[openwrt/openwrt] ath79: add support for Compex WPJ558 (16M)
LEDE Commits
lede-commits at lists.infradead.org
Tue Aug 24 16:42:42 PDT 2021
adrian pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/e2d08084c30e1f25559bfc1c745c0d0854a75636
commit e2d08084c30e1f25559bfc1c745c0d0854a75636
Author: Romain Mahoux <romain at mahoux.fr>
AuthorDate: Tue Jun 8 11:52:18 2021 +0200
ath79: add support for Compex WPJ558 (16M)
Specifications:
- SoC: QCA9558
- DRAM: 128MB DDR2
- Flash: 16MB SPI-NOR
- Wireless: on-board abgn 2×2 2.4GHz radio
- Ethernet: 2x 10/100/1000 Mbps (1x 802.11af PoE)
- miniPCIe slot
Flash instruction:
- From u-boot
tftpboot 0x80500000 openwrt-ath79-generic-compex_wpj558-16m-squashfs-sysupgrade.bin
erase 0x9f030000 +$filesize
cp.b $fileaddr 0x9f030000 $filesize
boot
- From cpximg loader
The cpximg loader can be started either by holding the reset button
during power up. Once it's running, a TFTP-server under 192.168.1.1 will accept
the image appropriate for the board revision that is etched on the board.
For example, if the board is labelled '6A07':
tftp -v -m binary 192.168.1.1 -c put openwrt-ath79-generic-compex_wpj558-16m-squashfs-cpximg-6a07.bin
Signed-off-by: Romain Mahoux <romain at mahoux.fr>
[convert to nvmem, remove redundant lan_mac in 02_network]
Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
---
.../linux/ath79/dts/qca9558_compex_wpj558-16m.dts | 143 +++++++++++++++++++++
.../generic/base-files/etc/board.d/02_network | 5 +
target/linux/ath79/image/generic.mk | 14 ++
3 files changed, 162 insertions(+)
diff --git a/target/linux/ath79/dts/qca9558_compex_wpj558-16m.dts b/target/linux/ath79/dts/qca9558_compex_wpj558-16m.dts
new file mode 100644
index 0000000000..61597c8909
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_compex_wpj558-16m.dts
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "compex,wpj558-16m", "qca,qca9558";
+ model = "Compex WPJ558 (16MB flash)";
+
+ aliases {
+ label-mac-device = ð0;
+ led-boot = &led_sig4;
+ led-failsafe = &led_sig4;
+ led-running = &led_sig4;
+ led-upgrade = &led_sig4;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ sig1 {
+ label = "red:sig1";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ sig2 {
+ label = "yellow:sig2";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ sig3 {
+ label = "green:sig3";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+
+ led_sig4: sig4 {
+ label = "green:sig4";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ beeper {
+ compatible = "gpio-beeper";
+ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition at 0 {
+ label = "u-boot";
+ reg = <0x000000 0x030000>;
+ read-only;
+ };
+
+ firmware at 30000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x030000 0xfc0000>;
+ };
+
+ art: partition at ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy at 0 {
+ reg = <0>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
+ 0x50 0xcc35cc35 /* LED_CTRL0 */
+ 0x54 0x00000000 /* LED_CTRL1 */
+ 0x58 0x00000000 /* LED_CTRL2 */
+ 0x5c 0x03ffff00 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x0000007e /* PORT6 STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x56000000 0x00000101 0x00001616>;
+ phy-handle = <&phy0>;
+
+ nvmem-cells = <&macaddr_uboot_2e010>;
+ nvmem-cell-names = "mac-address";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&uboot {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_uboot_2e010: macaddr at 2e010 {
+ reg = <0x2e010 0x6>;
+ };
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index d37fa4ba2b..e45d1aa73a 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -221,6 +221,10 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0 at eth0" "3:lan" "2:wan"
;;
+ compex,wpj558-16m)
+ ucidef_add_switch "switch0" \
+ "1:wan" "5:lan" "6 at eth0"
+ ;;
devolo,dlan-pro-1200plus-ac|\
devolo,magic-2-wifi)
ucidef_add_switch "switch0" \
@@ -528,6 +532,7 @@ ath79_setup_macs()
wan_mac=$(macaddr_add $(mtd_get_mac_binary art 0x0) 1)
;;
compex,wpj344-16m|\
+ compex,wpj558-16m|\
compex,wpj563)
wan_mac=$(mtd_get_mac_binary u-boot 0x2e018)
;;
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 4b943ba282..5bcd4779d3 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -682,6 +682,20 @@ define Device/compex_wpj531-16m
endef
TARGET_DEVICES += compex_wpj531-16m
+define Device/compex_wpj558-16m
+ SOC := qca9558
+ IMAGE_SIZE := 16128k
+ DEVICE_VENDOR := Compex
+ DEVICE_MODEL := WPJ558
+ DEVICE_VARIANT := 16M
+ SUPPORTED_DEVICES += wpj558
+ IMAGES += cpximg-6a07.bin
+ IMAGE/cpximg-6a07.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | mkmylofw_16m 0x691 3
+ DEVICE_PACKAGES := kmod-gpio-beeper
+endef
+TARGET_DEVICES += compex_wpj558-16m
+
define Device/compex_wpj563
SOC := qca9563
DEVICE_PACKAGES := kmod-usb2 kmod-usb3
More information about the lede-commits
mailing list