October 2020 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Thu Oct 1 11:52:28 EDT 2020
Ending: Tue Oct 27 19:38:07 EDT 2020
Messages: 146

• [PATCH] DBus: Update dont_quote[] with ignore_broadcast_ssid parameter   yegorslists at googlemail.com
  • [PATCH] DBus: Update dont_quote[] with ignore_broadcast_ssid parameter   Jouni Malinen
• [PATCH] SSID: add the missing ignore_broadcast_ssid parameter   yegorslists at googlemail.com
  • [PATCH] SSID: add the missing ignore_broadcast_ssid parameter   Jouni Malinen
• [PATCH v2] hostapd: Add HE 6 GHz band capability configuration   Rajkumar Manoharan
  • [PATCH v2] hostapd: Add HE 6 GHz band capability configuration   Rajkumar Manoharan
• [PATCH] nl80211: clear VHT and HE MCS rates in legacy beacon tx rate   Rajkumar Manoharan
  • [PATCH] nl80211: clear VHT and HE MCS rates in legacy beacon tx rate   Johannes Berg
    • [PATCH] nl80211: clear VHT and HE MCS rates in legacy beacon tx rate   Rajkumar Manoharan
      • [PATCH] nl80211: clear VHT and HE MCS rates in legacy beacon tx rate   Johannes Berg
• [PATCH 1/2] nl80211: Allow HE MCS rate selection for beacon frame   Rajkumar Manoharan
  • [PATCH 2/2] AP: Extend Spatial Reuse Parameter Set   Rajkumar Manoharan
• [PATCH 1/2] hostapd: dfs: allow switch to available channel   Janusz Dziedzic
  • [PATCH 2/2] tests: hwsim: add dfs_chan_switch_precac   Janusz Dziedzic
  • [PATCH 1/2] hostapd: dfs: allow switch to available channel   Jouni Malinen
    • [PATCH 1/2] hostapd: dfs: allow switch to available channel   Janusz Dziedzic
      • [PATCH 1/2] hostapd: dfs: allow switch to available channel   Jouni Malinen
      • [PATCH 1/2] hostapd: dfs: allow switch to available channel   Janusz Dziedzic
      • [PATCH 1/2] hostapd: dfs: allow switch to available channel   Janusz Dziedzic
• [PATCH] AP: ACS: Primary channel for 5 GHz band is now selected based on interference factor.   Марков Михаил
• Opinions about my setup   Felix Rubio
• [PATCH] Fix: hapd->dpp_auth is unallocated when receiving a DPP Prescence Announcement causing a segmentation fault.   Wystan Schmidt
  • [PATCH] Fix: hapd->dpp_auth is unallocated when receiving a DPP Prescence Announcement causing a segmentation fault.   Wystan Schmidt
• [PATCH] hostapd: Fix error message for radius_accept_attr config option   Pali Rohár
  • [PATCH] hostapd: Fix error message for radius_accept_attr config option   Jouni Malinen
    • [RESEND PATCH] hostapd: Fix error message for radius_accept_attr config option   Pali Rohár
      • [RESEND PATCH] hostapd: Fix error message for radius_accept_attr config option   Jouni Malinen
• WPA-EAP/802.1x AP mode without NL80211_CMD_SET_STATION driver support   Pali Rohár
  • WPA-EAP/802.1x AP mode without NL80211_CMD_SET_STATION driver support   Arend Van Spriel
    • WPA-EAP/802.1x AP mode without NL80211_CMD_SET_STATION driver support   Pali Rohár
      • WPA-EAP/802.1x AP mode without NL80211_CMD_SET_STATION driver support   Arend Van Spriel
      • WPA-EAP/802.1x AP mode without NL80211_CMD_SET_STATION driver support   Pali Rohár
• list of changes to date of wpa-2.10-devel compared to wpa-2.9 release   Jouni Malinen
  • list of changes to date of wpa-2.10-devel compared to wpa-2.9 release   Alan DeKok
• [PATCH] hostapd: Fix crash setting global configurator params on chirp rx   Jouni Malinen
• [PATCH v3 0/3] DPP2: Presence Announcement notification   Jouni Malinen
• [PATCH V4] multiple_bssid: add support   John Crispin
• [PATCH] PEAP peer: allow autheap for EAP-TLS phase2 support   Jouni Malinen
  • [PATCH] PEAP peer: allow autheap for EAP-TLS phase2 support   Alan DeKok
  • [PATCH] PEAP peer: allow autheap for EAP-TLS phase2 support   Alexander Clouter
• [PATCH v2 0/2] EAP-{TTLS,PEAP} support (draft) for TLS 1.3   Jouni Malinen
  • [PATCH v2 0/2] EAP-{TTLS,PEAP} support (draft) for TLS 1.3   Alexander Clouter
• [PATCH V2 0/4] allow reconfiguration of bgscan   Jouni Malinen
