• [PATCH v2] nvme-rdma: fix in-casule data send for chained sgls   Sagi Grimberg
• [PATCH v2] nvme-rdma: fix in-casule data send for chained sgls   Max Gurtovoy
• [PATCH v2] nvme-rdma: fix in-casule data send for chained sgls   Christoph Hellwig
• [PATCH v2] nvme-tcp: Check if request has started before processing it   Hannes Reinecke
• [PATCH v2] nvme-tcp: Check if request has started before processing it   Sagi Grimberg
• [PATCH v2] nvme-tcp: Check if request has started before processing it   Keith Busch
• [PATCH v2] nvme-tcp: Check if request has started before processing it   Sagi Grimberg
• [PATCH v2] nvme-tcp: Check if request has started before processing it   Keith Busch
• [PATCH v2] nvme-tcp: Check if request has started before processing it   Hannes Reinecke
• [PATCH v2] nvme-tcp: Check if request has started before processing it   Sagi Grimberg
• [PATCH v2] nvme-tcp: Check if request has started before processing it   Daniel Wagner
• [PATCHv2] nvme: allow to re-attach namespaces after all paths are down   Hannes Reinecke
• [PATCHv2] nvme: generate uevent once a multipath namespace is operational again   Hannes Reinecke
• [PATCHv2] nvme: generate uevent once a multipath namespace is operational again   Christoph Hellwig
• [PATCHv2] nvme: generate uevent once a multipath namespace is operational again   Sagi Grimberg
• [PATCHv2] nvme: generate uevent once a multipath namespace is operational again   Hannes Reinecke
• [PATCHv2] nvme: generate uevent once a multipath namespace is operational again   Christoph Hellwig
• [PATCHv2] nvme: generate uevent once a multipath namespace is operational again   Hannes Reinecke
• [PATCH v2] nvme: Look for StorageD3Enable on companion ACPI device instead   Mario Limonciello
• [PATCH v2] nvme: Look for StorageD3Enable on companion ACPI device instead   Christoph Hellwig
• [PATCH v2] nvme: Look for StorageD3Enable on companion ACPI device instead   Limonciello, Mario
• [PATCH v2] nvme: Look for StorageD3Enable on companion ACPI device instead   Bjorn Helgaas
• [PATCH v2] nvme: Look for StorageD3Enable on companion ACPI device instead   Raul Rangel
• [PATCH v2] nvme: Look for StorageD3Enable on companion ACPI device instead   Keith Busch
• [PATCH v2] nvme: Look for StorageD3Enable on companion ACPI device instead   Limonciello, Mario
• [PATCH v2] nvme: Look for StorageD3Enable on companion ACPI device instead   Christoph Hellwig
• [PATCH v2] nvmet: Reset ns->file when open fails   Daniel Wagner
• [PATCH v2] nvmet: Reset ns->file when open fails   Daniel Wagner
• [PATCH v3 0/2] Improvements to StorageD3Enable   Mario Limonciello
• [PATCHv3 0/4] block and nvme passthrough error handling   Keith Busch
• [PATCH v3 0/4] nvme: improve error handling and ana_state to work well with dm-multipath   Hannes Reinecke
• [PATCH v3 0/4] nvme: improve error handling and ana_state to work well with dm-multipath   Mike Snitzer
• [PATCHv3 1/1] nvme-tcp: Add option to set the physical interface to be used when connecting over TCP sockets.   Martin Belanger
• [PATCH v3 1/2] nvme: Look for StorageD3Enable on companion ACPI device instead   Mario Limonciello
• [PATCH v3 1/2] nvme: Look for StorageD3Enable on companion ACPI device instead   Christoph Hellwig
• [PATCH v3 1/2] nvme: Look for StorageD3Enable on companion ACPI device instead   N, Shyjumon
• [PATCHv3 1/4] block: support polling through blk_execute_rq   Keith Busch
• [PATCHv3 1/4] block: support polling through blk_execute_rq   Christoph Hellwig
• [PATCHv3 1/4] block: support polling through blk_execute_rq   Ming Lei
• [PATCH v3 2/2] acpi: Move check for _DSD StorageD3Enable property to acpi   Mario Limonciello
• [PATCH v3 2/2] acpi: Move check for _DSD StorageD3Enable property to acpi   Christoph Hellwig
• [PATCHv3 2/4] nvme: use blk_execute_rq() for passthrough commands   Keith Busch
• [PATCHv3 2/4] nvme: use blk_execute_rq() for passthrough commands   Christoph Hellwig
