April 2012 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sun Apr 1 05:58:53 EDT 2012
Ending: Mon Apr 30 11:25:27 EDT 2012
Messages: 524

• nand_imx 4k support ?   Gabriel Tisan
  • nand_imx 4k support ?   Baruch Siach
    • nand_imx 4k support ?   Eric Bénard
      • nand_imx 4k support ?   Baruch Siach
      • nand_imx 4k support ?   Eric Bénard
      • nand_imx 4k support ?   Gabriel Tisan
      • nand_imx 4k support ?   Eric Bénard
      • nand_imx 4k support ?   Baruch Siach
      • nand_imx 4k support ?   Gabriel Tisan
      • nand_imx 4k support ?   Baruch Siach
• [PATCH] ARM i.MX51 babbage: Remove clock raise from power_init.   Sascha Hauer
• [PATCH] ARM i.MX51 eukrea_cpuimx51: Remove unused include   Sascha Hauer
• [PATCH 1/6] Rename definitions for ULPI registers   Sascha Hauer
• [PATCH] i.MX27: Added helper for setup chipselect control register   Sascha Hauer
• [PATCH] i.MX27: Added definition for 600 mHz PLL setup.   Sascha Hauer
• [PATCH] Select POLLER option for fsl_udc   Sascha Hauer
• [PATCH] i.MX27: Export boot source to magic variables   Sascha Hauer
• [PATCH] Add barebox.map and compressed default_env to distclean   Sascha Hauer
• [PATCH 0/4] mxs: iomux configuration improvements   Sascha Hauer
• [PATCH 0/2] mx28-evk LCD support   Sascha Hauer
• [PATCH 3/3] i.MX51: Fix NANDF_RDY_INT pin definition   Sascha Hauer
• [PATCH 1/6] cfi_flash: fix missing resource update when probing the cfi size   Sascha Hauer
• [PATCH 0/6 for this release]   Sascha Hauer
• [PATCH 1/4] mxs: Fix support for BITKEEPER() macro   Sascha Hauer
• [PATCH 0/9] AT91 update rm9200ek support and add sam9x5 support   Sascha Hauer
  • [PATCH 0/9] AT91 update rm9200ek support and add sam9x5 support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/8] net: dhcp: add support of tftp server ip or Etherboot file (option 150)   Sascha Hauer
  • [PATCH 3/8] net: dhcp: add support of tftp server ip or Etherboot file (option 150)   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/8] Network update DHCP/BOOTP   Sascha Hauer
• Boot linux from cramfs on USB   Jakob Malm
  • Boot linux from cramfs on USB   Sascha Hauer
    • Boot linux from cramfs on USB   Jakob Malm
      • Boot linux from cramfs on USB   Sascha Hauer
• [PATCH 0/8 v3] Network update DHCP/BOOTP   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/8] net: dhcp: factorise option recption handling   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 1/8] net: dhcp: factorise option recption handling   Sascha Hauer
      • [PATCH 1/8] net: dhcp: factorise option recption handling   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 1/8] net: dhcp: factorise option recption handling   Sascha Hauer
      • [PATCH 1/8 v4] net: dhcp: factorise option recption handling   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/8] net: dhcp: reset env variable before do a dhcp request   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 3/8] net: dhcp: add support of tftp name server   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 4/8] net: dhcp: factorise setting option code   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 5/8] net: dhcp: allow to set transmitted client id   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 6/8] net: dhcp: allow to set transmitted client uuid   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 7/8] net: dhcp: allow to set transmitted user class   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 8/8] net: env: getenv_ip use resolv   Jean-Christophe PLAGNIOL-VILLARD
• R: filling string variables in script   Martino Ruppi
  • R: filling string variables in script   Sascha Hauer
    • R: R: filling string variables in script   Sascha Hauer
• OMAP4 Panda - MMC access broken   Anand Gadiyar
  • OMAP4 Panda - MMC access broken   Sascha Hauer
    • OMAP4 Panda - MMC access broken   Anand Gadiyar
• [PATCH] Define barebox_loc magic variable only once   Alexander Shiyan
  • [PATCH] Define barebox_loc magic variable only once   Sascha Hauer
• S5PV210 CPU support   Alexey Galakhov
  • S5PV210 CPU support   Juergen Beisert
    • S5PV210 CPU support   Alexey Galakhov
      • S5PV210 CPU support   Juergen Beisert
      • S5PV210 CPU support   Alexey Galakhov
      • S5PV210 CPU support   Alexey Galakhov
      • S5PV210 CPU support   Juergen Beisert
• [PATCH 1/3] i.MX51: Use register names for imx_gpio_base   Alexander Shiyan
  • [PATCH 2/3] i.MX51: Removed 1000 MHz pll definition   Alexander Shiyan
    • [PATCH 2/3] i.MX51: Removed 1000 MHz pll definition   Sascha Hauer
  • [PATCH 3/3] i.MX5x: Unused pll definitions removed   Alexander Shiyan
• [PATCH] build bareboxenv for the target as well   Sascha Hauer
• [PATCH 0/6] net: minor cleanups & avoid endless retries   Wolfram Sang
  • [PATCH 4/6] net: arp_request: do not retry endlessly   Wolfram Sang
  • [PATCH 6/6] net: ping: do not retry endlessly   Wolfram Sang
  • [PATCH 0/6] net: minor cleanups & avoid endless retries   Sascha Hauer
