[PATCH v2 2/8] net: Port bitbanged MDIO code from Linux kernel
Andrey Smirnov
andrew.smirnov at gmail.com
Sun Jan 31 19:10:07 PST 2016
From: Andrey Gusakov <andrey.gusakov at cogentembedded.com>
Port bitbanged MDIO framework and gpiolib MDIO bus driver that uses it
from Linux kernel.
Signed-off-by: Andrey Gusakov <andrey.gusakov at cogentembedded.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov at gmail.com>
---
drivers/net/phy/Kconfig | 15 +++
drivers/net/phy/Makefile | 2 +
drivers/net/phy/mdio-bitbang.c | 228 ++++++++++++++++++++++++++++++++++++++++
drivers/net/phy/mdio-gpio.c | 231 +++++++++++++++++++++++++++++++++++++++++
include/linux/mdio-bitbang.h | 45 ++++++++
5 files changed, 521 insertions(+)
create mode 100644 drivers/net/phy/mdio-bitbang.c
create mode 100644 drivers/net/phy/mdio-gpio.c
create mode 100644 include/linux/mdio-bitbang.h
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index d0a02c1..d30f65b 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -46,6 +46,21 @@ config MDIO_MVEBU
---help---
Driver for the MDIO bus found on Marvell EBU SoCs.
+config MDIO_BITBANG
+ bool "Support for bitbanged MDIO buses"
+ ---help---
+ This module implements the MDIO bus protocol in software,
+ for use by low level drivers that export the ability to
+ drive the relevant pins.
+
+ If in doubt, say N.
+
+config MDIO_GPIO
+ bool "Support for GPIO lib-based bitbanged MDIO buses"
+ depends on MDIO_BITBANG && GPIOLIB
+ ---help---
+ Supports GPIO lib-based MDIO busses.
+
endif
endmenu
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 94b9be8..10732f8 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -7,3 +7,5 @@ obj-$(CONFIG_NATIONAL_PHY) += national.o
obj-$(CONFIG_SMSC_PHY) += smsc.o
obj-$(CONFIG_MDIO_MVEBU) += mdio-mvebu.o
+obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
+obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
diff --git a/drivers/net/phy/mdio-bitbang.c b/drivers/net/phy/mdio-bitbang.c
new file mode 100644
index 0000000..4f610e3
--- /dev/null
+++ b/drivers/net/phy/mdio-bitbang.c
@@ -0,0 +1,228 @@
+/*
+ * Bitbanged MDIO support.
+ *
+ * Author: Scott Wood <scottwood at freescale.com>
+ * Copyright (c) 2007 Freescale Semiconductor
+ *
+ * Based on CPM2 MDIO code which is:
+ *
+ * Copyright (c) 2003 Intracom S.A.
+ * by Pantelis Antoniou <panto at intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug at ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <common.h>
+#include <driver.h>
+#include <linux/phy.h>
+#include <linux/mdio-bitbang.h>
+
+#define MDIO_READ 2
+#define MDIO_WRITE 1
+
+#define MDIO_C45 (1<<15)
+#define MDIO_C45_ADDR (MDIO_C45 | 0)
+#define MDIO_C45_READ (MDIO_C45 | 3)
+#define MDIO_C45_WRITE (MDIO_C45 | 1)
+
+#define MDIO_SETUP_TIME 10
+#define MDIO_HOLD_TIME 10
+
+/* Minimum MDC period is 400 ns, plus some margin for error. MDIO_DELAY
+ * is done twice per period.
+ */
+#define MDIO_DELAY 250
+
+/* The PHY may take up to 300 ns to produce data, plus some margin
+ * for error.