• [PATCH] BSD: don't log SIOCG80211 errors during interface setup   Jouni Malinen
• [PATCH] op_classes: Don't report an error when there are none to add   Jouni Malinen
• [PATCH] iface match: unspecified matched interfaces should not log driver fails   Jouni Malinen
• [PATCH] ap: reflect status code in SAE reflection attack   Jouni Malinen
• [PATCH 1/9] tests: remote: sort tests correctly   Jouni Malinen
• [PATCH] supplicant: allow changing an interface bridge via D-Bus   Jouni Malinen
• [PATCH] doc: fix typos   yegorslists at googlemail.com
  • [PATCH] doc: fix typos   Jouni Malinen
• [PATCH v7 00/15] build improvements   Jouni Malinen
  • [PATCH v7 00/15] build improvements   Johannes Berg
    • [PATCH v7 00/15] build improvements   Jouni Malinen
• [PATCH] Fix STA mode default TXOP Limit values for AC_VI and AC_VO   Jouni Malinen
• [PATCH v3 1/5] wpa_supplicant: Track consecutive connection failures   Jouni Malinen
• SAE: Notify WRONG Key when Confirm mismatch   Jouni Malinen
• [PATCH] mesh: set correct address for mesh default broadcast/multicast keys   Jouni Malinen
• [PATCH] wpa_supplicant: do not retry scan if operation is not supported   Jouni Malinen
• [PATCH v2] DBus: Add "Roam" command support   Jouni Malinen
• [PATCH 1/2] tests: Skip busctl tests when not available   Jouni Malinen
• [PATCH 2/2] D-Bus: share 'remove all networks' with CLI   Jouni Malinen
• [PATCH RESEND] p2p: Limit P2P_DEVICE name to appropriate ifname size   Jouni Malinen
• [PATCH] nl80211: unbreak mode processing due to presence of S1G band   Jouni Malinen
• [PATCH v8 1/2] build: use the new build system for fuzz tests   Johannes Berg
  • [PATCH v8 2/2] build: put archive files into build/ folder too   Johannes Berg
  • [PATCH v8 1/2] build: use the new build system for fuzz tests   Jouni Malinen
• [PATCH] wolfSSL TLS layer: Check NULL return from wolfSSL_sk_value   Jouni Malinen
• [PATCH] gitignore: clean up a bit   Johannes Berg
  • [PATCH] gitignore: clean up a bit   Jouni Malinen
• [PATCH] wpaspy: allow building with python3   Johannes Berg
  • [PATCH] wpaspy: allow building with python3   Jouni Malinen
• [PATCH] tests: build.sh: remove 'make clean' steps   Johannes Berg
  • [PATCH] tests: build.sh: remove 'make clean' steps   Jouni Malinen
• [PATCH] mesh: allow channel switch command   Jouni Malinen
• [PATCH] Fix wrong types in tls_wolfssl.c   Jouni Malinen
• [PATCH] tests: build.sh: avoid copying .config if identical   Johannes Berg
  • [PATCH] tests: build.sh: avoid copying .config if identical   Jouni Malinen
• [PATCH] Hostapd does not update WPS credentials on SIGHUP   Jouni Malinen
• [PATCH] More consistent help command in wpa_cli   Jouni Malinen
  • [PATCH] More consistent help command in wpa_cli   akater
• [PATCH] Fixbug : Failure in receive lowest PN setting   Jouni Malinen
• [PATCH] Added DPP_CHIRP commands to hostapd CLI and wpa_supplicant CLI   Jouni Malinen
• [PATCH] p2p: set ap_configured_cb during p2p group reform process   Jouni Malinen
• p2p: fallback to p2p neg after running out of GO scan attempts.   Jouni Malinen
• [PATCH v2 0/2] *_cli: Add dpp_bootstrap_set command   Jouni Malinen
• [PATCH v2 1/2] hostapd: dfs: allow switch to available channel   Janusz Dziedzic
  • [PATCH v2 2/2] tests: hwsim: add dfs_chan_switch_precac   Janusz Dziedzic
• [PATCH] build: fix dependency file inclusion   Johannes Berg
  • [PATCH] build: fix dependency file inclusion   Jouni Malinen
• [PATCH] p2p: pick 5g channel from more possible channels   Jimmy Chen
• [PATCH 1/7] tests: Fix mesh_secure_ocv_mix_legacy false negative by using common finalizer   Jouni Malinen
• [PATCH] build: rebuild libs all the time   Johannes Berg
  • [PATCH] build: rebuild libs all the time   Jouni Malinen
• [PATCH 1/2] build: make a common library build   Johannes Berg
  • [PATCH 2/2] build: make more library things common   Johannes Berg
  • [PATCH 1/2] build: make a common library build   Jouni Malinen
• [PATCH] mesh: Stop SAE auth timer when mesh node is removed   Udhayakumar Mahendiran
