[PATCH v3] kwboot: do a filetype check before sending the image
Uwe Kleine-König
uwe at kleine-koenig.org
Fri Jan 22 11:33:40 PST 2016
Signed-off-by: Uwe Kleine-König <uwe at kleine-koenig.org>
---
Changes since (implicit) v1, sent with
Message-Id: 1453276010-4669-1-git-send-email-uwe at kleine-koenig.org:
- whitespace fix
- error out if a problem is detected
- add a commit log
Changes since v2, sent with
Message-Id: 1453277701-10367-1-git-send-email-uwe at kleine-koenig.org:
- add -f to not quit on failed test
- add const to img parameter
- check image length first
- write error messages to stderr instead of stdout
- simplify logic
Thanks to Sascha, Sebastian and Trend for the feedback.
scripts/kwboot.c | 72 ++++++++++++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 70 insertions(+), 2 deletions(-)
diff --git a/scripts/kwboot.c b/scripts/kwboot.c
index 46328d8ed006..9b0d1d0602a0 100644
--- a/scripts/kwboot.c
+++ b/scripts/kwboot.c
@@ -546,6 +546,63 @@ out:
return rc;
}
+static int
+kwboot_check_image(const unsigned char *img, size_t size)
+{
+ size_t i;
+ size_t header_size, image_size;
+ unsigned char csum = 0;
+
+ if (size < 0x20) {
+ fprintf(stderr,
+ "Image too small to even contain a Main Header\n");
+ return 1;
+ }
+
+ switch (img[0x0]) {
+ case 0x5a: /* SPI/NOR */
+ case 0x69: /* UART0 */
+ case 0x78: /* SATA */
+ case 0x8b: /* NAND */
+ case 0x9c: /* PCIe */
+ break;
+ default:
+ fprintf(stderr,
+ "Unknown boot source: 0x%hhx\n", img[0x0]);
+ return 1;
+ }
+
+ if (img[0x8] != 1) {
+ fprintf(stderr, "Unknown version: 0x%hhx\n", img[0x8]);
+ return 1;
+ }
+
+ image_size = img[0x4] | (img[0x5] << 8) |
+ (img[0x6] << 16) | (img[0x7] << 24);
+
+ header_size = (img[0x9] << 16) | img[0xa] | (img[0xb] << 8);
+
+ if (header_size + image_size != size) {
+ fprintf(stderr, "Size mismatch (%zu + %zu != %zu)\n",
+ header_size, image_size, size);
+ return 1;
+ }
+
+ for (i = 0; i < header_size; ++i)
+ csum += img[i];
+
+ csum -= img[0x1f];
+
+ if (csum != img[0x1f]) {
+ fprintf(stderr,
+ "Checksum mismatch: specified: 0x%02hhx, calculated: 0x%02hhx\n",
+ img[0x1f], csum);
+ return 1;
+ }
+
+ return 0;
+}
+
static void *
kwboot_mmap_image(const char *path, size_t *size, int prot)
{
@@ -608,7 +665,7 @@ int
main(int argc, char **argv)
{
const char *ttypath, *imgpath;
- int rv, rc, tty, term;
+ int rv, rc, tty, term, force = 0;
void *bootmsg;
void *debugmsg;
void *img;
@@ -628,7 +685,7 @@ main(int argc, char **argv)
kwboot_verbose = isatty(STDOUT_FILENO);
do {
- int c = getopt(argc, argv, "hb:dtB:D:");
+ int c = getopt(argc, argv, "b:dfhtB:D:");
if (c < 0)
break;
@@ -651,6 +708,10 @@ main(int argc, char **argv)
term = 1;
break;
+ case 'f':
+ force = 1;
+ break;
+
case 'B':
speed = kwboot_tty_speed(atoi(optarg));
if (speed == -1)
@@ -684,6 +745,13 @@ main(int argc, char **argv)
perror(imgpath);
goto out;
}
+
+ rc = kwboot_check_image(img, size);
+ if (rc && !force) {
+ fprintf(stderr,
+ "Image check failed, restart with -f to ignore\n");
+ goto out;
+ }
}
if (debugmsg) {
--
2.7.0.rc3
More information about the barebox
mailing list