January 2016 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Mon Jan 4 00:32:57 PST 2016
Ending: Sun Jan 31 23:41:27 PST 2016
Messages: 326

• [PATCH 1/2] of: Add for_each_compatible_node_from iterator   Sascha Hauer
  • [PATCH 1/2] OF: fix typo in for_each_compatible_node()   Trent Piepho
    • [PATCH 1/2] OF: fix typo in for_each_compatible_node()   Sascha Hauer
  • [PATCH 2/2] OF: Fix fixups to fix Linux DT instead of Barebox DT   Trent Piepho
    • [PATCH 2/2] OF: Fix fixups to fix Linux DT instead of Barebox DT   Sascha Hauer
  • [PATCH 1/2] of: Add for_each_compatible_node_from iterator   Trent Piepho
    • [PATCH 1/2] of: Add for_each_compatible_node_from iterator   Sascha Hauer
      • [PATCH 1/2] of: Add for_each_compatible_node_from iterator   Yegor Yefremov
      • [PATCH 1/2] of: Add for_each_compatible_node_from iterator   Sascha Hauer
      • [PATCH 1/2] of: Add for_each_compatible_node_from iterator   Yegor Yefremov
      • [PATCH 1/2] of: Add for_each_compatible_node_from iterator   Trent Piepho
      • [PATCH 1/2] of: Add for_each_compatible_node_from iterator   Sascha Hauer
• [PATCH 0/7] bcm283x: add support for raspberry pi 2   Sascha Hauer
• [RFC] device probe order   Sascha Hauer
• Patchwork for Barebox   Sascha Hauer
  • Patchwork for Barebox   Yegor Yefremov
• [PATCH 2/6] ARM: mmu: Add VBAR setup   Sascha Hauer
• [PATCH 3/6] ARM: Fix exception table setup in MMU-less mode   Sascha Hauer
  • [PATCH 3/6] ARM: Fix exception table setup in MMU-less mode   Andrey Smirnov
    • [PATCH 3/6] ARM: Fix exception table setup in MMU-less mode   Sascha Hauer
• [PATCH 6/6] i.MX6: pci: Avoid aborts when asserting PCIe reset   Sascha Hauer
  • [PATCH 6/6] i.MX6: pci: Avoid aborts when asserting PCIe reset   Lucas Stach
• [PATCH 1/2] mtd: nand: Add erased page bitflip check helper functions   Sascha Hauer
• [PATCH 0/3] FIT Support   Marc Kleine-Budde
  • [PATCH 1/3] crypto: add enum   Marc Kleine-Budde
    • [PATCH 1/3] crypto: add enum   Sam Ravnborg
      • [PATCH 1/3] crypto: add enum   Marc Kleine-Budde
      • [PATCH 1/3] crypto: add enum   Sam Ravnborg
  • [PATCH 2/3] crypto: add RSA support   Marc Kleine-Budde
  • [PATCH 3/3] bootm: add initial FIT support   Marc Kleine-Budde
    • [PATCH 3/3] bootm: add initial FIT support   Yegor Yefremov
      • [PATCH 3/3] bootm: add initial FIT support   Marc Kleine-Budde
      • [PATCH 3/3] bootm: add initial FIT support   Yegor Yefremov
      • [PATCH 3/3] bootm: add initial FIT support   Marc Kleine-Budde
      • [PATCH 3/3] bootm: add initial FIT support   Yegor Yefremov
      • [PATCH 3/3] bootm: add initial FIT support   Marc Kleine-Budde
      • [PATCH 3/3] bootm: add initial FIT support   Yegor Yefremov
      • [PATCH 3/3] bootm: add initial FIT support   Jan Lübbe
      • [PATCH 3/3] bootm: add initial FIT support   Yegor Yefremov
    • [PATCH 3/3] bootm: add initial FIT support   Trent Piepho
      • [PATCH 3/3] bootm: add initial FIT support   Marc Kleine-Budde
      • [PATCH 3/3] bootm: add initial FIT support   Jan Lübbe
• [RFC 0/4] FIT Support   Marc Kleine-Budde
• [PATCH 1/2] readline: Fix potential buffer overflow   Sascha Hauer
  • [PATCH 2/2] readline: Fix potential buffer overflow in command history   Sascha Hauer
• FIT support: node syntax   Yegor Yefremov
• [PATCH v2 0/3] FIT Support   Marc Kleine-Budde
  • [PATCH v2 1/3] crypto: add digest_alloc_by_algo()   Marc Kleine-Budde
  • [PATCH v2 2/3] crypto: add RSA support   Marc Kleine-Budde
