[openwrt/openwrt] rampis: use lzma-loader for ZTE MF283+

[LEDE Commits]

hauke pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/410fb05b445c89a147029d1471e184a5594602db

commit 410fb05b445c89a147029d1471e184a5594602db
Author: Lech Perczak <lech.perczak at gmail.com>
AuthorDate: Sun Feb 28 03:24:19 2021 +0100

    rampis: use lzma-loader for ZTE MF283+
    
    Without that, after merging support to master, the device fails to boot
    due to LZMA decompression error:
    
    3: System Boot system code via Flash.
    ## Booting image at bc080000 ...
    raspi_read: from:80000 len:40
    .   Image Name:   MIPS OpenWrt Linux-5.4.99
       Created:      2021-02-25  23:35:00 UTC
       Image Type:   MIPS Linux Kernel Image (lzma compressed)
       Data Size:    1786664 Bytes =  1.7 MB
       Load Address: 80000000
       Entry Point:  80000000
    raspi_read: from:80040 len:1b4328
    ............................   Verifying Checksum ... OK
       Uncompressing Kernel Image ... LZMA ERROR 1 - must RESET board to recover
    
    Use lzma-loader to fix it.
    
    Fixes: 59d065c9f81c ("ramips: add support for ZTE MF283+")
    Signed-off-by: Lech Perczak <lech.perczak at gmail.com>
---
 target/linux/ramips/image/rt305x.mk | 1 +
 1 file changed, 1 insertion(+)

diff --git a/target/linux/ramips/image/rt305x.mk b/target/linux/ramips/image/rt305x.mk
index 30c9b0154a..a3ce013fa2 100644
--- a/target/linux/ramips/image/rt305x.mk
+++ b/target/linux/ramips/image/rt305x.mk
@@ -1184,6 +1184,7 @@ endef
 TARGET_DEVICES += zorlik_zl5900v2
 
 define Device/zte_mf283plus
+  $(Device/uimage-lzma-loader)
   SOC := rt3352
   IMAGE_SIZE := 15872k
   DEVICE_VENDOR := ZTE