• [PATCH 1/6] net: ping: send PING packets with 1-second interval   Wolfram Sang
• [PATCH 2/6] net: ping: remove unneeded initialization   Wolfram Sang
• [PATCH 3/6] net: tftp: check for error when retrying   Wolfram Sang
• [PATCH 5/6] net: tftp: do not retry endlessly   Wolfram Sang
• debugging on board   Gabriel Tisan
  • debugging on board   Sascha Hauer
    • debugging on board   Gabriel Tisan
      • debugging on board   Sascha Hauer
      • debugging on board   Gabriel Tisan
      • debugging on board   Sascha Hauer
      • debugging on board   Gabriel Tisan
      • debugging on board   Sascha Hauer
      • debugging on board   Jean-Christophe PLAGNIOL-VILLARD
      • debugging on board   Gabriel Tisan
      • debugging on board   Jean-Christophe PLAGNIOL-VILLARD
• Some last minute fixes for master branch   Sascha Hauer
  • [PATCH 1/5] string: remove unused bcopy function   Sascha Hauer
• [PATCH 2/5] mtd: fix compiler warning   Sascha Hauer
• [PATCH 3/5] USB gadget pxa: Fix compiler warning   Sascha Hauer
• [PATCH 4/5] mips: Fix compiler warnings   Sascha Hauer
• [PATCH 5/5] x86 linker script: Add missing _text   Sascha Hauer
• cfi driver fixes   Sascha Hauer
  • [PATCH 1/2] cfi flash: Fix loop count calculation   Sascha Hauer
    • [PATCH 1/2] cfi flash: Fix loop count calculation   Eric Bénard
  • [PATCH 2/2] cfi flash: Fix alignment problem   Sascha Hauer
• [PATCH] pcm027: add board support   Sascha Hauer
• [PATCH 0/3] arm: mxs: ocotp read support   Wolfram Sang
  • [PATCH 1/3] arm: mxs: add ocotp driver   Wolfram Sang
  • [PATCH 2/3] arm: mxs: tx28: get MAC from OCOTP   Wolfram Sang
  • [PATCH 3/3] net: eth: don't say that MAC comes from EEPROM   Wolfram Sang
  • [PATCH 0/3] arm: mxs: ocotp read support   Sascha Hauer
• barebox-2012.04.0   Sascha Hauer
• Currently broken defconfigs in barebox master branch   Sascha Hauer
• GPIO commands on OMAP4   Patrick
  • GPIO commands on OMAP4   Patrick
  • GPIO commands on OMAP4   Sascha Hauer
    • GPIO commands on OMAP4   Patrick
      • GPIO commands on OMAP4   Patrick
      • GPIO commands on OMAP4   Sascha Hauer
• [PATCH] imx27-regs: fix .h usage in assembly file   Eric Bénard
  • [PATCH] imx27-regs: fix .h usage in assembly file   Eric Bénard
  • [PATCH] imx27-regs: fix .h usage in assembly file   Sascha Hauer
• [PATCH 1/2] at91sam9260ek: fix build error   Eric Bénard
  • [PATCH 2/2] at91sam9g20ek: fix build error   Eric Bénard
  • [PATCH 1/2] at91sam9260ek: fix build error   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] fix mxs iomux error in mx23 case   Eric Bénard
  • [PATCH 2/2] at91sam9g45_devices: fix warning   Eric Bénard
• [PATCH 1/1] at91rm9200ek: set maximum nor flash size   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/1] at91rm9200ek: set maximum nor flash size   Sascha Hauer
• [PATCH] Remove EXPERIMENTAL flag from loady.   Uwe Hermann
  • [PATCH] Remove EXPERIMENTAL flag from loady.   Sascha Hauer
• [PATCH] Fixup DRIVER_VIDEO_S3C24XX usage.   Uwe Hermann
  • [PATCH] Fixup DRIVER_VIDEO_S3C24XX usage.   Juergen Beisert
  • [PATCH] Fixup DRIVER_VIDEO_S3C24XX usage.   Sascha Hauer
• [PATCH 1/2] menu: fix double action when "\n\r" or "\r\n" is received   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/2] menu: add color fancy support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/2] menu: fix double action when "\n\r" or "\r\n" is received   Sascha Hauer
• [PATCH 1/2] at91rm9200ek: set maximum nor flash size   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/2] at91sam9260ek/9g20ek: udpate defconfig   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 2/2 v2] at91sam9260ek/9g20ek: udpate defconfig   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 2/2 v2] at91sam9260ek/9g20ek: udpate defconfig   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/4] at91 boot menu support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/4] defaultenv: add support for custom board boot   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/4] at91sam9m10g45ek: add gpio keys support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 3/4] at91sam9m10g45ek: enable kernel console over framebuffer   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 4/4] at91sam9m10g45ek: add boot menu support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] arm: fix zImage support when a oftree is concatenated   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/1] arm: fix zImage support when a oftree is concatenated   Sascha Hauer
• [PATCH 1/3] defaultenv/boot: add support for oftree boot option support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/3] defaultenv/boot: add support for oftree boot option support   Sascha Hauer
• [PATCH 2/3] net: dhcp: add private extention 224 to pass the oftree file via dhcp.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] defaultenv: add support of oftree file pass via dhcp (option 224)   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] mx53loco: set dhcp vendor id   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/1] mx53loco: set dhcp vendor id   Sascha Hauer