    • [PATCH v2 2/3] crypto: add RSA support   Trent Piepho
      • [PATCH v2 2/3] crypto: add RSA support   Sascha Hauer
  • [PATCH v2 3/3] bootm: add initial FIT support   Marc Kleine-Budde
    • [PATCH v2 3/3] bootm: add initial FIT support   Sascha Hauer
• [PATCH 1/6] rtc: ds1307: Add code to support ds1337/1341   Andrey Smirnov
  • [PATCH 2/6] rtc: ds1307: Fix a memory leak   Andrey Smirnov
  • [PATCH 3/6] rtc-lib: Check tm_wday for validity in rtc_valid_tm()   Andrey Smirnov
    • [PATCH 3/6] rtc-lib: Check tm_wday for validity in rtc_valid_tm()   Antony Pavlov
      • [PATCH 3/6] rtc-lib: Check tm_wday for validity in rtc_valid_tm()   Andrey Smirnov
  • [PATCH 5/6] common/date.c: Fix off-by-one error   Andrey Smirnov
    • [PATCH 5/6] common/date.c: Fix off-by-one error   Sascha Hauer
  • [PATCH 6/6] commands/hwclock: Check return value of rtc_read_time()   Andrey Smirnov
    • [PATCH 6/6] commands/hwclock: Check return value of rtc_read_time()   Antony Pavlov
  • [PATCH 1/6] rtc: ds1307: Add code to support ds1337/1341   Antony Pavlov
  • [PATCH 1/6] rtc: ds1307: Add code to support ds1337/1341   Sascha Hauer
• [PATCH 4/6] i.MX6: pci: Replace magic number with a named constant   Lucas Stach
  • [PATCH 4/6] i.MX6: pci: Replace magic number with a named constant   Sascha Hauer
• [PATCH 5/6] i.MX6: pci: Reconcile imx6_pcie_start_link with the kernel code   Lucas Stach
• [PATCH] PCI: imx6: properly shut down core when leaving barebox   Lucas Stach
  • [PATCH] PCI: imx6: properly shut down core when leaving barebox   Sascha Hauer
• [PATCH] usb: chipidea-imx: check return value of regulator_get()   Lucas Stach
  • [PATCH] usb: chipidea-imx: check return value of regulator_get()   Sascha Hauer
• [PATCH] of_path: Make partition names work again   Sascha Hauer
  • [PATCH] of_path: Make partition names work again   Trent Piepho
    • [PATCH] of_path: Make partition names work again   Sascha Hauer
• [PATCH] fs: automount: Make automountpoints persistent   Sascha Hauer
• [PATCH] remote control support   Sascha Hauer
  • [PATCH 1/8] Add Reliable Asynchronous Transfer Protocol   Sascha Hauer
    • [PATCH 1/8] Add Reliable Asynchronous Transfer Protocol   Andrey Smirnov
  • [PATCH 2/8] barebox remote control   Sascha Hauer
    • [PATCH 2/8] barebox remote control   Andrey Smirnov
      • [PATCH 2/8] barebox remote control   Sascha Hauer
      • [PATCH 2/8] barebox remote control   Andrey Smirnov
    • [PATCH 2/8] barebox remote control   Andrey Smirnov
  • [PATCH 3/8] fs: Add RATP fs support   Sascha Hauer
    • [PATCH 3/8] fs: Add RATP fs support   Andrey Smirnov
  • [PATCH 4/8] include pyserial trunk   Sascha Hauer
    • [PATCH 4/8] include pyserial trunk   Yegor Yefremov
      • [PATCH 4/8] include pyserial trunk   Sascha Hauer
  • [PATCH 6/8] host side for barebox remote control   Sascha Hauer
    • [PATCH 6/8] host side for barebox remote control   Andrey Smirnov
      • [PATCH 6/8] host side for barebox remote control   Jan Lübbe
• [PATCH 5/8] pyserial: decrease timeouts   Sascha Hauer
• [PATCH 7/8] defaultenv2: Add automount for RATPFS   Sascha Hauer
• [PATCH 8/8] barebox remote control: Documentation   Sascha Hauer
  • [PATCH 8/8] barebox remote control: Documentation   Andrey Smirnov
    • [PATCH 8/8] barebox remote control: Documentation   Sascha Hauer
• [PATCH] FIT: make RSA signature verification configurable   yegorslists at googlemail.com
  • [PATCH] FIT: make RSA signature verification configurable   Marc Kleine-Budde
