[PATCH] wpa_supplicant: fix typos

yegorslists at googlemail.com yegorslists at googlemail.com
Sun Oct 18 13:28:23 EDT 2020


From: Yegor Yefremov <yegorslists at googlemail.com>

Signed-off-by: Yegor Yefremov <yegorslists at googlemail.com>
---
 wpa_supplicant/ChangeLog                      | 10 +++++-----
 wpa_supplicant/README                         |  4 ++--
 wpa_supplicant/README-HS20                    |  2 +-
 wpa_supplicant/binder/binder.h                |  2 +-
 wpa_supplicant/config.h                       |  2 +-
 wpa_supplicant/ctrl_iface.c                   |  2 +-
 wpa_supplicant/dbus/dbus_new.c                |  4 ++--
 wpa_supplicant/dbus/dbus_new_handlers.c       |  2 +-
 wpa_supplicant/examples/p2p-action-udhcp.sh   |  4 ++--
 wpa_supplicant/examples/p2p-action.sh         |  4 ++--
 wpa_supplicant/examples/p2p/p2p_connect.py    | 16 ++++++++--------
 wpa_supplicant/examples/p2p/p2p_disconnect.py |  2 +-
 wpa_supplicant/examples/p2p/p2p_find.py       |  2 +-
 wpa_supplicant/examples/p2p/p2p_flush.py      |  2 +-
 wpa_supplicant/examples/p2p/p2p_group_add.py  | 10 +++++-----
 wpa_supplicant/examples/p2p/p2p_invite.py     | 10 +++++-----
 wpa_supplicant/examples/p2p/p2p_listen.py     |  2 +-
 wpa_supplicant/examples/p2p/p2p_stop_find.py  |  2 +-
 wpa_supplicant/examples/udhcpd-p2p.conf       | 10 +++++-----
 wpa_supplicant/interworking.c                 |  2 +-
 wpa_supplicant/sme.c                          |  2 +-
 wpa_supplicant/wmm_ac.c                       |  2 +-
 wpa_supplicant/wpa_supplicant.conf            |  2 +-
 23 files changed, 50 insertions(+), 50 deletions(-)