• [PATCHv3 2/4] nvme: use blk_execute_rq() for passthrough commands   Ming Lei
• [PATCHv3 2/4] nvme: use blk_execute_rq() for passthrough commands   Kanchan Joshi
• [PATCHv3 3/4] block: return errors from blk_execute_rq()   Keith Busch
• [PATCHv3 3/4] block: return errors from blk_execute_rq()   Christoph Hellwig
• [PATCHv3 3/4] block: return errors from blk_execute_rq()   Ming Lei
• [PATCHv3 4/4] nvme: use return value from blk_execute_rq()   Keith Busch
• [PATCHv3 4/4] nvme: use return value from blk_execute_rq()   Christoph Hellwig
• [PATCHv3] nvme-mpath: delete disk after last connection   Hannes Reinecke
• [PATCHv3] nvme-mpath: delete disk after last connection   Christoph Hellwig
• [PATCHv3] nvme-mpath: delete disk after last connection   Hannes Reinecke
• [PATCHv3] nvme-mpath: delete disk after last connection   Sagi Grimberg
• [PATCHv3] nvme-mpath: delete disk after last connection   Keith Busch
• [PATCHv3] nvme-mpath: delete disk after last connection   Hannes Reinecke
• [PATCHv3] nvme-mpath: delete disk after last connection   Sagi Grimberg
• [PATCHv3] nvme-mpath: delete disk after last connection   Keith Busch
• [PATCHv3] nvme-mpath: delete disk after last connection   Hannes Reinecke
• [PATCHv3] nvme-mpath: delete disk after last connection   Christoph Hellwig
• [PATCHv3] nvme-mpath: delete disk after last connection   Hannes Reinecke
• [PATCHv3] nvme-mpath: delete disk after last connection   Sagi Grimberg
• [PATCHv3] nvme-mpath: delete disk after last connection   Christoph Hellwig
• [PATCHv3] nvme-mpath: delete disk after last connection   Hannes Reinecke
• [PATCHv3] nvme-mpath: delete disk after last connection   Christoph Hellwig
• [PATCHv3] nvme-mpath: delete disk after last connection   Hannes Reinecke
• [PATCHv3] nvme-mpath: delete disk after last connection   Sagi Grimberg
• [PATCHv3] nvme-mpath: delete disk after last connection   Christoph Hellwig
• [PATCHv3] nvme-mpath: delete disk after last connection   Hannes Reinecke
• [PATCHv3] nvme-mpath: delete disk after last connection   Hannes Reinecke
• [PATCHv3] nvme-mpath: delete disk after last connection   Hannes Reinecke
• [PATCHv3] nvme: allow to re-attach namespaces after all paths are down   Hannes Reinecke
• [PATCHv3] nvme: allow to re-attach namespaces after all paths are down   Christoph Hellwig
• [PATCHv3] nvme: allow to re-attach namespaces after all paths are down   Hannes Reinecke
• [PATCHv3] nvme: generate uevent once a multipath namespace is operational again   Hannes Reinecke
• [PATCHv3] nvme: generate uevent once a multipath namespace is operational again   Sagi Grimberg
• [PATCHv3] nvme: generate uevent once a multipath namespace is operational again   Hannes Reinecke
• [PATCHv3] nvme: generate uevent once a multipath namespace is operational again   Christoph Hellwig
• [PATCHv3] nvme: generate uevent once a multipath namespace is operational again   Hannes Reinecke
• [PATCHv3] nvme: generate uevent once a multipath namespace is operational again   Sagi Grimberg
• [PATCHv3] nvme: generate uevent once a multipath namespace is operational again   Hannes Reinecke
• [PATCHv3] nvme: generate uevent once a multipath namespace is operational again   Sagi Grimberg
• [PATCHv3] nvme: generate uevent once a multipath namespace is operational again   Hannes Reinecke
• [PATCHv3] nvme: generate uevent once a multipath namespace is operational again   Sagi Grimberg
• [PATCH v3] nvmet: Reset ns->file when open fails   Daniel Wagner
• [PATCH v3] nvmet: Reset ns->file when open fails   Christoph Hellwig
• [PATCH v3] nvmet: Reset ns->file when open fails   Daniel Wagner
• [PATCHv4 1/1] nvme-tcp: Add option to set the physical interface to be used when connecting over TCP sockets.   Martin Belanger
• [PATCHv4 1/1] nvme-tcp: Add option to set the physical interface to be used when connecting over TCP sockets.   Hannes Reinecke
• [PATCH v4 1/2] PCI: add AMD PCIe quirk for nvme shutdown opt   Christoph Hellwig
