April 2022 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Fri Apr 1 03:35:51 PDT 2022
Ending: Sat Apr 30 09:00:01 PDT 2022
Messages: 217

• [PATCH v4 00/13] gpiolib: Two new helpers and way toward fwnode   Andy Shevchenko
• [PATCH v4 01/13] gpiolib: Introduce for_each_gpiochip_node() loop helper   Andy Shevchenko
• [PATCH v4 02/13] gpiolib: Introduce gpiochip_node_count() helper   Andy Shevchenko
• [PATCH v4 03/13] pinctrl: stm32: Replace custom code by gpiochip_node_count() call   Andy Shevchenko
• [PATCH v4 04/13] pinctrl: stm32: Switch to use for_each_gpiochip_node() helper   Andy Shevchenko
• [PATCH v4 05/13] pinctrl: samsung: Switch to use for_each_gpiochip_node() helper   Andy Shevchenko
• [PATCH v4 06/13] pinctrl: renesas: rza1: Replace custom code by gpiochip_node_count() call   Andy Shevchenko
• [PATCH v4 07/13] pinctrl: renesas: rza1: Switch to use for_each_gpiochip_node() helper   Andy Shevchenko
• [PATCH v4 08/13] pinctrl: npcm7xx: Switch to use for_each_gpiochip_node() helper   Andy Shevchenko
• [PATCH v4 09/13] pinctrl: meson: Rename REG_* to MESON_REG_*   Andy Shevchenko
• [PATCH v4 10/13] pinctrl: meson: Enable COMPILE_TEST   Andy Shevchenko
• [PATCH v4 11/13] pinctrl: meson: Replace custom code by gpiochip_node_count() call   Andy Shevchenko
• [PATCH v4 12/13] pinctrl: armada-37xx: Switch to use fwnode instead of of_node   Andy Shevchenko
• [PATCH v4 13/13] pinctrl: armada-37xx: Reuse GPIO fwnode in armada_37xx_irqchip_register()   Andy Shevchenko
• [PATCH V0] arm64: dts: add support for S4 power domain controller   Shunzhou Jiang
• (EXT) Re: [PATCH v2 3/3] clk: Drop the rate range on clk_put   Alexander Stein
• (EXT) Re: [PATCH v2 3/3] clk: Drop the rate range on clk_put   Maxime Ripard
• [PATCH v2 3/3] clk: Drop the rate range on clk_put   Maxime Ripard
• (EXT) Re: (EXT) Re: [PATCH v2 3/3] clk: Drop the rate range on clk_put   Alexander Stein
• (EXT) Re: (EXT) Re: [PATCH v2 3/3] clk: Drop the rate range on clk_put   Maxime Ripard
• (EXT) Re: (EXT) Re: (EXT) Re: [PATCH v2 3/3] clk: Drop the rate range on clk_put   Alexander Stein
• (EXT) Re: (EXT) Re: (EXT) Re: [PATCH v2 3/3] clk: Drop the rate range on clk_put   Maxime Ripard
• (EXT) Re: (EXT) Re: (EXT) Re: (EXT) Re: [PATCH v2 3/3] clk: Drop the rate range on clk_put   Alexander Stein
• (EXT) Re: (EXT) Re: (EXT) Re: (EXT) Re: [PATCH v2 3/3] clk: Drop the rate range on clk_put   Maxime Ripard
• [RFC PATCH 00/10] mmc: improve API to make clear {h|s}w_reset is for cards   Wolfram Sang
• [PATCH v4 0/2] refine the NFC clock framework   Liang Yang
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Liang Yang
• [PATCH v4 2/2] dt-bindings: nand: meson: refine Amlogic NAND controller driver   Liang Yang
• (EXT) Re: [PATCH v2 3/3] clk: Drop the rate range on clk_put   Maxime Ripard
• [PATCH v2 3/3] clk: Drop the rate range on clk_put   Stephen Boyd
• (EXT) Re: (EXT) Re: (EXT) Re: (EXT) Re: (EXT) Re: [PATCH v2 3/3] clk: Drop the rate range on clk_put   Alexander Stein
• (EXT) Re: (EXT) Re: (EXT) Re: (EXT) Re: (EXT) Re: [PATCH v2 3/3] clk: Drop the rate range on clk_put   Maxime Ripard
• [PATCH v2 1/2] arm64: dts: meson: remove CPU opps below 1GHz for G12B boards   Neil Armstrong
• [PATCH v2 2/2] arm64: dts: meson: remove CPU opps below 1GHz for SM1 boards   Neil Armstrong
• [PATCH v2 0/2] arm64: dts: meson: remove CPU opps below 1GHz for G12B/SM1   Neil Armstrong