    • [PATCH] FIT: make RSA signature verification configurable   Yegor Yefremov
      • [PATCH] FIT: make RSA signature verification configurable   Marc Kleine-Budde
      • [PATCH] FIT: make RSA signature verification configurable   Sascha Hauer
• [PATCH] reset: fix non GPIO reset   Lucas Stach
  • [PATCH] reset: fix non GPIO reset   Sascha Hauer
• [PATCH v2 1/3] ARM: asm: Add convenience fucntions to access VBAR   Andrey Smirnov
  • [PATCH 2/3] ARM: mmu: Add VBAR setup   Andrey Smirnov
  • [PATCH 3/3] ARM: Fix exception table setup in MMU-less mode   Andrey Smirnov
  • [PATCH v2 1/3] ARM: asm: Add convenience fucntions to access VBAR   Sascha Hauer
    • [PATCH v2 1/3] ARM: asm: Add convenience fucntions to access VBAR   Andrey Smirnov
      • [PATCH v2 1/3] ARM: asm: Add convenience fucntions to access VBAR   Sascha Hauer
• [PATCH v2] FIT: make RSA signature verification configurable   yegorslists at googlemail.com
• v2016.01.0   Sascha Hauer
• [PATCH] hush: Initialize struct p_context   Sascha Hauer
• [PATCH] hush: fix indentation   Sascha Hauer
• [PATCH] FIT: bootm: accept configuration name as string   yegorslists at googlemail.com
  • [PATCH] FIT: bootm: accept configuration name as string   Trent Piepho
• [BUG] barebox won't boot from SD card on iMX233-OLinuXino-MAXI   Peter Mamonov
  • [BUG] barebox won't boot from SD card on iMX233-OLinuXino-MAXI   Fabio Estevam
    • [BUG] barebox won't boot from SD card on iMX233-OLinuXino-MAXI   Peter Mamonov
• [PATCH] imx233-olinuxino: Fix mx23_power_init() arguments   Fabio Estevam
  • [PATCH] imx233-olinuxino: Fix mx23_power_init() arguments   Sascha Hauer
• [PATCH v2 1/2] of: rework of_node_cmp() to support short and full node names   yegorslists at googlemail.com
  • [PATCH v2 2/2] FIT: bootm: accept configuration name as string   yegorslists at googlemail.com
  • [PATCH v2 1/2] of: rework of_node_cmp() to support short and full node names   Sascha Hauer
    • [PATCH v2 1/2] of: rework of_node_cmp() to support short and full node names   Yegor Yefremov
• [PATCH] ARM: tegra: clean up lowlevel entry   Lucas Stach
  • [PATCH] ARM: tegra: clean up lowlevel entry   Sascha Hauer
• [PATCH] input core   Sascha Hauer
  • [PATCH 01/15] poller: Fix async poller   Sascha Hauer
  • [PATCH 02/15] keymap: Fix braces   Sascha Hauer
  • [PATCH 03/15] keymap: remove exotic and nonprintable keys   Sascha Hauer
  • [PATCH 04/15] keymap: Add keypad keys   Sascha Hauer
  • [PATCH 05/15] keymap: Add apostrophe, backslash and home   Sascha Hauer
  • [PATCH 06/15] keymap: Add keymap for keys with shift pressed   Sascha Hauer
  • [PATCH 07/15] input: Add input core   Sascha Hauer
  • [PATCH 08/15] input: usb keyboard: convert to input framework   Sascha Hauer
  • [PATCH 09/15] input: imx-keypad: Use dev_* functions   Sascha Hauer
  • [PATCH 12/15] input: Add device tree parsing support for matrix keymap   Sascha Hauer
  • [PATCH 13/15] input: imx-keypad: Add device tree support   Sascha Hauer
  • [PATCH 14/15] input: gpio-keys: Use KEY_* keycodes   Sascha Hauer
  • [PATCH 15/15] input: gpio-keys: convert to input framework   Sascha Hauer
• [PATCH 10/15] input: move matrix_keypad_build_keymap() to C file   Sascha Hauer
• [PATCH 11/15] input: imx-keypad: convert to input framework   Sascha Hauer
• [PATCH] state: hmac: fix error message that algo is displayed   Marc Kleine-Budde
  • [PATCH] state: hmac: fix error message that algo is displayed   Sascha Hauer
• Verified boot support with FIT   Marc Kleine-Budde