diff --git a/wpa_supplicant/ChangeLog b/wpa_supplicant/ChangeLog
index f82e5e0ea..a06a93b22 100644
--- a/wpa_supplicant/ChangeLog
+++ b/wpa_supplicant/ChangeLog
@@ -533,7 +533,7 @@ ChangeLog for wpa_supplicant
 	* fixed MSCHAP UTF-8 to UCS-2 conversion for three-byte encoding;
 	  this fixes password with include UTF-8 characters that use
 	  three-byte encoding EAP methods that use NtPasswordHash
-	* fixed couple of sequencies where radio work items could get stuck,
+	* fixed couple of sequences where radio work items could get stuck,
 	  e.g., when rfkill blocking happens during scanning or when
 	  scan-for-auth workaround is used
 	* P2P enhancements/fixes
@@ -627,7 +627,7 @@ ChangeLog for wpa_supplicant
 	* added 'dup_network <id_s> <id_d> <name>' command; this can be used to
 	  clone the psk field without having toextract it from wpa_supplicant
 	* fixed GSM authentication on USIM
-	* added support for usin epoll in eloop (CONFIG_ELOOP_EPOLL=y)
+	* added support for using epoll in eloop (CONFIG_ELOOP_EPOLL=y)
 	* fixed some concurrent virtual interface cases with dedicated P2P
 	  management interface to not catch events from removed interface (this
 	  could result in the management interface getting disabled)
@@ -1113,7 +1113,7 @@ ChangeLog for wpa_supplicant
 	    workarounds.
 	  - Add support for AuthorizedMACs attribute.
 	* TDLS:
-	  - Propogate TDLS related nl80211 capability flags from kernel and
+	  - Propagate TDLS related nl80211 capability flags from kernel and
 	    add them as driver capability flags. If the driver doesn't support
 	    capabilities, assume TDLS is supported internally. When TDLS is
 	    explicitly not supported, disable all user facing TDLS operations.
@@ -2221,7 +2221,7 @@ ChangeLog for wpa_supplicant
 	* added support for EAP-SIM pseudonyms and fast re-authentication
 	* added support for EAP-TLS/PEAP/TTLS fast re-authentication (TLS
 	  session resumption)
-	* added support for EAP-SIM with two challanges
+	* added support for EAP-SIM with two challenges
 	  (phase1="sim_min_num_chal=3" can be used to require three challenges)
 	* added support for configuring DH/DSA parameters for an ephemeral DH
 	  key exchange (EAP-TLS/PEAP/TTLS) using new configuration parameters
@@ -2332,7 +2332,7 @@ ChangeLog for wpa_supplicant
 	  ctrl_interface_group can be used to select which group gets access to
 	  the control interface;
 	  wpa_cli: by default, try to connect to the first interface available
-	  in /var/run/wpa_supplicant; this path can be overriden with -p option
+	  in /var/run/wpa_supplicant; this path can be overridden with -p option
 	  and an interface can be selected with -i option (i.e., in most common
 	  cases, wpa_cli does not need to get any arguments)
 	* added support for LEAP
diff --git a/wpa_supplicant/README b/wpa_supplicant/README
index bbc86b137..391912e9b 100644
--- a/wpa_supplicant/README
+++ b/wpa_supplicant/README
@@ -383,7 +383,7 @@ cp wpa_cli wpa_supplicant /usr/local/bin
 You will need to make a configuration file, e.g.,
 /etc/wpa_supplicant.conf, with network configuration for the networks
 you are going to use. Configuration file section below includes
-explanation fo the configuration file format and includes various
+explanation of the configuration file format and includes various
 examples. Once the configuration is ready, you can test whether the
 configuration work by first running wpa_supplicant with following
 command to start it on foreground with debugging enabled:
@@ -778,7 +778,7 @@ wpa_cli commands
   disconnect = disconnect and wait for reassociate command before connecting
   scan = request new BSS scan
   scan_results = get latest scan results
-  get_capability <eap/pairwise/group/key_mgmt/proto/auth_alg> = get capabilies
+  get_capability <eap/pairwise/group/key_mgmt/proto/auth_alg> = get capabilities
   terminate = terminate wpa_supplicant
   quit = exit wpa_cli
 
diff --git a/wpa_supplicant/README-HS20 b/wpa_supplicant/README-HS20
index 334287101..484e4cbf4 100644
--- a/wpa_supplicant/README-HS20
+++ b/wpa_supplicant/README-HS20
@@ -78,7 +78,7 @@ hs20=1
 
