[openwrt/openwrt] ipq806x: fix min<>target opp-microvolt DTS mixup

LEDE Commits lede-commits at lists.infradead.org
Sat Aug 21 16:55:39 PDT 2021


adrian pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/9baca410644b3f0fe94e2d5b6558c9c4bf61e712

commit 9baca410644b3f0fe94e2d5b6558c9c4bf61e712
Author: Shane Synan <digitalcircuit36939 at gmail.com>
AuthorDate: Thu Aug 19 14:22:48 2021 -0400

    ipq806x: fix min<>target opp-microvolt DTS mixup
    
    Rearrange all voltage triplets for "opp_table0" to match the
    specifications.  "opp-microvolt" and "opp-microvolt-<name>" triplets
    are in order of <target min max>, and NOT <min target max>.
    
    Previously, the CPU would *always* spend its time at the "minimum"
    voltage, ignoring the actual intended target.  This is a regression
    from previous behavior.
    
    On an NBG6817 with a Qualcomm CPU of PVS bin #2...
    (see &opp_table0 -> opp-1725000000 -> opp-microvolt-speed0-pvs2-v0)
    
    * Before:
    /usr/bin/tail -n +1 /sys/kernel/debug/opp/cpu0/opp\:1725000000/supply-0/u_volt_*
    ==> /sys/kernel/debug/opp/cpu0/opp:1725000000/supply-0/u_volt_max <==
    1260000
    
    ==> /sys/kernel/debug/opp/cpu0/opp:1725000000/supply-0/u_volt_min <==
    1200000
    
    ==> /sys/kernel/debug/opp/cpu0/opp:1725000000/supply-0/u_volt_target <==
    1140000
    
    * After:
    /usr/bin/tail -n +1 /sys/kernel/debug/opp/cpu0/opp\:1725000000/supply-0/u_volt_*
    ==> /sys/kernel/debug/opp/cpu0/opp:1725000000/supply-0/u_volt_max <==
    1260000
    
    ==> /sys/kernel/debug/opp/cpu0/opp:1725000000/supply-0/u_volt_min <==
    1140000
    
    ==> /sys/kernel/debug/opp/cpu0/opp:1725000000/supply-0/u_volt_target <==
    1200000
    
    To check voltages and frequencies at run time, use...
    /bin/cat /sys/kernel/debug/regulator/regulator_summary &&
      /bin/cat /sys/kernel/debug/clk/clk_summary | grep "hfpll"
    
    See
    https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/Documentation/devicetree/bindings/opp/opp.txt?h=v5.4.142#n91
    
    Fixes: 1e25423be8ac ("ipq806x: refresh dtsi patches")
    
    Signed-off-by: Shane Synan <digitalcircuit36939 at gmail.com>
    Reviewed-by: Ansuel Smith <ansuelsmth at gmail.com>
    [commit message style cleanup, another kernel refresh]
    Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
---
 .../files/arch/arm/boot/dts/qcom-ipq8062.dtsi      | 35 +++++----
 .../files/arch/arm/boot/dts/qcom-ipq8065.dtsi      | 87 +++++++++++-----------
 .../patches-5.10/083-ipq8064-dtsi-additions.patch  | 71 +++++++++---------
 ...03-ARM-dts-qcom-reduce-pci-IO-size-to-64K.patch |  6 +-
 .../ipq806x/patches-5.10/851-add-gsbi1-dts.patch   |  2 +-
 5 files changed, 105 insertions(+), 96 deletions(-)

diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8062.dtsi b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8062.dtsi
index 4b007130aa..f1681f4c02 100644
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8062.dtsi
+++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8062.dtsi
@@ -45,32 +45,35 @@
 	/delete-node/opp-1200000000;
 	/delete-node/opp-1400000000;
 
