November 2011 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Tue Nov 1 06:09:36 EDT 2011
Ending: Wed Nov 30 17:06:13 EST 2011
Messages: 307

• [RFC PATCH 0/9] Catch-up/clean-up doxygen documentation   Mark Vels
  • [PATCH 5/9] trivial: De-orphan NAND doxygen output and fix @param syntax   Mark Vels
  • [PATCH 9/9] help: update of shell commands doxygen/online help documentation   Mark Vels
  • [RFC PATCH 0/9] Catch-up/clean-up doxygen documentation   Sascha Hauer
    • [RFC PATCH 0/9] Catch-up/clean-up doxygen documentation   Mark Vels
      • [RFC PATCH 0/9] Catch-up/clean-up doxygen documentation   Sascha Hauer
• [PATCH 1/9] trivial: relocate doxygen help page for time command   Mark Vels
• [PATCH 2/9] trivial: relocate doxygen help page for led command   Mark Vels
• [PATCH 3/9] trivial: reorganize crc32 command doxygen output   Mark Vels
• [PATCH 4/9] trivial: fix doxygen error in dlink-dir-320.dox   Mark Vels
• [PATCH 6/9] docs: Enable BAREBOX_CMD_HELP_TEXT() in generated documentation   Mark Vels
• [PATCH 7/9] doxygen: Enable LONGHELP output in generated output   Mark Vels
• [PATCH 8/9] trivial: Small change in page link title   Mark Vels
• Failed to launch barebox from flash memory on i.MX35   Sascha Hauer
  • Issue when building Barebox with ARM EABI 4.4.3   Loc Nguyen
  • Failed to launch barebox from flash memory on i.MX35   Peter Kuennemann at Crane-Soft
    • Failed to launch barebox from flash memory on i.MX35   Sascha Hauer
    • Failed to launch barebox from flash memory on i.MX35   Peter Kuennemann at Crane-Soft
• Error when building Barebox with arm-eabi 4.4.3   Loc Nguyen
• [PATCH] ARM i.MX53: enable l2 cache   Sascha Hauer
• [PATCH] arm:imx27: add basic support for KaRo TX27 module on StarterKit 5   Mark Vels
  • [PATCH] arm:imx27: add basic support for KaRo TX27 module on StarterKit 5   Mark Vels
    • [PATCH] arm:imx27: add basic support for KaRo TX27 module on StarterKit 5   Sascha Hauer
      • [PATCH] arm:imx27: add basic support for KaRo TX27 module on StarterKit 5   Mark Vels
      • [PATCH] arm:imx27: add basic support for KaRo TX27 module on StarterKit 5   Sascha Hauer
• [RFC] mount: Fix the printing of device name   franck.jullien at gmail.com
  • [RFC] mount: Fix the printing of device name   Sascha Hauer
    • [RFC] mount: Fix the printing of device name   Franck JULLIEN
• [PATCH] OMAP gpmc nand   Sascha Hauer
  • [PATCH 01/10] mtd nand omap: use blocknum calculation to where it's used   Sascha Hauer
  • [PATCH 02/10] mtd nand omap: factor out bch correct function   Sascha Hauer
  • [PATCH 03/10] mtd nand omap: factor out hamming correct function   Sascha Hauer
  • [PATCH 04/10] mtd nand omap: call ecc calculate function outside omap_correct_bch   Sascha Hauer
  • [PATCH 06/10] mtd nand omap: use register defines for ecc registers   Sascha Hauer
  • [PATCH 08/10] mtd nand omap: factor out an internal __omap_calculate_ecc function   Sascha Hauer
  • [PATCH 09/10] mtd nand omap: add read function for the OMAP4 romcode ecc mode   Sascha Hauer
• [PATCH 05/10] mtd nand omap: fail on bch decode failure   Sascha Hauer
• [PATCH 07/10] mtd nand omap: make debugging output more useful   Sascha Hauer
• [PATCH 10/10] mtd nand omap: use NAND_OWN_BUFFERS option   Sascha Hauer
• module   Renaud Barbier
  • moduleg   Sascha Hauer
• Try to fix mount display of a disk   franck.jullien at gmail.com