• [PATCH v2 0/4] arm64: meson: update dts for JetHub devices   Neil Armstrong
• [PATCH 0/3] Ensure Low period of SCL is correct   Neil Armstrong
• [PATCH v2 0/4] arm64: meson: update dts for JetHub devices   Neil Armstrong
• [PATCH V0] arm64: dts: add support for S4 power domain controller   Neil Armstrong
• [PATCH] arm64: dts: meson-s4: add gpio_intc node   Neil Armstrong
• [PATCH] arm64: dts: meson-s4: add pinctrl node   Neil Armstrong
• [PATCH V0] arm64: dts: add support for S4 power domain controller   Neil Armstrong
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Miquel Raynal
• [PATCH 0/3] reset: meson-s4: add reset driver   Philipp Zabel
• [PATCH v2 0/4] arm64: meson: update dts for JetHub devices   Vyacheslav
• (EXT) Re: (EXT) Re: (EXT) Re: (EXT) Re: (EXT) Re: (EXT) Re: [PATCH v2 3/3] clk: Drop the rate range on clk_put   Alexander Stein
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Neil Armstrong
• [PATCH v2] pinctrl: meson: fix unused variable warning   Neil Armstrong
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   kernel test robot
• [PATCH 0/3] Ensure Low period of SCL is correct   Vyacheslav
• [PATCH 2/3] i2c: meson: Use 50% duty cycle for I2C clock   Neil Armstrong
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   kernel test robot
• [PATCH v4 01/13] gpiolib: Introduce for_each_gpiochip_node() loop helper   Bartosz Golaszewski
• [PATCH v4 02/13] gpiolib: Introduce gpiochip_node_count() helper   Bartosz Golaszewski
• [PATCH 0/3] Ensure Low period of SCL is correct   Neil Armstrong
• [PATCH v2 0/2] ASoC: meson: aiu: fix duplicate debugfs directory error   Mark Brown
• [PATCH 2/3] i2c: meson: Use 50% duty cycle for I2C clock   Neil Armstrong
• [PATCH v2 0/2] ASoC: meson: aiu: fix duplicate debugfs directory error   Mark Brown
• [PATCH v2 3/3] clk: Drop the rate range on clk_put   Maxime Ripard
• [PATCH v2 3/3] clk: Drop the rate range on clk_put   Tony Lindgren
• (EXT) Re: (EXT) Re: (EXT) Re: (EXT) Re: (EXT) Re: (EXT) Re: [PATCH v2 3/3] clk: Drop the rate range on clk_put   Maxime Ripard
• [PATCH 0/3] Use DIV_ROUND_CLOSEST to calculate baud rate,   Yu Tu
• [PATCH 1/3] tty: serial: meson: Use DIV_ROUND_CLOSEST to calculate baud rates   Yu Tu
• [PATCH 2/3] tty: serial: meson: Added 12Mhz as the clock source for calculating baud rate   Yu Tu
• [PATCH 3/3] tty: serial: meson: Added S4 SOC compatibility   Yu Tu
• [PATCH] clk: meson: meson8b: fix a memory leak in meson8b_clkc_init_common()   xkernel.wang at foxmail.com
• [PATCH] clk: meson: meson8b: fix a memory leak in meson8b_clkc_init_common()   Philipp Zabel
• [PATCH v2 3/3] clk: Drop the rate range on clk_put   Tony Lindgren
• [PATCH v2 3/3] clk: Drop the rate range on clk_put   Maxime Ripard
• [PATCH 1/3] tty: serial: meson: Use DIV_ROUND_CLOSEST to calculate baud rates   Neil Armstrong
• [PATCH 2/3] tty: serial: meson: Added 12Mhz as the clock source for calculating baud rate   Neil Armstrong
• [PATCH 1/2] ARM: dts: meson: align SPI NOR node name with dtschema   Krzysztof Kozlowski
• [PATCH 2/2] arm64: dts: meson: align SPI NOR node name with dtschema   Krzysztof Kozlowski
• [PATCH V4] arm64: dts: add support for S4 based Amlogic AQ222   Rob Herring
• [PATCH v2 3/3] clk: Drop the rate range on clk_put   Tony Lindgren
• [PATCH] arm64: dts: remove cpu compatible "arm,armv8" for s4   Xianwei Zhao
