December 2016 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Thu Dec 1 01:44:14 PST 2016
Ending: Fri Dec 30 21:47:35 PST 2016
Messages: 243

• [PATCH v1 0/2] nvmetcli manpage and misc tweaks.   Christoph Hellwig
• [PATCH] fs: configfs: don't return anything from drop_link   Christoph Hellwig
• [PATCH V2 1/5] block: add async variant of blkdev_issue_zeroout   Christoph Hellwig
• [PATCH V2 2/5] block: add support for REQ_OP_WRITE_ZEROES   Christoph Hellwig
• [PATCH V2 3/5] nvme.h: add Write Zeroes definitions   Christoph Hellwig
• [PATCH V2 4/5] nvme: add support for the Write Zeroes command   Christoph Hellwig
• [PATCH V2 5/5] nvmet: add support for the Write Zeroes command   Christoph Hellwig
• [PATCH v2 2/4] block: Add Sed-opal library   Christoph Hellwig
• LSF/MM 2017: Call for Proposals   Jeff Layton
• [PATCH V2 1/5] block: add async variant of blkdev_issue_zeroout   Jens Axboe
• [PATCH v2 2/4] block: Add Sed-opal library   Scott Bauer
• [PATCH] nvme/pci: Log PCI_STATUS when the controller dies   Keith Busch
• [PATCH v2 2/4] block: Add Sed-opal library   Keith Busch
• [PATCH v2] nvme/pci: Log PCI_STATUS when the controller dies   Andy Lutomirski
• [PATCH v6 0/7] nvme-fabrics: Add FC-NVME Transport support   James Smart
• [PATCH v6 1/7] Add type 0x28 NVME type code to scsi fc headers   James Smart
• [PATCH v6 2/7] nvme-fabrics: Add FC transport error codes to nvme.h   James Smart
• [PATCH v6 3/7] nvme-fabrics: Add FC transport FC-NVME definitions   James Smart
• [PATCH v6 4/7] nvme-fabrics: Add FC transport LLDD api definitions   James Smart
• [PATCH v6 5/7] nvme-fabrics: Add host support for FC transport   James Smart
• [PATCH v6 6/7] nvme-fabrics: Add target support for FC transport   James Smart
• [PATCH v6 7/7] nvme-fabrics: Add FC LLDD loopback driver to test FC-NVME   James Smart
• [PATCH v6 1/7] Add type 0x28 NVME type code to scsi fc headers   Johannes Thumshirn
• [PATCH v6 5/7] nvme-fabrics: Add host support for FC transport   Johannes Thumshirn
• [PATCH v6 6/7] nvme-fabrics: Add target support for FC transport   Johannes Thumshirn
• [PATCH v6 7/7] nvme-fabrics: Add FC LLDD loopback driver to test FC-NVME   Johannes Thumshirn
• [PATCH] block: improve handling of the magic discard payload   Christoph Hellwig
• [PATCH v2] nvme/pci: Log PCI_STATUS when the controller dies   Christoph Hellwig
• Linux-nvme Digest, Vol 56, Issue 64   Christoph Hellwig
• [PATCH v3 0/2] align to generic ib_event logging helper   Christoph Hellwig
• [PATCH v6 5/7] nvme-fabrics: Add host support for FC transport   Christoph Hellwig
• [PATCH v6 5/7] nvme-fabrics: Add host support for FC transport   Johannes Thumshirn
• [PATCH v6 5/7] nvme-fabrics: Add host support for FC transport   James Smart
• [PATCH v2] nvme/pci: Log PCI_STATUS when the controller dies   Andy Lutomirski
• [PATCH v3] nvme/pci: Log PCI_STATUS when the controller dies   Andy Lutomirski
• detect and warn about ahci-remapped NVMe devices   Christoph Hellwig
• [PATCH 1/3] nvme: move NVMe class code to pci_ids.h   Christoph Hellwig
• [PATCH 2/3] ahci-remap.h: add ahci remapping definitions   Christoph Hellwig
• [PATCH 3/3] ahci: warn about remapped NVMe devices   Christoph Hellwig
• Storage Work Group Storage Interface Interactions Specification - updates   Efrem Mc
• [PATCH v2] nvme/pci: Log PCI_STATUS when the controller dies   J Freyensee
• [PATCH v3] nvme/pci: Log PCI_STATUS when the controller dies   Andy Lutomirski
• [PATCH v3] nvme/pci: Log PCI_STATUS when the controller dies   Keith Busch
