March 2021 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Mon Mar 1 07:50:35 GMT 2021
Ending: Wed Mar 31 23:37:14 BST 2021
Messages: 465

• [openwrt/openwrt] bcm4908: backport Ethernet driver fixes from the 5.12   LEDE Commits
• [openwrt/openwrt] mvebu/omnia: fix the device tree   LEDE Commits
• [openwrt/openwrt] mediatek: mt7622: rename mt7622-ubi to mt7622-rfb1-ubi   LEDE Commits
• [openwrt/openwrt] mediatek: mt7622: enable CONFIG_SPI_MTK_NOR   LEDE Commits
• [openwrt/openwrt] tools: xxd: use more convenient source tarball   LEDE Commits
• [openwrt/openwrt] toolchain/autoconf-lean: add check for ssize_t   LEDE Commits
• [openwrt/openwrt] build: prevent dupes in autotools.mk   LEDE Commits
• [openwrt/openwrt] bmips: switch to upstream SMP CPU mappings patch   LEDE Commits
• [openwrt/openwrt] tools/xxd: fix source URL   LEDE Commits
• [openwrt/openwrt] kernel: add the latest mtd patch extending ofpart parser   LEDE Commits
• [openwrt/openwrt] mediatek: mt7622: bpi-r64: simplify eMMC install procedure   LEDE Commits
• [openwrt/openwrt] mediatek: mt7622: bpi-r64: fix sysupgrade on empty disk   LEDE Commits
• [openwrt/openwrt] hostapd: P2P: Fix a corner case in peer addition based on PD Request   LEDE Commits
• [openwrt/openwrt] mpc85xx: p2020: fix cfi-nor detection   LEDE Commits
• [openwrt/openwrt] uboot-sunxi: add missing type __u64   LEDE Commits
• [openwrt/openwrt] uboot-envtools: adjust compile patch to version v2021.01   LEDE Commits
• [openwrt/openwrt] Revert "base-files: source functions.sh in /lib/functions/system.sh"   LEDE Commits
• [openwrt/openwrt] uboot-mediatek: bpi-r64: fix eMMC installation menu label   LEDE Commits
• [openwrt/openwrt] mediatek: mt7622: blue LED should be active high as well   LEDE Commits
• [openwrt/openwrt] mediatek: mt7622: make sure image generation can run in parallel   LEDE Commits
• [openwrt/openwrt] uboot-mediatek: bpi-r64: make sure eMMC installation runs only once   LEDE Commits
• [openwrt/openwrt] Revert "toolchain/autoconf-lean: add check for ssize_t"   LEDE Commits
• [openwrt/openwrt] Revert "build: use config.site generated by autoconf-lean, drop hardcoded sitefiles"   LEDE Commits
• [openwrt/openwrt] Revert "toolchain: add autoconf-lean"   LEDE Commits
• [openwrt/openwrt] bmips: switch to upstream brcmnand patch   LEDE Commits
• [openwrt/openwrt] libubox: update to git HEAD   LEDE Commits
• [openwrt/openwrt] procd: update to git HEAD   LEDE Commits
• [openwrt/openwrt] fstools: update to git HEAD   LEDE Commits
• [openwrt/openwrt] firmware-utils/ptgen: fix compile warnings   LEDE Commits
• [openwrt/openwrt] firmware-utils/ptgen: fix partition guid and name   LEDE Commits
• [openwrt/openwrt] firmware-utils/ptgen: add support for hybrid MBR   LEDE Commits
• [openwrt/openwrt] firmware-utils/ptgen: change GPT to LBA addressing   LEDE Commits
• [openwrt/openwrt] mediatek: mt7622: use ptgen generated MBR header   LEDE Commits
• [openwrt/openwrt] mediatek: mt7622: change image generation   LEDE Commits
• [openwrt/openwrt] arm-trusted-firmware-mediatek: remove {e, sd}mmc headers   LEDE Commits
• [openwrt/openwrt] build: use numeric uid/gid on cpio calls   LEDE Commits
• [openwrt/openwrt] imx6: copy kernel 5.4 config and patches to 5.10   LEDE Commits
• [openwrt/openwrt] imx6: refresh kernel config with 5.10 symbols   LEDE Commits
• [openwrt/openwrt] imx6: add 5.10 as testing kernel   LEDE Commits
• [openwrt/openwrt] kernel: generic: add further missing symbols   LEDE Commits
• [openwrt/openwrt] build: make GCC version 6+ minimal host build requirement   LEDE Commits
• [openwrt/openwrt] build: fix checks for GCC11   LEDE Commits
• [openwrt/openwrt] Revert "build: replace which with Bash command built-in"   LEDE Commits
• [openwrt/openwrt] build: add which command to build requirements   LEDE Commits
• [openwrt/openwrt] feeds.conf.default: remove freifunk feed   LEDE Commits
• [openwrt/openwrt] feeds.conf.default: remove freifunk feed   LEDE Commits
• [openwrt/openwrt] build: fix checks for GCC11   LEDE Commits
• [openwrt/openwrt] Revert "build: replace which with Bash command built-in"   LEDE Commits
• [openwrt/openwrt] build: add which command to build requirements   LEDE Commits
• [openwrt/openwrt] mediatek: mt7622: check firmware metadata   LEDE Commits
• [openwrt/openwrt] kernel-5.4: bump to 5.4.102 and refresh patches   LEDE Commits
• [openwrt/openwrt] arm-trusted-firmware-mediatek: don't try to install absent files   LEDE Commits
• [openwrt/openwrt] ath79: replace chipselect workaround with a proper patch   LEDE Commits