• [PATCH V4] arm64: dts: add support for S4 based Amlogic AQ222   xianwei.zhao
• [PATCH 2/3] i2c: meson: Use 50% duty cycle for I2C clock   Lucas Tanure
• [PATCH 0/3] Ensure Low period of SCL is correct   Lucas Tanure
• [PATCH 1/2] ARM: dts: meson: align SPI NOR node name with dtschema   Neil Armstrong
• [PATCH 2/2] arm64: dts: meson: align SPI NOR node name with dtschema   Neil Armstrong
• [PATCH] arm64: dts: remove cpu compatible "arm,armv8" for s4   Neil Armstrong
• [PATCH] arm64: dts: remove cpu compatible "arm,armv8" for s4   Neil Armstrong
• [PATCH 1/2] ARM: dts: meson: align SPI NOR node name with dtschema   Neil Armstrong
• [PATCH 1/2] ARM: dts: meson: align SPI NOR node name with dtschema   Neil Armstrong
• [PATCH 0/3] mmc: improve API to make clear {h|s}w_reset is for cards   Wolfram Sang
• [PATCH 3/3] mmc: improve API to make clear hw_reset callback is for cards   Wolfram Sang
• [PATCH 0/3] mmc: improve API to make clear {h|s}w_reset is for cards   Ulf Hansson
• [PATCH v4 05/13] pinctrl: samsung: Switch to use for_each_gpiochip_node() helper   Krzysztof Kozlowski
• [PATCH v4 05/13] pinctrl: samsung: Switch to use for_each_gpiochip_node() helper   Andy Shevchenko
• [PATCH] arm64: dts: meson: alpa sort the board Makefile   Christian Hewitt
• [PATCH v4 05/13] pinctrl: samsung: Switch to use for_each_gpiochip_node() helper   Krzysztof Kozlowski
• [PATCH v2 0/2] Ensure High and Low periods of SCL are correct   Lucas Tanure
• [PATCH v2 1/2] i2c: meson: Use _SHIFT and _MASK for register definitions   Lucas Tanure
• [PATCH v2 2/2] i2c: meson: Use 50% duty cycle for I2C clock   Lucas Tanure
• [PATCH] arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO pin labeling for CON1   Guillaume Giraudon
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Liang Yang
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Liang Yang
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Miquel Raynal
• [PATCH v2 1/2] i2c: meson: Use _SHIFT and _MASK for register definitions   Neil Armstrong
• [PATCH v2 2/2] i2c: meson: Use 50% duty cycle for I2C clock   Neil Armstrong
• [PATCH v2 0/2] Ensure High and Low periods of SCL are correct   Neil Armstrong
• [PATCH] arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO pin labeling for CON1   Neil Armstrong
• [PATCH] arm64: dts: meson: alpa sort the board Makefile   Neil Armstrong
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Liang Yang
• [PATCH v4 09/13] pinctrl: meson: Rename REG_* to MESON_REG_*   Geert Uytterhoeven
• [PATCH v4 09/13] pinctrl: meson: Rename REG_* to MESON_REG_*   Andy Shevchenko
• [PATCH v4 09/13] pinctrl: meson: Rename REG_* to MESON_REG_*   Andy Shevchenko
• [PATCH v4 05/13] pinctrl: samsung: Switch to use for_each_gpiochip_node() helper   Andy Shevchenko
• [PATCH v4 00/13] gpiolib: Two new helpers and way toward fwnode   Andy Shevchenko
• [PATCH v4 05/13] pinctrl: samsung: Switch to use for_each_gpiochip_node() helper   Krzysztof Kozlowski
• [PATCH v4 05/13] pinctrl: samsung: Switch to use for_each_gpiochip_node() helper   Krzysztof Kozlowski
• [PATCH] arm64: dts: meson: alpa sort the board Makefile   Neil Armstrong
• [PATCH v4 05/13] pinctrl: samsung: Switch to use for_each_gpiochip_node() helper   Andy Shevchenko
• [PATCH RESEND] arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO pin labeling for CON1   Guillaume Giraudon
