[PATCH v2] hostapd: Add HE 6 GHz band capability configuration
Rajkumar Manoharan
rmanohar at codeaurora.org
Sat Oct 3 04:22:38 EDT 2020
Enable user to configure Maximum MPDU Length, Maximum A-MPDU Length
Exponent, Rx Antenna Pattern Consistency and Tx Antenna Pattern
Consistency of 6 GHz capability through config file.
Signed-off-by: Rajkumar Manoharan <rmanohar at codeaurora.org>
---
v2: fixed compile error when IEEE80211AX is not set
hostapd/config_file.c | 8 ++++++++
hostapd/hostapd.conf | 34 ++++++++++++++++++++++++++++++++++
src/ap/ap_config.c | 4 ++++
src/ap/ap_config.h | 4 ++++
src/ap/hostapd.c | 3 +++
src/ap/hw_features.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++++
src/ap/hw_features.h | 6 ++++++
src/ap/ieee802_11_he.c | 13 ++++++++++++-
8 files changed, 119 insertions(+), 1 deletion(-)
diff --git a/hostapd/config_file.c b/hostapd/config_file.c
index 542c8cd0df5c..f5e9d56c7042 100644
--- a/hostapd/config_file.c
+++ b/hostapd/config_file.c
@@ -3553,6 +3553,14 @@ static int hostapd_config_fill(struct hostapd_config *conf,
conf->he_oper_centr_freq_seg0_idx = atoi(pos);
} else if (os_strcmp(buf, "he_oper_centr_freq_seg1_idx") == 0) {
conf->he_oper_centr_freq_seg1_idx = atoi(pos);
+ } else if (os_strcmp(buf, "he_6ghz_max_mpdu") == 0) {
+ conf->he_6ghz_max_mpdu = atoi(pos);
+ } else if (os_strcmp(buf, "he_6ghz_max_ampdu_len_exp") == 0) {
+ conf->he_6ghz_max_ampdu_len_exp = atoi(pos);
+ } else if (os_strcmp(buf, "he_6ghz_rx_ant_pat") == 0) {
+ conf->he_6ghz_rx_ant_pat = atoi(pos);
+ } else if (os_strcmp(buf, "he_6ghz_tx_ant_pat") == 0) {
+ conf->he_6ghz_tx_ant_pat = atoi(pos);
#endif /* CONFIG_IEEE80211AX */
} else if (os_strcmp(buf, "max_listen_interval") == 0) {
bss->max_listen_interval = atoi(pos);
diff --git a/hostapd/hostapd.conf b/hostapd/hostapd.conf
index 25b4e49276c0..6255cc8fcb07 100644
--- a/hostapd/hostapd.conf
+++ b/hostapd/hostapd.conf
@@ -867,6 +867,40 @@ wmm_ac_vo_acm=0
#he_spr_srg_obss_pd_min_offset
#he_spr_srg_obss_pd_max_offset
+#he_6ghz_max_mpdu: Maximum MPDU Length of HE 6 GHz band
+# capabilities. Indicates maximum MPDU length
+# 0 = 3895 octets
+# 1 = 7991 octets
+# 2 = 11454 octets (default)
+#he_6ghz_max_mpdu=2
+#
+#he_6ghz_max_ampdu_len_exp: Maximum A-MPDU Length Exponent of HE 6 GHz band
+# capabilities. Indicates the maximum length of A-MPDU pre-EOF padding that
+# the STA can receive. This field is an integer in the range of 0 to 7.
+# The length defined by this field is equal to
+# 2 pow(13 + Maximum A-MPDU Length Exponent) -1 octets
+# 0 = AMPDU length of 8k
+# 1 = AMPDU length of 16k
+# 2 = AMPDU length of 32k
+# 3 = AMPDU length of 65k
+# 4 = AMPDU length of 131k
+# 5 = AMPDU length of 262k
+# 6 = AMPDU length of 524k
+# 7 = AMPDU length of 1048k (default)
+#he_6ghz_max_ampdu_len_exp=7
+#
+#he_6ghz_rx_ant_pat: Rx Antenna Pattern Consistency of HE 6 GHz capability.
+# Indicates the possibility of Rx antenna pattern change
+# 0 = Rx antenna pattern might change during the lifetime of an association
+# 1 = Rx antenna pattern does not change during the lifetime of an association
+#he_6ghz_rx_ant_pat=1
+#
+#he_6ghz_tx_ant_pat: Tx Antenna Pattern Consistency of HE 6 GHz capability.