• [PATCH v4 1/2] PCI: add AMD PCIe quirk for nvme shutdown opt   Keith Busch
• [PATCH v4 1/2] PCI: add AMD PCIe quirk for nvme shutdown opt   Bjorn Helgaas
• [PATCH v4 1/2] PCI: add AMD PCIe quirk for nvme shutdown opt   Liang, Prike
• [PATCHv4] nvme: allow to re-attach namespaces after all paths are down   Hannes Reinecke
• [PATCHv4] nvme: allow to re-attach namespaces after all paths are down   Keith Busch
• [PATCHv4] nvme: allow to re-attach namespaces after all paths are down   Hannes Reinecke
• [PATCHv4] nvme: allow to re-attach namespaces after all paths are down   Keith Busch
• [PATCHv4] nvme: allow to re-attach namespaces after all paths are down   Sagi Grimberg
• [PATCHv4] nvme: allow to re-attach namespaces after all paths are down   Keith Busch
• [PATCHv4] nvme: allow to re-attach namespaces after all paths are down   Sagi Grimberg
• [PATCHv4] nvme: allow to re-attach namespaces after all paths are down   Christoph Hellwig
• [PATCHv4] nvme: allow to re-attach namespaces after all paths are down   Hannes Reinecke
• [PATCHv4] nvme: allow to re-attach namespaces after all paths are down   Christoph Hellwig
• [PATCH v4] nvme: rdma/tcp: fix list corruption with anatt timer   Christoph Hellwig
• [PATCH v4] nvme: rdma/tcp: fix list corruption with anatt timer   Martin Wilck
• [PATCH v5 0/2] nvme-pci: add AMD PCIe quirk for NVMe simple suspend/resume   Prike Liang
• [PATCH v5 0/2] nvme-pci: add AMD PCIe quirk for NVMe simple suspend/resume   Christoph Hellwig
• [PATCHv5 1/1] nvme-tcp: Add option to set the physical interface to be used when connecting over TCP sockets.   Martin Belanger
• [PATCHv5 1/1] nvme-tcp: Add option to set the physical interface to be used when connecting over TCP sockets.   Hannes Reinecke
• [PATCHv5 1/1] nvme-tcp: Add option to set the physical interface to be used when connecting over TCP sockets.   Sagi Grimberg
• [PATCHv5 1/1] nvme-tcp: Add option to set the physical interface to be used when connecting over TCP sockets.   Belanger, Martin
• [PATCH v5 1/2] PCI: add AMD PCIe quirk for nvme shutdown opt   Liang, Prike
• [PATCH v5 1/2] PCI: add AMD PCIe quirk for nvme shutdown opt   Liang, Prike
• [PATCH v5 1/2] PCI: add AMD PCIe quirk for nvme shutdown opt   Prike Liang
• [PATCH v5 1/2] PCI: add AMD PCIe quirk for nvme shutdown opt   Bjorn Helgaas
• [PATCH v5 1/2] PCI: add AMD PCIe quirk for nvme shutdown opt   Liang, Prike
• [PATCH v5 1/2] PCI: add AMD PCIe quirk for nvme shutdown opt   Bjorn Helgaas
• [PATCH v5 1/2] PCI: add AMD PCIe quirk for nvme shutdown opt   Deucher, Alexander
• [PATCH v5 1/2] PCI: add AMD PCIe quirk for nvme shutdown opt   Keith Busch
• [PATCH v5 1/2] PCI: add AMD PCIe quirk for nvme shutdown opt   Deucher, Alexander
• [PATCH v5 1/2] PCI: add AMD PCIe quirk for nvme shutdown opt   Bjorn Helgaas
• [PATCH v5 1/2] PCI: add AMD PCIe quirk for nvme shutdown opt   Limonciello, Mario
• [PATCH v5 1/2] PCI: add AMD PCIe quirk for nvme shutdown opt   Liang, Prike
• [PATCH v5 2/2] nvme-pci: add AMD PCIe quirk for simple suspend/resume   Liang, Prike
• [PATCH v5 2/2] nvme-pci: add AMD PCIe quirk for simple suspend/resume   Prike Liang
• [PATCH V5] drivers/nvme: Add support for ACPI StorageD3Enable property   Raul E Rangel
• [PATCH V5] drivers/nvme: Add support for ACPI StorageD3Enable property   David E. Box
• [PATCHv6 1/1] nvme-tcp: Add option to set the physical interface to be used when connecting over TCP sockets.   Martin Belanger
• [PATCHv6 1/1] nvme-tcp: Add option to set the physical interface to be used when connecting over TCP sockets.   Sagi Grimberg
• [PATCHv6 1/1] nvme-tcp: Add option to set the physical interface to be used when connecting over TCP sockets.   Belanger, Martin
• [PATCHv6 1/1] nvme-tcp: Add option to set the physical interface to be used when connecting over TCP sockets.   Sagi Grimberg
• [PATCHv6 RESEND 1/1] nvme-tcp: Add option to set the physical interface to be used when connecting over TCP sockets.   Martin Belanger