  • Verified boot support with FIT   Simon Glass
  • Verified boot support with FIT   Jan Lübbe
    • Verified boot support with FIT   Simon Glass
• [PATCH 1/2] vsprintf: Add support for %pa   Sascha Hauer
• [PATCH 2/2] Convert users of PRINTF_CONVERSION_RESOURCE to %pa   Sascha Hauer
• [PATCH v3] FIT support   Sascha Hauer
  • [PATCH 01/13] ARM: zImage: add missing free() in appended device tree code   Sascha Hauer
  • [PATCH 02/13] bootm: Do not call uimage_close twice   Sascha Hauer
  • [PATCH 03/13] bootm: introduce bootm_get_os_size   Sascha Hauer
  • [PATCH 04/13] bootm: use names instead of numbers for image parts   Sascha Hauer
  • [PATCH 05/13] ARM: bootm: Use kernel handler to start barebox image   Sascha Hauer
  • [PATCH 06/13] bootm: Push dryrun to handlers   Sascha Hauer
  • [PATCH 07/13] bootm: move initrd code together   Sascha Hauer
  • [PATCH 08/13] bootm: move oftree code together   Sascha Hauer
  • [PATCH 09/13] bootm: Initialize bootm_data defaults in single place   Sascha Hauer
  • [PATCH 10/13] crypto: add digest_alloc_by_algo()   Sascha Hauer
  • [PATCH 11/13] crypto: add RSA support   Sascha Hauer
  • [PATCH 12/13] bootm: make verifying/hashing configurable   Sascha Hauer
  • [PATCH 13/13] bootm: add initial FIT support   Sascha Hauer
    • [PATCH 13/13] bootm: add initial FIT support   Holger Schurig
      • [PATCH 13/13] bootm: add initial FIT support   Sascha Hauer
  • [PATCH v3] FIT support   Yegor Yefremov
• [PATCH] fixup! input: gpio-keys: convert to input framework   Marc Kleine-Budde
  • [PATCH] fixup! input: gpio-keys: convert to input framework   Sascha Hauer
• [PATCH 02/20] e1000: Fix a bug in e1000_detect_gig_phy   Andrey Smirnov
• [PATCH 03/20] e1000: Remove unnecessary variable   Andrey Smirnov
• [PATCH 04/20] e1000: Do not read same register twice   Andrey Smirnov
• [PATCH 05/20] e1000: Remove unneeded i210 specific register code   Andrey Smirnov
• [PATCH 06/20] e1000: Consolidate register offset fixups   Andrey Smirnov
• [PATCH 07/20] e1000: Remove 'use_eewr' parameter   Andrey Smirnov
• [PATCH 08/20] e1000: Remove 'page_size'   Andrey Smirnov
• [PATCH 09/20] e1000: Simplify EEPROM init for e1000_80003es2lan   Andrey Smirnov
• [PATCH 10/20] e1000: Simplify EEPROM init for e1000_igb   Andrey Smirnov
• [PATCH 11/20] e1000: Consolidate SPI EEPROM init code   Andrey Smirnov
• [PATCH 12/20] e1000: Consolidate Microwire EEPROM init code   Andrey Smirnov
• [PATCH 13/20] e1000: Fix a bug in e1000_probe()   Andrey Smirnov
• [PATCH 14/20] e1000: Remove unnecessary intialization   Andrey Smirnov
• [PATCH 15/20] e1000: Refactor Flash/EEPROM reading code   Andrey Smirnov
• [PATCH 16/20] e1000: Add functions for register polling   Andrey Smirnov
  • [PATCH 16/20] e1000: Add functions for register polling   Sascha Hauer
    • [PATCH 16/20] e1000: Add functions for register polling   Andrey Smirnov
      • [PATCH 16/20] e1000: Add functions for register polling   Sascha Hauer
• [PATCH 17/20] e1000: Properly release SW_FW_SYNC semaphore bits   Andrey Smirnov
• [PATCH 18/20] e1000: Add EEPROM access locking for i210   Andrey Smirnov
• [PATCH 19/20] e1000: Expose i210's external flash as MTD   Andrey Smirnov
• [PATCH 20/20] e1000: Expose i210's iNVM as a cdev   Andrey Smirnov
• [PATCH] ARM: PXA: move HAVE_CLK select   Lucas Stach
  • [PATCH] ARM: PXA: move HAVE_CLK select   Sascha Hauer
    • [PATCH] ARM: PXA: move HAVE_CLK select   Sascha Hauer