+	/*
+	 * Voltage thresholds are <target min max>
+	 */
 	opp-384000000 {
-		opp-microvolt-speed0-pvs0-v0 = <902500 950000 997500>;
-		opp-microvolt-speed0-pvs1-v0 = <855000 900000 945000>;
-		opp-microvolt-speed0-pvs2-v0 = <807500 850000 892500>;
-		opp-microvolt-speed0-pvs3-v0 = <760000 800000 840000>;
+		opp-microvolt-speed0-pvs0-v0 = <950000 902500 997500>;
+		opp-microvolt-speed0-pvs1-v0 = <900000 855000 945000>;
+		opp-microvolt-speed0-pvs2-v0 = <850000 807500 892500>;
+		opp-microvolt-speed0-pvs3-v0 = <800000 760000 840000>;
 	};
 
 	opp-600000000 {
-		opp-microvolt-speed0-pvs0-v0 = <950000 1000000 1050000>;
-		opp-microvolt-speed0-pvs1-v0 = <945000  950000  955000>;
-		opp-microvolt-speed0-pvs2-v0 = <895000  900000  905000>;
-		opp-microvolt-speed0-pvs3-v0 = <845000  850000  855000>;
+		opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>;
+		opp-microvolt-speed0-pvs1-v0 = <950000  945000  955000>;
+		opp-microvolt-speed0-pvs2-v0 = <900000  895000  905000>;
+		opp-microvolt-speed0-pvs3-v0 = <850000  845000  855000>;
 	};
 
 	opp-800000000 {
-		opp-microvolt-speed0-pvs0-v0 = <997500 1050000 1102500>;
-		opp-microvolt-speed0-pvs1-v0 = < 995000 1000000 1005000>;
-		opp-microvolt-speed0-pvs2-v0 = < 945000  950000  955000>;
-		opp-microvolt-speed0-pvs3-v0 = < 895000  900000  905000>;
+		opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>;
+		opp-microvolt-speed0-pvs1-v0 = <1000000 995000 1005000>;
+		opp-microvolt-speed0-pvs2-v0 = <950000  945000  955000>;
+		opp-microvolt-speed0-pvs3-v0 = <900000  895000  905000>;
 	};
 
 	opp-1000000000 {
-		opp-microvolt-speed0-pvs0-v0 = <1045000 1100000 1155000>;
-		opp-microvolt-speed0-pvs1-v0 = <997500 1050000 1102500>;
-		opp-microvolt-speed0-pvs2-v0 = < 995000 1000000 1005000>;
-		opp-microvolt-speed0-pvs3-v0 = < 945000  950000  955000>;
+		opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>;
+		opp-microvolt-speed0-pvs1-v0 = <1050000  997500 1102500>;
+		opp-microvolt-speed0-pvs2-v0 = <1000000  995000 1005000>;
+		opp-microvolt-speed0-pvs3-v0 = <950000   945000  955000>;
 	};
 };
 
diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi
index a0312686a0..c70a5cbaed 100644
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi
+++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi
@@ -97,66 +97,69 @@
 
 	/delete-node/opp-1200000000;
 
+	/*
+	 * Voltage thresholds are <target min max>
+	 */
 	opp-384000000 {
-		opp-microvolt-speed0-pvs0-v0 = <926250 975000 1023750>;
-		opp-microvolt-speed0-pvs1-v0 = <902500 950000 997500>;
-		opp-microvolt-speed0-pvs2-v0 = <878750 925000 971250>;
-		opp-microvolt-speed0-pvs3-v0 = <855000 900000 945000>;
-		opp-microvolt-speed0-pvs4-v0 = <831250 875000 918750>;
-		opp-microvolt-speed0-pvs5-v0 = <783750 825000 866250>;
-		opp-microvolt-speed0-pvs6-v0 = <736250 775000 813750>;
+		opp-microvolt-speed0-pvs0-v0 = <975000 926250 1023750>;
+		opp-microvolt-speed0-pvs1-v0 = <950000 902500 997500>;
+		opp-microvolt-speed0-pvs2-v0 = <925000 878750 971250>;
+		opp-microvolt-speed0-pvs3-v0 = <900000 855000 945000>;
+		opp-microvolt-speed0-pvs4-v0 = <875000 831250 918750>;
+		opp-microvolt-speed0-pvs5-v0 = <825000 783750 866250>;
+		opp-microvolt-speed0-pvs6-v0 = <775000 736250 813750>;
 	};
 
