August 2021 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Sun Aug 1 03:56:31 PDT 2021
Ending: Tue Aug 31 15:20:50 PDT 2021
Messages: 251

• [keyring] gpg: update OpwnWrt 19.07 signing key   LEDE Commits
• [openwrt/openwrt] 6in4: delete tunnel on interface teardown   LEDE Commits
• [openwrt/openwrt] archs38: Do not activate ext3 driver options   LEDE Commits
• [openwrt/openwrt] at91bootstrap: Fix compile with binutils 2.36   LEDE Commits
• [openwrt/openwrt] ath79: add support for Atheros DB120 reference board   LEDE Commits
• [openwrt/openwrt] ath79: add support for Compex WPJ558 (16M)   LEDE Commits
• [openwrt/openwrt] ath79: add support for GL.iNet GL-X300B   LEDE Commits
• [openwrt/openwrt] ath79: add support for onion omega   LEDE Commits
• [openwrt/openwrt] ath79: add support for onion omega   LEDE Commits
• [openwrt/openwrt] ath79: add support for Ubiquiti PowerBeam M2 (XW)   LEDE Commits
• [openwrt/openwrt] ath79: convert remaining mtd-mac-address cases to nvmem   LEDE Commits
• [openwrt/openwrt] ath79: fix spelling of DEVICE_MODEL for D-Link DAP-2695   LEDE Commits
• [openwrt/openwrt] ath79: fix the AR7{1,2}00 USB PHY patches   LEDE Commits
• [openwrt/openwrt] ath79: kernel: Add missing quote to drivers/mfd/Kconfig   LEDE Commits
• [openwrt/openwrt] ath79: remove obsolete pci-ath9k-fixup.[c, h] files   LEDE Commits
• [openwrt/openwrt] ath79: remove redundant BLOCKSIZE of 64k from devices   LEDE Commits
• [openwrt/openwrt] ath79: remove redundant nvmem definitions   LEDE Commits
• [openwrt/openwrt] ath79: rename Ubiquiti PowerBeam M (XW) to PowerBeam M5 (XW)   LEDE Commits
• [openwrt/openwrt] ath9k: owl-loader: remove obsolete AR71XX patch   LEDE Commits
• [openwrt/openwrt] base-files: add generic sdcard upgrade method   LEDE Commits
• [openwrt/openwrt] base-files: add option to make /var persistent   LEDE Commits
• [openwrt/openwrt] base-files: fix option to make /var persistent   LEDE Commits
• [openwrt/openwrt] base-files: rename 'sdcard' to 'legacy-sdcard'   LEDE Commits
• [openwrt/openwrt] base-files: sysupgrade stage2: fix losetup detection   LEDE Commits
• [openwrt/openwrt] base-files: upgrade: try umount lvm and loop devices   LEDE Commits
• [openwrt/openwrt] bcm27xx-gpu-fw: update to latest version   LEDE Commits
• [openwrt/openwrt] bcm27xx-userland: factor out a -dev package   LEDE Commits
• [openwrt/openwrt] bcm27xx-userland: factor out a -dev package   LEDE Commits
• [openwrt/openwrt] bcm27xx-userland: update to latest version   LEDE Commits
• [openwrt/openwrt] bcm27xx-userland: update to latest version   LEDE Commits
• [openwrt/openwrt] bcm27xx: switch to kernel 5.10   LEDE Commits
• [openwrt/openwrt] bcm4908: add missing config symbol   LEDE Commits
• [openwrt/openwrt] bcm53xx: backport missed DT patch cleaning up CRU block   LEDE Commits
• [openwrt/openwrt] bcm53xx: backport the latest upstream DT changes   LEDE Commits
• [openwrt/openwrt] bcm53xx: fix kmod-i2c-bcm-iproc for kernel 5.10   LEDE Commits
• [openwrt/openwrt] bcm53xx: fix USB in kernel 5.10   LEDE Commits
• [openwrt/openwrt] bcm53xx: switch to the kernel 5.10   LEDE Commits
• [openwrt/openwrt] bmips: backport accepted watchdog patch   LEDE Commits
• [openwrt/openwrt] busybox: fix compilation with GCC 10   LEDE Commits
• [openwrt/openwrt] dnsmasq: add ignore hosts dir to dnsmasq init script   LEDE Commits
