[PATCH 09/20] e1000: Simplify EEPROM init for e1000_80003es2lan
Andrey Smirnov
andrew.smirnov at gmail.com
Sun Jan 17 19:52:30 PST 2016
That chip specifies read access uising EERD via use_eerd, which means
that none of the more "advanced" EEPROM parameters will be used for
reads, so remove them.
Signed-off-by: Andrey Smirnov <andrew.smirnov at gmail.com>
---
drivers/net/e1000/eeprom.c | 7 -------
1 file changed, 7 deletions(-)
diff --git a/drivers/net/e1000/eeprom.c b/drivers/net/e1000/eeprom.c
index 0cd0bf5..1abd630 100644
--- a/drivers/net/e1000/eeprom.c
+++ b/drivers/net/e1000/eeprom.c
@@ -370,13 +370,6 @@ int32_t e1000_init_eeprom_params(struct e1000_hw *hw)
break;
case e1000_80003es2lan:
eeprom->type = e1000_eeprom_spi;
- eeprom->opcode_bits = 8;
- eeprom->delay_usec = 1;
- if (eecd & E1000_EECD_ADDR_BITS)
- eeprom->address_bits = 16;
- else
- eeprom->address_bits = 8;
-
eeprom->use_eerd = true;
break;
case e1000_igb:
--
2.5.0
More information about the barebox
mailing list