New user - having a few issues with MMC

[Sascha Hauer]

On Wed, Apr 18, 2012 at 11:32:41PM -0700, George Pontis wrote:
> Hi fellow barebox users. What a great loader, thanks to all of you for
> sharing your work on this.
> 
>  
> 
> I've brought barebox up on a custom at91sam9g45 board that has both NOR and
> NAND flash, and one SD card connected to the MMC interface. I was previously
> using all these with an older version of u-boot and in Linux, so I am pretty
> sure that the hardware is working properly. 
> 
>  
> 
> For some reason, I can't access any files on a 4G SD card. After booting
> into barebox, there is a /dev/disk0. I can mount it without error, for
> example mount /dev/disk0 fat /mmc. But ls /mmc does not show any content,
> and I know that there are many files there. The card is not partitioned.
> Have I overlooked something ? If not, any suggestions where to look for the
> cause of the problem ?

Sorry, barebox currently can't access anything > 4GB and some pieces may
have problems with 2GB. Please try either a smaller SD Card or add
partition your SD card and add a partition smaller than 2GB.
This is being worked on. Hopefully we have support for bigger SD cards
soon.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |