v2011.11.0
Sascha Hauer
s.hauer at pengutronix.de
Wed Nov 9 07:08:10 EST 2011
Finally v2011.11.0 is out. Here is what happened since the last release:
Alexander Shiyan (4):
Add "imx_get_i2cclk" for MX51
Add WEIM registers for MX51
Add 600Mhz freq defines for MX51
ID fix for mx51 SDHC2
Antony Pavlov (5):
generate barebox.srec
ehci-hcd.c: handle EHCI_HAS_TT in ehci_reset() during startup
fs: fix path_check_prereq()
fs: fix chdir()
usb: ehci-hcd.c: fix 'value computed is not used' warning
Fabian van der Werf (1):
Fixed unaligned access
Franck Jullien (1):
nios2: remove warnings generated by include/io.h
Hubert Feurstein (8):
macb: whitespace cleanup
macb: handle clk_get error
atmel_mci: handle clk_get error correctly
spi: add atmel-spi driver
at91sam9g45: add atmel-spi support
at91: add spi clock connection id entries
at91: add missing clkdev changes
at91sam9260ek: fix broken defconfig
Jan Weitzel (1):
add option LOCALVERSION to common/Kconfig
Jean-Christophe PLAGNIOL-VILLARD (13):
arm: export arch_number to env
at91: fix cpu clock speed display
at91: Fix uhpck clock rate in upll case
at91/boards: switch to software ecc as in linux kernel
resource: introduce add_generic_device_res to add multiple resource
at91: nand switch ecc base to resource
usb/core: make print dev like linux lsusb
at91: add ohci support
at91: add Calao USB-A960 and USB-A9G20 C01 & C11 board support
at91: add Calao USB-A9263
image: use data base addr for image_print_contents, image_multi_count/getimg
image: add multi image support for bootm
image: move map_image amd unmap_image to image.c
Juergen Beisert (3):
x86: Define byteorder
'bootz' command fails to load the zImage's header
Really fix the 'bootz' command
Juergen Kilb (3):
Add Reset Support for omap3.
Add omap_hsmmc platform data.
Added helper function to get CS1 base address.
Loïc Minier (3):
Fix spelling of "omitted"; found by lintian
Only pass -P to cpp when generating ld scripts
Avoid warnings by using format(__printf__)
Marc Kleine-Budde (7):
defaultenv: simplify scripting
defaultenv: boot: add backwards compatibility for kernel_loc=net
defaultenv: boot: add eth0 to ip configuration
defaultenv: boot: add serverip to static ip configuration
defaultenv: boot: add support to boot from disk
defaultenv: update: add support to update kernel on disk
defaultenv: add config template
Paul Fertser (7):
imx_spi: rework transfer according to the API, fix compatibility with spi_write_then_read()
imx25: imx_spi: support CSPI v0.7 as found on i.MX25
mach-imx: iim: clarify documentation
mach-imx: iim: cosmetic changes to the code to make it easier to follow
spi: let master a chance to setup device before registering it
spi: enfore default bits_per_word value
spi: indicate in the docs that per-transfer bpw setting is not supported
Robert Schwebel (2):
menu: fix alinment
mci-core: fix typo for pr_warn
Rosen Kolev (4):
Modified timeout in the ehci-hcd USB host driver.
Extended USB device matching.