• [PATCH] PCM-038: fix SRAM device name   Alexander Shiyan
  • [PATCH] PCM-038: fix SRAM device name   Sascha Hauer
• [PATCH] cfi_flash_intel: fix buffer write for width > 2   Eric Bénard
  • [PATCH] cfi_flash_intel: fix buffer write for width > 2   Sascha Hauer
    • [PATCH] cfi_flash_intel: fix buffer write for width > 2   Eric Bénard
• [PATCH 0/7] Calao Board oftree && MMU support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/7] usb-a926x: update DHCP vendor ID   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/7] usb-a926x: add oftree support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 3/7] usb-a926x: enable MMU   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 4/7] tny-a926x: update DHCP vendor ID   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 5/7] tny-a926x: udpate defconfig   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 6/7] tny-a926x: add oftree config support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 7/7] tny-a926x: enable MMU   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] defaultenv/update: fix dhcp-barebox support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/1] defaultenv/update: fix dhcp-barebox support   Sascha Hauer
• [PATCH 1/1] arm: add Android boot image support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/1] arm: add Android boot image support   Baruch Siach
  • [PATCH 1/1] filetype: add Android boot image support   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 1/1] filetype: add Android boot image support   Sascha Hauer
  • [PATCH 1/1] arm: add Android boot image support   Sascha Hauer
    • [PATCH 1/1] arm: add Android boot image support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] arm: fix zImage support when a oftree is concatenated   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH v2] arm: fix zImage support when a oftree is concatenated   Sascha Hauer
    • [PATCH v2] arm: fix zImage support when a oftree is concatenated   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/1] arm: bootm: zImage allow to use the concataned oftree   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 1/1] arm: bootm: zImage allow to use the concataned oftree   Sascha Hauer
      • [PATCH 1/1] arm: bootm: zImage allow to use the concataned oftree   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] Atmel reference board: add oftree boot support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/1] Atmel reference board: add oftree boot support   Sascha Hauer
• gpio_keys & gpio_request   Eric Bénard
  • gpio_keys & gpio_request   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/7] i.MX51: Allow to pass cpu clock to lowlevel init   Alexander Shiyan
  • [PATCH 3/7] i.MX51: Add iomux definitions for SDHC3   Alexander Shiyan
    • [PATCH 3/7] i.MX51: Add iomux definitions for SDHC3   Sascha Hauer
  • [PATCH 4/7] i.MX51: Add iomux definitions for GPIO3.0   Alexander Shiyan
  • [PATCH 5/7] i.MX51: Add iomux definitions for I2C2   Alexander Shiyan
  • [PATCH 6/7] i.MX51: Add PAD_CTL_HYS bit to SD_CLK pads   Alexander Shiyan
    • [PATCH 6/7] i.MX51: Add PAD_CTL_HYS bit to SD_CLK pads   Eric Bénard
      • Re[2]: [PATCH 6/7] i.MX51: Add PAD_CTL_HYS bit to SD_CLK pads   Alexander Shiyan
  • [PATCH 7/7] i.MX51: Add support for SDHC3   Alexander Shiyan
• [PATCH 2/7] i.MX53: Move specific i.MX53 silicon definitions to imx53-regs.h   Alexander Shiyan
  • [PATCH 2/7] i.MX53: Move specific i.MX53 silicon definitions to imx53-regs.h   Eric Bénard
    • [PATCH 2/7] i.MX53: Move specific i.MX53 silicon definitions to imx53-regs.h   Sascha Hauer
    • Re[2]: [PATCH 2/7] i.MX53: Move specific i.MX53 silicon definitions to imx53-regs.h   Alexander Shiyan
• [PATCH] menuconfig: Show "Barebox", not "Linux" at the top.   Uwe Hermann
  • [PATCH] menuconfig: Show "Barebox", not "Linux" at the top.   Sascha Hauer
• ehci patches   Sascha Hauer
  • [PATCH 1/4] USB ehci: make cache handling simpler   Sascha Hauer
  • [PATCH 2/4] USB ehci: speed up initialization   Sascha Hauer
  • [PATCH 3/4] ARM i.MX53: Setup USB clocks   Sascha Hauer
  • [PATCH 4/4] ARM i.MX53 LOCO: Add USB support   Sascha Hauer
• ARM i.MX5: Sync iomux to kernel   Sascha Hauer
  • [PATCH 1/4] ARM i.MX iomux-v3: Sync to kernel   Sascha Hauer
  • [PATCH 2/4] ARM i.MX iomux-v3: one bit more for pad_ctl   Sascha Hauer
  • [PATCH 4/4] ARM i.MX53 iomux: sync to kernel   Sascha Hauer
• [PATCH 3/4] ARM i.MX51 iomux: sync to kernel   Sascha Hauer
  • Re: [PATCH 3/4] ARM i.MX51 iomux: sync to kernel   Alexander Shiyan
• [PATCH 0/5] introduce binfmt support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/5] filetype: add Bourne Shell support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/5] Introduce binfmt support   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 2/5] Introduce binfmt support   Sascha Hauer