 	opp-600000000 {
-		opp-microvolt-speed0-pvs0-v0 = <950000 1000000 1050000>;
-		opp-microvolt-speed0-pvs1-v0 = <926250 975000 1023750>;
-		opp-microvolt-speed0-pvs2-v0 = <902500 950000 997500>;
-		opp-microvolt-speed0-pvs3-v0 = <878750 925000 971250>;
-		opp-microvolt-speed0-pvs4-v0 = <855000 900000 945000>;
-		opp-microvolt-speed0-pvs5-v0 = <807500 850000 892500>;
-		opp-microvolt-speed0-pvs6-v0 = <760000 800000 840000>;
+		opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>;
+		opp-microvolt-speed0-pvs1-v0 = <975000 926250 1023750>;
+		opp-microvolt-speed0-pvs2-v0 = <950000 902500 997500>;
+		opp-microvolt-speed0-pvs3-v0 = <925000 878750 971250>;
+		opp-microvolt-speed0-pvs4-v0 = <900000 855000 945000>;
+		opp-microvolt-speed0-pvs5-v0 = <850000 807500 892500>;
+		opp-microvolt-speed0-pvs6-v0 = <800000 760000 840000>;
 	};
 
 	opp-800000000 {
-		opp-microvolt-speed0-pvs0-v0 = <997500 1050000 1102500>;
-		opp-microvolt-speed0-pvs1-v0 = <973750 1025000 1076250>;
-		opp-microvolt-speed0-pvs2-v0 = <950000 1000000 1050000>;
-		opp-microvolt-speed0-pvs3-v0 = <926250 975000 1023750>;
-		opp-microvolt-speed0-pvs4-v0 = <902500 950000 997500>;
-		opp-microvolt-speed0-pvs5-v0 = <855000 900000 945000>;
-		opp-microvolt-speed0-pvs6-v0 = <807500 850000 892500>;
+		opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>;
+		opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>;
+		opp-microvolt-speed0-pvs2-v0 = <1000000 950000 1050000>;
+		opp-microvolt-speed0-pvs3-v0 = <975000 926250 1023750>;
+		opp-microvolt-speed0-pvs4-v0 = <950000 902500 997500>;
+		opp-microvolt-speed0-pvs5-v0 = <900000 855000 945000>;
+		opp-microvolt-speed0-pvs6-v0 = <850000 807500 892500>;
 	};
 
 	opp-1000000000 {
-		opp-microvolt-speed0-pvs0-v0 = <1045000 1100000 1155000>;
-		opp-microvolt-speed0-pvs1-v0 = <1021250 1075000 1128750>;
-		opp-microvolt-speed0-pvs2-v0 = <997500 1050000 1102500>;
-		opp-microvolt-speed0-pvs3-v0 = <973750 1025000 1076250>;
-		opp-microvolt-speed0-pvs4-v0 = <950000 1000000 1050000>;
-		opp-microvolt-speed0-pvs5-v0 = <902500 950000 997500>;
-		opp-microvolt-speed0-pvs6-v0 = <855000 900000 945000>;
+		opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>;
+		opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>;
+		opp-microvolt-speed0-pvs2-v0 = <1050000 997500 1102500>;
+		opp-microvolt-speed0-pvs3-v0 = <1025000 973750 1076250>;
+		opp-microvolt-speed0-pvs4-v0 = <1000000 950000 1050000>;
+		opp-microvolt-speed0-pvs5-v0 = <950000 902500 997500>;
+		opp-microvolt-speed0-pvs6-v0 = <900000 855000 945000>;
 	};
 
 	opp-1400000000 {
-		opp-microvolt-speed0-pvs0-v0 = <1116250 1175000 1233750>;
-		opp-microvolt-speed0-pvs1-v0 = <1092500 1150000 1207500>;
-		opp-microvolt-speed0-pvs2-v0 = <1068750 1125000 1181250>;
-		opp-microvolt-speed0-pvs3-v0 = <1045000 1100000 1155000>;
-		opp-microvolt-speed0-pvs4-v0 = <1021250 1075000 1128750>;
-		opp-microvolt-speed0-pvs5-v0 = <973750 1025000 1076250>;
-		opp-microvolt-speed0-pvs6-v0 = <926250 975000 1023750>;
+		opp-microvolt-speed0-pvs0-v0 = <1175000 1116250 1233750>;
+		opp-microvolt-speed0-pvs1-v0 = <1150000 1092500 1207500>;
+		opp-microvolt-speed0-pvs2-v0 = <1125000 1068750 1181250>;
+		opp-microvolt-speed0-pvs3-v0 = <1100000 1045000 1155000>;
+		opp-microvolt-speed0-pvs4-v0 = <1075000 1021250 1128750>;
+		opp-microvolt-speed0-pvs5-v0 = <1025000 973750 1076250>;
+		opp-microvolt-speed0-pvs6-v0 = <975000 926250 1023750>;
 		opp-level = <1>;
 	};
 