• [openwrt/openwrt] dnsmasq: fix more dnsmasq jail issues   LEDE Commits
• [openwrt/openwrt] dnsmasq: fix more dnsmasq jail issues   LEDE Commits
• [openwrt/openwrt] dnsmasq: reset EXTRA_MOUNT in the right place   LEDE Commits
• [openwrt/openwrt] dnsmasq: reset EXTRA_MOUNT in the right place   LEDE Commits
• [openwrt/openwrt] dnsmasq: rework jail mounts   LEDE Commits
• [openwrt/openwrt] dnsmasq: use local option for local domain parameter   LEDE Commits
• [openwrt/openwrt] dropbear: allow to use with xinetd   LEDE Commits
• [openwrt/openwrt] elfutils: update to 0.182   LEDE Commits
• [openwrt/openwrt] ethtool: fix recursive dependency   LEDE Commits
• [openwrt/openwrt] ethtool: introduce ethtool-full build variant   LEDE Commits
• [openwrt/openwrt] ethtool: update to v5.13   LEDE Commits
• [openwrt/openwrt] firewall: update to git HEAD   LEDE Commits
• [openwrt/openwrt] firmware-utils: add GPL 2.0 SPDX to files with no license info   LEDE Commits
• [openwrt/openwrt] firmware-utils: add support for ZyXEL ZLD firmware   LEDE Commits
• [openwrt/openwrt] firmware-utils: fix build on not Linux   LEDE Commits
• [openwrt/openwrt] firmware-utils: mkmerakifw-old: Add le32 support   LEDE Commits
• [openwrt/openwrt] firmware-utils: mkmerakifw-old: replace GPL-2.0-only boilerplate with SPDX   LEDE Commits
• [openwrt/openwrt] firmware-utils: mkmylofw: replace GPL-2.0-or-later boilerplate with SPDX   LEDE Commits
• [openwrt/openwrt] firmware-utils: nand_ecc: replace GPL boilerplate with SPDX   LEDE Commits
• [openwrt/openwrt] firmware-utils: osbridge-crc: replace GPL-2.0-only boilerplate with SPDX   LEDE Commits
• [openwrt/openwrt] firmware-utils: replace GPL 2.0+ boilerplate/reference with SPDX   LEDE Commits
• [openwrt/openwrt] firmware-utils: replace GPL 2.0 boilerplate/reference with SPDX   LEDE Commits
• [openwrt/openwrt] firmware-utils: seama: replace BSD-3-Clause boilerplate with SPDX   LEDE Commits
• [openwrt/openwrt] firmware-utils: tplink-safeloader: replace BSD-2-Clause boilerplate with SPDX   LEDE Commits
• [openwrt/openwrt] firmware-utils: trx: replace GPL-2.0-or-later boilerplate with SPDX   LEDE Commits
• [openwrt/openwrt] fritz-tools: fix returning wrong values due to strncmp usage   LEDE Commits
• [openwrt/openwrt] fritz-tools: fix returning wrong values due to strncmp usage   LEDE Commits
• [openwrt/openwrt] fstools: update to git HEAD   LEDE Commits
• [openwrt/openwrt] fstools: update to git HEAD   LEDE Commits
• [openwrt/openwrt] fstools: update to git HEAD   LEDE Commits
• [openwrt/openwrt] fstools: update to git HEAD   LEDE Commits
• [openwrt/openwrt] gdb: update to 10.2   LEDE Commits
• [openwrt/openwrt] gemini: Add hdparm setting   LEDE Commits
• [openwrt/openwrt] generic: add missing 5.10 config symbols   LEDE Commits
• [openwrt/openwrt] generic: add missing config symbol   LEDE Commits
• [openwrt/openwrt] generic: add missing Kconfig symbol ARM_SCMI_PROTOCOL   LEDE Commits
• [openwrt/openwrt] generic: enable netlink ethtool interface   LEDE Commits
• [openwrt/openwrt] generic: fix debloat dma-buf 5.10 patch   LEDE Commits
• [openwrt/openwrt] generic: fix kernel panic on existing mac-address node   LEDE Commits
• [openwrt/openwrt] generic: fix to few arguments to of_get_mac_address   LEDE Commits
• [openwrt/openwrt] generic: Kconfig: exit on unset symbol   LEDE Commits
• [openwrt/openwrt] gettext-full: disable parallel compilation   LEDE Commits
