[openwrt/openwrt] ltq-vdsl/ltq-vdsl-app: clean up configure args

[LEDE Commits]

hauke pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/9754b6ba6f32e634934d99cdd4129041f9297d1a

commit 9754b6ba6f32e634934d99cdd4129041f9297d1a
Author: Jan Hoffmann <jan at 3e8.eu>
AuthorDate: Thu Aug 19 18:51:45 2021 +0200

    ltq-vdsl/ltq-vdsl-app: clean up configure args
    
    The userspace application now uses the model=full option to match the
    configuration of the kernel module. The source no longer contains SOAP
    support, which was the primary reason to build only typical instead
    of full before.
    
    This makes several CLI commands, which were already supported in the
    kernel module, available in the userspace application. For example, this
    includes bbsg which allows to get information about VDSL2 bands.
    
    Some previously applied build options were redundant. Disabling ADSL MIB
    support is unnecessary, as it only applies to Danube. ADSL LED support
    is no longer included in the source. ReTx counters are already included
    with model type full.
    
    This increases the size of the userspace application by approximately
    15 kB (uncompressed). The kernel module does not change at all.
    
    Signed-off-by: Jan Hoffmann <jan at 3e8.eu>
---
 package/kernel/lantiq/ltq-vdsl/Makefile      | 13 +++++--------
 package/network/config/ltq-vdsl-app/Makefile | 13 +++++--------
 2 files changed, 10 insertions(+), 16 deletions(-)

diff --git a/package/kernel/lantiq/ltq-vdsl/Makefile b/package/kernel/lantiq/ltq-vdsl/Makefile
index 229e2b577c..f45895ba33 100644
--- a/package/kernel/lantiq/ltq-vdsl/Makefile
+++ b/package/kernel/lantiq/ltq-vdsl/Makefile
@@ -9,7 +9,7 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=ltq-vdsl-vr9
 PKG_VERSION:=4.17.18.6
-PKG_RELEASE:=4
+PKG_RELEASE:=5
 
 PKG_BASE_NAME:=drv_dsl_cpe_api
 PKG_SOURCE:=$(PKG_BASE_NAME)_vrx-$(PKG_VERSION).tar.gz
@@ -55,17 +55,14 @@ CONFIGURE_ARGS += --enable-kernel-include="$(LINUX_DIR)/include" \
 	--enable-ifxos-include="-I$(STAGING_DIR)/usr/include/ifxos" \
 	--enable-driver-include="-I$(STAGING_DIR)/usr/include/vdsl" \
 	--enable-add-drv-cflags="-DMODULE -DINCLUDE_DSL_ATM_PTM_INTERFACE_SUPPORT" \
-	--enable-adsl-led=no \
-	--enable-adsl-mib=no \
-	--enable-dsl-ceoc=no \
 	--enable-linux-26 \
 	--enable-kernelbuild="$(LINUX_DIR)" \
-	--enable-debug-prints=no \
-	--enable-dsl-pm-retx-counters \
-	--enable-dsl-pm-retx-thresholds \
+	--enable-debug-prints=no
 	ARCH=mips
 
-CONFIGURE_ARGS += --enable-model=full
+CONFIGURE_ARGS += \
+	--enable-model=full \
+	--enable-dsl-ceoc=no
 #CONFIGURE_ARGS += --enable-model=lite
 #CONFIGURE_ARGS += --enable-model=footprint
 #CONFIGURE_ARGS += --enable-model=typical
diff --git a/package/network/config/ltq-vdsl-app/Makefile b/package/network/config/ltq-vdsl-app/Makefile
index 0823a0e7e9..6ea103de8d 100644
--- a/package/network/config/ltq-vdsl-app/Makefile
+++ b/package/network/config/ltq-vdsl-app/Makefile
@@ -9,7 +9,7 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=ltq-vdsl-app
 PKG_VERSION:=4.17.18.6
-PKG_RELEASE:=8
+PKG_RELEASE:=9
 PKG_BASE_NAME:=dsl_cpe_control
 PKG_SOURCE:=$(PKG_BASE_NAME)_vrx-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=@OPENWRT
@@ -61,15 +61,12 @@ CONFIGURE_ARGS += \
 	--disable-dti \
 	--with-channels-per-line="1"
 
-#CONFIGURE_ARGS += --enable-model=full
+CONFIGURE_ARGS += \
+	--enable-model=full \
+	--enable-dsl-ceoc=no
 #CONFIGURE_ARGS += --enable-model=lite
 #CONFIGURE_ARGS += --enable-model=footprint
-CONFIGURE_ARGS += \
-	--enable-model=typical \
-	--enable-dsl-pm-showtime \
-	--disable-dsl-ceoc \
-	--enable-dsl-pm-retx-counters \
-	--enable-dsl-pm-retx-thresholds
+#CONFIGURE_ARGS += --enable-model=typical
 #CONFIGURE_ARGS += --enable-model=debug
 
 define Package/ltq-vdsl-app/install