  • [PATCH 1/2] ata: Add dev ref to blockdevice during probe   franck.jullien at gmail.com
  • [PATCH 2/2] [RFC v2] mount: Fix the printing of device name   franck.jullien at gmail.com
  • Try to fix mount display of a disk   Sascha Hauer
• v2011.11.0   Sascha Hauer
• [PATCH] at91: add config option for ohci driver   Hubert Feurstein
  • [PATCH] at91: add config option for ohci driver   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH] at91: add config option for ohci driver   Hubert Feurstein
  • [PATCH] at91: add config option for ohci driver   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH] at91: add config option for ohci driver   Sascha Hauer
• [PATCH 0/4] Fixes for x86   Lucas De Marchi
  • [PATCH 1/4] Make fprintf return number of bytes written   Lucas De Marchi
    • [PATCH 1/4] Make fprintf return number of bytes written   Marc Kleine-Budde
      • [PATCH 1/4] Make fprintf return number of bytes written   Lucas De Marchi
      • [PATCH 1/4] Make fprintf return number of bytes written   Marc Kleine-Budde
    • [PATCH 1/4] Make fprintf return number of bytes written   Sascha Hauer
      • [PATCH 1/4] Make fprintf return number of bytes written   Lucas De Marchi
  • [PATCH 2/4] Add setupmbr to gitignore   Lucas De Marchi
  • [PATCH 3/4] x86: fix build error because of missing header   Lucas De Marchi
  • [PATCH 4/4] x86: fix symbol size calculation   Lucas De Marchi
  • [PATCH 0/4] Fixes for x86   Sascha Hauer
• [PATCH v3] omap: Unify run_shell() in xload configuration   Premi, Sanjeev
  • [PATCH v3] omap: Unify run_shell() in xload configuration   Sascha Hauer
  • [PATCH v3] omap: Unify run_shell() in xload configuration   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: mx53-loco: Remove duplicate call to loco_fec_reset()   Fabio Estevam
  • [PATCH] ARM: mx53-loco: Remove duplicate call to loco_fec_reset()   Sascha Hauer
• hi everyone about   lantian5435
• [PATCH] Remove md5,sh1,sh2 from lib/Makefile.   Juergen Kilb
  • [PATCH] Remove md5,sh1,sh2 from lib/Makefile.   Jean-Christophe PLAGNIOL-VILLARD
    • Antwort: Re: [PATCH] Remove md5,sh1,sh2 from lib/Makefile.   Jürgen Kilb
• [PATCH] mci multiblock write   Sascha Hauer
  • [PATCH 1/2] mci: implement multi block write   Sascha Hauer
    • [PATCH 1/2] mci: implement multi block write   Belisko Marek
      • [PATCH 1/2] mci: implement multi block write   Sascha Hauer
  • [PATCH 2/2] mci: remove unnecessary loops   Sascha Hauer
• small fixes   Sascha Hauer
• [PATCH 1/2] mkdir command: do not fail with -p and directory already exists   Sascha Hauer
• [PATCH 2/2] export: do not fail on already exported variable   Sascha Hauer
• Barebox newbie questions : arch/arm/{plat,mach} split and interrupts   Robert Jarzmik
  • Barebox newbie questions : arch/arm/{plat,mach} split and interrupts   Sascha Hauer
  • Barebox newbie questions : arch/arm/{plat, mach} split and interrupts   Antony Pavlov
• Problem with long files name in FAT   Franck JULLIEN
  • [PATCH] fs/fat: Initialize local variable finfo   franck.jullien at gmail.com
    • [PATCH] fs/fat: Initialize local variable finfo   Sascha Hauer
• [PATCH/next] x86: Provide 'unaligned' macros for x86 arch as well   Juergen Beisert
  • [PATCH/next] x86: Provide 'unaligned' macros for x86 arch as well   Sascha Hauer
• [PATCH/next] Mini2440: Everything's now present to provide USB host feature   Juergen Beisert