• [openwrt/openwrt] gpio-button-hotplug: convert to gpio descriptor (gpiod_) API   LEDE Commits
• [openwrt/openwrt] hostapd: enable ht40 in wpa_supplicant when using wider HE modes   LEDE Commits
• [openwrt/openwrt] hostapd: enable proxy-arp support for hostapd-full   LEDE Commits
• [openwrt/openwrt] hostapd: fix broken check in radar detection notification   LEDE Commits
• [openwrt/openwrt] hostapd: fix Proxy-ARP with Hotspot 2.0 disabled   LEDE Commits
• [openwrt/openwrt] hostapd: refresh patches   LEDE Commits
• [openwrt/openwrt] hostapd: respect fixed channel BW in HE20 mode   LEDE Commits
• [openwrt/openwrt] image: fix build with SELinux   LEDE Commits
• [openwrt/openwrt] images: squashfs: xattrs should not depend on buld host   LEDE Commits
• [openwrt/openwrt] ipq40xx: ar40xx: reset port status register   LEDE Commits
• [openwrt/openwrt] ipq40xx: ar40xx: use FIELD_GET macro   LEDE Commits
• [openwrt/openwrt] ipq40xx: fix Edgecore ECW5211 boot   LEDE Commits
• [openwrt/openwrt] ipq40xx: fix Edgecore ECW5211 boot   LEDE Commits
• [openwrt/openwrt] ipq40xx: increase EX6150v2 SPI frequency   LEDE Commits
• [openwrt/openwrt] ipq806x: add missing enclosing partitions block for TP-Link C2600   LEDE Commits
• [openwrt/openwrt] ipq806x: Askey RT4230W REV6: fix caldata script   LEDE Commits
• [openwrt/openwrt] ipq806x: Askey RT4230W REV6: use usual writing for pcie part   LEDE Commits
• [openwrt/openwrt] ipq806x: fix min<>target opp-microvolt DTS mixup   LEDE Commits
• [openwrt/openwrt] iproute2: bump to 5.13   LEDE Commits
• [openwrt/openwrt] iw: enable print wpa ie for scan   LEDE Commits
• [openwrt/openwrt] kernel/generic: add CONFIG_KCSAN to the 5.10 kconfig   LEDE Commits
• [openwrt/openwrt] kernel: Apply change to of_get_mac_address() to ks8851 too   LEDE Commits
• [openwrt/openwrt] kernel: backport mdio_find_bus from 5.10.x   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.10 to 5.10.55   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.10 to 5.10.56   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.10 to 5.10.57   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.10 to 5.10.58   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.10 to 5.10.59   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.10 to 5.10.60   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.10 to 5.10.61   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.4 to 5.4.138   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.4 to 5.4.139   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.4 to 5.4.140   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.4 to 5.4.141   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.4 to 5.4.142   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.4 to 5.4.142   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.4 to 5.4.143   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.4 to 5.4.143   LEDE Commits
• [openwrt/openwrt] kernel: bump to 4.14.243   LEDE Commits
• [openwrt/openwrt] kernel: bump to 4.14.244   LEDE Commits
• [openwrt/openwrt] kernel: disable CONFIG_RCU_EXPERT and friends   LEDE Commits
• [openwrt/openwrt] kernel: Do not deactivate staging drivers   LEDE Commits
• [openwrt/openwrt] kernel: fix kernel 5.5 and 5.9 PCI DT regressions   LEDE Commits
• [openwrt/openwrt] kernel: fix warning about unused try_to_force_load   LEDE Commits