• [PATCH RESEND] arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO pin labeling for CON1   Neil Armstrong
• [PATCH RESEND] arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO pin labeling for CON1   ggiraudon at prism19.com
• [PATCH v2] arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO pin labeling for CON1   Guillaume Giraudon
• [PATCH v2] arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO pin labeling for CON1   Neil Armstrong
• [PATCH v2] arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO pin labeling for CON1   Neil Armstrong
• [GIT PULL] amlogic fixes for v5.18-rc   Neil Armstrong
• [PATCH v4 11/13] pinctrl: meson: Replace custom code by gpiochip_node_count() call   Marek Szyprowski
• Amlogic A311D2 Support   Furkan Salman
• [PATCH v4 11/13] pinctrl: meson: Replace custom code by gpiochip_node_count() call   Andy Shevchenko
• [PATCH v4 11/13] pinctrl: meson: Replace custom code by gpiochip_node_count() call   Martin Blumenstingl
• [PATCH v4 11/13] pinctrl: meson: Replace custom code by gpiochip_node_count() call   Andy Shevchenko
• [PATCH v4 11/13] pinctrl: meson: Replace custom code by gpiochip_node_count() call   Andy Shevchenko
• [PATCH v4 11/13] pinctrl: meson: Replace custom code by gpiochip_node_count() call   Andy Shevchenko
• [PATCH v5 0/6] gpiolib: more helpers and fwnode conversion   Andy Shevchenko
• [PATCH v5 1/6] gpiolib: Introduce a helper to get first GPIO controller node   Andy Shevchenko
• [PATCH v5 2/6] pinctrl: armada-37xx: Switch to use fwnode instead of of_node   Andy Shevchenko
• [PATCH v5 3/6] pinctrl: armada-37xx: Reuse GPIO fwnode in armada_37xx_irqchip_register()   Andy Shevchenko
• [PATCH v5 4/6] pinctrl: meson: Rename REG_* to MESON_REG_*   Andy Shevchenko
• [PATCH v5 5/6] pinctrl: meson: Enable COMPILE_TEST   Andy Shevchenko
• [PATCH v5 6/6] pinctrl: meson: Replace custom code by gpiochip_node_count() call   Andy Shevchenko
• [PATCH v5 0/6] gpiolib: more helpers and fwnode conversion   Marek Szyprowski
• [PATCH 2/3] tty: serial: meson: Added 12Mhz as the clock source for calculating baud rate   Yu Tu
• [PATCH] phy: amlogic: fix error path in phy_g12a_usb3_pcie_probe()   Heiner Kallweit
• [PATCH v2 1/2] i2c: meson: Use _SHIFT and _MASK for register definitions   Wolfram Sang
• [PATCH v2 2/2] i2c: meson: Use 50% duty cycle for I2C clock   Wolfram Sang
• [PATCH] mmc: meson-gx: switch to device-managed dmam_alloc_coherent()   Heiner Kallweit
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Liang Yang
• [PATCH V2 0/2] Add q 12MHz internal clock rate to calculate   Yu Tu
• [PATCH V2 1/2] tty: serial: meson: Add a 12MHz internal clock rate to calculate baud rate in order to meet the baud rate requirements of special BT modules   Yu Tu
• [PATCH V2 2/2] tty: serial: meson: Added S4 SOC compatibility   Yu Tu
• [PATCH V2 1/2] tty: serial: meson: Add a 12MHz internal clock rate to calculate baud rate in order to meet the baud rate requirements of special BT modules   Andy Shevchenko
• [PATCH] clk: meson: meson8b: fix a memory leak in meson8b_clkc_init_common()   Martin Blumenstingl
• [PATCH V2 1/2] tty: serial: meson: Add a 12MHz internal clock rate to calculate baud rate in order to meet the baud rate requirements of special BT modules   Yu Tu