+ */
+#define MDIO_READ_DELAY 350
+
+/* MDIO must already be configured as output. */
+static void mdiobb_send_bit(struct mdiobb_ctrl *ctrl, int val)
+{
+ const struct mdiobb_ops *ops = ctrl->ops;
+
+ ops->set_mdio_data(ctrl, val);
+ ndelay(MDIO_DELAY);
+ ops->set_mdc(ctrl, 1);
+ ndelay(MDIO_DELAY);
+ ops->set_mdc(ctrl, 0);
+}
+
+/* MDIO must already be configured as input. */
+static int mdiobb_get_bit(struct mdiobb_ctrl *ctrl)
+{
+ const struct mdiobb_ops *ops = ctrl->ops;
+
+ ndelay(MDIO_DELAY);
+ ops->set_mdc(ctrl, 1);
+ ndelay(MDIO_READ_DELAY);
+ ops->set_mdc(ctrl, 0);
+
+ return ops->get_mdio_data(ctrl);
+}
+
+/* MDIO must already be configured as output. */
+static void mdiobb_send_num(struct mdiobb_ctrl *ctrl, u16 val, int bits)
+{
+ int i;
+
+ for (i = bits - 1; i >= 0; i--)
+ mdiobb_send_bit(ctrl, (val >> i) & 1);
+}
+
+/* MDIO must already be configured as input. */
+static u16 mdiobb_get_num(struct mdiobb_ctrl *ctrl, int bits)
+{
+ int i;
+ u16 ret = 0;
+
+ for (i = bits - 1; i >= 0; i--) {
+ ret <<= 1;
+ ret |= mdiobb_get_bit(ctrl);
+ }
+
+ return ret;
+}
+
+/* Utility to send the preamble, address, and
+ * register (common to read and write).
+ */
+static void mdiobb_cmd(struct mdiobb_ctrl *ctrl, int op, u8 phy, u8 reg)
+{
+ const struct mdiobb_ops *ops = ctrl->ops;
+ int i;
+
+ ops->set_mdio_dir(ctrl, 1);
+
+ /*
+ * Send a 32 bit preamble ('1's) with an extra '1' bit for good
+ * measure. The IEEE spec says this is a PHY optional
+ * requirement. The AMD 79C874 requires one after power up and
+ * one after a MII communications error. This means that we are
+ * doing more preambles than we need, but it is safer and will be
+ * much more robust.
+ */
+
+ for (i = 0; i < 32; i++)
+ mdiobb_send_bit(ctrl, 1);
+
+ /* send the start bit (01) and the read opcode (10) or write (10).
+ Clause 45 operation uses 00 for the start and 11, 10 for
+ read/write */
+ mdiobb_send_bit(ctrl, 0);
+ if (op & MDIO_C45)
+ mdiobb_send_bit(ctrl, 0);
+ else
+ mdiobb_send_bit(ctrl, 1);
+ mdiobb_send_bit(ctrl, (op >> 1) & 1);
+ mdiobb_send_bit(ctrl, (op >> 0) & 1);
+
+ mdiobb_send_num(ctrl, phy, 5);
+ mdiobb_send_num(ctrl, reg, 5);
+}
+
+/* In clause 45 mode all commands are prefixed by MDIO_ADDR to specify the
+ lower 16 bits of the 21 bit address. This transfer is done identically to a
+ MDIO_WRITE except for a different code. To enable clause 45 mode or
+ MII_ADDR_C45 into the address. Theoretically clause 45 and normal devices
+ can exist on the same bus. Normal devices should ignore the MDIO_ADDR
+ phase. */
+static int mdiobb_cmd_addr(struct mdiobb_ctrl *ctrl, int phy, u32 addr)
+{
+ unsigned int dev_addr = (addr >> 16) & 0x1F;
+ unsigned int reg = addr & 0xFFFF;
+ mdiobb_cmd(ctrl, MDIO_C45_ADDR, phy, dev_addr);
+
+ /* send the turnaround (10) */
+ mdiobb_send_bit(ctrl, 1);
+ mdiobb_send_bit(ctrl, 0);
+
+ mdiobb_send_num(ctrl, reg, 16);
+
+ ctrl->ops->set_mdio_dir(ctrl, 0);
+ mdiobb_get_bit(ctrl);
+
+ return dev_addr;
+}
+
+static int mdiobb_read(struct mii_bus *bus, int phy, int reg)
+{
+ struct mdiobb_ctrl *ctrl = bus->priv;
+ int ret, i;
+
+ if (reg & MII_ADDR_C45) {
+ reg = mdiobb_cmd_addr(ctrl, phy, reg);
+ mdiobb_cmd(ctrl, MDIO_C45_READ, phy, reg);
+ } else
+ mdiobb_cmd(ctrl, MDIO_READ, phy, reg);
+
+ ctrl->ops->set_mdio_dir(ctrl, 0);
+
+ /* check the turnaround bit: the PHY should be driving it to zero, if this
+ * PHY is listed in phy_ignore_ta_mask as having broken TA, skip that
+ */
+ if (mdiobb_get_bit(ctrl) != 0) {
+ /* PHY didn't drive TA low -- flush any bits it
+ * may be trying to send.