• [PATCH v3] nvme/pci: Log PCI_STATUS when the controller dies   Jens Axboe
• [PATCH 2/3] ahci-remap.h: add ahci remapping definitions   Sergei Shtylyov
• [GIT PULL] nvme fabrics patches for 4.10   Sagi Grimberg
• [PATCH 0/3] some useful fabrics patches   Sagi Grimberg
• [PATCH 1/3] nvmet: delete controllers deletion upon subsystem release   Sagi Grimberg
• [PATCH 2/3] nvmet: Make cntlid globally unique   Sagi Grimberg
• [PATCH 3/3] nvme: Make controller state visible via sysfs   Sagi Grimberg
• [PATCH 3/3] nvme: Make controller state visible via sysfs   Johannes Thumshirn
• [PATCH 2/3] nvmet: Make cntlid globally unique   Johannes Thumshirn
• [PATCH 1/3] nvmet: delete controllers deletion upon subsystem release   Johannes Thumshirn
• [PATCH 1/3] nvmet: delete controllers deletion upon subsystem release   Max Gurtovoy
• [PATCH 2/3] nvmet: Make cntlid globally unique   Max Gurtovoy
• [PATCH 3/3] nvme: Make controller state visible via sysfs   Max Gurtovoy
• [PATCH 2/3] ahci-remap.h: add ahci remapping definitions   Christoph Hellwig
• [PATCH 2/3] nvmet: Make cntlid globally unique   Christoph Hellwig
• [PATCH 3/3] nvme: Make controller state visible via sysfs   Christoph Hellwig
• [PATCH 1/3] nvmet: delete controllers deletion upon subsystem release   Christoph Hellwig
• [PATCH 3/3] nvme: Make controller state visible via sysfs   Sagi Grimberg
• [PATCH 3/3] nvme: Make controller state visible via sysfs   Sagi Grimberg
• [PATCH 2/3] nvmet: Make cntlid globally unique   Sagi Grimberg
• [PATCH 1/3] nvmet: delete controllers deletion upon subsystem release   Sagi Grimberg
• [GIT PULL] nvme fabrics patches for 4.10   Jens Axboe
• detect and warn about ahci-remapped NVMe devices   Tejun Heo
• [PATCH 1/3] nvmet: delete controllers deletion upon subsystem release   Christoph Hellwig
• [PATCH 2/3] nvmet: Make cntlid globally unique   Christoph Hellwig
• [GIT PULL] nvme fabrics patches for 4.10   Sagi Grimberg
• [GIT PULL] nvme fabrics patches for 4.10   Jens Axboe
• [PATCH] nvme/scsi: Remove START STOP emulation   Andy Lutomirski
• [PATCH 2/3] nvmet: Make cntlid globally unique   J Freyensee
• LSF/MM 2017: Call for Proposals   James Bottomley
• [PATCH] nvme: support bi-directional commands   Christoph Hellwig
• [PATCH] nvme: support bi-directional commands   Keith Busch
• [PATCH] nvme/scsi: Remove START STOP emulation   Keith Busch
• [PATCH] nvme: support bi-directional commands   Christoph Hellwig
• [PATCH] nvme: support bi-directional commands   Keith Busch
• [PATCH] nvme: support bi-directional commands   Christoph Hellwig
• [PATCH] nvme: support bi-directional commands   Keith Busch
• [PATCH] nvme: support bi-directional commands   Keith Busch
• [PATCH] nvmet: fix KATO offset in Set Features   Daniel Verkamp
• [PATCH] nvmet: fix KATO offset in Set Features   Daniel Verkamp
• [PATCH] nvme: create the correct number of queues   Dan Streetman
• [PATCH] nvme: use the correct msix vector for each queue   Dan Streetman
• [PATCH] nvme: create the correct number of queues   Keith Busch
• [PATCH] nvme: use the correct msix vector for each queue   Dan Streetman
• [PATCH] nvme: use the correct msix vector for each queue   Keith Busch
• [PATCH] nvme: use the correct msix vector for each queue   Christoph Hellwig
• [PATCH] nvme: use the correct msix vector for each queue   Dan Streetman
• [PATCH] nvme: use the correct msix vector for each queue   Dan Streetman
• [PATCH] nvme: use the correct msix vector for each queue   Keith Busch