• [RFC] usb: port UHCI driver from the u-boot   pmamonov at gmail.com
  • [RFC] usb: port UHCI driver from the u-boot   Sascha Hauer
• [PATCH] bootm: Add option to force booting signed images   Sascha Hauer
  • [PATCH] bootm: Add option to force booting signed images   Yegor Yefremov
    • [PATCH] bootm: Add option to force booting signed images   Sascha Hauer
• [PATCH 1/2] arm: am33xx: Move function to read from Master OSC   Teresa Remmet
  • [PATCH 2/2] arm: am33xx: Master Osc clock speed handling   Teresa Remmet
    • [PATCH 2/2] arm: am33xx: Master Osc clock speed handling   Sascha Hauer
  • [PATCH 1/2] arm: am33xx: Move function to read from Master OSC   Sascha Hauer
• [PATCH] kwboot: do a filetype check before sending the image   Uwe Kleine-König
  • [PATCH] kwboot: do a filetype check before sending the image   Sascha Hauer
• [PATCH] Add initial support for Netgear ReadyNAS 104   Uwe Kleine-König
  • [PATCH] Add initial support for Netgear ReadyNAS 104   Sascha Hauer
• [PATCH v2] kwboot: do a filetype check before sending the image   Uwe Kleine-König
  • [PATCH v2] kwboot: do a filetype check before sending the image   Sebastian Hesselbarth
  • [PATCH v2] kwboot: do a filetype check before sending the image   Trent Piepho
    • [PATCH v2] kwboot: do a filetype check before sending the image   Uwe Kleine-König
      • [PATCH v2] kwboot: do a filetype check before sending the image   Trent Piepho
• [PATCH] ARM: cm-fx6: set proper hostname   Philipp Zabel
  • [PATCH] ARM: cm-fx6: set proper hostname   Sascha Hauer
• [PATCH v2 0/3] i.MX6: CAAM engine support   Steffen Trumtrar
  • [PATCH v2 1/3] include: linux: add circular buffers   Steffen Trumtrar
  • [PATCH v2 2/3] crypto: add i.MX6 CAAM support   Steffen Trumtrar
    • [PATCH v2 2/3] crypto: add i.MX6 CAAM support   Steffen Trumtrar
  • [PATCH v2 3/3] crypto: caam: add RNG support   Steffen Trumtrar
• [PATCH v4] FIT support   Sascha Hauer
  • [PATCH 01/14] ARM: zImage: add missing free() in appended device tree code   Sascha Hauer
  • [PATCH 03/14] bootm: introduce bootm_get_os_size   Sascha Hauer
  • [PATCH 04/14] bootm: use names instead of numbers for image parts   Sascha Hauer
  • [PATCH 05/14] ARM: bootm: Use kernel handler to start barebox image   Sascha Hauer
  • [PATCH 06/14] bootm: Push dryrun to handlers   Sascha Hauer
  • [PATCH 08/14] bootm: move oftree code together   Sascha Hauer
  • [PATCH 10/14] crypto: add digest_alloc_by_algo()   Sascha Hauer
  • [PATCH 11/14] crypto: add RSA support   Sascha Hauer
  • [PATCH 12/14] bootm: make verifying/hashing configurable   Sascha Hauer
  • [PATCH 13/14] bootm: add initial FIT support   Sascha Hauer
  • [PATCH 14/14] bootm: Add option to force booting signed images   Sascha Hauer
• [PATCH 02/14] bootm: Do not call uimage_close twice   Sascha Hauer
• [PATCH 07/14] bootm: move initrd code together   Sascha Hauer
• [PATCH 09/14] bootm: Initialize bootm_data defaults in single place   Sascha Hauer
• [PATCH v3] kwboot: do a filetype check before sending the image   Uwe Kleine-König
  • [PATCH v3] kwboot: do a filetype check before sending the image   Sascha Hauer
• [RFC] fs: move super_block and inode definitions to central fs.h header   Yegor Yefremov
  • [RFC] fs: move super_block and inode definitions to central fs.h header   Yegor Yefremov
    • [RFC] fs: move super_block and inode definitions to central fs.h header   Sascha Hauer
      • [RFC] fs: move super_block and inode definitions to central fs.h header   Yegor Yefremov