 # Parameters for controlling scanning
 
-# Homogenous ESS identifier
+# Homogeneous ESS identifier
 # If this is set, scans will be used to request response only from BSSes
 # belonging to the specified Homogeneous ESS. This is used only if interworking
 # is enabled.
diff --git a/wpa_supplicant/binder/binder.h b/wpa_supplicant/binder/binder.h
index 019e3275c..6d7abb134 100644
--- a/wpa_supplicant/binder/binder.h
+++ b/wpa_supplicant/binder/binder.h
@@ -17,7 +17,7 @@ extern "C" {
 /**
  * This is the binder RPC interface entry point to the wpa_supplicant core.
  * This initializes the binder driver & BinderManager instance and then forwards
- * all the notifcations from the supplicant core to the BinderManager.
+ * all the notifications from the supplicant core to the BinderManager.
  */
 struct wpas_binder_priv;
 struct wpa_global;
diff --git a/wpa_supplicant/config.h b/wpa_supplicant/config.h
index cd9830939..648573de0 100644
--- a/wpa_supplicant/config.h
+++ b/wpa_supplicant/config.h
@@ -650,7 +650,7 @@ struct wpa_config {
 	 * This variable control whether wpa_supplicant is allow to re-write
 	 * its configuration with wpa_config_write(). If this is zero,
 	 * configuration data is only changed in memory and the external data
-	 * is not overriden. If this is non-zero, wpa_supplicant will update
+	 * is not overridden. If this is non-zero, wpa_supplicant will update
 	 * the configuration data (e.g., a file) whenever configuration is
 	 * changed. This update may replace the old configuration which can
 	 * remove comments from it in case of a text file configuration.
diff --git a/wpa_supplicant/ctrl_iface.c b/wpa_supplicant/ctrl_iface.c
index f5c65870e..56a6aaaad 100644
--- a/wpa_supplicant/ctrl_iface.c
+++ b/wpa_supplicant/ctrl_iface.c
@@ -10278,7 +10278,7 @@ static int wpas_ctrl_iface_mesh_pmksa_add(struct wpa_supplicant *wpa_s,
 					  char *cmd)
 {
 	/*
-	 * We do not check mesh interface existance because PMKSA should be
+	 * We do not check mesh interface existence because PMKSA should be
 	 * stored before wpa_s->ifmsh creation to suppress commit message
 	 * creation.
 	 */
diff --git a/wpa_supplicant/dbus/dbus_new.c b/wpa_supplicant/dbus/dbus_new.c
index 6dcd948ad..2c01943f7 100644
--- a/wpa_supplicant/dbus/dbus_new.c
+++ b/wpa_supplicant/dbus/dbus_new.c
@@ -1824,7 +1824,7 @@ void wpas_dbus_signal_p2p_peer_disconnected(struct wpa_supplicant *wpa_s,
  * @sa: station addr (p2p i/f) of the peer
  * @dialog_token: service discovery request dialog token
  * @update_indic: service discovery request update indicator
- * @tlvs: service discovery request genrated byte array of tlvs
+ * @tlvs: service discovery request generated byte array of tlvs
  * @tlvs_len: service discovery request tlvs length
  */
 void wpas_dbus_signal_p2p_sd_request(struct wpa_supplicant *wpa_s,
@@ -1893,7 +1893,7 @@ void wpas_dbus_signal_p2p_sd_request(struct wpa_supplicant *wpa_s,
  * @wpa_s: %wpa_supplicant network interface data
  * @sa: station addr (p2p i/f) of the peer
  * @update_indic: service discovery request update indicator
- * @tlvs: service discovery request genrated byte array of tlvs
+ * @tlvs: service discovery request generated byte array of tlvs
  * @tlvs_len: service discovery request tlvs length
  */
 void wpas_dbus_signal_p2p_sd_response(struct wpa_supplicant *wpa_s,
diff --git a/wpa_supplicant/dbus/dbus_new_handlers.c b/wpa_supplicant/dbus/dbus_new_handlers.c
index 86f85605a..fa9a1a370 100644
--- a/wpa_supplicant/dbus/dbus_new_handlers.c
+++ b/wpa_supplicant/dbus/dbus_new_handlers.c
@@ -2568,7 +2568,7 @@ wpas_dbus_handler_tdls_cancel_channel_switch(DBusMessage *message,
  * wpas_dbus_handler_save_config - Save configuration to configuration file
  * @message: Pointer to incoming dbus message
  * @wpa_s: wpa_supplicant structure for a network interface
- * Returns: NULL on Success, Otherwise errror message
+ * Returns: NULL on Success, Otherwise error message
  *
  * Handler function for "SaveConfig" method call of network interface.
  */
diff --git a/wpa_supplicant/examples/p2p-action-udhcp.sh b/wpa_supplicant/examples/p2p-action-udhcp.sh
index d7d0e79b7..53d8b777c 100755
--- a/wpa_supplicant/examples/p2p-action-udhcp.sh
+++ b/wpa_supplicant/examples/p2p-action-udhcp.sh
@@ -50,7 +50,7 @@ fi
 if [ "$CMD" = "P2P-CROSS-CONNECT-ENABLE" ]; then
     GIFNAME=$3
     UPLINK=$4
-    # enable NAT/masquarade $GIFNAME -> $UPLINK
+    # enable NAT/masquerade $GIFNAME -> $UPLINK
     iptables -P FORWARD DROP
     iptables -t nat -A POSTROUTING -o $UPLINK -j MASQUERADE
     iptables -A FORWARD -i $UPLINK -o $GIFNAME -m state --state RELATED,ESTABLISHED -j ACCEPT
@@ -61,7 +61,7 @@ fi
 if [ "$CMD" = "P2P-CROSS-CONNECT-DISABLE" ]; then
     GIFNAME=$3
     UPLINK=$4
-    # disable NAT/masquarade $GIFNAME -> $UPLINK
+    # disable NAT/masquerade $GIFNAME -> $UPLINK
     sysctl net.ipv4.ip_forward=0
     iptables -t nat -D POSTROUTING -o $UPLINK -j MASQUERADE
     iptables -D FORWARD -i $UPLINK -o $GIFNAME -m state --state RELATED,ESTABLISHED -j ACCEPT
diff --git a/wpa_supplicant/examples/p2p-action.sh b/wpa_supplicant/examples/p2p-action.sh
index 797d43a00..6c27b27b7 100755
--- a/wpa_supplicant/examples/p2p-action.sh
+++ b/wpa_supplicant/examples/p2p-action.sh
@@ -77,7 +77,7 @@ fi
 if [ "$CMD" = "P2P-CROSS-CONNECT-ENABLE" ]; then
     GIFNAME=$3
     UPLINK=$4
-    # enable NAT/masquarade $GIFNAME -> $UPLINK
+    # enable NAT/masquerade $GIFNAME -> $UPLINK
     iptables -P FORWARD DROP
     iptables -t nat -A POSTROUTING -o $UPLINK -j MASQUERADE
     iptables -A FORWARD -i $UPLINK -o $GIFNAME -m state --state RELATED,ESTABLISHED -j ACCEPT
@@ -88,7 +88,7 @@ fi
 if [ "$CMD" = "P2P-CROSS-CONNECT-DISABLE" ]; then
     GIFNAME=$3
     UPLINK=$4
-    # disable NAT/masquarade $GIFNAME -> $UPLINK
+    # disable NAT/masquerade $GIFNAME -> $UPLINK
     sysctl net.ipv4.ip_forward=0
     iptables -t nat -D POSTROUTING -o $UPLINK -j MASQUERADE
     iptables -D FORWARD -i $UPLINK -o $GIFNAME -m state --state RELATED,ESTABLISHED -j ACCEPT
diff --git a/wpa_supplicant/examples/p2p/p2p_connect.py b/wpa_supplicant/examples/p2p/p2p_connect.py
index 2f62e9c94..bfb553341 100644
--- a/wpa_supplicant/examples/p2p/p2p_connect.py
+++ b/wpa_supplicant/examples/p2p/p2p_connect.py
@@ -71,7 +71,7 @@ class P2P_Connect():
 	global wpas_dbus_interfaces_interface
 	global wpas_dbus_interfaces_p2pdevice
 
-	# Dictionary of Arguements
+	# Dictionary of Arguments
 	global p2p_connect_arguements
 
 	# Constructor
@@ -146,9 +146,9 @@ class P2P_Connect():
 			signal_name="WpsFailed")
 
 
-	#Constructing all the arguements needed to connect
+	#Constructing all the arguments needed to connect
 	def constructArguements(self):
-		# Adding required arguements
+		# Adding required arguments
 		self.p2p_connect_arguements = {'wps_method':self.wps_method,
 			'peer':dbus.ObjectPath(self.path+'/Peers/'+self.addr)}
 
@@ -198,7 +198,7 @@ class P2P_Connect():
 			usage()
 			quit()
 
-		# Go_intent is optional for all arguements
+		# Go_intent is optional for all arguments
 		if (self.go_intent != None):
 			self.p2p_connect_arguements.update(
 				{'go_intent':dbus.Int32(self.go_intent)})
@@ -239,7 +239,7 @@ if __name__ == "__main__":
 		usage()
 		quit()
 
-	# If theres a switch, override default option
+	# If there's a switch, override default option
 	for key, value in options:
 		# Help
 		if (key == "-h"):
@@ -266,9 +266,9 @@ if __name__ == "__main__":
 		else:
 			assert False, "unhandled option"
 