• Rework of handling disk like media   Juergen Beisert
  • [PATCH 05/13] ATA/DISK: Reorganize file structure and names for future updates   Juergen Beisert
    • [PATCH 05/13] ATA/DISK: Reorganize file structure and names for future updates   Juergen Beisert
    • [PATCH 05/13] ATA/DISK: Reorganize file structure and names for future updates   Juergen Beisert
  • [PATCH 06/13] ATA/DISK: The BIOS based disk driver is not an interface   Juergen Beisert
  • [PATCH 08/13] DISK: Add common partition handling for disk like media   Juergen Beisert
    • [PATCH 08/13] DISK: Add common partition handling for disk like media   Sascha Hauer
      • [PATCH 08/13] DISK: Add common partition handling for disk like media   Juergen Beisert
      • [PATCH 08/13] DISK: Add common partition handling for disk like media   Sascha Hauer
      • [PATCH 08/13] DISK: Add common partition handling for disk like media   Juergen Beisert
      • [PATCH 08/13] DISK: Add common partition handling for disk like media   Juergen Beisert
  • [PATCH 09/13] Use generic block layer to access the drives and do partition parsing   Juergen Beisert
    • [PATCH 09/13] Use generic block layer to access the drives and do partition parsing   Sascha Hauer
  • [PATCH 10/13] Remove 'disk_drive.c' as it is now replaced by generic partition handling   Juergen Beisert
  • [PATCH 11/13] ATA/DISK: Remove the now unused header <ata.h>   Juergen Beisert
    • [PATCH 11/13] ATA/DISK: Remove the now unused header <ata.h>   Juergen Beisert
  • [PATCH 12/13] ATA Disk Support: Add support for native ATA type drives   Juergen Beisert
    • [PATCH 12/13] ATA Disk Support: Add support for native ATA type drives   Sascha Hauer
      • [PATCH 12/13] ATA Disk Support: Add support for native ATA type drives   Juergen Beisert
  • [PATCH 13/13] Add driver for IDE like interfaces   Juergen Beisert
• [PATCH 01/13] USB Mass Storage driver: Fix compile time warning   Juergen Beisert
  • [PATCH 01/13] USB Mass Storage driver: Fix compile time warning   Juergen Beisert
• [PATCH 02/13] Create a unique cdev number for on demand devices   Juergen Beisert
  • [PATCH 02/13] Create a unique cdev number for on demand devices   Juergen Beisert
• [PATCH 03/13] ATA/DISK: Add generic disk support when enabling the BIOS disk driver   Juergen Beisert
  • [PATCH 03/13] ATA/DISK: Add generic disk support when enabling the BIOS disk driver   Juergen Beisert
  • [PATCH 03/13] ATA/DISK: Add generic disk support when enabling the BIOS disk driver   Juergen Beisert
• [PATCH 04/13] ATA/DISK: Enabling write support does not belong to 'drive types'   Juergen Beisert
  • [PATCH 04/13] ATA/DISK: Enabling write support does not belong to 'drive types'   Juergen Beisert
• [PATCH 07/13] ATA/DISK: Share important constants and structures   Juergen Beisert
  • [PATCH 07/13] ATA/DISK: Share important constants and structures   Juergen Beisert
• Envfs embedded in barebox.bin   robert.jarzmik at free.fr
  • Envfs embedded in barebox.bin   Sascha Hauer
    • Envfs embedded in barebox.bin   robert.jarzmik at free.fr
• [PATCH] spi/altera_spi: Add cs_change support   Franck Jullien
• [PATCH] fix unlzo support   Sascha Hauer
  • [PATCH] fix unlzo support   Eric Bénard
• [PATCH] ARM i.MX53: silence compiler warning in nand.c   Sascha Hauer