USB mass storage device driver initial implementation
Allow data-only i2c transfers
Sascha Hauer (43):
usb: honour timeout fields
initial ohci support
i.MX NAND: pass second base address as resource
introduce io.h
introduce asm-generic/io.h
arm: use asm-generic/io.h
drivers/base: fix wrong variable type
add cpu native ordered io accessors
cfi flash: use cpu native accessors
ppc pcm030: remove puts in early init
cfi flash: fix flash_make_cmd for big endian access
rename include/mem_malloc.h to include/memory.h
ARM mmu: find second level descriptors by walking the page table
introduce generic memory bank handling
ARM: switch to generic memory banks
sandbox: make asm/io.h nonempty
ppc: remove mgt5100 support from code
ppc: add a get_pc() function
remove EARLY_INIT and EARLY_CONSOLE support
ppc mpc5200: add function to determine configured sdram size
ppc mpc5200: add function to configure a chipselect
ppc mpc5200: add function to setup bus clocks
ppc mpc5200b: cleanup lowlevel startup
pcm030: use new functionality
ppc: hardcode sdram base to 0x0
mpc5200: hardcode MBAR to 0xf0000000
mpc5200: hardcode internal sram for initram
pcm030: fix /dev/self0 and /dev/env0
ppc mpc5200: remove bus clock switching from generic code
pcm030: cleanup config.h
ppc mpc5200: remove cs setup from cpu_init
ppc mpc5200: remove various board specific register setup from generic code
ppc common.h: remove unused function declarations
net fec_mpc5200: disable fec on shutdown
Merge branch 'usb-massstorage' into next
Merge branch 'pu-ppc' into next
Merge branch 'next'
mci omap: do not fail on nonexistent pdata
ARM panda: fix default env path in config
Merge branch 'pu/omap'
fix bug introduced with fixing path_check_prereq()
ARM pcm043: Use external bootmode
Release v2011.11.0
Thomas Petazzoni (2):
arm: at91: fix environment location in flash for multiple boards
arm: at91: Add Atmel NAND support in config for at91sam9m10g45ek
Wolfram Sang (3):
net: string_to_ip: add sanity check for > 255
net: getenv_ip: check return value of string_to_ip
defaultenv: place eth0.ethaddr more visibly
.gitignore | 1 +
Makefile | 7 +-
arch/arm/Kconfig | 2 +-
arch/arm/Makefile | 5 +-
arch/arm/boards/a9m2410/a9m2410.c | 2 +-
arch/arm/boards/a9m2440/a9m2410dev.c | 2 +-
arch/arm/boards/a9m2440/a9m2440.c | 2 +-
arch/arm/boards/at91rm9200ek/init.c | 2 +-
arch/arm/boards/at91sam9260ek/init.c | 6 +-
arch/arm/boards/at91sam9261ek/init.c | 3 +-
arch/arm/boards/at91sam9263ek/init.c | 6 +-
arch/arm/boards/at91sam9m10g45ek/init.c | 4 +-
arch/arm/boards/chumby_falconwing/falconwing.c | 2 +-
arch/arm/boards/edb93xx/edb93xx.c | 2 +-
arch/arm/boards/edb93xx/flash_cfg.c | 2 +-
arch/arm/boards/edb93xx/pll_cfg.c | 2 +-
arch/arm/boards/edb93xx/sdram_cfg.c | 2 +-
arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c | 2 +-
arch/arm/boards/eukrea_cpuimx25/lowlevel.c | 2 +-
arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c | 2 +-
arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c | 2 +-
arch/arm/boards/eukrea_cpuimx35/lowlevel.c | 2 +-
arch/arm/boards/eukrea_cpuimx51/eukrea_cpuimx51.c | 2 +-
arch/arm/boards/freescale-mx25-3-stack/3stack.c | 2 +-
arch/arm/boards/freescale-mx35-3-stack/3stack.c | 2 +-
arch/arm/boards/freescale-mx51-pdk/board.c | 2 +-
arch/arm/boards/freescale-mx53-loco/board.c | 2 +-
arch/arm/boards/guf-cupid/board.c | 2 +-
arch/arm/boards/guf-cupid/lowlevel.c | 2 +-
arch/arm/boards/guf-neso/board.c | 2 +-
arch/arm/boards/guf-neso/lowlevel.c | 2 +-
arch/arm/boards/imx21ads/imx21ads.c | 2 +-
arch/arm/boards/imx27ads/imx27ads.c | 2 +-
arch/arm/boards/karo-tx25/board.c | 2 +-
arch/arm/boards/karo-tx25/lowlevel.c | 2 +-
arch/arm/boards/karo-tx28/tx28-stk5.c | 3 +-