  • [PATCH] mesh: Stop SAE auth timer when mesh node is removed   Jouni Malinen
• Question regarding Single hostapd with Dual radio   Koen Vandeputte
• eapol_test with VSA   Munroe Sollog
• [PATCH] tests: HE: add a test for wifi generation on 2.4 GHz   Johannes Berg
  • [PATCH] tests: HE: add a test for wifi generation on 2.4 GHz   Johannes Berg
• [PATCH 1/2] tests: multi_ap pass params_backhaul   Janusz Dziedzic
  • [PATCH 2/2] tests: multi AP extend tests   Janusz Dziedzic
• [PATCH v2] tests: HE: add a test for wifi generation on 2.4 GHz   Johannes Berg
• [PATCH v2] driver_nl80211: report invalid signal and noise when info is unavailable   Otcheretianski, Andrei
  • [PATCH v2] driver_nl80211: report invalid signal and noise when info is unavailable   Matthew Wang
    • [PATCH v2] driver_nl80211: report invalid signal and noise when info is unavailable   Brian Norris
• [PATCH v4 4/7] wpa_supplicant: fix frequency config for non p2p vht/he cases   Jouni Malinen
  • [PATCH v4 4/7] wpa_supplicant: fix frequency config for non p2p vht/he cases   Markus Theil
• [PATCH v4 0/7] Fix and unify wpa_supplicant AP/mesh frequency setup   Jouni Malinen
• [PATCH] wpa_supplicant: fix frequency config for vht/he cases   Markus Theil
  • [PATCH] wpa_supplicant: fix frequency config for vht/he cases   Jouni Malinen
• openssl 1.1.1 with wpa_supplicant   Micka
  • openssl 1.1.1 with wpa_supplicant   Jouni Malinen
• [PATCH] build: lib.rules: add common-clean   Johannes Berg
  • [PATCH] build: lib.rules: add common-clean   Jouni Malinen
• [PATCH] build: wpa_s: put common EAP objs into OBJS   Johannes Berg
• [PATCH] hostapd: fix typos   yegorslists at googlemail.com
  • [PATCH] hostapd: fix typos   Jouni Malinen
• [PATCH] eap_peer: add .gitignore with *.so   Johannes Berg
  • [PATCH] eap_peer: add .gitignore with *.so   Jouni Malinen
• [PATCH v2] PEAP peer: allow autheap for EAP-TLS phase2 support   Alexander Clouter
• [PATCH v3 0/2] EAP-{TTLS,PEAP} support (draft) for TLS 1.3   Alexander Clouter
  • [PATCH v3 1/2] EAP-TTLS/PEAP peer: fix failure when using session tickets under TLS 1.3   Alexander Clouter
  • [PATCH v3 2/2] EAP peer/server: support for draft-ietf-emu-tls-eap-types-00   Alexander Clouter
• I cannot reach the computers on the wireless segment of the lan   Felix Rubio
  • I cannot reach the computers on the wireless segment of the lan   Jan Ceuleers
    • I cannot reach the computers on the wireless segment of the lan   Felix Rubio
      • I cannot reach the computers on the wireless segment of the lan   Jan Ceuleers
      • I cannot reach the computers on the wireless segment of the lan   Felix Rubio
      • I cannot reach the computers on the wireless segment of the lan   Felix Rubio
• [PATCH] wpa_supplicant: fix typos   yegorslists at googlemail.com
  • [PATCH] wpa_supplicant: fix typos   Jouni Malinen
• [PATCH] wpa_cli: Don't access uninitialized variables   Andrei Otcheretianski
  • [PATCH] wpa_supplicant: remove unfeasible conditions in config parsing   Andrei Otcheretianski
  • [PATCH] SAE: Don't use potentially uninitialized keys   Andrei Otcheretianski
  • [PATCH] wpa_cli: Don't access uninitialized variables   Jouni Malinen
• [PATCH] wolfSSL: Client cert loading API fix   Juliusz Sosinowicz
• [PATCH] hw_feature: Correctly select mode in case of 6GHz   Andrei Otcheretianski
• [PATCH] tests: Skip dpp_enterprise_tcp tests without OpenSSL   Andrei Otcheretianski
• [PATCH] wlantest: allow missing RSNE in S1G beacon   Thomas Pedersen
  • [PATCH] wlantest: allow missing RSNE in S1G beacon   Thomas Pedersen
• [RFC AP: ACS: select primary channel for 5G-band based on interference factor   Марков Михаил Александрович
• CTRL-EVENT-ASSOC-REJECT bssid=00:00:00:00:00:00 status_code=16   Miguel Angel Garcia Martin

Last message date: Tue Oct 27 19:38:07 EDT 2020
Archived on: Tue Oct 27 19:38:27 EDT 2020

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...