• [RFC PATCH 1/2] commands/cp: add verbose mode which displays progress bar   Hubert Feurstein
  • [RFC PATCH 1/2] commands/cp: add verbose mode which displays progress bar   Jean-Christophe PLAGNIOL-VILLARD
  • [RFC PATCH 1/2] commands/cp: add verbose mode which displays progress bar   Sascha Hauer
    • [PATCH v2] commands/cp: add verbose mode which displays progress bar   Hubert Feurstein
      • [PATCH v3] commands/cp: add verbose mode which displays progress bar   Hubert Feurstein
• [PATCH] eeprom/at25: add erase support   Hubert Feurstein
  • [PATCH] eeprom/at25: add erase support   Sascha Hauer
    • [PATCH] eeprom/at25: add erase support   Hubert Feurstein
      • [PATCH] eeprom/at25: add erase support   Sascha Hauer
      • [PATCH] eeprom/at25: add erase support   Hubert Feurstein
• [PATCH v3] sandbox: move ELFCLASS detection to asm/elf.h   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] sanbox: add linux_execve and linux_exec command   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/1] sanbox: add linux_execve and linux_exec command   Sascha Hauer
• [PATCH 1/1] password: remove not used variable 'second'   Jean-Christophe PLAGNIOL-VILLARD
• [PATCHv2] Rework of handling disk like media   Juergen Beisert
  • [PATCH 06/13] ATA/DISK: The BIOS based disk driver is not an interface   Juergen Beisert
  • [PATCH 08/13] DISK: Add common partition handling for disk like media   Juergen Beisert
  • [PATCH 09/13] Use generic block layer to access the drives and do partition parsing   Juergen Beisert
  • [PATCH 10/13] Remove 'disk_drive.c' as it is now replaced by generic partition handling   Juergen Beisert
  • [PATCH 12/13] ATA Disk Support: Add support for native ATA type drives   Juergen Beisert
  • [PATCH 13/13] Add driver for IDE like interfaces   Juergen Beisert
• [PATCH] readkey: force return from while true   Jan Weitzel
  • [PATCH] readkey: force return from while true   Sascha Hauer
    • [PATCH] readkey: force return from while true   Marc Kleine-Budde
      • [PATCH v2] readkey: force return from while true   Jan Weitzel
• [PATCH 0/4] Add MCI over SPI support   franck.jullien at gmail.com
  • [PATCH 1/4] crypto: Add crc7 function   franck.jullien at gmail.com
  • [PATCH 2/4] mci: Add MCI over SPI support   franck.jullien at gmail.com
    • [PATCH 2/4] mci: Add MCI over SPI support   Sascha Hauer
  • [PATCH 3/4] nios2: Include asm/unaligned.h   franck.jullien at gmail.com
    • [PATCH 3/4] nios2: Include asm/unaligned.h   Sascha Hauer
  • [PATCH 4/4] spi/altera_spi: Add cs_change support   franck.jullien at gmail.com
• [PATCH 0/5] Enable a console over a serial USB gadget   Robert Jarzmik
  • [PATCH 1/5] console: add console unregistering   Robert Jarzmik
  • [PATCH 2/5] usb/gadget: add pxa27x_udc driver   Robert Jarzmik
  • [PATCH 3/5] usb/gadget: use generic usb_gadget_poll() in u_serial   Robert Jarzmik
  • [PATCH 4/5] usb/gadget: add USB serial connect and disconnect   Robert Jarzmik
  • [PATCH 5/5] usb/gadget: make serial gadget resistant to cable unplug   Robert Jarzmik
• [PATCH 0/9] Initial PXA support and Mitac MIOA701 board   Robert Jarzmik
  • [PATCH 1/9] initial Intel/Marvell PXA support   Robert Jarzmik
    • [PATCH 1/9] initial Intel/Marvell PXA support   Sascha Hauer
      • [PATCH 1/9] initial Intel/Marvell PXA support   Robert Jarzmik
  • [PATCH 2/9] fix association of cache handling code for PXA   Robert Jarzmik