 	opp-1725000000 {
 		opp-hz = /bits/ 64 <1725000000>;
-		opp-microvolt-speed0-pvs0-v0 = <1199375 1262500 1325625>;
-		opp-microvolt-speed0-pvs1-v0 = <1163750 1225000 1286250>;
-		opp-microvolt-speed0-pvs2-v0 = <1140000 1200000 1260000>;
-		opp-microvolt-speed0-pvs3-v0 = <1116250 1175000 1233750>;
-		opp-microvolt-speed0-pvs4-v0 = <1092500 1150000 1207500>;
-		opp-microvolt-speed0-pvs5-v0 = <1045000 1100000 1155000>;
-		opp-microvolt-speed0-pvs6-v0 = <997500 1050000 1102500>;
+		opp-microvolt-speed0-pvs0-v0 = <1262500 1199375 1325625>;
+		opp-microvolt-speed0-pvs1-v0 = <1225000 1163750 1286250>;
+		opp-microvolt-speed0-pvs2-v0 = <1200000 1140000 1260000>;
+		opp-microvolt-speed0-pvs3-v0 = <1175000 1116250 1233750>;
+		opp-microvolt-speed0-pvs4-v0 = <1150000 1092500 1207500>;
+		opp-microvolt-speed0-pvs5-v0 = <1100000 1045000 1155000>;
+		opp-microvolt-speed0-pvs6-v0 = <1050000 997500 1102500>;
 		opp-supported-hw = <0x1>;
 		clock-latency-ns = <100000>;
 		opp-level = <2>;
diff --git a/target/linux/ipq806x/patches-5.10/083-ipq8064-dtsi-additions.patch b/target/linux/ipq806x/patches-5.10/083-ipq8064-dtsi-additions.patch
index fac8b174d4..1ebce10600 100644
--- a/target/linux/ipq806x/patches-5.10/083-ipq8064-dtsi-additions.patch
+++ b/target/linux/ipq806x/patches-5.10/083-ipq8064-dtsi-additions.patch
@@ -26,7 +26,7 @@
  		};
  