• [PATCH] nvme: use the correct msix vector for each queue   Keith Busch
• [bug report] nvme-fabrics: Add host support for FC transport   Dan Carpenter
• LSF/MM 2017: Call for Proposals   Michal Hocko
• [Lsf-pc] LSF/MM 2017: Call for Proposals   Jan Kara
• LSF/MM 2017: Call for Proposals   James Bottomley
• LSF/MM 2017: Call for Proposals   Michal Hocko
• [LSF/MM TOPIC ATTEND] multipath for NVMe over Fabrics   Mike Snitzer
• [LSF/MM TOPIC ATTEND] multipath for NVMe over Fabrics   Hannes Reinecke
• [PATCH] nvme-fabrics: remove some logically dead code performing redundant ret checks   Colin King
• [PATCH] nvme/pci: Delete misleading queue-wrap comment   Keith Busch
• [PATCH v2 2/4] block: Add Sed-opal library   Scott Bauer
• [PATCH] nvmet: fix KATO offset in Set Features   Christoph Hellwig
• [PATCH v2 2/4] block: Add Sed-opal library   Christoph Hellwig
• [PATCH] nvme/pci: Delete misleading queue-wrap comment   Christoph Hellwig
• [PATCH] nvme/scsi: Remove START STOP emulation   Christoph Hellwig
• [PATCH v2 2/4] block: Add Sed-opal library   Scott Bauer
• [PATCH v2] nvmet: fix KATO offset in Set Features   Daniel Verkamp
• [PATCH] nvmet: fix KATO offset in Set Features   Daniel Verkamp
• [patch] nvme-fabrics: correct some printk information   Dan Carpenter
• [patch] nvme-fabrics: correct some printk information   Joe Perches
• [patch] nvme-fabrics: correct some printk information   Dan Carpenter
• [patch] nvme-fabrics: correct some printk information   Julia Lawall
• [patch] nvme-fabrics: correct some printk information   Dan Carpenter
• [patch] nvme-fabrics: correct some printk information   Joe Perches
• [patch] nvme-fabrics: correct some printk information   Dan Carpenter
• [patch] nvme-fabrics: correct some printk information   Julia Lawall
• [patch] nvme-fabrics: correct some printk information   Joe Perches
• [patch] nvme-fabrics: correct some printk information   Joe Perches
• [patch] nvme-fabrics: correct some printk information   Joe Perches
• [patch] nvme-fabrics: correct some printk information   Dan Carpenter
• [patch] nvme-fabrics: correct some printk information   Julia Lawall
• [patch] nvme-fabrics: correct some printk information   Joe Perches
• [LSF/MM TOPIC][LSF/MM ATTEND] Enabling Peer-to-Peer DMAs between PCIe devices   Stephen Bates
• extend bi_size to unsigned long ?   Coly Li
• extend bi_size to unsigned long ?   Coly Li
• extend bi_size to unsigned long ?   Ming Lei
• [PATCH v5 0/8] connect reject event helpers   Doug Ledford
• [PATCH] nvme: simplify stripe quirk   Keith Busch
• [PATCH] nvme: simplify stripe quirk   Christoph Hellwig
• [PATCH] nvme-fabrics: simplify error handling of nvme_fc_create_hw_io_queues   Johannes Thumshirn
• [PATCH] nvme: simplify stripe quirk   Keith Busch
• [PATCH] nvme-fabrics: simplify error handling of nvme_fc_create_hw_io_queues   James Smart
• Enabling RoCEv2 and connecting to IPv6 targets   Narayan Ayalasomayajula
• [PATCH] nvme-cli: fabrics: remove libudev dependency   Keith Busch
• [PATCH] nvme-cli: fabrics: remove libudev dependency   Christoph Hellwig
• [PATCH] nvme: simplify stripe quirk   Christoph Hellwig
• [PATCH] nvme-cli: fabrics: remove libudev dependency   Keith Busch
• [PATCH] nvme: simplify stripe quirk   Keith Busch
• Support for Nvme 1.2.1   Nisha Miller
• Support for Nvme 1.2.1   Keith Busch
• Support for Nvme 1.2.1   Nisha Miller
• [PATCH 2/2] nvme: improve cmb sysfs reporting   Stephen Bates
• [PATCH 0/2] nvme: Improvements in sysfs entry for NVMe CMBs   Jens Axboe