-	# Required Arguements check
+	# Required Arguments check
 	if (interface_name == None or wps_method == None or addr == None):
-		print("Error:\n  Required arguements not specified")
+		print("Error:\n  Required arguments not specified")
 		usage()
 		quit()
 
@@ -289,7 +289,7 @@ if __name__ == "__main__":
 			addr,pin,wps_method,go_intent)
 
 	except:
-		print("Error:\n  Invalid Arguements")
+		print("Error:\n  Invalid Arguments")
 		usage()
 		quit()
 
diff --git a/wpa_supplicant/examples/p2p/p2p_disconnect.py b/wpa_supplicant/examples/p2p/p2p_disconnect.py
index 85b5a8b39..f04b98e66 100644
--- a/wpa_supplicant/examples/p2p/p2p_disconnect.py
+++ b/wpa_supplicant/examples/p2p/p2p_disconnect.py
@@ -125,7 +125,7 @@ if __name__ == "__main__":
 		usage()
 		quit()
 
-	# If theres a switch, override default option
+	# If there's a switch, override default option
 	for key, value in options:
 		# Help
 		if (key == "-h"):
diff --git a/wpa_supplicant/examples/p2p/p2p_find.py b/wpa_supplicant/examples/p2p/p2p_find.py
index e2df52896..412d81200 100644
--- a/wpa_supplicant/examples/p2p/p2p_find.py
+++ b/wpa_supplicant/examples/p2p/p2p_find.py
@@ -136,7 +136,7 @@ if __name__ == "__main__":
 		usage()
 		quit()
 
-	# If theres a switch, override default option
+	# If there's a switch, override default option
 	for key, value in options:
 		# Help
 		if (key == "-h"):
diff --git a/wpa_supplicant/examples/p2p/p2p_flush.py b/wpa_supplicant/examples/p2p/p2p_flush.py
index 42fc7a3e9..5cc3a0e18 100644
--- a/wpa_supplicant/examples/p2p/p2p_flush.py
+++ b/wpa_supplicant/examples/p2p/p2p_flush.py
@@ -125,7 +125,7 @@ if __name__ == "__main__":
 		usage()
 		quit()
 
-	# If theres a switch, override default option
+	# If there's a switch, override default option
 	for key, value in options:
 		# Help
 		if (key == "-h"):
diff --git a/wpa_supplicant/examples/p2p/p2p_group_add.py b/wpa_supplicant/examples/p2p/p2p_group_add.py
index 6d408218a..fbfc2382e 100644
--- a/wpa_supplicant/examples/p2p/p2p_group_add.py
+++ b/wpa_supplicant/examples/p2p/p2p_group_add.py
@@ -18,7 +18,7 @@ def usage():
 	print("  		[-w <wpas_dbus_interface>]")
 	print("Options:")
 	print("  -i = interface name")
-	print("  -p = persistant group = 0 (0=false, 1=true)")
+	print("  -p = persistent group = 0 (0=false, 1=true)")
 	print("  -f = frequency")
 	print("  -o = persistent group object path")
 	print("  -w = wpas dbus interface = fi.w1.wpa_supplicant1")
@@ -57,7 +57,7 @@ class P2P_Group_Add (threading.Thread):
 	global wpas_dbus_interfaces_interface
 	global wpas_dbus_interfaces_p2pdevice
 
-	# Arguements
+	# Arguments
 	global P2PDictionary
 
 	# Constructor
@@ -141,7 +141,7 @@ class P2P_Group_Add (threading.Thread):
 			self.p2p_interface.GroupAdd(self.P2PDictionary)
 
 		except:
-			print("Error:\n  Could not preform group add")
+			print("Error:\n  Could not perform group add")
 			usage()
 			os._exit(0)
 
@@ -172,7 +172,7 @@ if __name__ == "__main__":
 		usage()
 		quit()
 