+# Indicates the possibility of Tx antenna pattern change
+# 0 = Tx antenna pattern might change during the lifetime of an association
+# 1 = Tx antenna pattern does not change during the lifetime of an association
+#he_6ghz_tx_ant_pat=1
+#
##### IEEE 802.1X-2004 related configuration ##################################
# Require IEEE 802.1X authorization
diff --git a/src/ap/ap_config.c b/src/ap/ap_config.c
index 04535a16398b..720429d2ab6c 100644
--- a/src/ap/ap_config.c
+++ b/src/ap/ap_config.c
@@ -268,6 +268,10 @@ struct hostapd_config * hostapd_config_defaults(void)
conf->he_op.he_bss_color_disabled = 1;
conf->he_op.he_bss_color_partial = 0;
conf->he_op.he_bss_color = 1;
+ conf->he_6ghz_max_mpdu = 2;
+ conf->he_6ghz_max_ampdu_len_exp = 7;
+ conf->he_6ghz_rx_ant_pat = 1;
+ conf->he_6ghz_tx_ant_pat = 1;
#endif /* CONFIG_IEEE80211AX */
/* The third octet of the country string uses an ASCII space character
diff --git a/src/ap/ap_config.h b/src/ap/ap_config.h
index bada04c3efaa..a96a46e2ed78 100644
--- a/src/ap/ap_config.h
+++ b/src/ap/ap_config.h
@@ -1029,6 +1029,10 @@ struct hostapd_config {
u8 he_oper_chwidth;
u8 he_oper_centr_freq_seg0_idx;
u8 he_oper_centr_freq_seg1_idx;
+ u8 he_6ghz_max_mpdu;
+ u8 he_6ghz_max_ampdu_len_exp;
+ u8 he_6ghz_rx_ant_pat;
+ u8 he_6ghz_tx_ant_pat;
#endif /* CONFIG_IEEE80211AX */
/* VHT enable/disable config from CHAN_SWITCH */
diff --git a/src/ap/hostapd.c b/src/ap/hostapd.c
index b37f49f9a8ec..2d8d56e15345 100644
--- a/src/ap/hostapd.c
+++ b/src/ap/hostapd.c
@@ -1701,6 +1701,9 @@ static int setup_interface2(struct hostapd_iface *iface)
ret = hostapd_check_edmg_capab(iface);
if (ret < 0)
goto fail;
+ ret = hostapd_check_he_6ghz_capab(iface);
+ if (ret < 0)
+ goto fail;
ret = hostapd_check_ht_capab(iface);
if (ret < 0)
goto fail;
diff --git a/src/ap/hw_features.c b/src/ap/hw_features.c
index f6e69030d767..c20e09a16756 100644
--- a/src/ap/hw_features.c
+++ b/src/ap/hw_features.c
@@ -732,6 +732,54 @@ int hostapd_check_edmg_capab(struct hostapd_iface *iface)
}
+int hostapd_check_he_6ghz_capab(struct hostapd_iface *iface)
+{
+#ifdef CONFIG_IEEE80211AX
+ struct he_capabilities *he_cap;
+ u16 hw;
+
+ if (!iface->current_mode)
+ return 0;
+
+ if (!is_6ghz_freq(iface->freq))
+ return 0;
+
+ he_cap = &iface->current_mode->he_capab[IEEE80211_MODE_AP];
+ hw = he_cap->he_6ghz_capa;
+ if (iface->conf->he_6ghz_max_mpdu >
+ ((hw & HE_6GHZ_BAND_CAP_MAX_MPDU_LEN_MASK) >>
+ HE_6GHZ_BAND_CAP_MAX_MPDU_LEN_SHIFT)) {
+ wpa_printf(MSG_ERROR, "Driver does not support configured "
+ "HE 6GHz Max MPDU length");
+ return -1;
+ }
+
+ if (iface->conf->he_6ghz_max_ampdu_len_exp >
+ ((hw & HE_6GHZ_BAND_CAP_MAX_AMPDU_LEN_EXP_MASK) >>
+ HE_6GHZ_BAND_CAP_MAX_AMPDU_LEN_EXP_SHIFT)) {
+ wpa_printf(MSG_ERROR, "Driver does not support configured "