• [PATCHv6 RESEND 1/1] nvme-tcp: Add option to set the physical interface to be used when connecting over TCP sockets.   Christoph Hellwig
• [regression] nvme flush failed from v5.13-rc1   Yi Zhang
• [regression] nvme flush failed from v5.13-rc1   Keith Busch
• [RESEND] LSF/MM/BPF: 2021: Call for Proposals   Josef Bacik
• [RFC PATCH] nvme-tcp: rerun io_work if req_list is not empty   Keith Busch
• [RFC PATCH] nvme-tcp: rerun io_work if req_list is not empty   Sagi Grimberg
• [RFC PATCH] nvme-tcp: rerun io_work if req_list is not empty   Keith Busch
• [RFC PATCH] nvme-tcp: rerun io_work if req_list is not empty   Sagi Grimberg
• [RFC PATCH] nvme-tcp: rerun io_work if req_list is not empty   Keith Busch
• [RFC PATCH] nvme-tcp: rerun io_work if req_list is not empty   Christoph Hellwig
• [RFC PATCH v4 00/27] NVMeTCP Offload ULP and QEDN Device Driver   Hannes Reinecke
• [RFC PATCH v4 00/27] NVMeTCP Offload ULP and QEDN Device Driver   Shai Malin
• [RFC PATCH v4 01/27] qed: Add NVMeTCP Offload PF Level FW and HW HSI   Hannes Reinecke
• [RFC PATCH v4 01/27] qed: Add NVMeTCP Offload PF Level FW and HW HSI   Shai Malin
• [RFC PATCH v4 02/27] qed: Add NVMeTCP Offload Connection Level FW and HW HSI   Hannes Reinecke
• [RFC PATCH v4 02/27] qed: Add NVMeTCP Offload Connection Level FW and HW HSI   Shai Malin
• [RFC PATCH v4 03/27] qed: Add qed-NVMeTCP personality   Hannes Reinecke
• [RFC PATCH v4 03/27] qed: Add qed-NVMeTCP personality   Shai Malin
• [RFC PATCH v4 04/27] qed: Add support of HW filter block   Hannes Reinecke
• [RFC PATCH v4 04/27] qed: Add support of HW filter block   Shai Malin
• [RFC PATCH v4 05/27] qed: Add NVMeTCP Offload IO Level FW and HW HSI   Hannes Reinecke
• [RFC PATCH v4 05/27] qed: Add NVMeTCP Offload IO Level FW and HW HSI   Shai Malin
• [RFC PATCH v4 06/27] qed: Add NVMeTCP Offload IO Level FW Initializations   Hannes Reinecke
• [RFC PATCH v4 06/27] qed: Add NVMeTCP Offload IO Level FW Initializations   Shai Malin
• [RFC PATCH v4 07/27] qed: Add IP services APIs support   Hannes Reinecke
• [RFC PATCH v4 07/27] qed: Add IP services APIs support   Shai Malin
• [RFC PATCH v4 08/27] nvme-tcp-offload: Add nvme-tcp-offload - NVMeTCP HW offload ULP   Hannes Reinecke
• [RFC PATCH v4 08/27] nvme-tcp-offload: Add nvme-tcp-offload - NVMeTCP HW offload ULP   Shai Malin
• [RFC PATCH v4 09/27] nvme-fabrics: Move NVMF_ALLOWED_OPTS and NVMF_REQUIRED_OPTS definitions   Hannes Reinecke
• [RFC PATCH v4 09/27] nvme-fabrics: Move NVMF_ALLOWED_OPTS and NVMF_REQUIRED_OPTS definitions   Shai Malin
• [RFC PATCH v4 10/27] nvme-tcp-offload: Add device scan implementation   Hannes Reinecke
• [RFC PATCH v4 10/27] nvme-tcp-offload: Add device scan implementation   Shai Malin
• [RFC PATCH v4 11/27] nvme-tcp-offload: Add controller level implementation   Hannes Reinecke
• [RFC PATCH v4 12/27] nvme-tcp-offload: Add controller level error recovery implementation   Hannes Reinecke
• [RFC PATCH v4 12/27] nvme-tcp-offload: Add controller level error recovery implementation   Shai Malin
• [RFC PATCH v4 13/27] nvme-tcp-offload: Add queue level implementation   Hannes Reinecke
• [RFC PATCH v4 13/27] nvme-tcp-offload: Add queue level implementation   Shai Malin
• [RFC PATCH v4 14/27] nvme-tcp-offload: Add IO level implementation   Hannes Reinecke
• [RFC PATCH v4 14/27] nvme-tcp-offload: Add IO level implementation   Shai Malin
• [RFC PATCH v4 15/27] nvme-tcp-offload: Add Timeout and ASYNC Support   Hannes Reinecke
• [RFC PATCH v4 15/27] nvme-tcp-offload: Add Timeout and ASYNC Support   Shai Malin
• [RFC PATCH v4 16/27] qedn: Add qedn - Marvell's NVMeTCP HW offload vendor driver   Hannes Reinecke
• [RFC PATCH v4 16/27] qedn: Add qedn - Marvell's NVMeTCP HW offload vendor driver   Shai Malin
• [RFC PATCH v4 17/27] qedn: Add qedn probe   Hannes Reinecke
• [RFC PATCH v4 17/27] qedn: Add qedn probe   Shai Malin
• [RFC PATCH v4 18/27] qedn: Add qedn_claim_dev API support   Hannes Reinecke