-	# If theres a switch, override default option
+	# If there's a switch, override default option
 	for key, value in options:
 		# Help
 		if (key == "-h"):
@@ -213,7 +213,7 @@ if __name__ == "__main__":
 		p2p_group_add_test = P2P_Group_Add(interface_name,wpas_dbus_interface,
 					persistent,frequency,persistent_group_object)
 	except:
-		print("Error:\n  Invalid Arguements")
+		print("Error:\n  Invalid Arguments")
 
 	p2p_group_add_test.constructArguements()
 	p2p_group_add_test.start()
diff --git a/wpa_supplicant/examples/p2p/p2p_invite.py b/wpa_supplicant/examples/p2p/p2p_invite.py
index 341dcd0a9..8944e11ed 100644
--- a/wpa_supplicant/examples/p2p/p2p_invite.py
+++ b/wpa_supplicant/examples/p2p/p2p_invite.py
@@ -25,7 +25,7 @@ def usage():
 
 # Required Signals
 def InvitationResult(invite_result):
-	print("Inviation Result signal :")
+	print("Invitation Result signal :")
 	status = invite_result['status']
 	print("status = ", status)
 	if invite_result.has_key('BSSID'):
@@ -55,7 +55,7 @@ class P2P_Invite (threading.Thread):
 	global wpas_dbus_interfaces_interface
 	global wpas_dbus_interfaces_p2pdevice
 
-	# Arguements
+	# Arguments
 	global P2PDictionary
 
 	# Constructor
@@ -127,7 +127,7 @@ class P2P_Invite (threading.Thread):
 			self.p2p_interface.Invite(self.P2PDictionary)
 
 		except:
-			print("Error:\n  Invalid Arguements")
+			print("Error:\n  Invalid Arguments")
 			usage()
 			os._exit(0)
 
@@ -154,7 +154,7 @@ if __name__ == "__main__":
 		usage()
 		quit()
 
-	# If theres a switch, override default option
+	# If there's a switch, override default option
 	for key, value in options:
 		# Help
 		if (key == "-h"):
@@ -190,7 +190,7 @@ if __name__ == "__main__":
 			P2P_Invite(interface_name,wpas_dbus_interface,
 					addr,persistent_group_object)
 	except:
-		print("Error:\n  Invalid Arguements")
+		print("Error:\n  Invalid Arguments")
 		usage()
 		os._exit(1)
 
diff --git a/wpa_supplicant/examples/p2p/p2p_listen.py b/wpa_supplicant/examples/p2p/p2p_listen.py
index b0837d9df..cbeda9ff4 100644
--- a/wpa_supplicant/examples/p2p/p2p_listen.py
+++ b/wpa_supplicant/examples/p2p/p2p_listen.py
@@ -126,7 +126,7 @@ if __name__ == "__main__":
 		usage()
 		quit()
 
-	# If theres a switch, override default option
+	# If there's a switch, override default option
 	for key, value in options:
 		# Help
 		if (key == "-h"):
diff --git a/wpa_supplicant/examples/p2p/p2p_stop_find.py b/wpa_supplicant/examples/p2p/p2p_stop_find.py
index bdb4c0e32..f36719645 100644
--- a/wpa_supplicant/examples/p2p/p2p_stop_find.py
+++ b/wpa_supplicant/examples/p2p/p2p_stop_find.py
@@ -130,7 +130,7 @@ if __name__ == "__main__":
 		usage()
 		quit()
 
-	# If theres a switch, override default option
+	# If there's a switch, override default option
 	for key, value in options:
 		# Help
 		if (key == "-h"):
diff --git a/wpa_supplicant/examples/udhcpd-p2p.conf b/wpa_supplicant/examples/udhcpd-p2p.conf
index df5909408..9916a166c 100644
--- a/wpa_supplicant/examples/udhcpd-p2p.conf
+++ b/wpa_supplicant/examples/udhcpd-p2p.conf
@@ -11,8 +11,8 @@ end		192.168.42.254	#default: 192.168.0.254
 interface	wlan2		#default: eth0
 
 
-# The maximim number of leases (includes addressesd reserved
-# by OFFER's, DECLINE's, and ARP conficts
+# The maximum number of leases (includes addressesd reserved
+# by OFFER's, DECLINE's, and ARP conflicts
 
 #max_leases	254		#default: 254
 
@@ -52,12 +52,12 @@ interface	wlan2		#default: eth0
 # If a lease to be given is below this value, the full lease time is
 # instead used (seconds).
 
