[openwrt/openwrt] kernel: backports: mt7530: fix TRGMII mode after reset
LEDE Commits
lede-commits at lists.infradead.org
Mon Mar 29 07:39:45 BST 2021
981213 pushed a commit to openwrt/openwrt.git, branch openwrt-21.02:
https://git.openwrt.org/2db7fe792e52bc9ebec0e8f1ff771934c6112197
commit 2db7fe792e52bc9ebec0e8f1ff771934c6112197
Author: Ilya Lipnitskiy <ilya.lipnitskiy at gmail.com>
AuthorDate: Mon Mar 15 22:29:55 2021 -0700
kernel: backports: mt7530: fix TRGMII mode after reset
Backport upstream patch that fixes TRGMII mode now that mt7530 is
actually resetting the switch on ramips devices.
Patches apply to both Linux 5.4 and 5.10, since TRGMII is broken on both.
Fixes: 69551a244292 ("ramips: manage low reset lines")
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy at gmail.com>
(cherry picked from commit 680f91d0e5444d58815af03bf41c12592438f9d8)
---
...7530-setup-core-clock-even-in-TRGMII-mode.patch | 84 ++++++++++++++++++++++
.../761-net-dsa-mt7530-Support-EEE-features.patch | 6 +-
2 files changed, 87 insertions(+), 3 deletions(-)
diff --git a/target/linux/generic/backport-5.4/780-net-dsa-mt7530-setup-core-clock-even-in-TRGMII-mode.patch b/target/linux/generic/backport-5.4/780-net-dsa-mt7530-setup-core-clock-even-in-TRGMII-mode.patch
new file mode 100644
index 0000000000..d48d797294
--- /dev/null
+++ b/target/linux/generic/backport-5.4/780-net-dsa-mt7530-setup-core-clock-even-in-TRGMII-mode.patch
@@ -0,0 +1,84 @@
+From c3b8e07909dbe67b0d580416c1a5257643a73be7 Mon Sep 17 00:00:00 2001
+From: Ilya Lipnitskiy <ilya.lipnitskiy at gmail.com>
+Date: Fri, 12 Mar 2021 00:07:03 -0800
+Subject: [PATCH] net: dsa: mt7530: setup core clock even in TRGMII mode
+
+A recent change to MIPS ralink reset logic made it so mt7530 actually
+resets the switch on platforms such as mt7621 (where bit 2 is the reset
+line for the switch). That exposed an issue where the switch would not
+function properly in TRGMII mode after a reset.
+
+Reconfigure core clock in TRGMII mode to fix the issue.
+
+Tested on Ubiquiti ER-X (MT7621) with TRGMII mode enabled.
+
+Fixes: 3f9ef7785a9c ("MIPS: ralink: manage low reset lines")
+Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy at gmail.com>
+Signed-off-by: David S. Miller <davem at davemloft.net>
+---
+ drivers/net/dsa/mt7530.c | 52 +++++++++++++++++++---------------------
+ 1 file changed, 25 insertions(+), 27 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -427,34 +427,32 @@ mt7530_pad_clk_setup(struct dsa_switch *
+ TD_DM_DRVP(8) | TD_DM_DRVN(8));
+
+ /* Setup core clock for MT7530 */
+- if (!trgint) {
+- /* Disable MT7530 core clock */
+- core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
+-
+- /* Disable PLL, since phy_device has not yet been created
+- * provided for phy_[read,write]_mmd_indirect is called, we
+- * provide our own core_write_mmd_indirect to complete this
+- * function.
+- */
+- core_write_mmd_indirect(priv,
+- CORE_GSWPLL_GRP1,
+- MDIO_MMD_VEND2,
+- 0);
+-
+- /* Set core clock into 500Mhz */
+- core_write(priv, CORE_GSWPLL_GRP2,
+- RG_GSWPLL_POSDIV_500M(1) |
+- RG_GSWPLL_FBKDIV_500M(25));
+-
+- /* Enable PLL */
+- core_write(priv, CORE_GSWPLL_GRP1,
+- RG_GSWPLL_EN_PRE |
+- RG_GSWPLL_POSDIV_200M(2) |
+- RG_GSWPLL_FBKDIV_200M(32));
+-
+- /* Enable MT7530 core clock */
+- core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
+- }
++ /* Disable MT7530 core clock */
++ core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
++
++ /* Disable PLL, since phy_device has not yet been created
++ * provided for phy_[read,write]_mmd_indirect is called, we
++ * provide our own core_write_mmd_indirect to complete this
++ * function.
++ */
++ core_write_mmd_indirect(priv,
++ CORE_GSWPLL_GRP1,
++ MDIO_MMD_VEND2,
++ 0);
++
++ /* Set core clock into 500Mhz */
++ core_write(priv, CORE_GSWPLL_GRP2,
++ RG_GSWPLL_POSDIV_500M(1) |
++ RG_GSWPLL_FBKDIV_500M(25));
++
++ /* Enable PLL */
++ core_write(priv, CORE_GSWPLL_GRP1,
++ RG_GSWPLL_EN_PRE |
++ RG_GSWPLL_POSDIV_200M(2) |
++ RG_GSWPLL_FBKDIV_200M(32));
++
++ /* Enable MT7530 core clock */
++ core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
+
+ /* Setup the MT7530 TRGMII Tx Clock */
+ core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
diff --git a/target/linux/generic/pending-5.4/761-net-dsa-mt7530-Support-EEE-features.patch b/target/linux/generic/pending-5.4/761-net-dsa-mt7530-Support-EEE-features.patch
index 1822647ff1..b9ca691f6f 100644
--- a/target/linux/generic/pending-5.4/761-net-dsa-mt7530-Support-EEE-features.patch
+++ b/target/linux/generic/pending-5.4/761-net-dsa-mt7530-Support-EEE-features.patch
@@ -9,7 +9,7 @@ Content-Transfer-Encoding: 8bit
Signed-off-by: René van Dorst <opensource at vdorst.com>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
-@@ -1419,9 +1419,13 @@ static void mt7530_phylink_mac_config(st
+@@ -1417,9 +1417,13 @@ static void mt7530_phylink_mac_config(st
switch (state->speed) {
case SPEED_1000:
mcr_new |= PMCR_FORCE_SPEED_1000;
@@ -23,7 +23,7 @@ Signed-off-by: René van Dorst <opensource at vdorst.com>
break;
}
if (state->duplex == DUPLEX_FULL) {
-@@ -1557,6 +1561,54 @@ mt7530_phylink_mac_link_state(struct dsa
+@@ -1555,6 +1559,54 @@ mt7530_phylink_mac_link_state(struct dsa
return 1;
}
@@ -78,7 +78,7 @@ Signed-off-by: René van Dorst <opensource at vdorst.com>
static const struct dsa_switch_ops mt7530_switch_ops = {
.get_tag_protocol = mtk_get_tag_protocol,
.setup = mt7530_setup,
-@@ -1584,6 +1636,8 @@ static const struct dsa_switch_ops mt753
+@@ -1582,6 +1634,8 @@ static const struct dsa_switch_ops mt753
.phylink_mac_config = mt7530_phylink_mac_config,
.phylink_mac_link_down = mt7530_phylink_mac_link_down,
.phylink_mac_link_up = mt7530_phylink_mac_link_up,
More information about the lede-commits
mailing list