• [openwrt/openwrt] ath79: enable AT803X PHY for kernel 5.10   LEDE Commits
• [openwrt/openwrt] ipq40xx: net: phy: qca807x: fix GPIO driver   LEDE Commits
• [openwrt/openwrt] fstools: fix build with glibc   LEDE Commits
• [openwrt/openwrt] bcm63xx-cfe: update to the latest master   LEDE Commits
• [openwrt/openwrt] ramips: rename mtk-hsdma to hsdma-mt7621   LEDE Commits
• [openwrt/openwrt] base-files: add new application led trigger backend   LEDE Commits
• [openwrt/openwrt] rssileds: use new application led trigger backend   LEDE Commits
• [openwrt/openwrt] bcm27xx: bcm2711: disable HW_RANDOM_BCM2835   LEDE Commits
• [openwrt/openwrt] bcm27xx: bcm2711: disable HW_RANDOM_BCM2835   LEDE Commits
• [openwrt/openwrt] kernel: b53: update the BCM5365 UID in the fixup   LEDE Commits
• [openwrt/openwrt] kernel: b53: update the BCM5365 UID   LEDE Commits
• [openwrt/openwrt] bcm63xx: rename upstreamed patch   LEDE Commits
• [openwrt/openwrt] kernel: remove symbols from 5.10 no longer present on upstream   LEDE Commits
• [openwrt/openwrt] kernel: backport GCC 10 usbip build fix for 5.4   LEDE Commits
• [openwrt/openwrt] generic: config-5.10: add missing symbols   LEDE Commits
• [openwrt/openwrt] kernel/modules: fix CDC NCM dependencies   LEDE Commits
• [openwrt/openwrt] kernel: backport GCC 10 usbip build fix for 5.4   LEDE Commits
• [openwrt/openwrt] bcm63xx-cfe: update to the latest master   LEDE Commits
• [openwrt/openwrt] bcm4908: prepare to support TP-Link Archer C2300 V1   LEDE Commits
• [openwrt/openwrt] scripts: mkits.sh: replace @ with - in nodes   LEDE Commits
• [openwrt/openwrt] build: use config-1 instead of config at 1 as default   LEDE Commits
• [openwrt/openwrt] arm-trusted-firmware-mediatek: update to ATF 2.4 (2021-02-25)   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.10 to 5.10.20   LEDE Commits
• [openwrt/openwrt] uboot-mediatek: improve BPi-R64 support   LEDE Commits
• [openwrt/openwrt] mediatek: mt7622: bpi-r64: allow MAC addresses to be inherited   LEDE Commits
• [openwrt/openwrt] apm821xx: add support for kernel 5.10 for testing   LEDE Commits
• [openwrt/openwrt] ramips: 5.4: refresh configs   LEDE Commits
• [openwrt/openwrt] ramips: add support for kernel 5.10   LEDE Commits
• [openwrt/openwrt] arm-trusted-firmware-mediatek: don't select DDR3_FLYBY for 1ddr   LEDE Commits
• [openwrt/openwrt] kernel: fix kmod-usb3 dependencies   LEDE Commits
• [openwrt/openwrt] arm-trusted-firmware-mediatek: prune now uneeded declarations   LEDE Commits
• [openwrt/openwrt] kernel: generic: filter out CONFIG_PLUGIN_HOSTCC   LEDE Commits
• [openwrt/openwrt] apm821xx, mt7621, oxnas, rockchip, zynq: remove PLUGIN_HOSTCC   LEDE Commits
• [openwrt/openwrt] kernel: fix kmod-usb3 on platforms without PCI   LEDE Commits
• [buildbot] phase1: dont include stderr output in stageroot variable   LEDE Commits
• [buildbot] phase1: fix gitcheckout with corrupted .git   LEDE Commits
• [buildbot] docker: update to 2.10.1   LEDE Commits
• [buildbot] docker: alphabetical sorting of packages   LEDE Commits
• [buildbot] scripts: remove migrated dumpinfo.pl script   LEDE Commits
• [buildbot] docker,worker: install qemu-utils   LEDE Commits
• [buildbot] phase1: make change links clickable   LEDE Commits
• [buildbot] docker: make TLS working   LEDE Commits
• [buildbot] phase1,2: fix missing tmp dir   LEDE Commits
• [buildbot] docker: fix Python cryptography build failure   LEDE Commits
• [buildbot] buildmaster: fix permissions   LEDE Commits
• [buildbot] buildmaster: replace horizons with JanitorConfigurator   LEDE Commits
• [buildbot] builtmaster,phase1: add missing services dict   LEDE Commits
• [buildbot] docker: buildslave: make TLS working   LEDE Commits
• [buildbot] GitLab CI integration   LEDE Commits
• [openwrt/openwrt] Revert "ramips: add support for kernel 5.10"   LEDE Commits
• [openwrt/openwrt] ramips: copy config-5.4 to config-5.10   LEDE Commits
• [openwrt/openwrt] ramips: 5.10: copy patches from 5.4   LEDE Commits
• [openwrt/openwrt] ramips: 5.10: delete upstreamed patches   LEDE Commits
• [openwrt/openwrt] ramips: 5.10: rename patches to follow guide   LEDE Commits
• [openwrt/openwrt] ramips: 5.10: port and refresh patches, ralink drv   LEDE Commits
• [openwrt/openwrt] ramips: 5.10: refresh configs   LEDE Commits
• [buildbot] ci: buildslave: fix Docker image tests   LEDE Commits
• [openwrt/openwrt] treewide: remove execute bit and shebang from board.d files   LEDE Commits
• [openwrt/openwrt] treewide: make AddDepends/usb-serial selective   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.4 to 5.4.102   LEDE Commits