  • [PATCH 3/9] fix core version selection   Robert Jarzmik
  • [PATCH 4/9] add PXA framebuffer support   Robert Jarzmik
  • [PATCH 5/9] drivers: pxafb: Fix IOMEM API evolution   Robert Jarzmik
  • [PATCH 6/9] drivers: pxafb: add include ifdefery   Robert Jarzmik
  • [PATCH 7/9] arm/mach-pxa: add gpio direction functions   Robert Jarzmik
  • [PATCH 8/9] arm/mach-pxa: add basic devices hooks   Robert Jarzmik
  • [PATCH 9/9] arm/mach-pxa: add mioa701 board   Robert Jarzmik
    • [PATCH 9/9] arm/mach-pxa: add mioa701 board   Marc Kleine-Budde
      • [PATCH 9/9] arm/mach-pxa: add mioa701 board   Robert Jarzmik
    • [PATCH 9/9] arm/mach-pxa: add mioa701 board   Sascha Hauer
      • [PATCH 9/9] arm/mach-pxa: add mioa701 board   Robert Jarzmik
      • [PATCH 9/9] arm/mach-pxa: add mioa701 board   Sascha Hauer
      • [PATCH 9/9] arm/mach-pxa: add mioa701 board   Robert Jarzmik
  • [PATCH 0/9] Initial PXA support and Mitac MIOA701 board   Marc Kleine-Budde
    • [PATCH 0/9] Initial PXA support and Mitac MIOA701 board   Sascha Hauer
    • [PATCH 0/9] Initial PXA support and Mitac MIOA701 board   Robert Jarzmik
• ARM, MMU and IO space mapping   Robert Jarzmik
  • ARM, MMU and IO space mapping   Sascha Hauer
    • ARM, MMU and IO space mapping   Marc Kleine-Budde
    • ARM, MMU and IO space mapping   Robert Jarzmik
      • ARM, MMU and IO space mapping   Marc Kleine-Budde
      • ARM, MMU and IO space mapping   Sascha Hauer
      • ARM, MMU and IO space mapping   Robert Jarzmik
      • ARM, MMU and IO space mapping   Sascha Hauer
      • ARM, MMU and IO space mapping   Robert Jarzmik
      • ARM, MMU and IO space mapping   Sascha Hauer
      • ARM, MMU and IO space mapping   Robert Jarzmik
• [PATCHv3] Rework of handling disk like media   Juergen Beisert
  • [PATCH 01/13] USB Mass Storage driver: Fix compile time warning   Juergen Beisert
  • [PATCH 02/13] Create a unique cdev number for on demand devices   Juergen Beisert
  • [PATCH 04/13] ATA/DISK: Enabling write support does not belong to 'drive types'   Juergen Beisert
  • [PATCH 06/13] ATA/DISK: The BIOS based disk driver is not an interface   Juergen Beisert
  • [PATCH 07/13] ATA/DISK: Share important constants and structures   Juergen Beisert
  • [PATCH 08/13] DISK: Add common partition handling for disk like media   Juergen Beisert
    • [PATCH 08/13] DISK: Add common partition handling for disk like media   Erwin Rol
  • [PATCH 09/13] Use generic block layer to access the drives and do partition parsing   Juergen Beisert
  • [PATCH 10/13] Remove 'disk_drive.c' as it is now replaced by generic partition handling   Juergen Beisert
  • [PATCH 11/13] ATA/DISK: Remove the now unused header <ata.h>   Juergen Beisert
  • [PATCH 12/13] ATA Disk Support: Add support for native ATA type drives   Juergen Beisert
    • [PATCH 12/13] ATA Disk Support: Add support for native ATA type drives   Juergen Beisert
  • [PATCH 13/13] Add driver for IDE like interfaces   Juergen Beisert
• [PATCH] atmel_spi: add mesg->actual_length, so devices can use it for read/write   Michael Grzeschik
  • [PATCH] atmel_spi: add mesg->actual_length, so devices can use it for read/write   Hubert Feurstein
• [PATCH] m25p80: set the correct erasesize when we use OPCODE_BE_4K   Michael Grzeschik
• [PATCH 0/3] Add MCI over SPI support   franck.jullien at gmail.com