  • [PATCH 3/5] bootm: add uimage binfmt support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 4/5] arm: bootm: add barebox and zImage binfmt support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 5/5] defaultenv: add binfmt support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] Add support for OMAP4460 revision detection.   Anand Gadiyar
  • [PATCH] Add support for OMAP4460 revision detection.   Sascha Hauer
• [PATCH 0/2] zImage fix   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/2 v3] arm: fix zImage support when a oftree is concatenated   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/2 v3] arm: bootm: zImage allow to use the concataned oftree   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 0/2] zImage fix   Sascha Hauer
• [PATCH] make building of bareboxenv-target optional   Sascha Hauer
• [PATCH] arm: tx28: select OCOTP driver   Wolfram Sang
  • [PATCH] arm: tx28: select OCOTP driver   Sascha Hauer
• [PATCH 1/1] mx53/loco: udpate defconfig with USB host   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/1] mx53/loco: udpate defconfig with USB host   Sascha Hauer
• [PATCH V2 0/3] MPC85xx support   Renaud Barbier
  • [PATCH V2 1/3] Preparation stage to support multiple PPC architectures   Renaud Barbier
  • [PATCH V2 2/3] Minimal support of the MPC85xx architecture   Renaud Barbier
  • [PATCH V2 3/3] Minimal P2020RDB platform support and configuration file   Renaud Barbier
  • [PATCH V2 0/3] MPC85xx support   Sascha Hauer
    • [PATCH V3 0/3] MPC85xx support   Renaud Barbier
    • [PATCH V3 1/3] Preparation stage to support multiple PPC architectures   Renaud Barbier
      • [PATCH V3 1/3] Preparation stage to support multiple PPC architectures   Sascha Hauer
    • [PATCH V3 2/3] Minimal support of the MPC85xx architecture   Renaud Barbier
      • [PATCH V3 2/3] Minimal support of the MPC85xx architecture   Sascha Hauer
    • [PATCH V3 3/3] Minimal P2020RDB platform support and configuration file   Renaud Barbier
• [PATCH] bootm: be more informative with oftrees   Sascha Hauer
• initial i.MX6 support   Sascha Hauer
  • [PATCH 1/7] ARM: add initial i.MX6 support   Sascha Hauer
    • [PATCH 1/7] ARM: add initial i.MX6 support   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 1/7] ARM: add initial i.MX6 support   Sascha Hauer
    • [PATCH 1/7] ARM: add initial i.MX6 support   Sascha Hauer
      • [PATCH 1/7] ARM: add initial i.MX6 support   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 1/7] ARM: add initial i.MX6 support   Sascha Hauer
      • [PATCH 1/7] ARM: add initial i.MX6 support   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 1/7] ARM: add initial i.MX6 support   Sascha Hauer
      • [PATCH 1/7] ARM: add initial i.MX6 support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/7] serial i.MX: i.MX6 support   Sascha Hauer
    • [PATCH 2/7] serial i.MX: i.MX6 support   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 2/7] serial i.MX: i.MX6 support   Sascha Hauer
  • [PATCH 3/7] net fec: Add i.MX6 support   Sascha Hauer
  • [PATCH 5/7] net mii: Add mii_open/mii_close functions   Sascha Hauer
    • [PATCH 5/7] net mii: Add mii_open/mii_close functions   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 5/7] net mii: Add mii_open/mii_close functions   Sascha Hauer
      • [PATCH 5/7] net mii: Add mii_open/mii_close functions   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 5/7] net mii: Add mii_open/mii_close functions   Sascha Hauer
  • [PATCH 6/7] ARM: initial Freescale i.MX6q Armadillo2 support   Sascha Hauer
    • [PATCH 6/7] ARM: initial Freescale i.MX6q Armadillo2 support   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 6/7] ARM: initial Freescale i.MX6q Armadillo2 support   Sascha Hauer
      • [PATCH 6/7] ARM: initial Freescale i.MX6q Armadillo2 support   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 6/7] ARM: initial Freescale i.MX6q Armadillo2 support   Sascha Hauer
      • [PATCH 6/7] ARM: initial Freescale i.MX6q Armadillo2 support   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 6/7] ARM: initial Freescale i.MX6q Armadillo2 support   Eric Bénard
      • [PATCH 6/7] ARM: initial Freescale i.MX6q Armadillo2 support   Sascha Hauer
  • [PATCH 7/7] ARM Freescale i.MX6 Armadillo2: Add defconfig   Sascha Hauer
• [PATCH 4/7] mmc i.MX esdhc: Add i.MX6 support   Sascha Hauer
• console fixes   Sascha Hauer
  • [PATCH 2/2] netconsole: bail out if console_register fails   Sascha Hauer
• [PATCH 1/2] console simple: return with a proper error value   Sascha Hauer
• I want to use Barebox   ANDY KENNEDY
  • I want to use Barebox   Sascha Hauer
    • I want to use Barebox   ANDY KENNEDY
      • I want to use Barebox   Eric Bénard
      • I want to use Barebox   Jean-Christophe PLAGNIOL-VILLARD