• [openwrt/openwrt] build: fix checks for GCC11   LEDE Commits
• [openwrt/openwrt] hostapd: P2P: Fix a corner case in peer addition based on PD Request   LEDE Commits
• [openwrt/openwrt] wolfssl: bump to v4.7.0-stable   LEDE Commits
• [openwrt/openwrt] mediatek: disable RTC on Bananapi R64 and refresh patches   LEDE Commits
• [openwrt/openwrt] ipq40xx: work-around borked QCA SDK bootloader   LEDE Commits
• [openwrt/openwrt] ipq806x: work-around borked QCA SDK bootloader   LEDE Commits
• [openwrt/openwrt] mediatek: mt7622: remove execute bit and shebang from 01_leds   LEDE Commits
• [openwrt/openwrt] mediatek: remove no longer needed sysupgrade hack   LEDE Commits
• [openwrt/openwrt] bpftools: fix libbpf pkgconfig file   LEDE Commits
• [openwrt/openwrt] bpftools: fix param order for install on macOS   LEDE Commits
• [openwrt/openwrt] procd: update to git HEAD   LEDE Commits
• [openwrt/openwrt] bmips: automatically detect CPU frequency   LEDE Commits
• [openwrt/openwrt] bmips: remove unneeded console from bootargs   LEDE Commits
• [openwrt/openwrt] bmips: dts: comestic changes   LEDE Commits
• [openwrt/openwrt] bcm63xx: AD1018-nor: add NAND flash   LEDE Commits
• [openwrt/openwrt] bcm63xx: AD1018-nor: add NAND flash   LEDE Commits
• [openwrt/openwrt] bmips: improve CPU frequency patch   LEDE Commits
• [openwrt/openwrt] bmips: automatically detect RAM size   LEDE Commits
• [openwrt/openwrt] libsepol: update to version 3.2   LEDE Commits
• [openwrt/openwrt] libselinux: update to version 3.2   LEDE Commits
• [openwrt/openwrt] libsemanage: update to version 3.2   LEDE Commits
• [openwrt/openwrt] policycoreutils: update to version 3.2   LEDE Commits
• [openwrt/openwrt] secilc: update to version 3.2   LEDE Commits
• [openwrt/openwrt] checkpolicy: update to version 3.2   LEDE Commits
• [openwrt/openwrt] arm-trusted-firmware-mediatek: fix typo SPI-SNAND -> SPI-NAND   LEDE Commits
• [buildbot] Bump to version 3.0.0   LEDE Commits
• [openwrt/openwrt] include: store ABIVersion in Packages index   LEDE Commits
• [openwrt/openwrt] kernel: bump 4.14 to 4.14.223   LEDE Commits
• [openwrt/openwrt] kernel: bump 4.14 to 4.14.224   LEDE Commits
• [openwrt/openwrt] odhcp6c: add a odhcp6c.user placeholder script   LEDE Commits
• [openwrt/openwrt] netifd: add a udhcpc.user placeholder script   LEDE Commits
• [openwrt/openwrt] glibc: update to latest 2.33 commit (BZ #27462, BZ #27318, BZ #27389)   LEDE Commits
• [openwrt/openwrt] Revert "bcm53xx: add support for reading NVRAM based on DT mapping"   LEDE Commits
• [openwrt/openwrt] bcm53xx: backport NVMEM NVRAM driver   LEDE Commits
• [openwrt/openwrt] opkg: update to git HEAD   LEDE Commits
• [openwrt/openwrt] rpcd: update to git HEAD   LEDE Commits
• [openwrt/openwrt] tools: mkimage: add patches for 64-bit MediaTek BootROM   LEDE Commits
• [openwrt/openwrt] arm-trusted-firmware-mediatek: update to 2021-03-10   LEDE Commits
• [openwrt/openwrt] realtek: drop ethtool log noise   LEDE Commits
• [openwrt/openwrt] uboot-mediatek: update configs for MT7622 devies   LEDE Commits
• [openwrt/openwrt] bmips: switch to upstream bcm2835-rng reset patch   LEDE Commits
• [buildbot] treewide: use worker term   LEDE Commits
• [buildbot] buildworker: add swig package   LEDE Commits
• [buildbot] docker,worker: install gcc-mulitlib   LEDE Commits
• [openwrt/openwrt] kernel: backport Broadcom NVRAM driver cleanups   LEDE Commits
• [openwrt/openwrt] bcm53xx: initialize NVRAM from NVMEM driver   LEDE Commits
• [openwrt/openwrt] kernel: add two more missed 5.10 backports   LEDE Commits
• [openwrt/openwrt] kernel: move mtd ofpart accepted patch   LEDE Commits
• [openwrt/openwrt] kernel: add pending mtd patches adding NVMEM support   LEDE Commits
• [openwrt/openwrt] kernel: update 5.10 flow offload patches   LEDE Commits
• [openwrt/openwrt] kernel: add compatibility with upstream threaded NAPI patch   LEDE Commits
• [openwrt/openwrt] bcm47xx: make WGT634U NVRAM patch apply again   LEDE Commits
• [buildbot] buildworker: add Python2 package   LEDE Commits
• [openwrt/openwrt] uboot-mediatek: fix build on Mac OS X   LEDE Commits
• [openwrt/openwrt] mediatek: image: don't use 'M' unit as dd may not support that   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.4 to 5.4.105   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.10 to 5.10.23   LEDE Commits
• [openwrt/openwrt] gre: use alternative way to check if kernel support is enabled   LEDE Commits
• [openwrt/openwrt] vti: use alternative way to check if kernel support is enabled   LEDE Commits