  • [PATCH 1/3] crypto: Add crc7 function   franck.jullien at gmail.com
  • [PATCH 2/3 v2] mci: Add MCI over SPI support   franck.jullien at gmail.com
  • [PATCH 3/3] spi/altera_spi: Add cs_change support   franck.jullien at gmail.com
  • [PATCH 0/3] Add MCI over SPI support   Sascha Hauer
• next branch compilation errors   Belisko Marek
  • next branch compilation errors   Sascha Hauer
    • next branch compilation errors   Belisko Marek
• [PATCH V2 0/3] Initial PXA support and Mitac MIOA701 board   Robert Jarzmik
  • [PATCH V2 1/3] arm/mach-pxa: Initial Intel/Marvell PXA support   Robert Jarzmik
    • [PATCH V2 1/3] arm/mach-pxa: Initial Intel/Marvell PXA support   Marc Kleine-Budde
      • [PATCH V2 1/3] arm/mach-pxa: Initial Intel/Marvell PXA support   Robert Jarzmik
  • [PATCH V2 2/3] drivers/video: add PXA framebuffer support   Robert Jarzmik
  • [PATCH V2 3/3] arm/mach-pxa: add mioa701 board   Robert Jarzmik
• [PATCH] arm: trivial renaming create_sections   Robert Jarzmik
• Current Barebox/Next and GCC-4.6.2   Juergen Beisert
  • Current Barebox/Next and GCC-4.6.2   Sascha Hauer
• Mini2440: Fix leftover from A9M2440 copy   Juergen Beisert
• S3C24XX: Fix wrong RTS behaviour   Juergen Beisert
• [RFC] Prepare to add more Samsung S3C CPUs to barebox   Juergen Beisert
  • [PATCH 01/14] MACH SAMSUNG: Rename the whole mach to add more CPUs in future   Juergen Beisert
  • [PATCH 02/14] MACH SAMSUNG/S3C: Do not compile S3C24xx's GPIO support unconditionally   Juergen Beisert
  • [PATCH 03/14] MACH SAMSUNG/S3C: Make it more generic for future updates   Juergen Beisert
  • [PATCH 04/14] MACH SAMSUNG/S3C: Use the correct CPU family name to reflect driver's usage   Juergen Beisert
  • [PATCH 05/14] MACH SAMSUNG/S3C: The SDHC driver can be shared in the S3C CPU family   Juergen Beisert
  • [PATCH 06/14] MACH SAMSUNG/S3C: Reflect the CPU name the LCD driver is for   Juergen Beisert
  • [PATCH 07/14] MACH SAMSUNG/S3C: Separate S3C24XX clock management   Juergen Beisert
  • [PATCH 08/14] MACH SAMSUNG/S3C: Separate the clocksource for the S3C family   Juergen Beisert
  • [PATCH 09/14] MACH SAMSUNG/S3C: Rename register macros to reflect the MACH they are valid for   Juergen Beisert
    • [PATCH 09/14] MACH SAMSUNG/S3C: Rename register macros to reflect the MACH they are valid for   Sascha Hauer
  • [PATCH 10/14] MACH SAMSUNG/S3C: Re-work the S3C family timer driver   Juergen Beisert
  • [PATCH 11/14] MACH SAMSUNG/S3C: Prepare watchdog unit to be shared in the S3C family   Juergen Beisert
  • [PATCH 12/14] MACH SAMSUNG/S3C: Unify the UART driver for the S3C family of CPUs   Juergen Beisert
  • [PATCH 13/14] MACH SAMSUNG/S3C: Re-work the memory detection and handling   Juergen Beisert
  • [PATCH 14/14] MACH SAMSUNG/S3C: Re-work the GPIO handling for S3C24xx CPUs   Juergen Beisert
• [PATCH] magic variables   Sascha Hauer
  • [PATCH 1/5] add magicvar command   Sascha Hauer
  • [PATCH 4/5] hush: Add magicvars   Sascha Hauer
  • [PATCH 5/5] dhcp: Add magicvars   Sascha Hauer
• [PATCH 2/5] bootm: Add bootargs magicvar   Sascha Hauer
• [PATCH 3/5] ARM i.MX boot: Add barebox_loc magicvar   Sascha Hauer
• [PATCH 1/2] remove irq support fragments   Sascha Hauer
• [PATCH 2/2] MAKEALL: use '.' instead of 'source'   Sascha Hauer
• bootm work   Sascha Hauer
  • [PATCH 01/14] bootm: remove dead code   Sascha Hauer
  • [PATCH 02/14] factor out iminfo command   Sascha Hauer