• [PATCH V2 1/2] tty: serial: meson: Add a 12MHz internal clock rate to calculate baud rate in order to meet the baud rate requirements of special BT modules   Jiri Slaby
• [PATCH V2 1/2] tty: serial: meson: Add a 12MHz internal clock rate to calculate baud rate in order to meet the baud rate requirements of special BT modules   Andy Shevchenko
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Miquel Raynal
• [PATCH V2 1/2] tty: serial: meson: Add a 12MHz internal clock rate to calculate baud rate in order to meet the baud rate requirements of special BT modules   Yu Tu
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Liang Yang
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Miquel Raynal
• [PATCH v5 0/6] gpiolib: more helpers and fwnode conversion   Linus Walleij
• [PATCH v5 2/6] dt-bindings: auxdisplay: Add Titan Micro Electronics TM1628   Robin Murphy
• [PATCH v2] pinctrl: meson: fix unused variable warning   Linus Walleij
• [PATCH v5 2/6] dt-bindings: auxdisplay: Add Titan Micro Electronics TM1628   Robin Murphy
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Liang Yang
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Miquel Raynal
• [PATCH v4 2/2] dt-bindings: nand: meson: refine Amlogic NAND controller driver   Miquel Raynal
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Liang Yang
• [PATCH] phy: amlogic: fix error path in phy_g12a_usb3_pcie_probe()   Vinod Koul
• [PATCH v4 2/2] dt-bindings: nand: meson: refine Amlogic NAND controller driver   Liang Yang
• [PATCH v4 2/2] dt-bindings: nand: meson: refine Amlogic NAND controller driver   Miquel Raynal
• [PATCH v4 2/2] dt-bindings: nand: meson: refine Amlogic NAND controller driver   Liang Yang
• [PATCH v5 2/6] dt-bindings: auxdisplay: Add Titan Micro Electronics TM1628   Heiner Kallweit
• Fw: [PATCH v2] pwm: meson: external clock configuration for s4   Neil Armstrong
• [PATCH V2 1/2] tty: serial: meson: Add a 12MHz internal clock rate to calculate baud rate in order to meet the baud rate requirements of special BT modules   Neil Armstrong
• [PATCH V2 1/2] tty: serial: meson: Add a 12MHz internal clock rate to calculate baud rate in order to meet the baud rate requirements of special BT modules   Neil Armstrong
• [PATCH V2 2/2] tty: serial: meson: Added S4 SOC compatibility   Neil Armstrong
• [PATCH -next] i2c: meson: fix missing clk_disable_unprepare() on error in meson_i2c_probe()   Yang Yingliang
• [PATCH V2 1/2] tty: serial: meson: Add a 12MHz internal clock rate to calculate baud rate in order to meet the baud rate requirements of special BT modules   Yu Tu
• [PATCH V2 2/2] tty: serial: meson: Added S4 SOC compatibility   Yu Tu
• [PATCH -next] i2c: meson: fix missing clk_disable_unprepare() on error in meson_i2c_probe()   Neil Armstrong
• [PATCH v1 0/3] ASoC: meson: Fix mixer-test issues   Mark Brown
• [PATCH v1 1/3] ASoC: meson: Fix event generation for AUI ACODEC mux   Mark Brown
• [PATCH v1 2/3] ASoC: meson: Fix event generation for AUI CODEC mux   Mark Brown
• [PATCH v1 3/3] ASoC: meson: Fix event generation for G12A tohdmi mux   Mark Brown
• [PATCH v1 0/3] ASoC: meson: Fix mixer-test issues   Jerome Brunet
• [PATCH v1 0/3] ASoC: meson: Fix mixer-test issues   Mark Brown
• [PATCH] mmc: meson-gx: switch to device-managed dmam_alloc_coherent()   Ulf Hansson
• [PATCH 1/2] Revert "ASoC: meson: axg-tdm-interface: manage formatters in trigger"   Neil Armstrong