• [openwrt/openwrt] xfrm: simplify the check for necessary kernel support   LEDE Commits
• [openwrt/openwrt] mvebu: LS421DE: make cosmetics changes in dts file   LEDE Commits
• [openwrt/openwrt] uboot-mediatek: import fix for AHCI and enable SATA   LEDE Commits
• [openwrt/openwrt] busybox: backport fixes for 1.33.0   LEDE Commits
• [openwrt/openwrt] busybox: backport fixes for 1.33.0   LEDE Commits
• [openwrt/openwrt] elfutils: remove host build from target package   LEDE Commits
• [openwrt/openwrt] tools/libelf: remove unneeded host library   LEDE Commits
• [buildbot] ci: use private runner   LEDE Commits
• [buildbot] ci: buildworker: disabled test temporarily   LEDE Commits
• [openwrt/openwrt] bmips: add experimental ethernet support   LEDE Commits
• [openwrt/openwrt] selinux-policy: update to version v0.8   LEDE Commits
• [openwrt/openwrt] realtek: Add generic zyxel_gs1900 image definition   LEDE Commits
• [openwrt/openwrt] realtek: Add ZyXEL GS1900-8   LEDE Commits
• [openwrt/openwrt] bmips: reorganize patches   LEDE Commits
• [openwrt/openwrt] bmips: minor ethernet driver cleanups and fixes   LEDE Commits
• [openwrt/openwrt] kernel: add missing config symbols for 5.10   LEDE Commits
• [openwrt/openwrt] kernel: support new mdio_devres.ko module in 5.10   LEDE Commits
• [openwrt/openwrt] x86: support kernel 5.10   LEDE Commits
• [openwrt/openwrt] bcm53xx: backport first 5.13 DTS changes   LEDE Commits
• [openwrt/openwrt] kernel: add compatibility with upstream threaded NAPI patch   LEDE Commits
• [openwrt/openwrt] bcm4908: use accepted 5.13 DTS patches   LEDE Commits
• [openwrt/openwrt] firmware-utils/ptgen: remove unused variable assignment   LEDE Commits
• [openwrt/openwrt] uboot-mediatek: select matching U-Boot for board   LEDE Commits
• [openwrt/openwrt] mediatek: mt7622: clean up image build   LEDE Commits
• [openwrt/openwrt] uboot-mediatek: also install production image to eMMC   LEDE Commits
• [openwrt/openwrt] opkg: update to git HEAD   LEDE Commits
• [openwrt/openwrt] opkg: update to git HEAD   LEDE Commits
• [openwrt/openwrt] gettext-full: disable nameless locale define   LEDE Commits
• [openwrt/openwrt] scripts,ipkg-build: apply shellcheck   LEDE Commits
• [openwrt/openwrt] scripts,ipkg-build: use realpath for pkg_dir   LEDE Commits
• [buildbot] Bump to latest Buildbot release 3.0.1   LEDE Commits
• [openwrt/openwrt] build: prereq: drop support for Python 3.5   LEDE Commits
• [openwrt/openwrt] mac80211: backport upstream patches for driver disconnect   LEDE Commits
• [openwrt/openwrt] mt76: update to the latest version   LEDE Commits
• [openwrt/openwrt] kernel: replace threaded NAPI implementation in 5.10 with upstream backport   LEDE Commits
• [openwrt/openwrt] mediatek: fix mtk parallel nand driver   LEDE Commits
• [openwrt/openwrt] tools: otrx: allow own magic   LEDE Commits
• [openwrt/openwrt] mtd: add option for TRX magic to fixtrx   LEDE Commits
• [openwrt/openwrt] mediatek: support non standard trx magic values   LEDE Commits
• [openwrt/openwrt] mediatek: add support for Buffalo WSR-2533DHP2   LEDE Commits
• [openwrt/openwrt] mediatek: mt7622: drop duplicate DEVICE_PACKAGES   LEDE Commits
• [openwrt/openwrt] bcm4908: backport first PHY 5.13 patches   LEDE Commits
• [openwrt/openwrt] ramips: rename mtk-hsdma to hsdma-mt7621   LEDE Commits
• [openwrt/openwrt] libsepol: update to version 3.2   LEDE Commits
• [openwrt/openwrt] libselinux: update to version 3.2   LEDE Commits
• [openwrt/openwrt] libsemanage: update to version 3.2   LEDE Commits
• [openwrt/openwrt] policycoreutils: update to version 3.2   LEDE Commits
• [openwrt/openwrt] secilc: update to version 3.2   LEDE Commits
• [openwrt/openwrt] checkpolicy: update to version 3.2   LEDE Commits
• [openwrt/openwrt] selinux-policy: update to version v0.8   LEDE Commits
• [openwrt/openwrt] include: store ABIVersion in Packages index   LEDE Commits
• [openwrt/openwrt] opkg: update to git HEAD   LEDE Commits
• [openwrt/openwrt] rpcd: update to git HEAD   LEDE Commits
• [buildbot] phase1,phase2: shuffle order of builds   LEDE Commits
• [buildbot] docker: master/worker: fix issue with latest stable sqlalchemy   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.4 to 5.4.105   LEDE Commits
• [openwrt/openwrt] x86/legacy: fix subtarget CPU for kernel 5.10   LEDE Commits
• [openwrt/openwrt] kernel: backports: mt7530: fix TRGMII mode after reset   LEDE Commits
• [openwrt/openwrt] bmips: dgnd3700-v2: fix ethernet   LEDE Commits
• [openwrt/openwrt] bmips: backport b53 spi device tree patch   LEDE Commits
• [openwrt/openwrt] bmips: enable CONFIG_B53_MDIO_DRIVER   LEDE Commits
• [openwrt/openwrt] bmips: backport bcm6368-mdio-mux support   LEDE Commits
• [openwrt/openwrt] mbedtls: update to 2.16.10   LEDE Commits
• [openwrt/openwrt] build,ib: add STRIP_ABI option for manifest   LEDE Commits
• [openwrt/openwrt] build,ib: add STRIP_ABI option for manifest   LEDE Commits
• [openwrt/openwrt] bcm4908: backport recent bcm4908_enet changes   LEDE Commits
• [openwrt/openwrt] bcm4908: backport recent bcm_sf2 changes   LEDE Commits
• [openwrt/openwrt] mtd: fix imagetag compilation   LEDE Commits
• [openwrt/openwrt] realtek: fix link-state interrupt   LEDE Commits
• [openwrt/openwrt] realtek: need to handle PHY_INTERFACE_MODE_NA for sfps   LEDE Commits
• [openwrt/openwrt] realtek: re-enable sfp driver for ZyXEL GS1900-10HP   LEDE Commits
• [openwrt/openwrt] realtek: enable HWMON for SFP sensors   LEDE Commits
• [openwrt/openwrt] realtek: enabled Marvell and Realtek PHYs   LEDE Commits
• [openwrt/openwrt] realtek: enable SerDes NWAY and SGMII negotiation   LEDE Commits
• [buildbot] phase1,phase2: implement round robin builds   LEDE Commits
• [buildbot] Revert "docker: master/worker: fix issue with latest stable sqlalchemy"   LEDE Commits
• [buildbot] Bump to latest Buildbot release 3.0.2   LEDE Commits
• [buildbot] buildmaster: add some OpenWrt branding   LEDE Commits
• [openwrt/openwrt] malta: support kernel 5.10   LEDE Commits
• [openwrt/openwrt] malta: update kernel 5.10 configs   LEDE Commits
• [openwrt/openwrt] malta: prune subtarget configs   LEDE Commits
• [openwrt/openwrt] ath79: fix RS-485 on Teltonika RUT-955   LEDE Commits
• [openwrt/openwrt] scripts/mkits.sh: add support for adding DT overlay blobs to image   LEDE Commits
• [openwrt/openwrt] include/image*: add support for device-tree overlays   LEDE Commits
• [openwrt/openwrt] mediatek: bpi-r64: use dt-overlay to select SATA or PCIE1   LEDE Commits
• [openwrt/openwrt] uboot-mediatek: bpi-r64: make use of FIT configuration selection   LEDE Commits
• [openwrt/openwrt] bcm4908: add bcm_sf2 fixes for the 5th GPHY   LEDE Commits
• [openwrt/openwrt] bcm4908: backport Ethernet driver fixes from the 5.12   LEDE Commits
• [openwrt/openwrt] kernel: add the latest mtd patch extending ofpart parser   LEDE Commits
• [openwrt/openwrt] bcm63xx-cfe: update to the latest master   LEDE Commits
• [openwrt/openwrt] bcm63xx-cfe: update to the latest master   LEDE Commits
• [openwrt/openwrt] bcm4908: prepare to support TP-Link Archer C2300 V1   LEDE Commits
• [openwrt/openwrt] kernel: move mtd ofpart accepted patch   LEDE Commits
• [openwrt/openwrt] kernel: add pending mtd patches adding NVMEM support   LEDE Commits
• [openwrt/openwrt] bcm4908: use accepted 5.13 DTS patches   LEDE Commits
• [openwrt/openwrt] bcm4908: backport first PHY 5.13 patches   LEDE Commits
• [openwrt/openwrt] bcm4908: backport recent bcm4908_enet changes   LEDE Commits
• [openwrt/openwrt] bcm4908: backport recent bcm_sf2 changes   LEDE Commits
• [openwrt/openwrt] uboot-mediatek: fix default environment of bpi-r64 emmc   LEDE Commits
• [openwrt/openwrt] mediatek: Fix writing U-Boot env on Buffalo WSR-2533DHP2   LEDE Commits
• [openwrt/openwrt] bcm53xx: group dts backports by upstream kernel version   LEDE Commits
• [openwrt/openwrt] bcm53xx: backport more upstream dts stuff from kernel 5.11   LEDE Commits
• [openwrt/openwrt] bcm53xx: backport NVMEM NVRAM driver   LEDE Commits
• [openwrt/openwrt] kernel: backport Broadcom NVRAM driver cleanups   LEDE Commits
• [openwrt/openwrt] bcm53xx: initialize NVRAM from NVMEM driver   LEDE Commits
• [openwrt/openwrt] bcm47xx: make WGT634U NVRAM patch apply again   LEDE Commits
• [openwrt/openwrt] bcm53xx: backport first 5.13 DTS changes   LEDE Commits
• [openwrt/openwrt] ramips: fix broken UniFi 6 Lite image   LEDE Commits
• [openwrt/openwrt] mediatek: fix broken UniFi 6 LR image   LEDE Commits
• [openwrt/openwrt] uboot-mediatek: don't rely in 'lzma' cmdline   LEDE Commits
• [openwrt/openwrt] mt76: update to the latest version   LEDE Commits
• [openwrt/openwrt] build: use -nostdinc and -isystem in NOSTDINC_FLAGS for out-of-tree kernel modules   LEDE Commits
• [openwrt/openwrt] lantiq: set maximum kernel size for ARV7519RW22   LEDE Commits
• [openwrt/openwrt] ppp: compile fix: unset FILTER variable in Makefile   LEDE Commits
• [openwrt/openwrt] kernel: move some disabled symbols to generic   LEDE Commits
• [openwrt/openwrt] tools/sparse: update to version 0.6.3   LEDE Commits
• [openwrt/openwrt] ramips: improve GPIO pin control for HC5x61   LEDE Commits
• [openwrt/openwrt] rampis: use lzma-loader for ZTE MF283+   LEDE Commits
