[openwrt/openwrt] mediatek: linksys-e8450: remove left-overs from dtsi

[LEDE Commits]

dangole pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/310b7f76e8dad4255efa7510c589b2c3f36af3f5

commit 310b7f76e8dad4255efa7510c589b2c3f36af3f5
Author: Daniel Golle <daniel at makrotopia.org>
AuthorDate: Sun Mar 21 13:32:46 2021 +0000

    mediatek: linksys-e8450: remove left-overs from dtsi
    
    There is an ASMedia ASM1480 PCIe switch found on mt7622-rfb1 and the
    BPi-R64, allowing the user to switch between SATA and PCIe1 which share
    the same pins on the SoC.
    This chip is not present on the Linksys E8450, it doesn't have SATA.
    Remove definitions for GPIO90 from DTSI to prevent it from being
    copy&pasted or otherwise causing confusion.
    
    Signed-off-by: Daniel Golle <daniel at makrotopia.org>
---
 target/linux/mediatek/dts/mt7622-linksys-e8450.dtsi | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/target/linux/mediatek/dts/mt7622-linksys-e8450.dtsi b/target/linux/mediatek/dts/mt7622-linksys-e8450.dtsi
index 23c1d183c8..1e367d408f 100644
--- a/target/linux/mediatek/dts/mt7622-linksys-e8450.dtsi
+++ b/target/linux/mediatek/dts/mt7622-linksys-e8450.dtsi
@@ -210,15 +210,6 @@
 };
 
 &pio {
-	/* Attention: GPIO 90 is used to switch between PCIe at 1,0 and
-	 * SATA functions. i.e. output-high: PCIe, output-low: SATA
-	 */
-//	asm_sel {
-//		gpio-hog;
-//		gpios = <90 GPIO_ACTIVE_HIGH>;
-//		output-high;
-//	};
-
 	eth_pins: eth-pins {
 		mux {
 			function = "eth";