  		cpu1: cpu at 1 {
-@@ -38,14 +50,347 @@
+@@ -38,14 +50,350 @@
  			next-level-cache = <&L2>;
  			qcom,acc = <&acc1>;
  			qcom,saw = <&saw1>;
@@ -85,12 +85,15 @@
 +		compatible = "operating-points-v2-kryo-cpu";
 +		nvmem-cells = <&speedbin_efuse>;
 +
++		/*
++		 * Voltage thresholds are <target min max>
++		 */
 +		opp-384000000 {
 +			opp-hz = /bits/ 64 <384000000>;
-+			opp-microvolt-speed0-pvs0-v0 = <950000 1000000 1050000>;
-+			opp-microvolt-speed0-pvs1-v0 = <878750 925000 971250>;
-+			opp-microvolt-speed0-pvs2-v0 = <831250 875000 918750>;
-+			opp-microvolt-speed0-pvs3-v0 = <760000 800000 840000>;
++			opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>;
++			opp-microvolt-speed0-pvs1-v0 = <925000 878750 971250>;
++			opp-microvolt-speed0-pvs2-v0 = <875000 831250 918750>;
++			opp-microvolt-speed0-pvs3-v0 = <800000 760000 840000>;
 +			opp-supported-hw = <0x1>;
 +			clock-latency-ns = <100000>;
 +			opp-level = <0>;
@@ -98,10 +101,10 @@
 +
 +		opp-600000000 {
 +			opp-hz = /bits/ 64 <600000000>;
-+			opp-microvolt-speed0-pvs0-v0 = <997500 1050000 1102500>;
-+			opp-microvolt-speed0-pvs1-v0 = <926250 975000 1023750>;
-+			opp-microvolt-speed0-pvs2-v0 = <878750 925000 971250>;
-+			opp-microvolt-speed0-pvs3-v0 = <807500 850000 892500>;
++			opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>;
++			opp-microvolt-speed0-pvs1-v0 = <975000 926250 1023750>;
++			opp-microvolt-speed0-pvs2-v0 = <925000 878750 971250>;
++			opp-microvolt-speed0-pvs3-v0 = <850000 807500 892500>;
 +			opp-supported-hw = <0x1>;
 +			clock-latency-ns = <100000>;
 +			opp-level = <1>;
@@ -109,10 +112,10 @@
 +
 +		opp-800000000 {
 +			opp-hz = /bits/ 64 <800000000>;
-+			opp-microvolt-speed0-pvs0-v0 = <1045000 1100000 1155000>;
-+			opp-microvolt-speed0-pvs1-v0 = <973750 1025000 1076250>;
-+			opp-microvolt-speed0-pvs2-v0 = <945250 995000 1044750>;
-+			opp-microvolt-speed0-pvs3-v0 = <855000 900000 945000>;
++			opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>;
++			opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>;
++			opp-microvolt-speed0-pvs2-v0 = <995000 945250 1044750>;
++			opp-microvolt-speed0-pvs3-v0 = <900000 855000 945000>;
 +			opp-supported-hw = <0x1>;
 +			clock-latency-ns = <100000>;
 +			opp-level = <1>;
@@ -120,10 +123,10 @@
 +
 +		opp-1000000000 {
 +			opp-hz = /bits/ 64 <1000000000>;
-+			opp-microvolt-speed0-pvs0-v0 = <1092500 1150000 1207500>;
-+			opp-microvolt-speed0-pvs1-v0 = <1021250 1075000 1128750>;
-+			opp-microvolt-speed0-pvs2-v0 = <973750 1025000 1076250>;
-+			opp-microvolt-speed0-pvs3-v0 = <902500 950000 997500>;
++			opp-microvolt-speed0-pvs0-v0 = <1150000 1092500 1207500>;
++			opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>;
++			opp-microvolt-speed0-pvs2-v0 = <1025000 973750 1076250>;
++			opp-microvolt-speed0-pvs3-v0 = <950000 902500 997500>;
 +			opp-supported-hw = <0x1>;
 +			clock-latency-ns = <100000>;
 +			opp-level = <1>;
@@ -131,10 +134,10 @@
 +
 +		opp-1200000000 {
 +			opp-hz = /bits/ 64 <1200000000>;
-+			opp-microvolt-speed0-pvs0-v0 = <1140000 1200000 1260000>;
-+			opp-microvolt-speed0-pvs1-v0 = <1068750 1125000 1181250>;
-+			opp-microvolt-speed0-pvs2-v0 = <1021250 1075000 1128750>;
-+			opp-microvolt-speed0-pvs3-v0 = <950000 1000000 1050000>;
++			opp-microvolt-speed0-pvs0-v0 = <1200000 1140000 1260000>;
++			opp-microvolt-speed0-pvs1-v0 = <1125000 1068750 1181250>;
++			opp-microvolt-speed0-pvs2-v0 = <1075000 1021250 1128750>;
++			opp-microvolt-speed0-pvs3-v0 = <1000000 950000 1050000>;
 +			opp-supported-hw = <0x1>;
 +			clock-latency-ns = <100000>;
 +			opp-level = <2>;
@@ -142,10 +145,10 @@
 +
 +		opp-1400000000 {
 +			opp-hz = /bits/ 64 <1400000000>;
-+			opp-microvolt-speed0-pvs0-v0 = <1187500 1250000 1312500>;
-+			opp-microvolt-speed0-pvs1-v0 = <1116250 1175000 1233750>;
-+			opp-microvolt-speed0-pvs2-v0 = <1068750 1125000 1181250>;
-+			opp-microvolt-speed0-pvs3-v0 = <997500 1050000 1102500>;
++			opp-microvolt-speed0-pvs0-v0 = <1250000 1187500 1312500>;
++			opp-microvolt-speed0-pvs1-v0 = <1175000 1116250 1233750>;
++			opp-microvolt-speed0-pvs2-v0 = <1125000 1068750 1181250>;
++			opp-microvolt-speed0-pvs3-v0 = <1050000 997500 1102500>;
 +			opp-supported-hw = <0x1>;
 +			clock-latency-ns = <100000>;
 +			opp-level = <2>;
@@ -377,7 +380,7 @@
  	memory {
  		device_type = "memory";
  		reg = <0x0 0x0>;
-@@ -93,6 +438,15 @@
+@@ -93,6 +441,15 @@
  		};
  	};
  