• [openwrt/openwrt] busybox: udhcpc, allow zero length dhcp options   LEDE Commits
• [openwrt/openwrt] x86/64: Iptables seems to lack support for cgroup v2   LEDE Commits
• [openwrt/openwrt] mac80211: rtl: update RTL8821AE PHY/RF parameters   LEDE Commits
• [openwrt/openwrt] ramips: move spi-nor-add-gd25q512 patch to generic   LEDE Commits
• [openwrt/openwrt] binutils: fix compilation with ccache   LEDE Commits
• [openwrt/openwrt] kexec-tools: update to 2.0.21   LEDE Commits
• [openwrt/openwrt] bmips: backport upstream dsa b53 is63xx patch   LEDE Commits
• [openwrt/openwrt] bmips: backport b53 legacy tags support   LEDE Commits
• [openwrt/openwrt] bmips: backport b53 mmap device tree support   LEDE Commits
• [openwrt/openwrt] build: package-ipkg: avoid calling wildcard twice   LEDE Commits
• [openwrt/openwrt] build: call ipkg-remove using xargs if #args>=512   LEDE Commits
• [openwrt/openwrt] build: reduce number of files passed to ipk-remove   LEDE Commits
• [openwrt/openwrt] fstools: update to git HEAD   LEDE Commits
• [openwrt/openwrt] ipq806x: work-around vendor 'rootfs_data' GPT partition   LEDE Commits
• [openwrt/openwrt] kernel: 5.10: update kmod-usb-net-smsc95xx   LEDE Commits
• [openwrt/openwrt] kernel: 5.10: add missing dependency in kmod-mdio-devres   LEDE Commits
• [openwrt/openwrt] kernel: add kmod-ledtrig-audio   LEDE Commits
• [openwrt/openwrt] kernel: 5.10: update sound modules   LEDE Commits
• [openwrt/openwrt] kernel: add missing config symbols, fix typos   LEDE Commits
• [openwrt/openwrt] iproute2: add missing limits.h includes   LEDE Commits
• [openwrt/openwrt] kernel/modules: relocate teql hotplug from iproute2 to kmod-sched   LEDE Commits
• [openwrt/openwrt] iproute2: separate tc into tiny and full variants   LEDE Commits
• [openwrt/openwrt] mvebu: mamba resize kernel to 4MB   LEDE Commits
• [openwrt/openwrt] mvebu: venom resize kernel to 6MB   LEDE Commits
• [openwrt/openwrt] mvebu: enable WRT1900AC v1 and WRT32X for buildbots   LEDE Commits
• [openwrt/openwrt] package/exfat: remove   LEDE Commits
• [openwrt/openwrt] kernel: add exfat again   LEDE Commits
• [openwrt/openwrt] archs38: Add CONFIG_HZ=100   LEDE Commits
• [openwrt/openwrt] glibc: update to latest 2.33 commit (BZ #27462, BZ #27318, BZ #27389)   LEDE Commits
• [openwrt/openwrt] archs38: Add CONFIG_HZ=100   LEDE Commits
• [openwrt/openwrt] kernel: Reorder kernel configuration options   LEDE Commits
• [openwrt/openwrt] kernel: Add missing kernel config options   LEDE Commits
• [openwrt/openwrt] ucode: introduce package   LEDE Commits
• [openwrt/openwrt] firewall4: introduce package   LEDE Commits
• [buildbot] phase1, phase2: fix reconfig command by creating twistd.pid   LEDE Commits
• [openwrt/openwrt] procd: update to git HEAD   LEDE Commits
• [openwrt/openwrt] umdns: add syscalls needed on Aarch64   LEDE Commits
• [openwrt/openwrt] libnfnetlink: quote $(FPIC) on command line   LEDE Commits
• [openwrt/openwrt] scripts: bundle-libraries.sh: fix broken SDK compiler   LEDE Commits
• [openwrt/openwrt] glibc: update to latest 2.33 commit   LEDE Commits
• [openwrt/openwrt] kernel: robustify dependencies in kmod-sound-hda-core   LEDE Commits
• [openwrt/openwrt] build,json: fix duplicates in default_packages   LEDE Commits
• [openwrt/openwrt] bcm27xx: bcm2711: correctly disable HW_RANDOM_BCM2835   LEDE Commits
• [openwrt/openwrt] glibc: update to latest 2.33 commit   LEDE Commits
• [openwrt/openwrt] mbedtls: update to 2.16.10   LEDE Commits
• [openwrt/openwrt] procd: update to git HEAD   LEDE Commits
• [openwrt/openwrt] mediatek: linksys-e8450: remove left-overs from dtsi   LEDE Commits
• [openwrt/openwrt] uhttpd: Reload config after uhttpd-mod-ubus was added   LEDE Commits
• [openwrt/openwrt] uhttpd: Execute uci commit and reload_config once   LEDE Commits
• [openwrt/openwrt] uhttpd: update to git HEAD   LEDE Commits
• [openwrt/openwrt] ramips: increase SPI frequency for HIWIFI HC5x61 devices   LEDE Commits
• [openwrt/openwrt] ramips: increase SPI frequency for Phicomm series devices   LEDE Commits
• [openwrt/openwrt] ramips: create shared DTSI for MT7620 Phicomm K2x series devices   LEDE Commits
• [openwrt/openwrt] base-files: add logging for configuration import   LEDE Commits
• [openwrt/openwrt] ramips: add support for ELECOM WRC-1750GST2   LEDE Commits
• [openwrt/openwrt] igmpproxy: remove package   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.4 to 5.4.106   LEDE Commits
• [openwrt/openwrt] ath79: fix lan port display order for sitecom wlr-7100   LEDE Commits