• [PATCH 0/2] nvme: Improvements in sysfs entry for NVMe CMBs   Stephen Bates
• [PATCH] nvme: simplify stripe quirk   Christoph Hellwig
• [PATCH] nvme-cli: fabrics: remove libudev dependency   Christoph Hellwig
• [RFC 0/1] New PCI Switch Management Driver   Logan Gunthorpe
• [RFC 1/1] MicroSemi Switchtec management interface driver   Logan Gunthorpe
• [RFC 1/1] MicroSemi Switchtec management interface driver   Greg Kroah-Hartman
• [RFC 1/1] MicroSemi Switchtec management interface driver   Logan Gunthorpe
• [RFC 1/1] MicroSemi Switchtec management interface driver   Greg Kroah-Hartman
• [PATCH] nvme: use __iowrite64_copy for SQs in the CMB   Saar Gross
• [PATCH 1/1] nvme: Fix whitespace problem   Max Gurtovoy
• [PATCH 1/2] nvme : Use correct scnprintf in cmb show   Jon Derrick
• [PATCH 0/2] nvme: Improvements in sysfs entry for NVMe CMBs   Jens Axboe
• [PATCH 2/2] nvme: improve cmb sysfs reporting   Jon Derrick
• [RFC 0/1] New PCI Switch Management Driver   Myron Stowe
• [PATCHv2] nvme: simplify stripe quirk   Keith Busch
• [RFC 1/1] MicroSemi Switchtec management interface driver   Keith Busch
• [RFC 0/1] New PCI Switch Management Driver   Logan Gunthorpe
• [RFC 1/1] MicroSemi Switchtec management interface driver   Logan Gunthorpe
• [RFC 0/1] New PCI Switch Management Driver   Logan Gunthorpe
• [RFC 0/1] New PCI Switch Management Driver   Keith Busch
• [PATCH v3 0/5] SED OPAL Library   Scott Bauer
• [PATCH v3 1/5] include: Add definitions for sed   Scott Bauer
• [PATCH v3 2/5] lib: Add Sed-opal library   Scott Bauer
• [PATCH v3 3/5] fs: Wire up SED/Opal to ioctl   Scott Bauer
• [PATCH v3 4/5] nvme: Implement resume_from_suspend and SED Allocation code.   Scott Bauer
• [PATCH v3 5/5] Maintainers: Add Information for SED Opal library   Scott Bauer
• [PATCH v3 2/5] lib: Add Sed-opal library   Keith Busch
• [PATCH v3 4/5] nvme: Implement resume_from_suspend and SED Allocation code.   Keith Busch
• [PATCH v3 4/5] nvme: Implement resume_from_suspend and SED Allocation code.   Scott Bauer
• [patch] nvme-fabrics: correct some printk information   James Smart
• [PATCH] nvme-fabrics: remove some logically dead code performing redundant ret checks   James Smart
• [PATCH v3 2/5] lib: Add Sed-opal library   kbuild test robot
• [PATCH v3 2/5] lib: Add Sed-opal library   kbuild test robot
• [PATCH v3 4/5] nvme: Implement resume_from_suspend and SED Allocation code.   kbuild test robot
• [PATCH v3 2/5] lib: Add Sed-opal library   Christoph Hellwig
• [PATCH v3 4/5] nvme: Implement resume_from_suspend and SED Allocation code.   Christoph Hellwig
• [PATCH v3 4/5] nvme: Implement resume_from_suspend and SED Allocation code.   Christoph Hellwig
• [PATCH v3 3/5] fs: Wire up SED/Opal to ioctl   Christoph Hellwig
• [PATCH v3 1/5] include: Add definitions for sed   Christoph Hellwig
• [PATCH v3 4/5] nvme: Implement resume_from_suspend and SED Allocation code.   Christoph Hellwig
• [PATCH v3 2/5] lib: Add Sed-opal library   Al Viro
• [PATCH v3 2/5] lib: Add Sed-opal library   Christoph Hellwig
• [patch] nvme-fabrics: correct some printk information   Dan Carpenter
• [PATCH v3 4/5] nvme: Implement resume_from_suspend and SED Allocation code.   Christoph Hellwig
• [PATCH v3 4/5] nvme: Implement resume_from_suspend and SED Allocation code.   Keith Busch
• [PATCH v3 4/5] nvme: Implement resume_from_suspend and SED Allocation code.   Scott Bauer
• [PATCH v3 4/5] nvme: Implement resume_from_suspend and SED Allocation code.   Scott Bauer
• [PATCH] nvme_fc: correct some printk information   James Smart