      • [RFC] fs: move super_block and inode definitions to central fs.h header   Sascha Hauer
      • [RFC] fs: move super_block and inode definitions to central fs.h header   Yegor Yefremov
• [PATCH v2 1/2] arm: am33xx: Move function to read from Master OSC   Teresa Remmet
  • [PATCH v2 2/2] arm: am33xx: Master Osc clock speed handling   Teresa Remmet
  • [PATCH v2 1/2] arm: am33xx: Move function to read from Master OSC   Sascha Hauer
• [PATCH] arm: imx53-guf-vincell-lt: dts: do not specfiy fixed memory information   Enrico Jorns
  • [PATCH] arm: imx53-guf-vincell-lt: dts: do not specfiy fixed memory information   Sascha Hauer
• Barebox vs Raspberry PI   support at ambibox.ru
  • Barebox vs Raspberry PI   Antony Pavlov
• [PATCH 1/7] include/linux/phy.h: Add MII_ADDR_C45   Andrey Smirnov
  • [PATCH 2/7] net: Port bitbanged MDIO code from Linux kernel   Andrey Smirnov
  • [PATCH 3/7] miitool: Fix PHY argument handling   Andrey Smirnov
  • [PATCH 4/7] mdio_bus: Change dev_info to dev_dbg   Andrey Smirnov
  • [PATCH 5/7] mdio_bus: Add mdiobus_get_bus() function   Andrey Smirnov
  • [PATCH 6/7] miitool: Don't print negative parent IDs   Andrey Smirnov
  • [PATCH 7/7] commands: Add mdio_read and mdio_write   Andrey Smirnov
    • [PATCH 7/7] commands: Add mdio_read and mdio_write   Sascha Hauer
      • [PATCH 7/7] commands: Add mdio_read and mdio_write   Andrey Smirnov
      • [PATCH 7/7] commands: Add mdio_read and mdio_write   Trent Piepho
      • [PATCH 7/7] commands: Add mdio_read and mdio_write   Sascha Hauer
      • [PATCH 7/7] commands: Add mdio_read and mdio_write   Sascha Hauer
      • [PATCH 7/7] commands: Add mdio_read and mdio_write   Andrey Smirnov
• [PATCH] bootm: add missing curly brace   yegorslists at googlemail.com
  • [PATCH] bootm: add missing curly brace   Sascha Hauer
• scripts/remote: make clean leftovers   Yegor Yefremov
  • scripts/remote: make clean leftovers   Jan Lübbe
• [PATCH 1/3] fs: move struct timespec to include/linux/time.h   yegorslists at googlemail.com
  • [PATCH 2/3] fs: introduce include/linux/fs.h   yegorslists at googlemail.com
  • [PATCH 3/3] fs: import magic.h from Linux kernel   yegorslists at googlemail.com
  • [PATCH 1/3] fs: move struct timespec to include/linux/time.h   Sascha Hauer
• Linux headers   Yegor Yefremov
  • Linux headers   Sascha Hauer
• [PATCH 1/8] fs: move PAGE_CACHE definitions to include/linux/pagemap.h   yegorslists at googlemail.com
  • [PATCH 2/8] fs: ubifs: remove redundant macro defines   yegorslists at googlemail.com
  • [PATCH 3/8] fs: use linux/fs.h for file system related definitions   yegorslists at googlemail.com
  • [PATCH 4/8] fs: move pgoff_t definition to include/linux/types.h   yegorslists at googlemail.com
  • [PATCH 5/8] fs: ubifs: move dcache related definitions to include/linux/dcache.h   yegorslists at googlemail.com
  • [PATCH 6/8] fs: ubifs: move vfsmount definition to include/linux/mount.h   yegorslists at googlemail.com
  • [PATCH 7/8] fs: ubifs: move path definition to include/linux/path.h   yegorslists at googlemail.com
  • [PATCH 8/8] fs: ubifs: move file and file_system_type definitions to linux/fs.h   yegorslists at googlemail.com
  • [PATCH 1/8] fs: move PAGE_CACHE definitions to include/linux/pagemap.h   Sascha Hauer
• [PATCH 1/5] Introduce include/linux/sched.h   yegorslists at googlemail.com
  • [PATCH 2/5] Introduce include/linux/spinlock.h   yegorslists at googlemail.com
  • [PATCH 3/5] Introduce include/linux/mutex.h   yegorslists at googlemail.com