+ "HE 6 GHz Max AMPDU Length Exponent");
+ return -1;
+ }
+
+ if (iface->conf->he_6ghz_rx_ant_pat &&
+ !(hw & HE_6GHZ_BAND_CAP_RX_ANTPAT_CONS)) {
+ wpa_printf(MSG_ERROR, "Driver does not support configured "
+ "HE 6 GHz Rx Antenna Pattern");
+ return -1;
+ }
+
+ if (iface->conf->he_6ghz_tx_ant_pat &&
+ !(hw & HE_6GHZ_BAND_CAP_TX_ANTPAT_CONS)) {
+ wpa_printf(MSG_ERROR, "Driver does not support configured "
+ "HE 6 GHz Tx Antenna Pattern");
+ return -1;
+ }
+#endif
+ return 0;
+}
+
+
static int hostapd_is_usable_chan(struct hostapd_iface *iface,
int frequency, int primary)
{
diff --git a/src/ap/hw_features.h b/src/ap/hw_features.h
index dd24f95b2ad8..ad0ddf7ff386 100644
--- a/src/ap/hw_features.h
+++ b/src/ap/hw_features.h
@@ -22,6 +22,7 @@ int hostapd_hw_get_freq(struct hostapd_data *hapd, int chan);
int hostapd_hw_get_channel(struct hostapd_data *hapd, int freq);
int hostapd_check_ht_capab(struct hostapd_iface *iface);
int hostapd_check_edmg_capab(struct hostapd_iface *iface);
+int hostapd_check_he_6ghz_capab(struct hostapd_iface *iface);
int hostapd_prepare_rates(struct hostapd_iface *iface,
struct hostapd_hw_modes *mode);
void hostapd_stop_setup_timers(struct hostapd_iface *iface);
@@ -85,6 +86,11 @@ static inline int hostapd_hw_skip_mode(struct hostapd_iface *iface,
return 0;
}
+static inline int hostapd_check_he_6ghz_capab(struct hostapd_iface *iface)
+{
+ return 0;
+}
+
#endif /* NEED_AP_MLME */
#endif /* HW_FEATURES_H */
diff --git a/src/ap/ieee802_11_he.c b/src/ap/ieee802_11_he.c
index 85b714090673..607020b67677 100644
--- a/src/ap/ieee802_11_he.c
+++ b/src/ap/ieee802_11_he.c
@@ -313,6 +313,7 @@ u8 * hostapd_eid_spatial_reuse(struct hostapd_data *hapd, u8 *eid)
u8 * hostapd_eid_he_6ghz_band_cap(struct hostapd_data *hapd, u8 *eid)
{
+ struct hostapd_config *conf = hapd->iface->conf;
struct hostapd_hw_modes *mode = hapd->iface->current_mode;
struct he_capabilities *he_cap;
struct ieee80211_he_6ghz_band_cap *cap;
@@ -324,8 +325,18 @@ u8 * hostapd_eid_he_6ghz_band_cap(struct hostapd_data *hapd, u8 *eid)
return eid;
he_cap = &mode->he_capab[IEEE80211_MODE_AP];
- capab = he_cap->he_6ghz_capa;
+ capab = (he_cap->he_6ghz_capa & HE_6GHZ_BAND_CAP_MIN_MPDU_START);
+ capab |= ((conf->he_6ghz_max_ampdu_len_exp <<
+ HE_6GHZ_BAND_CAP_MAX_AMPDU_LEN_EXP_SHIFT) &
+ HE_6GHZ_BAND_CAP_MAX_AMPDU_LEN_EXP_MASK);
+ capab |= ((conf->he_6ghz_max_mpdu <<
+ HE_6GHZ_BAND_CAP_MAX_MPDU_LEN_SHIFT) &
+ HE_6GHZ_BAND_CAP_MAX_MPDU_LEN_MASK);
capab |= HE_6GHZ_BAND_CAP_SMPS_DISABLED;
+ if (conf->he_6ghz_rx_ant_pat)
+ capab |= HE_6GHZ_BAND_CAP_RX_ANTPAT_CONS;
+ if (conf->he_6ghz_tx_ant_pat)
+ capab |= HE_6GHZ_BAND_CAP_TX_ANTPAT_CONS;
pos = eid;
*pos++ = WLAN_EID_EXTENSION;
--
2.7.4
More information about the Hostap
mailing list