@@ -393,7 +396,7 @@
  	firmware {
  		scm {
  			compatible = "qcom,scm-ipq806x", "qcom,scm";
-@@ -120,6 +474,78 @@
+@@ -120,6 +477,78 @@
  			reg-names = "lpass-lpaif";
  		};
  
@@ -472,7 +475,7 @@
  		qcom_pinmux: pinmux at 800000 {
  			compatible = "qcom,ipq8064-pinctrl";
  			reg = <0x800000 0x4000>;
-@@ -160,6 +586,15 @@
+@@ -160,6 +589,15 @@
  				};
  			};
  
@@ -488,7 +491,7 @@
  			spi_pins: spi_pins {
  				mux {
  					pins = "gpio18", "gpio19", "gpio21";
-@@ -169,6 +604,53 @@
+@@ -169,6 +607,53 @@
  				};
  			};
  
@@ -542,7 +545,7 @@
  			leds_pins: leds_pins {
  				mux {
  					pins = "gpio7", "gpio8", "gpio9",
-@@ -231,6 +713,17 @@
+@@ -231,6 +716,17 @@
  			clock-output-names = "acpu1_aux";
  		};
  
@@ -560,7 +563,7 @@
  		saw0: regulator at 2089000 {
  			compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
  			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
-@@ -243,6 +736,17 @@
+@@ -243,6 +739,17 @@
  			regulator;
  		};
  
@@ -578,7 +581,7 @@
  		gsbi2: gsbi at 12480000 {
  			compatible = "qcom,gsbi-v1.0.0";
  			cell-index = <2>;
-@@ -478,6 +982,95 @@
+@@ -478,6 +985,95 @@
  			#reset-cells = <1>;
  		};
  
@@ -674,7 +677,7 @@
  		pcie0: pci at 1b500000 {
  			compatible = "qcom,pcie-ipq8064";
  			reg = <0x1b500000 0x1000
-@@ -739,6 +1332,59 @@
+@@ -739,6 +1335,59 @@
  			status = "disabled";
  		};
  
@@ -734,7 +737,7 @@
  		vsdcc_fixed: vsdcc-regulator {
  			compatible = "regulator-fixed";
  			regulator-name = "SDCC Power";
-@@ -814,4 +1460,17 @@
+@@ -814,4 +1463,17 @@
  			};
  		};
  	};
diff --git a/target/linux/ipq806x/patches-5.10/103-ARM-dts-qcom-reduce-pci-IO-size-to-64K.patch b/target/linux/ipq806x/patches-5.10/103-ARM-dts-qcom-reduce-pci-IO-size-to-64K.patch
index 050360ad21..4020d9d2de 100644
--- a/target/linux/ipq806x/patches-5.10/103-ARM-dts-qcom-reduce-pci-IO-size-to-64K.patch
+++ b/target/linux/ipq806x/patches-5.10/103-ARM-dts-qcom-reduce-pci-IO-size-to-64K.patch
@@ -17,7 +17,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth at gmail.com>
 
 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
 +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -1085,7 +1085,7 @@
+@@ -1088,7 +1088,7 @@
  			#address-cells = <3>;
  			#size-cells = <2>;
  
@@ -26,7 +26,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth at gmail.com>
  				  0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
  
  			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-@@ -1136,7 +1136,7 @@
+@@ -1139,7 +1139,7 @@
  			#address-cells = <3>;
  			#size-cells = <2>;
  
@@ -35,7 +35,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth at gmail.com>
  				  0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
  
  			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-@@ -1187,7 +1187,7 @@
+@@ -1190,7 +1190,7 @@
  			#address-cells = <3>;
  			#size-cells = <2>;
  
diff --git a/target/linux/ipq806x/patches-5.10/851-add-gsbi1-dts.patch b/target/linux/ipq806x/patches-5.10/851-add-gsbi1-dts.patch
index 3a83b2de30..e6ee9a93fc 100644
--- a/target/linux/ipq806x/patches-5.10/851-add-gsbi1-dts.patch
+++ b/target/linux/ipq806x/patches-5.10/851-add-gsbi1-dts.patch
@@ -1,6 +1,6 @@
 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
 +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -747,6 +747,41 @@
+@@ -750,6 +750,41 @@
  			reg = <0x12100000 0x10000>;
  		};
  



More information about the lede-commits mailing list