    • I want to use Barebox   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] addpart: remove duplicate line in help text   Sascha Hauer
• IMX_IIM on which SoCs?   Wolfram Sang
  • IMX_IIM on which SoCs?   Eric Bénard
• [PATCH 0/6] some fixes   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/6] menu: enable the fancy color support only if HUSH is enabled   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/6] at91sam9263ek: update defconfig   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 3/6] defaultenv/update: add oftree support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 4/6] net: use net_alloc_packet to allocate packet   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 5/6] mx53/loco: udpate defconfig with USB host   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 6/6] arm: bootm: zImage: add error message when can not request the memory   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 6/6] arm: bootm: zImage: add error message when can not request the memory   Sascha Hauer
• [PATCH 0/3] Omap xloader boot menu support and beagle env   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/3] beagle: add default env support   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 1/3] beagle: add default env support   Eric Bénard
      • [PATCH 1/3] beagle: add default env support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/3] beagle: add xloader boot menu support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 3/3] beagle/xload: update defconfig   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 0/3] Omap xloader boot menu support and beagle env   Sascha Hauer
    • [PATCH 0/3] Omap xloader boot menu support and beagle env   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 0/3] Omap xloader boot menu support and beagle env   Sascha Hauer
• [PATCH 1/3] net: dhcp: add support to send the hostname to the dhcp server   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 3/3] config: switch machine to hostname   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/3] net: dhcp: add support to send the hostname to the dhcp server   Baruch Siach
  • [PATCH 1/3 v2] net: dhcp: add support to send the hostname to the dhcp server   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/3] net: dhcp: add support to send the hostname to the dhcp server   Sascha Hauer
• [PATCH 2/3] net: dhcp: allow to user env var as user class too   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/3] net: dhcp: allow to user env var as user class too   Sascha Hauer
    • [PATCH 2/3] net: dhcp: allow to user env var as user class too   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] defaultenv: add oftree file support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] Makefile: fix build timestamps   Sascha Hauer
• dns work   Sascha Hauer
• [PATCH 1/6] net dns: remove debug code   Sascha Hauer
• [PATCH 2/6] net: use static string in string_to_ip   Sascha Hauer
• [PATCH 3/6] net: add nameserver and domainname to net devices   Sascha Hauer
  • [PATCH 3/6] net: add nameserver and domainname to net devices   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 3/6] net: add nameserver and domainname to net devices   Sascha Hauer
      • [PATCH 3/6] net: add nameserver and domainname to net devices   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/6] dhcp: set global domainname and nameserver   Sascha Hauer
• [PATCH 5/6] dns: use global nameserver/domainname   Sascha Hauer
• [PATCH 6/6] fs tftp: use resolv to resolv ip address   Sascha Hauer
• [PATCH v2] dns work   Sascha Hauer
  • [PATCH 1/8] net dns: remove debug code   Sascha Hauer
  • [PATCH 4/8] net: register a 'net' device to store network specific variables   Sascha Hauer
  • [PATCH 5/8] dhcp: set global nameserver/domainname   Sascha Hauer
  • [PATCH 6/8] dns: use global nameserver/domainname   Sascha Hauer
  • [PATCH 7/8] fs tftp: use resolv to resolv ip address   Sascha Hauer
  • [PATCH 8/8] net: remove unused getenv_ip_dns   Sascha Hauer
  • [PATCH v2] dns work   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH] Use DEVICE_ID_DYNAMIC where applicable   Sascha Hauer
    • [PATCH] Use DEVICE_ID_DYNAMIC where applicable   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/8] net: use static string in string_to_ip   Sascha Hauer
• [PATCH 3/8] device: make singular devices possible   Sascha Hauer
• [PATCH] automount work   Sascha Hauer
• [PATCH 1/4] automount: Pass automount pass as environment variable   Sascha Hauer
• [PATCH 2/4] automount: fix argument parsing   Sascha Hauer
• [PATCH 3/4] automount: optionally make directory   Sascha Hauer
• [PATCH 4/4] automount: remove existing automountpoint   Sascha Hauer
• [PATCH] ppc cleanup   Sascha Hauer
  • [PATCH 1/2] ppc: remove unused init_board_data function   Sascha Hauer
  • [PATCH 2/2] ppc: remove unused bd_t   Sascha Hauer
• [PATCH] generic default environment - 2nd try   Sascha Hauer
  • [PATCH 1/2] add 2nd generation default env   Sascha Hauer