+ */
+ for (i = 0; i < 32; i++)
+ mdiobb_get_bit(ctrl);
+
+ return 0xffff;
+ }
+
+ ret = mdiobb_get_num(ctrl, 16);
+ mdiobb_get_bit(ctrl);
+ return ret;
+}
+
+static int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val)
+{
+ struct mdiobb_ctrl *ctrl = bus->priv;
+
+ if (reg & MII_ADDR_C45) {
+ reg = mdiobb_cmd_addr(ctrl, phy, reg);
+ mdiobb_cmd(ctrl, MDIO_C45_WRITE, phy, reg);
+ } else
+ mdiobb_cmd(ctrl, MDIO_WRITE, phy, reg);
+
+ /* send the turnaround (10) */
+ mdiobb_send_bit(ctrl, 1);
+ mdiobb_send_bit(ctrl, 0);
+
+ mdiobb_send_num(ctrl, val, 16);
+
+ ctrl->ops->set_mdio_dir(ctrl, 0);
+ mdiobb_get_bit(ctrl);
+ return 0;
+}
+
+static int mdiobb_reset(struct mii_bus *bus)
+{
+ struct mdiobb_ctrl *ctrl = bus->priv;
+ if (ctrl->reset)
+ ctrl->reset(bus);
+ return 0;
+}
+
+struct mii_bus *alloc_mdio_bitbang(struct mdiobb_ctrl *ctrl)
+{
+ struct mii_bus *bus;
+
+ bus = xzalloc(sizeof(*bus));
+
+ bus->read = mdiobb_read;
+ bus->write = mdiobb_write;
+ bus->reset = mdiobb_reset;
+ bus->priv = ctrl;
+
+ return bus;
+}
+EXPORT_SYMBOL(alloc_mdio_bitbang);
diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c
new file mode 100644
index 0000000..a839f2d
--- /dev/null
+++ b/drivers/net/phy/mdio-gpio.c
@@ -0,0 +1,231 @@
+/*
+ * GPIO based MDIO bitbang driver.
+ * Supports OpenFirmware.
+ *
+ * (C) Copyright 2015
+ * CogentEmbedded, Andrey Gusakov <andrey.gusakov at cogentembedded.com>
+ *
+ * based on mvmdio driver from Linux
+ * Copyright (c) 2008 CSE Semaphore Belgium.
+ * by Laurent Pinchart <laurentp at cse-semaphore.com>
+ *
+ * Copyright (C) 2008, Paulius Zaleckas <paulius.zaleckas at teltonika.lt>
+ *
+ * Based on earlier work by
+ *
+ * Copyright (c) 2003 Intracom S.A.