• [PATCH v3 2/5] lib: Add Sed-opal library   Scott Bauer
• [PATCH v3 2/5] lib: Add Sed-opal library   Jon Derrick
• [PATCH v3 4/5] nvme: Implement resume_from_suspend and SED Allocation code.   Christoph Hellwig
• [PATCH v3 4/5] nvme: Implement resume_from_suspend and SED Allocation code.   Christoph Hellwig
• [PATCH v3 2/5] lib: Add Sed-opal library   Christoph Hellwig
• [PATCH v3 2/5] lib: Add Sed-opal library   Christoph Hellwig
• [PATCH] nvme: use __iowrite64_copy for SQs in the CMB   Christoph Hellwig
• [PATCH] nvmet: fix KATO offset in Set Features   Christoph Hellwig
• Q: nvme_rdma and reconnect   Christoph Hellwig
• Q: nvme_rdma and reconnect   Sagi Grimberg
• Q: nvme_rdma and reconnect   Christoph Hellwig
• Q: nvme_rdma and reconnect   Hannes Reinecke
• Q: nvme_rdma and reconnect   Christoph Hellwig
• Q: nvme_rdma and reconnect   Sagi Grimberg
• Enabling RoCEv2 and connecting to IPv6 targets   Sagi Grimberg
• Enabling RoCEv2 and connecting to IPv6 targets   Narayan Ayalasomayajula
• [GIT PULL] NVMe updates   Christoph Hellwig
• [GIT PULL] NVMe updates   Jens Axboe
• [PATCH 0/3] nvme fc: Sync with FC-NVME spec rev 1.14   James Smart
• [PATCH 1/3] Sync FC-NVME header with standard   James Smart
• [PATCH 2/3] nvme_fc: Add check of status_code in ERSP_IU   James Smart
• [PATCH 3/3] nvmet_fc: Sync NVME LS reject reasons with spec   James Smart
• [PATCH] nvme_fc: correct LS validation   James Smart
• [PATCH] nvmet_fc: Clear SG list to avoid double frees   James Smart
• [PATCH] nvmet_fc: correct logic in disconnect queue LS handling   James Smart
• [PATCH] nvmet_fc: cleanup of abort flag processing in fcp_op_done   James Smart
• [PATCH v3 4/5] nvme: Implement resume_from_suspend and SED Allocation code.   Jethro Beekman
• [PATCH v3 1/5] include: Add definitions for sed   Jethro Beekman
• [PATCH] nvme: admin-cmd: fix spelling mistake: "Counld" -> "Could"   Colin King
• LSF/MM 2017: Call for Proposals   Jeff Layton
• [PATCH v3 4/5] nvme: Implement resume_from_suspend and SED Allocation code.   Scott Bauer
• [PATCH v3 1/5] include: Add definitions for sed   Scott Bauer
• [PATCH v3 4/5] nvme: Implement resume_from_suspend and SED Allocation code.   Christoph Hellwig
• [PATCH] nvme/quirk: apply DELAY_BEFORE_CHK_RDY quirk at probe time too   Guilherme G. Piccoli
• How to run NVMe over Fabric on Softiwarp   LiuLele
• [PATCH v4 0/6] SED OPAL Library   Scott Bauer
• [PATCH v4 1/6] Include: Uapi: Add user ABI for Sed/Opal   Scott Bauer
• [PATCH v4 2/6] block: Add Sed-opal library   Scott Bauer
• [PATCH v4 3/6] block: add ioctl interface for interfacing with Opal library   Scott Bauer
• [PATCH v4 4/6] block: Add Opal Files to Makefile & add config option to Kconfig   Scott Bauer
• [PATCH v4 5/6] nvme: Add Support for Opal: Unlock from S3 & Opal Allocation/Ioctls   Scott Bauer
• [PATCH v4 6/6] Maintainers: Add maintainer info for SED/Opal library   Scott Bauer
• [PATCH v4 0/6] SED OPAL Library   Scott Bauer
• [PATCH v4 0/6] SED OPAL Library   Christoph Hellwig
• How to run NVMe over Fabric on Softiwarp   Christoph Hellwig
• [PATCH v4 2/6] block: Add Sed-opal library   Jon Derrick
• [PATCH v4 0/6] SED OPAL Library   Scott Bauer
• [PATCH v4 0/6] SED OPAL Library   Christoph Hellwig
• [PATCH v4 0/6] SED OPAL Library   Scott Bauer
• [PATCH v4 0/6] SED OPAL Library   Christoph Hellwig

Last message date: Fri Dec 30 21:47:35 PST 2016
Archived on: Fri Dec 30 21:47:37 PST 2016

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...