• [openwrt/openwrt] kernel: kmod-xfrm-interface requires IPv6   LEDE Commits
• [openwrt/openwrt] kernel: move two symbols to the generic kconfigs   LEDE Commits
• [openwrt/openwrt] kernel: properly handle paging errors in fit partition parser   LEDE Commits
• [openwrt/openwrt] kirkwood: import patch to fix build and refresh patches   LEDE Commits
• [openwrt/openwrt] lantiq: convert mtd-mac-address to nvmem for Fritz!Box 736x   LEDE Commits
• [openwrt/openwrt] layerscape: armv8_64b: do not disable CONFIG_IP_ADVANCED_ROUTER   LEDE Commits
• [openwrt/openwrt] layerscape: Do not activate ext2 and ext3 driver options   LEDE Commits
• [openwrt/openwrt] layerscape: Fix multiple bugs in of_get_mac_address() changes   LEDE Commits
• [openwrt/openwrt] libcap: update to 2.51   LEDE Commits
• [openwrt/openwrt] libjson-c: remove old math patch   LEDE Commits
• [openwrt/openwrt] libnftnl: update to 1.2.0   LEDE Commits
• [openwrt/openwrt] libpcap: add rpcapd as package   LEDE Commits
• [openwrt/openwrt] libpcap: update to 1.10.1   LEDE Commits
• [openwrt/openwrt] libubox: update to the latest version   LEDE Commits
• [openwrt/openwrt] lldpd: bump to 1.0.12   LEDE Commits
• [openwrt/openwrt] ltq-vdsl/ltq-vdsl-app: clean up configure args   LEDE Commits
• [openwrt/openwrt] ltq-vdsl: add missing backslash   LEDE Commits
• [openwrt/openwrt] mac80211: add missing change for encap offload on devices with sw rate control   LEDE Commits
• [openwrt/openwrt] mac80211: fix HT40 mode for 6G band   LEDE Commits
• [openwrt/openwrt] mac80211: refresh patch   LEDE Commits
• [openwrt/openwrt] mbedtls: update to 2.16.11   LEDE Commits
• [openwrt/openwrt] mbedtls: update to 2.16.11   LEDE Commits
• [openwrt/openwrt] mediatek: add a new spi-nand driver for kernel 5.10   LEDE Commits
• [openwrt/openwrt] mediatek: add missing config symbol   LEDE Commits
• [openwrt/openwrt] mediatek: add missing config symbols   LEDE Commits
• [openwrt/openwrt] mediatek: attach bmt to the new snand driver   LEDE Commits
• [openwrt/openwrt] mediatek: bmt: set default bmt oob offset to 0   LEDE Commits
• [openwrt/openwrt] mediatek: change dts to use the new snand driver   LEDE Commits
• [openwrt/openwrt] mediatek: convert mtd-mac-address to nvmem for MT7629 RFB   LEDE Commits
• [openwrt/openwrt] mediatek: enable new spi-nand driver for kernel 5.10   LEDE Commits
• [openwrt/openwrt] mediatek: mt7622: enable HW RNG   LEDE Commits
• [openwrt/openwrt] mediatek: mt7623: backport musb, improve HDMI console   LEDE Commits
• [openwrt/openwrt] mediatek: mt7623: enable clock drivers for Mali-450 and audio   LEDE Commits
• [openwrt/openwrt] mediatek: mt7623: enable more hardware features   LEDE Commits
• [openwrt/openwrt] mediatek: mt7623: replace kconfig symbol for snand driver   LEDE Commits
• [openwrt/openwrt] mediatek: mt7629: build with linux 5.10   LEDE Commits
• [openwrt/openwrt] mediatek: mt7629: manually add missing kconfig   LEDE Commits
• [openwrt/openwrt] mediatek: mtk-snand: check request size against chip info   LEDE Commits
• [openwrt/openwrt] mediatek: remove spi-nand hacks from 5.10   LEDE Commits
• [openwrt/openwrt] mvebu: armada-37xx: add patch to forbid cpufreq for 1.2 GHz   LEDE Commits
• [openwrt/openwrt] mvebu: armada-37xx: add patch to forbid cpufreq for 1.2 GHz   LEDE Commits
• [openwrt/openwrt] mvebu: armada-37xx: add patch to forbid cpufreq for 1.2 GHz   LEDE Commits