• [openwrt/openwrt] uhttpd: Reload config after uhttpd-mod-ubus was added   LEDE Commits
• [openwrt/openwrt] uhttpd: Execute uci commit and reload_config once   LEDE Commits
• [openwrt/openwrt] uhttpd: update to git HEAD   LEDE Commits
• [openwrt/openwrt] bcm27xx: bcm2711: correctly disable HW_RANDOM_BCM2835   LEDE Commits
• [openwrt/openwrt] bcm4908: add MTD support for repartitioning   LEDE Commits
• [openwrt/openwrt] bcm4908: backport DTS patch with Ethernet TX IRQ   LEDE Commits
• [openwrt/openwrt] bcm4908: backport the latest bcm_sf2 commits   LEDE Commits
• [openwrt/openwrt] packages: kernel: add gpio-nxp-74hc153   LEDE Commits
• [openwrt/openwrt] ath79: cfi: cmdset_0002: amd chip 0x2201 - write words   LEDE Commits
• [openwrt/openwrt] ath79: Add support for Buffalo WZR-HP-G300NH   LEDE Commits
• [openwrt/openwrt] ath79: copy cfi patch from 5.4 over to 5.10   LEDE Commits
• [openwrt/openwrt] ramips: speed up spi frequency for Youku YK-L1   LEDE Commits
• [openwrt/openwrt] realtek: add ZYXEL_VERS to DEVICE_VARS   LEDE Commits
• [openwrt/openwrt] mvebu: add LED support for GL.iNet GL-MV1000   LEDE Commits
• [openwrt/openwrt] ath79: fix lan port display order for sitecom wlr-7100   LEDE Commits
• [openwrt/openwrt] ramips: add support for ELECOM WRC-1750GST2   LEDE Commits
• [openwrt/openwrt] base-files: add logging for configuration import   LEDE Commits
• [openwrt/openwrt] bmips: add experimental PCI/PCIe support   LEDE Commits
• [openwrt/openwrt] bmips: add B43 SPROM PCI fixups   LEDE Commits
• [openwrt/openwrt] bmips: add ATH9K PCI fixups   LEDE Commits
• [openwrt/openwrt] bmips: add wifi packages for supported devices   LEDE Commits
• [openwrt/openwrt] build,json: fix duplicates in default_packages   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.10 to 5.10.24   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.10 to 5.10.25   LEDE Commits
• [openwrt/openwrt] kernel: drop apu2 reboot patch   LEDE Commits
• [openwrt/openwrt] kernel: backport ehci overcurrent patches   LEDE Commits
• [openwrt/openwrt] bmips: switch to upstream ehci overcurrent flag   LEDE Commits
• [openwrt/openwrt] bmips: reorganize patches   LEDE Commits
• [openwrt/openwrt] ucode: fix PKG_MIRROR_HASH   LEDE Commits
• [openwrt/openwrt] mwlwifi: add PKG_FLAGS:=nonshared   LEDE Commits
• [openwrt/openwrt] build: artifacts: add dependency for built images   LEDE Commits
• [openwrt/openwrt] image: add 'append-image' build command   LEDE Commits
• [openwrt/openwrt] mediatek: generate complete sdcard image for BPi-R64   LEDE Commits
• [openwrt/openwrt] firmware-utils: bcm4908img: name fields & values   LEDE Commits
• [openwrt/openwrt] kernel: create bootfs partition when parsing on BCM4908   LEDE Commits
• [openwrt/openwrt] mwlwifi: add PKG_FLAGS:=nonshared   LEDE Commits
• [openwrt/openwrt] mwlwifi: add PKG_FLAGS:=nonshared   LEDE Commits
• [openwrt/openwrt] firmware-utils: bcm4908kernel: name struct fields   LEDE Commits
• [openwrt/openwrt] image: fix append-image when building multiple profiles   LEDE Commits
• [openwrt/openwrt] build,json: fixup missing arch_packages   LEDE Commits
• [openwrt/openwrt] build: make sure asm gets built with -DPIC   LEDE Commits
• [openwrt/openwrt] build: add GNU install to prerequisites   LEDE Commits
• [openwrt/openwrt] build,json: fixup fixup of arch_packages   LEDE Commits
• [buildbot] phase1, phase2: don't mark the build failed if a non-critical step fails   LEDE Commits
• [buildbot] phase1, phase2: exclude temporary source files from sourceupload step   LEDE Commits
• [buildbot] phase1,phase2: add file space usage reporting   LEDE Commits
• [buildbot] buildmaster: provide OpenWrt version in About section   LEDE Commits
• [buildbot] buildworker: provide OpenWrt version in description   LEDE Commits
• [openwrt/openwrt] build,json: 3rd fixup of default_packages   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.10 to 5.10.26   LEDE Commits
• [openwrt/openwrt] elfutils: enable building with MIPS16   LEDE Commits
• [openwrt/openwrt] openssl: refresh patches   LEDE Commits
• [openwrt/openwrt] Revert "openssl: refresh patches"   LEDE Commits
• [openwrt/openwrt] build,json: backport default_packages fixes   LEDE Commits
• [openwrt/openwrt] README: add install command to build requirements   LEDE Commits
• [openwrt/openwrt] openssl: bump to 1.1.1k   LEDE Commits
• [openwrt/openwrt] x86/base-files: add support for Sophos SG/XG-105   LEDE Commits
• [openwrt/openwrt] mt76: update to the latest version   LEDE Commits
• [openwrt/openwrt] openssl: bump to 1.1.1k   LEDE Commits
• [openwrt/openwrt] packages: kernel: add gpio-nxp-74hc153   LEDE Commits
