[PATCH v2 1/2] i2c: meson: Use _SHIFT and _MASK for register definitions
Lucas Tanure
tanure at linux.com
Sat Apr 9 09:43:33 PDT 2022
Differentiate between masks and shifts
Signed-off-by: Lucas Tanure <tanure at linux.com>
---
drivers/i2c/busses/i2c-meson.c | 41 ++++++++++++++++++----------------
1 file changed, 22 insertions(+), 19 deletions(-)
diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c
index 07eb819072c4..4b4a5b2d77ab 100644
--- a/drivers/i2c/busses/i2c-meson.c
+++ b/drivers/i2c/busses/i2c-meson.c
@@ -30,18 +30,21 @@
#define REG_TOK_RDATA1 0x1c
/* Control register fields */
-#define REG_CTRL_START BIT(0)
-#define REG_CTRL_ACK_IGNORE BIT(1)
-#define REG_CTRL_STATUS BIT(2)
-#define REG_CTRL_ERROR BIT(3)
-#define REG_CTRL_CLKDIV GENMASK(21, 12)
-#define REG_CTRL_CLKDIVEXT GENMASK(29, 28)
-
-#define REG_SLV_ADDR GENMASK(7, 0)
-#define REG_SLV_SDA_FILTER GENMASK(10, 8)
-#define REG_SLV_SCL_FILTER GENMASK(13, 11)
-#define REG_SLV_SCL_LOW GENMASK(27, 16)
-#define REG_SLV_SCL_LOW_EN BIT(28)
+#define REG_CTRL_START BIT(0)
+#define REG_CTRL_ACK_IGNORE BIT(1)
+#define REG_CTRL_STATUS BIT(2)
+#define REG_CTRL_ERROR BIT(3)
+#define REG_CTRL_CLKDIV_SHIFT 12
+#define REG_CTRL_CLKDIV_MASK GENMASK(21, REG_CTRL_CLKDIV_SHIFT)
+#define REG_CTRL_CLKDIVEXT_SHIFT 28
+#define REG_CTRL_CLKDIVEXT_MASK GENMASK(29, REG_CTRL_CLKDIVEXT_SHIFT)
+
+#define REG_SLV_ADDR_MASK GENMASK(7, 0)
+#define REG_SLV_SDA_FILTER_MASK GENMASK(10, 8)
+#define REG_SLV_SCL_FILTER_MASK GENMASK(13, 11)
+#define REG_SLV_SCL_LOW_SHIFT 16
+#define REG_SLV_SCL_LOW_MASK GENMASK(27, REG_SLV_SCL_LOW_SHIFT)
+#define REG_SLV_SCL_LOW_EN BIT(28)
#define I2C_TIMEOUT_MS 500
#define FILTER_DELAY 15
@@ -149,11 +152,11 @@ static void meson_i2c_set_clk_div(struct meson_i2c *i2c, unsigned int freq)
div = GENMASK(11, 0);
}
- meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIV,
- FIELD_PREP(REG_CTRL_CLKDIV, div & GENMASK(9, 0)));
+ meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIV_MASK,
+ FIELD_PREP(REG_CTRL_CLKDIV_MASK, div & GENMASK(9, 0)));
- meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIVEXT,
- FIELD_PREP(REG_CTRL_CLKDIVEXT, div >> 10));
+ meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIVEXT_MASK,
+ FIELD_PREP(REG_CTRL_CLKDIVEXT_MASK, div >> 10));
/* Disable HIGH/LOW mode */
meson_i2c_set_mask(i2c, REG_SLAVE_ADDR, REG_SLV_SCL_LOW_EN, 0);
@@ -292,8 +295,8 @@ static void meson_i2c_do_start(struct meson_i2c *i2c, struct i2c_msg *msg)
TOKEN_SLAVE_ADDR_WRITE;
- meson_i2c_set_mask(i2c, REG_SLAVE_ADDR, REG_SLV_ADDR,
- FIELD_PREP(REG_SLV_ADDR, msg->addr << 1));
+ meson_i2c_set_mask(i2c, REG_SLAVE_ADDR, REG_SLV_ADDR_MASK,
+ FIELD_PREP(REG_SLV_ADDR_MASK, msg->addr << 1));
meson_i2c_add_token(i2c, TOKEN_START);
meson_i2c_add_token(i2c, token);
@@ -467,7 +470,7 @@ static int meson_i2c_probe(struct platform_device *pdev)
/* Disable filtering */
meson_i2c_set_mask(i2c, REG_SLAVE_ADDR,
- REG_SLV_SDA_FILTER | REG_SLV_SCL_FILTER, 0);
+ REG_SLV_SDA_FILTER_MASK | REG_SLV_SCL_FILTER_MASK, 0);
meson_i2c_set_clk_div(i2c, timings.bus_freq_hz);
--
2.35.1
More information about the linux-amlogic
mailing list