• [openwrt/openwrt] mvebu: backport Turris Omnia DTS changes to 5.10   LEDE Commits
• [openwrt/openwrt] mvebu: backport Turris Omnia DTS changes to 5.4   LEDE Commits
• [openwrt/openwrt] mvebu: switch to generic sdcard upgrade method   LEDE Commits
• [openwrt/openwrt] mvebu: Turris Omnia: use SFP module, if present   LEDE Commits
• [openwrt/openwrt] nat46: fix translation of ICMP protocols parameter problem and unreachable   LEDE Commits
• [openwrt/openwrt] netifd: update to the latest version   LEDE Commits
• [openwrt/openwrt] nettle: update to 3.7.3   LEDE Commits
• [openwrt/openwrt] odhcpd: update to latest git HEAD   LEDE Commits
• [openwrt/openwrt] omap: Remove EXT2 and EXT3 driver config   LEDE Commits
• [openwrt/openwrt] openssl: bump to 1.1.1l   LEDE Commits
• [openwrt/openwrt] openssl: bump to 1.1.1l   LEDE Commits
• [openwrt/openwrt] openssl: bump to 1.1.1l   LEDE Commits
• [openwrt/openwrt] openssl: use --cross-compile-prefix in Configure   LEDE Commits
• [openwrt/openwrt] OpenWrt v19.07.8: adjust config defaults   LEDE Commits
• [openwrt/openwrt] OpenWrt v19.07.8: revert to branch defaults   LEDE Commits
• [openwrt/openwrt] OpenWrt v21.02.0-rc4: adjust config defaults   LEDE Commits
• [openwrt/openwrt] OpenWrt v21.02.0-rc4: revert to branch defaults   LEDE Commits
• [openwrt/openwrt] pcre: update to 8.45   LEDE Commits
• [openwrt/openwrt] prereq-build: require python3-distutils   LEDE Commits
• [openwrt/openwrt] prereq-build: require python3-distutils   LEDE Commits
• [openwrt/openwrt] procd: add missing dependency and fix empty mount triggers   LEDE Commits
• [openwrt/openwrt] procd: change procd_add_start_mount_trigger to do restart   LEDE Commits
• [openwrt/openwrt] procd: fix issue mounting overlay fs   LEDE Commits
• [openwrt/openwrt] procd: update to git HEAD   LEDE Commits
• [openwrt/openwrt] procd: update to git HEAD   LEDE Commits
• [openwrt/openwrt] procd: update to git HEAD   LEDE Commits
• [openwrt/openwrt] procd: update to git HEAD   LEDE Commits
• [openwrt/openwrt] procd: update to git HEAD   LEDE Commits
• [openwrt/openwrt] procd: update to git HEAD   LEDE Commits
• [openwrt/openwrt] procd: update to git HEAD   LEDE Commits
• [openwrt/openwrt] procd: update to git HEAD and add new script helpers   LEDE Commits
• [openwrt/openwrt] ramips: add label-mac for TL-MR3020 v3   LEDE Commits
• [openwrt/openwrt] ramips: add label MAC address for Onion Omega 2(+)   LEDE Commits
• [openwrt/openwrt] ramips: add missing label-mac-device for Xiaomi Mi Router 4A (100M)   LEDE Commits
• [openwrt/openwrt] ramips: add new flash layout support to Phicomm K2   LEDE Commits
• [openwrt/openwrt] ramips: add support for D-Link DAP-1325-A1   LEDE Commits
• [openwrt/openwrt] ramips: add support for DomyWifi DM202/DM203/DW22D   LEDE Commits
• [openwrt/openwrt] ramips: add support for Motorola MWR03   LEDE Commits
• [openwrt/openwrt] ramips: add WPS button for newifi d1   LEDE Commits
• [openwrt/openwrt] ramips: convert most mtd-mac-address cases in DTSI to nvmem   LEDE Commits
• [openwrt/openwrt] ramips: convert mtd-mac-address to nvmem for D-Link DIR-8xx   LEDE Commits
• [openwrt/openwrt] ramips: convert mtd-mac-address to nvmem for UniElec devices   LEDE Commits
• [openwrt/openwrt] ramips: enable fast-read for TL-MR3020 v3   LEDE Commits