    • [PATCH 1/2] add 2nd generation default env   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 1/2] add 2nd generation default env   Sascha Hauer
• [PATCH 2/2] ARM pcm038: switch to new default environment   Sascha Hauer
• [PATCH V2 2/2] Add board support for Karo TX51 i.mx51 SODIMM module.   Sascha Hauer
• barebox JSON   christian.buettner at rafi.de
  • barebox JSON   Jean-Christophe PLAGNIOL-VILLARD
    • Antwort: Re: barebox JSON   christian.buettner at rafi.de
      • Antwort: Re: barebox JSON   Sascha Hauer
      • Antwort: Re: Antwort: Re: barebox JSON   christian.buettner at rafi.de
      • Antwort: Re: Antwort: Re: barebox JSON   Jean-Christophe PLAGNIOL-VILLARD
      • Antwort: Re: Antwort: Re: Antwort: Re: barebox JSON   christian.buettner at rafi.de
      • Antwort: Re: Antwort: Re: Antwort: Re: barebox JSON   Jean-Christophe PLAGNIOL-VILLARD
      • barebox JSON   Eric Bénard
      • Antwort: Re: barebox JSON   christian.buettner at rafi.de
      • tftpserver   christian.buettner at rafi.de
      • tftpserver   Jean-Christophe PLAGNIOL-VILLARD
      • tftpserver   Franck Jullien
      • Antwort: Re: Antwort: Re: barebox JSON   christian.buettner at rafi.de
      • Antwort: Re: Antwort: Re: barebox JSON   Jean-Christophe PLAGNIOL-VILLARD
• Using the 'netconsole'   Juergen Beisert
• Yaffs2 support in barebox   Patrick
  • Yaffs2 support in barebox   Sascha Hauer
• [PATCH 0/6] mci: pxamci fixes   Robert Jarzmik
  • [PATCH 1/6] mci: pxamci define timeouts   Robert Jarzmik
  • [PATCH 2/6] mci: pxamci change clocks handling   Robert Jarzmik
  • [PATCH 3/6] mci: pxamci fix response type   Robert Jarzmik
  • [PATCH 4/6] mci: pxamci fix CMD12 handling   Robert Jarzmik
  • [PATCH 5/6] mci: pxamci fix R1b responses   Robert Jarzmik
  • [PATCH 6/6] mci: pxamci poweron ramp delay   Robert Jarzmik
  • [PATCH 0/6] mci: pxamci fixes   Sascha Hauer
• [PATCH] mtd: docg3 fixes backport from Linux kernel   Robert Jarzmik
• [PATCH] filetype: Make it work on files < 512 bytes   Sascha Hauer
• 800x480 Display broken on i.MX25 with MMU   Eric Bénard
  • 800x480 Display broken on i.MX25 with MMU   Sascha Hauer
• bootm fixes   Steffen Trumtrar
  • [PATCH 1/2] bootm: Fix check for ret-value   Steffen Trumtrar
  • [PATCH 2/2] bootm: Align oftree   Steffen Trumtrar
  • bootm fixes   Sascha Hauer
• [PATCH 0/5 v2] introduce binfmt support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/5] filetype: add Bourne Shell support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/5 v2] Introduce binfmt support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 3/5] bootm: add uimage binfmt support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 4/5 v2] arm: bootm: add barebox, zImage and aImage binfmt support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 5/5] defaultenv: add binfmt support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 0/5 v2] introduce binfmt support   Sascha Hauer
• [PATCH 0/3] fixes   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/3] arm: bootm: zImage: add error message when can not request the memory   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/3] dhcp: fix typo introduce during rebase of hostname patch   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 3/3] config: fix missing switch machine to hostname during merge   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 0/3] fixes   Sascha Hauer
• [PATCH] Allow use platform_ide driver without ALT-registers   Alexander Shiyan
  • [PATCH] Allow use platform_ide driver without ALT-registers   Sascha Hauer
• [PATCH] Merge silicon definitions i.MX35, i.MX51 and i.MX53   Alexander Shiyan
  • [PATCH] Merge silicon definitions i.MX35, i.MX51 and i.MX53   Sascha Hauer
• [PATCH 00/11 v2] improve complete support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 01/11] stringlist: use seperately allocated string   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 02/11] stringlist: implement string_list_add_asprintf   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 03/11] complete: add var and device param complete support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 04/11] complete: add generic command complete framework   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 05/11] complete: add device name complete support for devinfo   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 06/11] complete: add help complete support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 07/11] complete: add empty complete support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 08/11] complete: add eth interface complete support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 09/11] complete: add go and sleep support   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 09/11] complete: add go and sleep support   Sascha Hauer