• [RFC PATCH v4 18/27] qedn: Add qedn_claim_dev API support   Shai Malin
• [RFC PATCH v4 19/27] qedn: Add IRQ and fast-path resources initializations   Hannes Reinecke
• [RFC PATCH v4 19/27] qedn: Add IRQ and fast-path resources initializations   Shai Malin
• [RFC PATCH v4 20/27] qedn: Add connection-level slowpath functionality   Hannes Reinecke
• [RFC PATCH v4 20/27] qedn: Add connection-level slowpath functionality   Shai Malin
• [RFC PATCH v4 21/27] qedn: Add support of configuring HW filter block   Hannes Reinecke
• [RFC PATCH v4 21/27] qedn: Add support of configuring HW filter block   Shai Malin
• [RFC PATCH v4 22/27] qedn: Add IO level nvme_req and fw_cq workqueues   Hannes Reinecke
• [RFC PATCH v4 22/27] qedn: Add IO level nvme_req and fw_cq workqueues   Shai Malin
• [RFC PATCH v4 23/27] qedn: Add support of Task and SGL   Hannes Reinecke
• [RFC PATCH v4 23/27] qedn: Add support of Task and SGL   Shai Malin
• [RFC PATCH v4 24/27] qedn: Add support of NVME ICReq & ICResp   Hannes Reinecke
• [RFC PATCH v4 24/27] qedn: Add support of NVME ICReq & ICResp   Shai Malin
• [RFC PATCH v4 25/27] qedn: Add IO level fastpath functionality   Hannes Reinecke
• [RFC PATCH v4 25/27] qedn: Add IO level fastpath functionality   Shai Malin
• [RFC PATCH v4 26/27] qedn: Add Connection and IO level recovery flows   Hannes Reinecke
• [RFC PATCH v4 26/27] qedn: Add Connection and IO level recovery flows   Shai Malin
• [RFC PATCH v4 27/27] qedn: Add support of ASYNC   Hannes Reinecke
• [RFC PATCH v4 27/27] qedn: Add support of ASYNC   Shai Malin
• [RFC PATCH v5 00/27] NVMeTCP Offload ULP and QEDN Device Driver   Shai Malin
• [RFC PATCH v5 01/27] nvme-tcp-offload: Add nvme-tcp-offload - NVMeTCP HW offload ULP   Shai Malin
• [RFC PATCH v5 01/27] nvme-tcp-offload: Add nvme-tcp-offload - NVMeTCP HW offload ULP   Himanshu Madhani
• [RFC PATCH v5 01/27] nvme-tcp-offload: Add nvme-tcp-offload - NVMeTCP HW offload ULP   Sagi Grimberg
• [RFC PATCH v5 01/27] nvme-tcp-offload: Add nvme-tcp-offload - NVMeTCP HW offload ULP   Shai Malin
• [RFC PATCH v5 01/27] nvme-tcp-offload: Add nvme-tcp-offload - NVMeTCP HW offload ULP   Shai Malin
• [RFC PATCH v5 02/27] nvme-fabrics: Move NVMF_ALLOWED_OPTS and NVMF_REQUIRED_OPTS definitions   Shai Malin
• [RFC PATCH v5 02/27] nvme-fabrics: Move NVMF_ALLOWED_OPTS and NVMF_REQUIRED_OPTS definitions   Himanshu Madhani
• [RFC PATCH v5 02/27] nvme-fabrics: Move NVMF_ALLOWED_OPTS and NVMF_REQUIRED_OPTS definitions   Sagi Grimberg
• [RFC PATCH v5 03/27] nvme-tcp-offload: Add device scan implementation   Shai Malin
• [RFC PATCH v5 03/27] nvme-tcp-offload: Add device scan implementation   Himanshu Madhani
• [RFC PATCH v5 03/27] nvme-tcp-offload: Add device scan implementation   Sagi Grimberg
• [RFC PATCH v5 03/27] nvme-tcp-offload: Add device scan implementation   Shai Malin
• [RFC PATCH v5 04/27] nvme-tcp-offload: Add controller level implementation   Shai Malin
• [RFC PATCH v5 04/27] nvme-tcp-offload: Add controller level implementation   Himanshu Madhani
• [RFC PATCH v5 04/27] nvme-tcp-offload: Add controller level implementation   Sagi Grimberg
• [RFC PATCH v5 04/27] nvme-tcp-offload: Add controller level implementation   Shai Malin
• [RFC PATCH v5 05/27] nvme-tcp-offload: Add controller level error recovery implementation   Shai Malin
• [RFC PATCH v5 05/27] nvme-tcp-offload: Add controller level error recovery implementation   Himanshu Madhani
• [RFC PATCH v5 05/27] nvme-tcp-offload: Add controller level error recovery implementation   Sagi Grimberg
• [RFC PATCH v5 06/27] nvme-tcp-offload: Add queue level implementation   Shai Malin
• [RFC PATCH v5 06/27] nvme-tcp-offload: Add queue level implementation   Himanshu Madhani
• [RFC PATCH v5 06/27] nvme-tcp-offload: Add queue level implementation   Sagi Grimberg
• [RFC PATCH v5 06/27] nvme-tcp-offload: Add queue level implementation   Shai Malin
• [RFC PATCH v5 07/27] nvme-tcp-offload: Add IO level implementation   Shai Malin