• [openwrt/openwrt] ramips: expose ephy leds for miwifi-mini   LEDE Commits
• [openwrt/openwrt] ramips: fix ethernet MAC address on Omega2   LEDE Commits
• [openwrt/openwrt] ramips: fix indent in DTS for GL.iNet VIXMINI/microuter-N300   LEDE Commits
• [openwrt/openwrt] ramips: fix input type for TL-MR3020 v3   LEDE Commits
• [openwrt/openwrt] ramips: increase flash freq for miwifi-mini   LEDE Commits
• [openwrt/openwrt] ramips: increase SPI frequency for TL-MR3020 v3   LEDE Commits
• [openwrt/openwrt] ramips: lock u-boot partition and unlock u-boot-env for miwifi-mini   LEDE Commits
• [openwrt/openwrt] ramips: minew g1-c: use default static address for lan instead of dhcp   LEDE Commits
• [openwrt/openwrt] ramips: mt7620: move Phicomm MAC address setup to DTSI   LEDE Commits
• [openwrt/openwrt] ramips: mt7628: move mtd-eeprom out of root DTSI   LEDE Commits
• [openwrt/openwrt] ramips: provide default BLOCKSIZE for Device/seama   LEDE Commits
• [openwrt/openwrt] ramips: remove redundant nvmem definitions   LEDE Commits
• [openwrt/openwrt] ramips: w2914ns-v2: consolidate leds nodes into dtsi   LEDE Commits
• [openwrt/openwrt] realtek: fix syntax error introduced by previous commit   LEDE Commits
• [openwrt/openwrt] Revert "mvebu: 5.10 fix DVFS caused random boot crashes"   LEDE Commits
• [openwrt/openwrt] Revert "mvebu: 5.4 fix DVFS caused random boot crashes"   LEDE Commits
• [openwrt/openwrt] Revert "mvebu: 5.4 fix DVFS caused random boot crashes"   LEDE Commits
• [openwrt/openwrt] rockchip: add missing Kconfig symbols   LEDE Commits
• [openwrt/openwrt] scripts/target-metadata.pl: order features alphabetically   LEDE Commits
• [openwrt/openwrt] selinux-policy: update to version 0.9   LEDE Commits
• [openwrt/openwrt] tegra: add missing Kconfig symbol   LEDE Commits
• [openwrt/openwrt] toolchain/binutils: switch to version 2.36.1 by default   LEDE Commits
• [openwrt/openwrt] toolchain/gcc: bump gcc 11 to 11.2   LEDE Commits
• [openwrt/openwrt] toolchain/gcc: switch to version 10 by default   LEDE Commits
• [openwrt/openwrt] treewide: add various missing config symbols   LEDE Commits
• [openwrt/openwrt] treewide: backport support for nvmem on non platform devices   LEDE Commits
• [openwrt/openwrt] uboot-at91: fix dtc compilation on host gcc 10   LEDE Commits
• [openwrt/openwrt] uboot-at91: fix dtc compilation on host gcc 10   LEDE Commits
• [openwrt/openwrt] uboot-layerscape: fix dtc compilation on host gcc 10   LEDE Commits
• [openwrt/openwrt] uboot-layerscape: fix dtc compilation on host gcc 10   LEDE Commits
• [openwrt/openwrt] uboot-mediatek: pass console=tty1 for BPi-R2   LEDE Commits
• [openwrt/openwrt] uboot-rockchip: update to v2021.07   LEDE Commits
• [openwrt/openwrt] ubox: update to git HEAD   LEDE Commits
• [openwrt/openwrt] uhttpd: add config option for json_script   LEDE Commits
• [openwrt/openwrt] umbim: bump to git HEAD   LEDE Commits
• [openwrt/openwrt] ustp: add OpenWrt STP/RSTP daemon   LEDE Commits
• [openwrt/openwrt] util-linux: update to 2.37   LEDE Commits
• [openwrt/openwrt] wireguard-tools: bump to 20210424   LEDE Commits
• [openwrt/openwrt] wolfssl: fix build with GCC 10 on 32 x86 targets   LEDE Commits
• [openwrt/openwrt] x86: kernel: set NR_CPUS to 512   LEDE Commits

Last message date: Tue Aug 31 15:20:50 PDT 2021
Archived on: Tue Aug 31 15:20:59 PDT 2021

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...