[PATCH 0/5] Enable a console over a serial USB gadget

[Robert Jarzmik]

This patchset aims at providing a working console over a USB port.
It includes:
 - a driver for PXA27x SoC UDC device
 - various fixes in the serial gadgets
 - a small evolution in the generic console to sustain a console unregistering
  (as when a USB cable is severed)

This serie was obviously tested on a XScale PX27x chip.

Cheers.

--
Robert

Robert Jarzmik (5):
  console: add console unregistering
  usb/gadget: add pxa27x_udc driver
  usb/gadget: use generic usb_gadget_poll() in u_serial
  usb/gadget: add USB serial connect and disconnect
  usb/gadget: make serial gadget resistant to cable unplug

 arch/arm/mach-pxa/include/mach/udc_pxa2xx.h |   26 +
 common/console.c                            |   24 +-
 common/console_simple.c                     |    4 +
 drivers/usb/gadget/Kconfig                  |    7 +
 drivers/usb/gadget/Makefile                 |    1 +
 drivers/usb/gadget/f_serial.c               |    5 +-
 drivers/usb/gadget/pxa27x_udc.c             | 1524 +++++++++++++++++++++++++++
 drivers/usb/gadget/pxa27x_udc.h             |  393 +++++++
 drivers/usb/gadget/u_serial.c               |   27 +-
 include/console.h                           |    1 +
 10 files changed, 1997 insertions(+), 15 deletions(-)
 create mode 100644 arch/arm/mach-pxa/include/mach/udc_pxa2xx.h
 create mode 100644 drivers/usb/gadget/pxa27x_udc.c
 create mode 100644 drivers/usb/gadget/pxa27x_udc.h

-- 
1.7.5.4