• [RFC PATCH v5 07/27] nvme-tcp-offload: Add IO level implementation   Himanshu Madhani
• [RFC PATCH v5 08/27] nvme-tcp-offload: Add Timeout and ASYNC Support   Shai Malin
• [RFC PATCH v5 08/27] nvme-tcp-offload: Add Timeout and ASYNC Support   Himanshu Madhani
• [RFC PATCH v5 08/27] nvme-tcp-offload: Add Timeout and ASYNC Support   Sagi Grimberg
• [RFC PATCH v5 08/27] nvme-tcp-offload: Add Timeout and ASYNC Support   Shai Malin
• [RFC PATCH v5 09/27] qed: Add TCP_ULP FW resource layout   Shai Malin
• [RFC PATCH v5 10/27] qed: Add NVMeTCP Offload PF Level FW and HW HSI   Shai Malin
• [RFC PATCH v5 11/27] qed: Add NVMeTCP Offload Connection Level FW and HW HSI   Shai Malin
• [RFC PATCH v5 12/27] qed: Add support of HW filter block   Shai Malin
• [RFC PATCH v5 13/27] qed: Add NVMeTCP Offload IO Level FW and HW HSI   Shai Malin
• [RFC PATCH v5 14/27] qed: Add NVMeTCP Offload IO Level FW Initializations   Shai Malin
• [RFC PATCH v5 15/27] qed: Add IP services APIs support   Shai Malin
• [RFC PATCH v5 16/27] qedn: Add qedn - Marvell's NVMeTCP HW offload vendor driver   Shai Malin
• [RFC PATCH v5 17/27] qedn: Add qedn probe   Shai Malin
• [RFC PATCH v5 17/27] qedn: Add qedn probe   Leon Romanovsky
• [RFC PATCH v5 17/27] qedn: Add qedn probe   Shai Malin
• [RFC PATCH v5 17/27] qedn: Add qedn probe   Leon Romanovsky
• [RFC PATCH v5 18/27] qedn: Add qedn_claim_dev API support   Shai Malin
• [RFC PATCH v5 19/27] qedn: Add IRQ and fast-path resources initializations   Shai Malin
• [RFC PATCH v5 20/27] qedn: Add connection-level slowpath functionality   Shai Malin
• [RFC PATCH v5 21/27] qedn: Add support of configuring HW filter block   Shai Malin
• [RFC PATCH v5 22/27] qedn: Add IO level qedn_send_req and fw_cq workqueue   Shai Malin
• [RFC PATCH v5 23/27] qedn: Add support of Task and SGL   Shai Malin
• [RFC PATCH v5 24/27] qedn: Add support of NVME ICReq & ICResp   Shai Malin
• [RFC PATCH v5 25/27] qedn: Add IO level fastpath functionality   Shai Malin
• [RFC PATCH v5 26/27] qedn: Add Connection and IO level recovery flows   Shai Malin
• [RFC PATCH v5 27/27] qedn: Add support of ASYNC   Shai Malin
• [RFC PATCH v6 00/27] NVMeTCP Offload ULP and QEDN Device Driver   Shai Malin
• [RFC PATCH v6 01/27] nvme-tcp-offload: Add nvme-tcp-offload - NVMeTCP HW offload ULP   Shai Malin
• [RFC PATCH v6 02/27] nvme-fabrics: Move NVMF_ALLOWED_OPTS and NVMF_REQUIRED_OPTS definitions   Shai Malin
• [RFC PATCH v6 02/27] nvme-fabrics: Move NVMF_ALLOWED_OPTS and NVMF_REQUIRED_OPTS definitions   Hannes Reinecke
• [RFC PATCH v6 03/27] nvme-fabrics: Expose nvmf_check_required_opts() globally   Shai Malin
• [RFC PATCH v6 03/27] nvme-fabrics: Expose nvmf_check_required_opts() globally   Hannes Reinecke
• [RFC PATCH v6 04/27] nvme-tcp-offload: Add device scan implementation   Shai Malin
• [RFC PATCH v6 04/27] nvme-tcp-offload: Add device scan implementation   Hannes Reinecke
• [RFC PATCH v6 05/27] nvme-tcp-offload: Add controller level implementation   Shai Malin
• [RFC PATCH v6 05/27] nvme-tcp-offload: Add controller level implementation   Hannes Reinecke
• [RFC PATCH v6 05/27] nvme-tcp-offload: Add controller level implementation   Shai Malin
• [RFC PATCH v6 06/27] nvme-tcp-offload: Add controller level error recovery implementation   Shai Malin
• [RFC PATCH v6 07/27] nvme-tcp-offload: Add queue level implementation   Shai Malin
• [RFC PATCH v6 07/27] nvme-tcp-offload: Add queue level implementation   Hannes Reinecke
• [RFC PATCH v6 07/27] nvme-tcp-offload: Add queue level implementation   Shai Malin
• [RFC PATCH v6 08/27] nvme-tcp-offload: Add IO level implementation   Shai Malin
• [RFC PATCH v6 09/27] qed: Add TCP_ULP FW resource layout   Shai Malin
• [RFC PATCH v6 09/27] qed: Add TCP_ULP FW resource layout   Hannes Reinecke
• [RFC PATCH v6 10/27] qed: Add NVMeTCP Offload PF Level FW and HW HSI   Shai Malin
• [RFC PATCH v6 10/27] qed: Add NVMeTCP Offload PF Level FW and HW HSI   Hannes Reinecke