  • [PATCH 03/14] compile in simple_strtoull   Sascha Hauer
  • [PATCH 04/14] introduce some env helpers   Sascha Hauer
  • [PATCH 05/14] armlinux: cleanup linux vars   Sascha Hauer
    • [PATCH 05/14] armlinux: cleanup linux vars   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 05/14] armlinux: cleanup linux vars   Sascha Hauer
      • [PATCH 05/14] armlinux: cleanup linux vars   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 05/14] armlinux: cleanup linux vars   Robert Schwebel
      • [PATCH 05/14] armlinux: cleanup linux vars   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 05/14] armlinux: cleanup linux vars   Sascha Hauer
  • [PATCH 06/14] ARM bootm: remove now obsolete args   Sascha Hauer
  • [PATCH 07/14] bootm: handle initrds inline   Sascha Hauer
  • [PATCH 08/14] bootm: remove image handler options   Sascha Hauer
  • [PATCH 09/14] bootm: fix various memory leaks   Sascha Hauer
  • [PATCH 10/14] bootm: do not require -L after -r   Sascha Hauer
  • [PATCH 11/14] bootm: fix typo, update help str   Sascha Hauer
    • [PATCH 11/14] bootm: fix typo, update help str   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 12/14] bootm relocate_image: honour load_address   Sascha Hauer
  • [PATCH 13/14] bootm: push relocate_image up to the generic command   Sascha Hauer
  • [PATCH 14/14] bootm: use initrd_address and initrd_size   Sascha Hauer
• mmc spi fixes   Sascha Hauer
  • [PATCH 1/2] mmc spi: add missing dependency on SPI   Sascha Hauer
  • [PATCH 2/2] mmc spi: compile fix   Sascha Hauer
    • [PATCH 2/2] mmc spi: compile fix   Franck JULLIEN
• [PATCH] nand: base: Improve error reporting if reading NAND-ID fails   Wolfram Sang
• Running Barebox in Barebox.   Renaud Barbier
  • Running Barebox in Barebox.   Sascha Hauer
• uncompress work   Sascha Hauer
  • [PATCH 01/16] armlinux: remove unnecessary include   Sascha Hauer
  • [PATCH 02/16] arm bootm: remove unnecessary include   Sascha Hauer
  • [PATCH 03/16] scripts/mkimage.c: remove unnecessary include   Sascha Hauer
  • [PATCH 04/16] use kernel bunzip implementation   Sascha Hauer
  • [PATCH 05/16] remove old bzlib   Sascha Hauer
  • [PATCH 06/16] add kernel gunzip implementation   Sascha Hauer
  • [PATCH 07/16] remove old zlib   Sascha Hauer
  • [PATCH 08/16] lib: prompt for uncompression functions   Sascha Hauer
  • [PATCH 09/16] bootm: do not select uncompression methods   Sascha Hauer
  • [PATCH 10/16] add file detection support   Sascha Hauer
    • [PATCH 10/16] add file detection support   Marc Kleine-Budde
      • [PATCH 10/16] add file detection support   Sascha Hauer
    • [PATCH 10/16] add file detection support   Sascha Hauer
  • [PATCH 11/16] lzo: export decompress_unlzo function   Sascha Hauer
  • [PATCH 12/16] Add generic uncompress function   Sascha Hauer
  • [PATCH 13/16] add generic uncompress command   Sascha Hauer
  • [PATCH 14/16] update configs and default envs for uncompress   Sascha Hauer
  • [PATCH 15/16] remove now unused unlzo function   Sascha Hauer
  • [PATCH 16/16] bootm: use generic uncompress function   Sascha Hauer
• [PATCH 1/1] Increase heapsize for i.MX21ADS board.   Jaccon Bastiaansen
• lib/md5.o build problem   Antony Pavlov

Last message date: Wed Nov 30 17:06:13 EST 2011
Archived on: Wed Nov 30 17:06:29 EST 2011

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...