• [openwrt/openwrt] ath79: cfi: cmdset_0002: amd chip 0x2201 - write words   LEDE Commits
• [openwrt/openwrt] ath79: Add support for Buffalo WZR-HP-G300NH   LEDE Commits
• [openwrt/openwrt] mbedtls: update to 2.16.10   LEDE Commits
• [openwrt/openwrt] openssl: sync package download URLs with master   LEDE Commits
• [openwrt/openwrt] openssl: bump to 1.1.1k   LEDE Commits
• [openwrt/openwrt] kernel: add missing kernel config symbol   LEDE Commits
• [openwrt/openwrt] kernel: Deactivate CONFIG_VFIO in generic kernel config   LEDE Commits
• [openwrt/openwrt] kernel: Move CONFIG_USERIO to generic config   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.4 to 5.4.108   LEDE Commits
• [openwrt/openwrt] kernel: Deactivate CONFIG_VFIO in generic kernel config   LEDE Commits
• [openwrt/openwrt] mvebu: Add button support for GL.iNet GL-MV1000   LEDE Commits
• [openwrt/openwrt] ath79: fix label_mac for NEC Aterm WG1200CR   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.4 to 5.4.108   LEDE Commits
• [openwrt/openwrt] ramips: correct switch config of Youku yk1   LEDE Commits
• [openwrt/openwrt] mvebu: Fix mac addresses for GL.iNet GL-MV1000   LEDE Commits
• [openwrt/openwrt] firewall3: update to latest git HEAD   LEDE Commits
• [openwrt/openwrt] mac80211: merge a few pending tx related fixes   LEDE Commits
• [openwrt/openwrt] kernel: backports: mt7530: fix TRGMII mode after reset   LEDE Commits
• [openwrt/openwrt] kernel: backport 5.13 mtd partitioning changes   LEDE Commits
• [openwrt/openwrt] bcm53xx: fix Linksys EA9500 partitions   LEDE Commits
• [openwrt/openwrt] ucode: update to latest Git HEAD   LEDE Commits
• [openwrt/openwrt] bmips: dgnd3700-v2: fix gpio keys   LEDE Commits
• [openwrt/openwrt] bmips: vr-3032u: fix gpio keys   LEDE Commits
• [openwrt/openwrt] bmips: backport accepted pinctrl patches   LEDE Commits
• [openwrt/openwrt] bmips: dts: align LEDs   LEDE Commits
• [openwrt/openwrt] firewall3: update to latest git HEAD   LEDE Commits
• [openwrt/openwrt] sunxi: enable MUSB in A53 subtarget   LEDE Commits
• [openwrt/openwrt] sunxi: enable wifi module on Pine64 boards   LEDE Commits
• [openwrt/openwrt] mvebu: mamba resize kernel to 4MB   LEDE Commits
• [openwrt/openwrt] mvebu: venom resize kernel to 6MB   LEDE Commits
• [openwrt/openwrt] mvebu: enable WRT1900AC v1 and WRT32X for buildbots   LEDE Commits
• [openwrt/openwrt] mvebu: Add button support for GL.iNet GL-MV1000   LEDE Commits
• [openwrt/openwrt] mvebu: Fix mac addresses for GL.iNet GL-MV1000   LEDE Commits
• [openwrt/openwrt] busybox: udhcpc, allow zero length dhcp options   LEDE Commits
• [openwrt/openwrt] ppp: compile fix: unset FILTER variable in Makefile   LEDE Commits
• [openwrt/openwrt] lantiq: set maximum kernel size for ARV7519RW22   LEDE Commits
• [openwrt/openwrt] ath79: fix RS-485 on Teltonika RUT-955   LEDE Commits
• [openwrt/openwrt] gitignore: add .vscode for VS Code users   LEDE Commits
• [openwrt/openwrt] bpftools: fix libbpf pkgconfig file   LEDE Commits
• [openwrt/openwrt] ipq40xx: net: phy: qca807x: fix GPIO driver   LEDE Commits
• [openwrt/openwrt] libunwind: Add MIPS64 dep check   LEDE Commits
• [openwrt/openwrt] ncurses: split long line of supported terminfo   LEDE Commits
• [openwrt/openwrt] ncurses: add screen-256color terminfo   LEDE Commits
• [openwrt/openwrt] firewall: update to latest git HEAD   LEDE Commits
• [openwrt/openwrt] ramips/mt7621: drop the weak reordering patch   LEDE Commits
• [openwrt/openwrt] ramips/mt7621: drop the timer recalibration patch   LEDE Commits
• [openwrt/openwrt] ramips/mt7621: enable support for cpuidle   LEDE Commits
• [openwrt/openwrt] ramips: mt7620: ralink-i2s: fix modpost error   LEDE Commits
• [openwrt/openwrt] netifd: update to git HEAD   LEDE Commits
• [openwrt/openwrt] bmips: backport pinctrl fixes   LEDE Commits
• [openwrt/openwrt] base-files: functions: introduce new helper functions   LEDE Commits
• [openwrt/openwrt] mediatek: mt7622: improve sysupgrade on MMC   LEDE Commits
• [openwrt/openwrt] bcm4908: backport DT patch adding Ethernet MAC address   LEDE Commits
• [openwrt/openwrt] kernel: fix FIT partition parser compatibility issues   LEDE Commits
• [openwrt/openwrt] uboot-mediatek: adapt root= cmdline arg for bpi-r64   LEDE Commits
• [openwrt/openwrt] ucode: update to latest Git HEAD   LEDE Commits
• [openwrt/openwrt] firewall4: update to latest Git HEAD   LEDE Commits

Last message date: Wed Mar 31 23:37:14 BST 2021
Archived on: Wed Mar 31 23:37:18 BST 2021

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...