• [RFC PATCH v6 11/27] qed: Add NVMeTCP Offload Connection Level FW and HW HSI   Shai Malin
• [RFC PATCH v6 11/27] qed: Add NVMeTCP Offload Connection Level FW and HW HSI   Hannes Reinecke
• [RFC PATCH v6 12/27] qed: Add support of HW filter block   Shai Malin
• [RFC PATCH v6 13/27] qed: Add NVMeTCP Offload IO Level FW and HW HSI   Shai Malin
• [RFC PATCH v6 13/27] qed: Add NVMeTCP Offload IO Level FW and HW HSI   Hannes Reinecke
• [RFC PATCH v6 14/27] qed: Add NVMeTCP Offload IO Level FW Initializations   Shai Malin
• [RFC PATCH v6 14/27] qed: Add NVMeTCP Offload IO Level FW Initializations   Hannes Reinecke
• [RFC PATCH v6 15/27] qed: Add IP services APIs support   Shai Malin
• [RFC PATCH v6 16/27] qedn: Add qedn - Marvell's NVMeTCP HW offload vendor driver   Shai Malin
• [RFC PATCH v6 17/27] qedn: Add qedn probe   Shai Malin
• [RFC PATCH v6 18/27] qedn: Add qedn_claim_dev API support   Shai Malin
• [RFC PATCH v6 19/27] qedn: Add IRQ and fast-path resources initializations   Shai Malin
• [RFC PATCH v6 19/27] qedn: Add IRQ and fast-path resources initializations   Hannes Reinecke
• [RFC PATCH v6 20/27] qedn: Add connection-level slowpath functionality   Shai Malin
• [RFC PATCH v6 21/27] qedn: Add support of configuring HW filter block   Shai Malin
• [RFC PATCH v6 22/27] qedn: Add IO level qedn_send_req and fw_cq workqueue   Shai Malin
• [RFC PATCH v6 22/27] qedn: Add IO level qedn_send_req and fw_cq workqueue   Hannes Reinecke
• [RFC PATCH v6 22/27] qedn: Add IO level qedn_send_req and fw_cq workqueue   Shai Malin
• [RFC PATCH v6 23/27] qedn: Add support of Task and SGL   Shai Malin
• [RFC PATCH v6 23/27] qedn: Add support of Task and SGL   Hannes Reinecke
• [RFC PATCH v6 23/27] qedn: Add support of Task and SGL   Shai Malin
• [RFC PATCH v6 24/27] qedn: Add support of NVME ICReq & ICResp   Shai Malin
• [RFC PATCH v6 24/27] qedn: Add support of NVME ICReq & ICResp   Hannes Reinecke
• [RFC PATCH v6 25/27] qedn: Add IO level fastpath functionality   Shai Malin
• [RFC PATCH v6 26/27] qedn: Add Connection and IO level recovery flows   Shai Malin
• [RFC PATCH v6 27/27] qedn: Add support of ASYNC   Shai Malin
• [RFC PATCH v7 00/27] NVMeTCP Offload ULP and QEDN Device Driver   Shai Malin
• [RFC PATCH v7 01/27] nvme-tcp-offload: Add nvme-tcp-offload - NVMeTCP HW offload ULP   Shai Malin
• [RFC PATCH v7 02/27] nvme-fabrics: Move NVMF_ALLOWED_OPTS and NVMF_REQUIRED_OPTS definitions   Shai Malin
• [RFC PATCH v7 03/27] nvme-fabrics: Expose nvmf_check_required_opts() globally   Shai Malin
• [RFC PATCH v7 04/27] nvme-tcp-offload: Add device scan implementation   Shai Malin
• [RFC PATCH v7 05/27] nvme-tcp-offload: Add controller level implementation   Shai Malin
• [RFC PATCH v7 06/27] nvme-tcp-offload: Add controller level error recovery implementation   Shai Malin
• [RFC PATCH v7 07/27] nvme-tcp-offload: Add queue level implementation   Shai Malin
• [RFC PATCH v7 08/27] nvme-tcp-offload: Add IO level implementation   Shai Malin
• [RFC PATCH v7 09/27] qed: Add TCP_ULP FW resource layout   Shai Malin
• [RFC PATCH v7 10/27] qed: Add NVMeTCP Offload PF Level FW and HW HSI   Shai Malin
• [RFC PATCH v7 11/27] qed: Add NVMeTCP Offload Connection Level FW and HW HSI   Shai Malin
• [RFC PATCH v7 12/27] qed: Add support of HW filter block   Shai Malin
• [RFC PATCH v7 13/27] qed: Add NVMeTCP Offload IO Level FW and HW HSI   Shai Malin
• [RFC PATCH v7 14/27] qed: Add NVMeTCP Offload IO Level FW Initializations   Shai Malin
• [RFC PATCH v7 15/27] qed: Add IP services APIs support   Shai Malin
• [RFC PATCH v7 16/27] qedn: Add qedn - Marvell's NVMeTCP HW offload vendor driver   Shai Malin
• [RFC PATCH v7 17/27] qedn: Add qedn probe   Shai Malin
• [RFC PATCH v7 18/27] qedn: Add qedn_claim_dev API support   Shai Malin
• [RFC PATCH v7 19/27] qedn: Add IRQ and fast-path resources initializations   Shai Malin
• [RFC PATCH v7 20/27] qedn: Add connection-level slowpath functionality   Shai Malin