      • [PATCH 09/11] complete: add go and sleep support   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 09/11] complete: add go and sleep support   Sascha Hauer
      • [PATCH 09/11] complete: add go and sleep support   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 09/11] complete: add go and sleep support   Sascha Hauer
  • [PATCH 10/11] complete: add delpart complete support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 11/11] complete: add executable file support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 00/11 v2] improve complete support   Sascha Hauer
    • [PATCH 00/11 v2] improve complete support   Jean-Christophe PLAGNIOL-VILLARD
• New user - having a few issues with MMC   George Pontis
  • New user - having a few issues with MMC   Sascha Hauer
• New user: need a hand booting the kernel from NAND   George Pontis
  • New user: need a hand booting the kernel from NAND   Sascha Hauer
  • New user: need a hand booting the kernel from NAND   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] some minor fixes for the netX arch   Juergen Beisert
  • [PATCH 3/6] netX: adapt it to the current boot spec   Juergen Beisert
  • [PATCH 5/6] netX: make the host interface macros compile   Juergen Beisert
  • [PATCH] some minor fixes for the netX arch   Sascha Hauer
• [PATCH 1/6] netX: just a style fix   Juergen Beisert
• [PATCH 2/6] netX: use correct sized pointers   Juergen Beisert
• [PATCH 4/6] netX: add more common permissions   Juergen Beisert
• [PATCH 6/6] netX: ignoring temporary netx build tool   Juergen Beisert
• ARM page 0 set for page fault   Krzysztof Halasa
  • ARM page 0 set for page fault   Sascha Hauer
• [PATCH 1/2] usb: fix driver name   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] menu: fix non command management support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/10] IXP4xx rebase WIP   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 01/10] ARM: add support of in_be16/32 and out_be16/32   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 02/10] ARM: Add support for IXP4xx CPU   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 03/10] ARM: Add support for IXP4xx Network Process Engine and queue Manager support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 04/10] net: Add support for IXP4xx ethernet support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 05/10] ixp4xx: add gpio support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 06/10] ixp4xx: add generic board lowlevel_init   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 07/10] ARM: Add support for Linksys NSLU2 support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 08/10] ARM: Add support for Goramo Multilink router platform.   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 09/10] nslu2: NPE-B firmware + boot script   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 10/10] multilink: NPE-B firmware + boot script   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 00/10] IXP4xx rebase WIP   Sascha Hauer
    • [PATCH 00/10] IXP4xx rebase WIP   Krzysztof Halasa
• [PATCH 1/2] menu: fix support for "\n", "\n\r" and "\r"   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] menu: fix menu alloc init   Jean-Christophe PLAGNIOL-VILLARD
• [PULL] fixes   Jean-Christophe PLAGNIOL-VILLARD
  • [PULL] fixes   Sascha Hauer
• device parameter patches   Sascha Hauer
• [PATCH 1/3] param: make return value of param getter function const   Sascha Hauer
• [PATCH 2/3] devinfo: use accessor function for parameters   Sascha Hauer
• [PATCH 3/3] dev_add_param: check if param exists already   Sascha Hauer
• [PATCH] common: memory: fix off-by-one in tlsf_create   Marc Kleine-Budde
  • [PATCH] common: memory: fix off-by-one in tlsf_create   Sascha Hauer
• [FIXES Master] tny-a926x fixes   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/2] at91: at91_register_uart use number instead of IDs   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/2] tny-a926x: fix MOB-TNY-MD2 Motherboard support   Jean-Christophe PLAGNIOL-VILLARD
  • [FIXES Master] tny-a926x fixes   Sascha Hauer
• [PATCH] MIPS: start.S: clean up whitespaces   Antony Pavlov
  • [PATCH] MIPS: start.S: clean up whitespaces   Sascha Hauer
• SHURE MICROPHONE与您共享了照片   SHURE MICROPHONE
• [FIXES Master] some fixes in the next which are for master too   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] PCM038: Added config option for PCM970 development board   Alexander Shiyan
  • [PATCH] PCM038: Added config option for PCM970 development board   Sascha Hauer
    • Re[2]: [PATCH] PCM038: Added config option for PCM970 development board   Alexander Shiyan
• initramfs   George Pontis
  • initramfs   Sascha Hauer
• [PATCH 1/2] Disallow to selecting MCI_IMX_ESDHC for i.MX27 & i.MX31 targets   Alexander Shiyan
  • [PATCH 2/2] PCM038: choose boot device by parsing barebox_loc magic variable   Alexander Shiyan
  • [PATCH 1/2] Disallow to selecting MCI_IMX_ESDHC for i.MX27 & i.MX31 targets   Sascha Hauer