  • [PATCH 4/5] Introduce include/linux/wait.h   yegorslists at googlemail.com
  • [PATCH 5/5] Introduce include/linux/rwsem.h   yegorslists at googlemail.com
  • [PATCH 1/5] Introduce include/linux/sched.h   Sascha Hauer
• i.MX HABv4 rework and HABv3 support   Sascha Hauer
  • [PATCH 02/23] imx: hab: rename driver dir to hab/   Sascha Hauer
  • [PATCH 03/23] hab: Add HABv3 status report function   Sascha Hauer
  • [PATCH 04/23] scripts: imx-usb-loader: Make readonly arguments const   Sascha Hauer
  • [PATCH 06/23] scripts: imx-image: Allow dcd offset 0x0   Sascha Hauer
  • [PATCH 07/23] scripts: imx-usb-loader: fully read images into memory   Sascha Hauer
  • [PATCH 08/23] scripts: imx-usb-loader: Move load_file up   Sascha Hauer
  • [PATCH 09/23] scripts: imx: Consolidate flash headers in imx tools   Sascha Hauer
  • [PATCH 10/23] scripts: imx-image: Add context struct to config parsers   Sascha Hauer
  • [PATCH 11/23] scripts: imx-image: move write_mem to context data   Sascha Hauer
  • [PATCH 12/23] scripts: imx-image: move check to context data   Sascha Hauer
  • [PATCH 13/23] scripts: imx: move macro definitions to common header file   Sascha Hauer
    • [PATCH 13/23] scripts: imx: move macro definitions to common header file   Sam Ravnborg
  • [PATCH 14/23] scripts: imx: move config file parser to separate file   Sascha Hauer
  • [PATCH 15/23] scripts: imx: make libusb variables global   Sascha Hauer
  • [PATCH 16/23] scripts: imx-usb-loader: Add -s and -i options   Sascha Hauer
  • [PATCH 17/23] scripts: imx: Drop double check   Sascha Hauer
  • [PATCH 18/23] scripts: imx-image: move more variables to context data   Sascha Hauer
  • [PATCH 19/23] scripts: imx-image: pass config data to add_header_*   Sascha Hauer
  • [PATCH 20/23] scripts: imx-image: Support adding a Super Root Key to the image   Sascha Hauer
  • [PATCH 21/23] scripts: imx: Create CSF files from imx config file   Sascha Hauer
  • [PATCH 22/23] scripts: imx: Allow to create signed images   Sascha Hauer
  • [PATCH 23/23] scripts: imx: Generate signed images with imx-image   Sascha Hauer
• [PATCH 01/23] ARM: i.MX: Add HABv3 Kconfig variables   Sascha Hauer
• [PATCH 05/23] scripts: imx-usb-loader: Move definitions up   Sascha Hauer
• [PATCH 1/2] dcache: add missing linux/list.h include   yegorslists at googlemail.com
  • [PATCH 2/2] fs: add super_operations infrastructure   yegorslists at googlemail.com
• [PATCH v2 0/8] Bitbang MDIO, miitool changes   Andrey Smirnov
  • [PATCH v2 2/8] net: Port bitbanged MDIO code from Linux kernel   Andrey Smirnov
  • [PATCH v2 3/8] miitool: Fix PHY argument handling   Andrey Smirnov
  • [PATCH v2 4/8] mdio_bus: Change dev_info to dev_dbg   Andrey Smirnov
  • [PATCH v2 5/8] mdio_bus: Add mdiobus_get_bus() function   Andrey Smirnov
  • [PATCH v2 6/8] miitool: Don't print negative parent IDs   Andrey Smirnov
  • [PATCH v2 7/8] mdio_bus: Change PHY's naming scheme   Andrey Smirnov
  • [PATCH v2 8/8] miitool: Add code to register a PHY   Andrey Smirnov
• [PATCH v2 1/8] include/linux/phy.h: Add MII_ADDR_C45   Andrey Smirnov
• [PATCH] fixup! [PATCH v2 8/8] miitool: Add code to register a PHY   Andrey Smirnov
• [RFC 1/2] misc: Add MAC address mapper "driver"   Andrey Smirnov
  • [RFC 2/2] arm/dts: i.MX6: Use generic MAC address mapper   Andrey Smirnov

Last message date: Sun Jan 31 23:41:27 PST 2016
Archived on: Sun Jan 31 23:41:54 PST 2016

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...