• [RFC PATCH v7 21/27] qedn: Add support of configuring HW filter block   Shai Malin
• [RFC PATCH v7 22/27] qedn: Add IO level qedn_send_req and fw_cq workqueue   Shai Malin
• [RFC PATCH v7 23/27] qedn: Add support of Task and SGL   Shai Malin
• [RFC PATCH v7 24/27] qedn: Add support of NVME ICReq & ICResp   Shai Malin
• [RFC PATCH v7 25/27] qedn: Add IO level fastpath functionality   Shai Malin
• [RFC PATCH v7 26/27] qedn: Add Connection and IO level recovery flows   Shai Malin
• [RFC PATCH v7 27/27] qedn: Add support of ASYNC   Shai Malin
• A possible divide by zero bug in alloc_nodes_vectors   Yiyuan guo
• A possible divide by zero bug in alloc_nodes_vectors   Thomas Gleixner
• BUG: scheduling while atomic when nvmet_rdma_queue_response fails in posting a request   Michal Kalderon
• misc nvme ioctl cleanups   Christoph Hellwig
• misc nvme ioctl cleanups   Keith Busch
• misc nvme ioctl cleanups   Sagi Grimberg
• NVME_IOCTL_SUBMIT_IO access control   Niklas Cassel
• nvmeof Issues with Zen 3/Ryzen 5000 Initiator   Jonathan Wright
• nvmeof Issues with Zen 3/Ryzen 5000 Initiator   Chaitanya Kulkarni
• nvmeof Issues with Zen 3/Ryzen 5000 Initiator   Jonathan Wright
• nvmeof Issues with Zen 3/Ryzen 5000 Initiator   Chaitanya Kulkarni
• nvmeof Issues with Zen 3/Ryzen 5000 Initiator   Keith Busch
• nvmeof Issues with Zen 3/Ryzen 5000 Initiator   Jonathan Wright
• nvmeof Issues with Zen 3/Ryzen 5000 Initiator   Sagi Grimberg
• nvme tcp receive errors   Sagi Grimberg
• nvme tcp receive errors   Keith Busch
• nvme tcp receive errors   Keith Busch
• nvme tcp receive errors   Sagi Grimberg
• nvme tcp receive errors   Sagi Grimberg
• nvme tcp receive errors   Keith Busch
• nvme tcp receive errors   Sagi Grimberg
• nvme tcp receive errors   Sagi Grimberg
• nvme tcp receive errors   Keith Busch
• nvme tcp receive errors   Keith Busch
• nvme tcp receive errors   Sagi Grimberg
• nvme tcp receive errors   Keith Busch
• nvme tcp receive errors   Sagi Grimberg
• nvme tcp receive errors   Keith Busch
• nvme tcp receive errors   Sagi Grimberg
• nvme tcp receive errors   Keith Busch
• nvme tcp receive errors   Sagi Grimberg
• nvme tcp receive errors   Keith Busch
• nvme tcp receive errors   Sagi Grimberg
• nvme tcp receive errors   Keith Busch
• nvme tcp receive errors   Sagi Grimberg
• nvme tcp receive errors   Keith Busch
• regression: data corruption with ext4 on LUKS on nvme with torvalds master   Alex Xu (Hello71)
• regression: data corruption with ext4 on LUKS on nvme with torvalds master   Jens Axboe
• regression: data corruption with ext4 on LUKS on nvme with torvalds master   Alex Xu (Hello71)
• regression: data corruption with ext4 on LUKS on nvme with torvalds master   Changheun Lee
• regression: data corruption with ext4 on LUKS on nvme with torvalds master   Theodore Ts'o
• regression: data corruption with ext4 on LUKS on nvme with torvalds master   Bart Van Assche
• regression: data corruption with ext4 on LUKS on nvme with torvalds master   Mikulas Patocka
• regression: data corruption with ext4 on LUKS on nvme with torvalds master   Bart Van Assche
• regression: data corruption with ext4 on LUKS on nvme with torvalds master   Mikulas Patocka
• regression: data corruption with ext4 on LUKS on nvme with torvalds master   Mikulas Patocka
• regression: data corruption with ext4 on LUKS on nvme with torvalds master   Changheun Lee
• simplify gendisk and request_queue allocation for bio based drivers   Ulf Hansson
• simplify gendisk and request_queue allocation for bio based drivers   Christoph Hellwig
• simplify gendisk and request_queue allocation for bio based drivers   Ulf Hansson
• switch block layer polling to a bio based model v3   Christoph Hellwig
• switch block layer polling to a bio based model v3   Wunderlich, Mark

Last message date: Mon May 31 22:22:33 PDT 2021
Archived on: Tue Oct 12 22:54:05 PDT 2021

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...