• [PATCH 2/2] Revert "ASoC: meson: axg-card: make links nonatomic"   Neil Armstrong
• [PATCH 1/2] Revert "ASoC: meson: axg-tdm-interface: manage formatters in trigger"   Jerome Brunet
• [PATCH 1/2] Revert "ASoC: meson: axg-tdm-interface: manage formatters in trigger"   Mark Brown
• [PATCH 1/2] Revert "ASoC: meson: axg-tdm-interface: manage formatters in trigger"   Mark Brown
• [PATCH v1 0/3] ASoC: meson: Fix mixer-test issues   Mark Brown
• [PATCH 1/2] Revert "ASoC: meson: axg-tdm-interface: manage formatters in trigger"   Mark Brown
• [PATCH 1/2] Revert "ASoC: meson: axg-tdm-interface: manage formatters in trigger"   Neil Armstrong
• [PATCH V3 0/2] Add q 12MHz internal clock rate to calculate   Yu Tu
• [PATCH V3 1/2] tty: serial: meson: Add a 12MHz internal clock rate to calculate baud rate in order to meet the baud rate requirements of special BT modules   Yu Tu
• [PATCH V3 2/2] tty: serial: meson: Added S4 SOC compatibility   Yu Tu
• [PATCH V3 1/2] tty: serial: meson: Add a 12MHz internal clock rate to calculate baud rate in order to meet the baud rate requirements of special BT modules   Neil Armstrong
• [PATCH V3 2/2] tty: serial: meson: Added S4 SOC compatibility   Neil Armstrong
• [PATCH V3 0/2] Add q 12MHz internal clock rate to calculate   Neil Armstrong
• [PATCH] clk: meson: meson8b: fix a memory leak in meson8b_clkc_init_common()   Stephen Boyd
• [PATCH v5 0/6] auxdisplay: Add support for the Titanmec TM1628 7 segment display controller   Miguel Ojeda
• [PATCH v5 0/6] auxdisplay: Add support for the Titanmec TM1628 7 segment display controller   Heiner Kallweit
• [PATCH] clk: meson: meson8b: fix a memory leak in meson8b_clkc_init_common()   Martin Blumenstingl
• [PATCH v5 1/6] gpiolib: Introduce a helper to get first GPIO controller node   Bartosz Golaszewski
• Solid green screen with experimental panfrost/hdmi sc2 support   Heiner Kallweit
• [PATCH RFC] tty: serial: meson: add new compatible for gxl uart   Heiner Kallweit
• [PATCH RFC] tty: serial: meson: add new compatible for gxl uart   Neil Armstrong
• Solid green screen with experimental panfrost/hdmi sc2 support   Neil Armstrong
• [PATCH RFC] tty: serial: meson: add new compatible for gxl uart   Heiner Kallweit
• Solid green screen with experimental panfrost/hdmi sc2 support   Heiner Kallweit
• [PATCH v5 1/6] gpiolib: Introduce a helper to get first GPIO controller node   Andy Shevchenko
• [PATCH printk v5 1/1] printk: extend console_lock for per-console locking   Marek Szyprowski
• [PATCH printk v5 1/1] printk: extend console_lock for per-console locking   Petr Mladek
• Solid green screen with experimental panfrost/hdmi sc2 support   Heiner Kallweit
• [PATCH printk v5 1/1] printk: extend console_lock for per-console locking   Marek Szyprowski
• [PATCH printk v5 1/1] printk: extend console_lock for per-console locking   John Ogness
• [PATCH printk v5 1/1] printk: extend console_lock for per-console locking   Petr Mladek
• [PATCH printk v5 1/1] printk: extend console_lock for per-console locking   Petr Mladek
• [PATCH printk v5 1/1] printk: extend console_lock for per-console locking   Marek Szyprowski
• [PATCH printk v5 1/1] printk: extend console_lock for per-console locking   John Ogness

Last message date: Sat Apr 30 09:00:01 PDT 2022
Archived on: Sat Apr 30 09:00:11 PDT 2022

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...