+ * by Pantelis Antoniou <panto at intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug at ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#define DEBUG
+
+#include <common.h>
+#include <driver.h>
+#include <init.h>
+#include <io.h>
+#include <of.h>
+#include <of_gpio.h>
+#include <linux/phy.h>
+#include <gpio.h>
+#include <malloc.h>
+#include <xfuncs.h>
+
+#include <linux/mdio-bitbang.h>
+
+struct mdio_gpio_info {
+ struct mdiobb_ctrl ctrl;
+ int mdc, mdio, mdo;
+ int mdc_active_low, mdio_active_low, mdo_active_low;
+};
+
+struct mdio_gpio_info *mdio_gpio_of_get_info(struct device_d *dev)
+{
+ int ret;
+ enum of_gpio_flags flags;
+ struct mdio_gpio_info *info;
+
+ info = xzalloc(sizeof(*info));
+
+ ret = of_get_gpio_flags(dev->device_node, 0, &flags);
+ if (ret < 0) {
+ dev_dbg(dev, "failed to get MDC inforamtion from DT\n");
+ goto free_info;
+ }
+
+ info->mdc = ret;
+ info->mdc_active_low = flags & OF_GPIO_ACTIVE_LOW;
+
+ ret = of_get_gpio_flags(dev->device_node, 1, &flags);
+ if (ret < 0) {
+ dev_dbg(dev, "failed to get MDIO inforamtion from DT\n");
+ goto free_info;
+ }
+
+ info->mdio = ret;
+ info->mdio_active_low = flags & OF_GPIO_ACTIVE_LOW;
+
+ ret = of_get_gpio_flags(dev->device_node, 2, &flags);
+ if (ret > 0) {
+ dev_dbg(dev, "found MDO information in DT\n");
+ info->mdo = ret;
+ info->mdo_active_low = flags & OF_GPIO_ACTIVE_LOW;
+ }
+
+ return info;
+
+free_info:
+ free(info);
+ return ERR_PTR(ret);
+}
+
+static void mdio_dir(struct mdiobb_ctrl *ctrl, int dir)
+{
+ struct mdio_gpio_info *bitbang =
+ container_of(ctrl, struct mdio_gpio_info, ctrl);
+
+ if (bitbang->mdo) {
+ /* Separate output pin. Always set its value to high
+ * when changing direction. If direction is input,
+ * assume the pin serves as pull-up. If direction is
+ * output, the default value is high.
+ */
+ gpio_set_value(bitbang->mdo,
+ 1 ^ bitbang->mdo_active_low);
+ return;
+ }
+
+ if (dir)
+ gpio_direction_output(bitbang->mdio,
+ 1 ^ bitbang->mdio_active_low);
+ else
+ gpio_direction_input(bitbang->mdio);
+}
+
+static int mdio_get(struct mdiobb_ctrl *ctrl)
+{
+ struct mdio_gpio_info *bitbang =
+ container_of(ctrl, struct mdio_gpio_info, ctrl);
+
+ return gpio_get_value(bitbang->mdio) ^
+ bitbang->mdio_active_low;
+}
+
+static void mdio_set(struct mdiobb_ctrl *ctrl, int what)
+{
+ struct mdio_gpio_info *bitbang =
+ container_of(ctrl, struct mdio_gpio_info, ctrl);
+
+ if (bitbang->mdo)
+ gpio_set_value(bitbang->mdo,
+ what ^ bitbang->mdo_active_low);
+ else
+ gpio_set_value(bitbang->mdio,
+ what ^ bitbang->mdio_active_low);
+}
+
+static void mdc_set(struct mdiobb_ctrl *ctrl, int what)
+{
+ struct mdio_gpio_info *bitbang =
+ container_of(ctrl, struct mdio_gpio_info, ctrl);
+
+ gpio_set_value(bitbang->mdc, what ^ bitbang->mdc_active_low);
+}
+
+static struct mdiobb_ops mdio_gpio_ops = {
+ .set_mdc = mdc_set,
+ .set_mdio_dir = mdio_dir,
+ .set_mdio_data = mdio_set,
+ .get_mdio_data = mdio_get,
+};
+
+static int mdio_gpio_probe(struct device_d *dev)
+{
+ int ret;
+ struct device_node *np = dev->device_node;