• [PATCH] Increase heapsize for i.MX21ADS board again.   Jaccon Bastiaansen
  • [PATCH] Increase heapsize for i.MX21ADS board again.   Sascha Hauer
    • [PATCH] Increase heapsize for i.MX21ADS board again.   Jaccon Bastiaansen
  • [PATCH] Increase heapsize for i.MX21ADS board again.   Jaccon Bastiaansen
    • [PATCH] Increase heapsize for i.MX21ADS board again.   Sascha Hauer
• TI AM180x SoC support   斗破苍穷
  • TI AM180x SoC support   Jan Lübbe
• [PATCH] netX: fixes, cleanups, helpers and a new platform: THLINK-ETH   Juergen Beisert
  • [PATCH 1/7] netX: add a few base addresses for non on chip devices   Juergen Beisert
  • [PATCH 2/7] netX: unify the device registration   Juergen Beisert
  • [PATCH 3/7] netX: UART may not initialize correctly.   Juergen Beisert
  • [PATCH 4/7] netX/network: fix debug outputs   Juergen Beisert
  • [PATCH 5/7] netX: XPEC firmware is always of attribute const   Juergen Beisert
  • [PATCH 6/7] netX: don't bother with variable sizes, use the intend   Juergen Beisert
  • [PATCH 7/7] netX: add the 'th link' platform   Juergen Beisert
    • [PATCH 7/7] netX: add the 'th link' platform   Sascha Hauer
• imx35_nand driver   Gabriel Tisan
  • imx35_nand driver   Sascha Hauer
    • imx35_nand driver   Gabriel Tisan
• Gioca con noi   win4buy
• [RFC 1/2] MIPS: start.S: add "barebox" label at _start + 8   Antony Pavlov
  • [RFC 2/2] MIPS: bootm: add "MIPS barebox" handler   Antony Pavlov
  • [RFC 1/2] MIPS: start.S: add "barebox" label at _start + 8   Antony Pavlov
    • [RFC 1/2] MIPS: start.S: add "barebox" label at _start + 8   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] Makefile: add barebox.srec to 'clean'   Antony Pavlov
  • Re: [PATCH] Makefile: add barebox.srec to 'clean'   Alexander Shiyan
    • [PATCH] Makefile: add barebox.srec to 'clean'   Sascha Hauer
  • [PATCH] Makefile: add barebox.srec to 'clean'   Sascha Hauer
• hush fixes and cleanups   Sascha Hauer
  • [PATCH 01/13] hush: safe indention level by continueing a loop   Sascha Hauer
  • [PATCH 02/13] hush: safe an indention level by continueing a loop   Sascha Hauer
  • [PATCH 03/13] hush: cleanup coding style   Sascha Hauer
  • [PATCH 05/13] hush: run_pipe_real must have num_progs == 1   Sascha Hauer
  • [PATCH 06/13] hush: run_pipe_real: bail out early to safe an indention level   Sascha Hauer
  • [PATCH 07/13] hush: remove quotes at end of processing   Sascha Hauer
  • [PATCH 08/13] hush: simplify globhack   Sascha Hauer
  • [PATCH 10/13] glob: activate GLOB_NOCHECK flag   Sascha Hauer
  • [PATCH 11/13] hush: Fix globbing   Sascha Hauer
  • [PATCH 12/13] hush: allow to run interactive shell in do_sh   Sascha Hauer
  • [PATCH 13/13] defaultenv: remove now unnecessary hush-hack   Sascha Hauer
• [PATCH 04/13] hush: remove bogus 'else'   Sascha Hauer
• [PATCH 09/13] hush: pass GLOB_NOCHECK to glob   Sascha Hauer
• misc patches   Sascha Hauer
  • [PATCH 1/4] edit: Add proper screen size handling   Sascha Hauer
  • [PATCH 2/4] remove dlmalloc.src   Sascha Hauer
  • [PATCH 3/4] dhcp: set start time   Sascha Hauer
  • [PATCH 4/4] tlsf_malloc: return valid pointer for malloc(0)   Sascha Hauer
• [PATCH] bootm: fix initrd handling   Sascha Hauer
• [PATCH 0/3] qemu-malta nor flash support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/3] mips: add in_be16/32 and out_be16/32 for cfi support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/3] qemu-malta: rename serial.c to init.c   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 3/3] qemu-malta: add nor flash support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/11 v3] improve complete support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 01/11] stringlist: use seperately allocated string   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 02/11] stringlist: implement string_list_add_asprintf   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 03/11] complete: add var and device param complete support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 04/11] complete: add generic command complete framework   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 05/11] complete: add device name complete support for devinfo   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 06/11] complete: add help complete support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 07/11] complete: add empty complete support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 08/11] complete: add eth interface complete support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 09/11] complete: add go and sleep support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 10/11] complete: add delpart complete support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 11/11] complete: add executable file support   Jean-Christophe PLAGNIOL-VILLARD

Last message date: Mon Apr 30 11:25:27 EDT 2012
Archived on: Mon Apr 30 11:46:32 EDT 2012

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...