[PATCH] arm:imx27: add basic support for KaRo TX27 module on StarterKit 5

[Mark Vels]

On 11-11-11 16:31, Sascha Hauer wrote:
> On Thu, Nov 10, 2011 at 11:34:27PM +0100, Mark Vels wrote:
>> On 11/03/2011 02:46 PM, Mark Vels wrote:
>>> This patch adds basic support for the TX27 CPU module.
>>> It has been tested so far using OpenOCD to write it into memory and execute.
>>> Environment loading and saving from NAND seems to work correctly, further
>>> testing will be focused on booting from NAND.
>>>
>>> Since I don't have any datasheets of the IIM in the i.MX27 I would appreciate
>>> some help with getting the serial number and the ethernet MAC from there. Can
>>> anyone shine some light here?
> I don't think that the i.MX27 has any MAC address in the IIM if the
> board manufacturer has programmed one.
kk, that explains. You think the same goes for the serial number?
I expected this to be preprogrammed during  silicon production but I may of course be wrong...
>>> Signed-off-by: Mark Vels<mark.vels at team-embedded.nl>
>>> ---
>> Anyone? No comments?
> The patch looks fine. Any reason not to use the default environment?
>
> Sascha
>
>
Yeah, it's probably called ignorance :-( I just copied other stuff from the tx25 over.
I'll have a look why the tx25 isn't using the generic defaultenv too, if I can't find any reason I'll submit a new patch.

Thanks, Mark