+ struct mdio_gpio_info *info;
+ struct mii_bus *bus;
+
+ info = mdio_gpio_of_get_info(dev);
+ if (IS_ERR(info))
+ return PTR_ERR(info);
+
+ info->ctrl.ops = &mdio_gpio_ops;
+
+ ret = gpio_request(info->mdc, "mdc");
+ if (ret < 0) {
+ dev_dbg(dev, "failed to request MDC\n");
+ goto free_info;
+ }
+
+ ret = gpio_request(info->mdio, "mdio");
+ if (ret < 0) {
+ dev_dbg(dev, "failed to request MDIO\n");
+ goto free_mdc;
+ }
+
+ if (info->mdo) {
+ ret = gpio_request(info->mdo, "mdo");
+ if (ret < 0) {
+ dev_dbg(dev, "failed to request MDO\n");
+ goto free_mdio;
+ }
+
+ ret = gpio_direction_output(info->mdo, 1);
+ if (ret < 0) {
+ dev_dbg(dev, "failed to set MDO as output\n");
+ goto free_mdo;
+ }
+
+ ret = gpio_direction_input(info->mdio);
+ if (ret < 0) {
+ dev_dbg(dev, "failed to set MDIO as input\n");
+ goto free_mdo;
+ }
+ }
+
+ ret = gpio_direction_output(info->mdc, 0);
+ if (ret < 0) {
+ dev_dbg(dev, "failed to set MDC as output\n");
+ goto free_mdo;
+ }
+
+ bus = alloc_mdio_bitbang(&info->ctrl);
+ bus->parent = dev;
+ bus->dev.device_node = np;
+
+ dev->priv = bus;
+
+ ret = mdiobus_register(bus);
+ if (!ret)
+ return 0;
+
+ free(bus);
+free_mdo:
+ gpio_free(info->mdo);
+free_mdc:
+ gpio_free(info->mdc);
+free_mdio:
+ gpio_free(info->mdio);
+free_info:
+ free(info);
+ return ret;
+}
+
+static const struct of_device_id gpio_mdio_dt_ids[] = {
+ { .compatible = "virtual,mdio-gpio", },
+ { /* sentinel */ }
+};
+
+static struct driver_d mdio_gpio_driver = {
+ .name = "mdio-gpio",
+ .probe = mdio_gpio_probe,
+ .of_compatible = DRV_OF_COMPAT(gpio_mdio_dt_ids),
+};
+device_platform_driver(mdio_gpio_driver);
diff --git a/include/linux/mdio-bitbang.h b/include/linux/mdio-bitbang.h
new file mode 100644
index 0000000..76f52bb
--- /dev/null
+++ b/include/linux/mdio-bitbang.h
@@ -0,0 +1,45 @@
+#ifndef __LINUX_MDIO_BITBANG_H
+#define __LINUX_MDIO_BITBANG_H
+
+#include <linux/phy.h>
+
+struct module;
+
+struct mdiobb_ctrl;
+
+struct mdiobb_ops {
+ struct module *owner;
+
+ /* Set the Management Data Clock high if level is one,
+ * low if level is zero.
+ */
+ void (*set_mdc)(struct mdiobb_ctrl *ctrl, int level);
+
+ /* Configure the Management Data I/O pin as an input if
+ * "output" is zero, or an output if "output" is one.
+ */
+ void (*set_mdio_dir)(struct mdiobb_ctrl *ctrl, int output);
+
+ /* Set the Management Data I/O pin high if value is one,
+ * low if "value" is zero. This may only be called
+ * when the MDIO pin is configured as an output.
+ */
+ void (*set_mdio_data)(struct mdiobb_ctrl *ctrl, int value);
+
+ /* Retrieve the state Management Data I/O pin. */
+ int (*get_mdio_data)(struct mdiobb_ctrl *ctrl);
+};
+
+struct mdiobb_ctrl {
+ const struct mdiobb_ops *ops;
+ /* reset callback */
+ int (*reset)(struct mii_bus *bus);
+};
+
+/* The returned bus is not yet registered with the phy layer. */
+struct mii_bus *alloc_mdio_bitbang(struct mdiobb_ctrl *ctrl);
+
+/* The bus must already have been unregistered. */
+void free_mdio_bitbang(struct mii_bus *bus);
+
+#endif
--
2.5.0
More information about the barebox
mailing list