[PATCH 2/2] arm: am33xx: Master Osc clock speed handling
Teresa Remmet
t.remmet at phytec.de
Tue Jan 19 00:30:54 PST 2016
From: Daniel Schultz <d.schultz at phytec.de>
Setup the plls with Master Osc. clock speed from the SYSBOOT
Configuration Pin.
Signed-off-by: Daniel Schultz <d.schultz at phytec.de>
---
arch/arm/boards/afi-gf/lowlevel.c | 2 +-
arch/arm/boards/beaglebone/lowlevel.c | 4 ++--
arch/arm/boards/phytec-som-am335x/lowlevel.c | 4 +---
arch/arm/mach-omap/am33xx_clock.c | 10 +++++++++-
arch/arm/mach-omap/include/mach/am33xx-clock.h | 2 +-
5 files changed, 14 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boards/afi-gf/lowlevel.c b/arch/arm/boards/afi-gf/lowlevel.c
index 4aaecb9..efe15ec 100644
--- a/arch/arm/boards/afi-gf/lowlevel.c
+++ b/arch/arm/boards/afi-gf/lowlevel.c
@@ -222,7 +222,7 @@ static noinline int gf_sram_init(void)
while(__raw_readl(AM33XX_WDT_REG(WWPS)) != 0x0);
/* Setup the PLLs and the clocks for the peripherals */
- am33xx_pll_init(MPUPLL_M_500, 24, DDRPLL_M_200);
+ am33xx_pll_init(MPUPLL_M_500, DDRPLL_M_200);
board_config_ddr();
diff --git a/arch/arm/boards/beaglebone/lowlevel.c b/arch/arm/boards/beaglebone/lowlevel.c
index 05b3e5f..79d5985 100644
--- a/arch/arm/boards/beaglebone/lowlevel.c
+++ b/arch/arm/boards/beaglebone/lowlevel.c
@@ -138,11 +138,11 @@ static noinline int beaglebone_sram_init(void)
/* Setup the PLLs and the clocks for the peripherals */
if (is_beaglebone_black()) {
- am33xx_pll_init(MPUPLL_M_500, 24, DDRPLL_M_400);
+ am33xx_pll_init(MPUPLL_M_500, DDRPLL_M_400);
am335x_sdram_init(0x18B, &ddr3_cmd_ctrl, &ddr3_regs,
&ddr3_data);
} else {
- am33xx_pll_init(MPUPLL_M_500, 24, DDRPLL_M_266);
+ am33xx_pll_init(MPUPLL_M_500, DDRPLL_M_266);
am335x_sdram_init(0x18B, &ddr2_cmd_ctrl, &ddr2_regs,
&ddr2_data);
}
diff --git a/arch/arm/boards/phytec-som-am335x/lowlevel.c b/arch/arm/boards/phytec-som-am335x/lowlevel.c
index 64c1c53..d7afbb6 100644
--- a/arch/arm/boards/phytec-som-am335x/lowlevel.c
+++ b/arch/arm/boards/phytec-som-am335x/lowlevel.c
@@ -32,7 +32,6 @@
#include "ram-timings.h"
-#define CLK_M_OSC_MHZ 25
#define DDR_IOCTRL 0x18B
static const struct am33xx_cmd_control physom_cmd = {
@@ -67,11 +66,10 @@ static noinline void physom_board_init(int sdram, void *fdt)
writel(WDT_DISABLE_CODE1, AM33XX_WDT_REG(WSPR));
while (readl(AM33XX_WDT_REG(WWPS)) != 0x0);
-
writel(WDT_DISABLE_CODE2, AM33XX_WDT_REG(WSPR));
while (readl(AM33XX_WDT_REG(WWPS)) != 0x0);
- am33xx_pll_init(MPUPLL_M_600, CLK_M_OSC_MHZ, DDRPLL_M_400);
+ am33xx_pll_init(MPUPLL_M_600, DDRPLL_M_400);
am335x_sdram_init(DDR_IOCTRL, &physom_cmd,
&timing->regs,
diff --git a/arch/arm/mach-omap/am33xx_clock.c b/arch/arm/mach-omap/am33xx_clock.c
index 19aeb59..23666f2 100644
--- a/arch/arm/mach-omap/am33xx_clock.c
+++ b/arch/arm/mach-omap/am33xx_clock.c
@@ -15,6 +15,7 @@
#include <common.h>
#include <asm/io.h>
#include <mach/am33xx-clock.h>
+#include <asm-generic/div64.h>
#define PRCM_MOD_EN 0x2
#define PRCM_FORCE_WAKEUP 0x2
@@ -304,8 +305,15 @@ void am33xx_enable_ddr_clocks(void)
/*
* Configure the PLL/PRCM for necessary peripherals
*/
-void am33xx_pll_init(int mpupll_M, int osc, int ddrpll_M)
+void am33xx_pll_init(int mpupll_M, int ddrpll_M)
{
+ int osc;
+ u64 tmp;
+
+ tmp = am33xx_get_osc_clock();
+ do_div(tmp, 1000000);
+ osc = tmp;
+
mpu_pll_config(mpupll_M, osc);
core_pll_config(osc);
per_pll_config(osc);
diff --git a/arch/arm/mach-omap/include/mach/am33xx-clock.h b/arch/arm/mach-omap/include/mach/am33xx-clock.h
index a458ccd..95a147f 100644
--- a/arch/arm/mach-omap/include/mach/am33xx-clock.h
+++ b/arch/arm/mach-omap/include/mach/am33xx-clock.h
@@ -183,7 +183,7 @@
#define CM_ALWON_GPMC_CLKCTRL CM_PER_GPMC_CLKCTRL
-void am33xx_pll_init(int mpupll_M, int osc, int ddrpll_M);
+void am33xx_pll_init(int mpupll_M, int ddrpll_M);
void am33xx_enable_ddr_clocks(void);
u64 am33xx_get_osc_clock(void);
--
1.9.1
More information about the barebox
mailing list