-#min_lease	60		#defult: 60
+#min_lease	60		#default: 60
 
 
 # The location of the leases file
 
-#lease_file	/var/lib/misc/udhcpd.leases	#defualt: /var/lib/misc/udhcpd.leases
+#lease_file	/var/lib/misc/udhcpd.leases	#default: /var/lib/misc/udhcpd.leases
 
 # The location of the pid file
 pidfile	/var/run/udhcpd-wlan2.pid	#default: /var/run/udhcpd.pid
@@ -77,7 +77,7 @@ pidfile	/var/run/udhcpd-wlan2.pid	#default: /var/run/udhcpd.pid
 
 #boot_file	/var/nfs_root		#default: (none)
 
-# The remainer of options are DHCP options and can be specifed with the
+# The remainder of options are DHCP options and can be specified with the
 # keyword 'opt' or 'option'. If an option can take multiple items, such
 # as the dns option, they can be listed on the same line, or multiple
 # lines. The only option with a default is 'lease'.
diff --git a/wpa_supplicant/interworking.c b/wpa_supplicant/interworking.c
index 00e1492c6..ce11491b9 100644
--- a/wpa_supplicant/interworking.c
+++ b/wpa_supplicant/interworking.c
@@ -2532,7 +2532,7 @@ static void interworking_select_network(struct wpa_supplicant *wpa_s)
 	    (selected_cred == NULL ||
 	     cred_prio_cmp(selected_home_cred, selected_cred) >= 0)) {
 		/* Prefer network operated by the Home SP */
-		wpa_printf(MSG_DEBUG, "Interworking: Overrided selected with selected_home");
+		wpa_printf(MSG_DEBUG, "Interworking: Overrode selected with selected_home");
 		selected = selected_home;
 		selected_cred = selected_home_cred;
 	}
diff --git a/wpa_supplicant/sme.c b/wpa_supplicant/sme.c
index 7fec1cd8d..9b4eeb915 100644
--- a/wpa_supplicant/sme.c
+++ b/wpa_supplicant/sme.c
@@ -300,7 +300,7 @@ static void sme_auth_handle_rrm(struct wpa_supplicant *wpa_s,
 	*pos++ = WLAN_EID_RRM_ENABLED_CAPABILITIES;
 	*pos++ = rrm_ie_len;
 
-	/* Set supported capabilites flags */
+	/* Set supported capabilities flags */
 	if (wpa_s->drv_rrm_flags & WPA_DRIVER_FLAGS_TX_POWER_INSERTION)
 		*pos |= WLAN_RRM_CAPS_LINK_MEASUREMENT;
 
diff --git a/wpa_supplicant/wmm_ac.c b/wpa_supplicant/wmm_ac.c
index 38800cc77..d0fdd55d3 100644
--- a/wpa_supplicant/wmm_ac.c
+++ b/wpa_supplicant/wmm_ac.c
@@ -400,7 +400,7 @@ static int wmm_ac_ts_req_is_valid(struct wpa_supplicant *wpa_s,
 
 	req_ac = up_to_ac[params->user_priority];
 
-	/* Requested accesss category must have acm */
+	/* Requested access category must have acm */
 	if (!wpa_s->wmm_ac_assoc_info->ac_params[req_ac].acm) {
 		wpa_printf(MSG_DEBUG, "WMM AC: AC %d is not ACM", req_ac);
 		return 0;
diff --git a/wpa_supplicant/wpa_supplicant.conf b/wpa_supplicant/wpa_supplicant.conf
index c10dd73ea..46f78755d 100644
--- a/wpa_supplicant/wpa_supplicant.conf
+++ b/wpa_supplicant/wpa_supplicant.conf
@@ -526,7 +526,7 @@ fast_reauth=1
 #go_venue_group=7
 #go_venue_type=1
 
-# Homogenous ESS identifier
+# Homogeneous ESS identifier
 # If this is set, scans will be used to request response only from BSSes
 # belonging to the specified Homogeneous ESS. This is used only if interworking
 # is enabled.
-- 
2.17.0




More information about the Hostap mailing list