arch/arm/boards/karo-tx28/tx28.c | 2 +-
arch/arm/boards/mini2440/mini2440.c | 2 +-
arch/arm/boards/mmccpu/init.c | 2 +-
arch/arm/boards/nhk8815/setup.c | 2 +-
arch/arm/boards/omap/board-beagle.c | 2 +-
arch/arm/boards/omap/board-omap3evm.c | 2 +-
arch/arm/boards/omap/board-sdp343x.c | 2 +-
arch/arm/boards/panda/board.c | 2 +-
arch/arm/boards/panda/lowlevel.c | 2 +-
arch/arm/boards/panda/mux.c | 2 +-
arch/arm/boards/pcm037/pcm037.c | 2 +-
arch/arm/boards/pcm038/lowlevel.c | 2 +-
arch/arm/boards/pcm038/pcm038.c | 2 +-
arch/arm/boards/pcm043/lowlevel.c | 2 +-
arch/arm/boards/pcm043/pcm043.c | 2 +-
arch/arm/boards/pcm049/board.c | 2 +-
arch/arm/boards/pcm049/lowlevel.c | 2 +-
arch/arm/boards/pcm049/mux.c | 2 +-
arch/arm/boards/phycard-i.MX27/pca100.c | 2 +-
arch/arm/boards/pm9261/init.c | 2 +-
arch/arm/boards/pm9263/init.c | 4 +-
arch/arm/boards/pm9g45/init.c | 2 +-
arch/arm/boards/scb9328/scb9328.c | 2 +-
arch/arm/boards/usb-a926x/Makefile | 1 +
arch/arm/boards/usb-a926x/config.h | 6 +
arch/arm/boards/usb-a926x/env/config | 41 +
arch/arm/boards/usb-a926x/init.c | 202 +++
arch/arm/configs/at91sam9260ek_defconfig | 1 +
arch/arm/configs/at91sam9m10g45ek_defconfig | 1 +
arch/arm/configs/panda_defconfig | 2 +-
arch/arm/configs/pcm043_defconfig | 1 +
arch/arm/configs/usb_a9260_defconfig | 58 +
arch/arm/configs/usb_a9263_128mib_defconfig | 59 +
arch/arm/configs/usb_a9263_defconfig | 58 +
arch/arm/configs/usb_a9g20_128mib_defconfig | 59 +
arch/arm/configs/usb_a9g20_defconfig | 58 +
arch/arm/cpu/cache-l2x0.c | 2 +-
arch/arm/cpu/cpu.c | 13 -
arch/arm/cpu/mmu.c | 62 +-
arch/arm/include/asm/armlinux.h | 3 -
arch/arm/include/asm/io.h | 49 +-
arch/arm/include/asm/memory.h | 18 +-
arch/arm/lib/arm.c | 2 +-
arch/arm/lib/armlinux.c | 17 +-
arch/arm/lib/bootz.c | 21 +-
arch/arm/mach-at91/Kconfig | 27 +
arch/arm/mach-at91/at91rm9200_devices.c | 18 +
arch/arm/mach-at91/at91rm9200_time.c | 2 +-
arch/arm/mach-at91/at91sam9260_devices.c | 30 +-
arch/arm/mach-at91/at91sam9261_devices.c | 17 +
arch/arm/mach-at91/at91sam9263_devices.c | 42 +-
arch/arm/mach-at91/at91sam926x_time.c | 2 +-
arch/arm/mach-at91/at91sam9g45_devices.c | 86 +-
arch/arm/mach-at91/clock.c | 9 +-
arch/arm/mach-at91/gpio.c | 2 +-
arch/arm/mach-at91/include/mach/board.h | 17 +-
arch/arm/mach-at91/include/mach/gpio.h | 2 +-
arch/arm/mach-at91/include/mach/io.h | 2 +-
arch/arm/mach-at91/sam9_smc.c | 2 +-
arch/arm/mach-ep93xx/clocksource.c | 2 +-
arch/arm/mach-ep93xx/gpio.c | 2 +-
arch/arm/mach-ep93xx/led.c | 2 +-
arch/arm/mach-imx/Kconfig | 10 +
arch/arm/mach-imx/boot.c | 2 +-
arch/arm/mach-imx/clocksource.c | 2 +-
arch/arm/mach-imx/gpio.c | 2 +-
arch/arm/mach-imx/iim.c | 22 +-
arch/arm/mach-imx/imx25.c | 2 +-
arch/arm/mach-imx/imx35.c | 2 +-
arch/arm/mach-imx/imx51.c | 2 +-
arch/arm/mach-imx/imx53.c | 2 +-
arch/arm/mach-imx/include/mach/clock-imx51_53.h | 4 +
arch/arm/mach-imx/include/mach/clock.h | 1 +
arch/arm/mach-imx/include/mach/devices-imx25.h | 5 +
arch/arm/mach-imx/include/mach/devices-imx51.h | 27 +-
arch/arm/mach-imx/include/mach/imx25-regs.h | 1 +
arch/arm/mach-imx/include/mach/imx51-regs.h | 11 +-
arch/arm/mach-imx/internal-nand-boot.c | 2 +-
arch/arm/mach-imx/iomux-v2.c | 2 +-
arch/arm/mach-imx/iomux-v3.c | 2 +-
arch/arm/mach-imx/nand.c | 2 +-
arch/arm/mach-imx/speed-imx25.c | 7 +-
arch/arm/mach-imx/speed-imx31.c | 2 +-
arch/arm/mach-imx/speed-imx35.c | 2 +-
arch/arm/mach-imx/speed-imx51.c | 7 +-
arch/arm/mach-imx/speed-imx53.c | 2 +-
arch/arm/mach-mxs/clocksource-imx23.c | 2 +-
arch/arm/mach-mxs/clocksource-imx28.c | 2 +-
arch/arm/mach-mxs/imx_lcd_clk.c | 2 +-
arch/arm/mach-mxs/iomux-imx.c | 2 +-
arch/arm/mach-mxs/reset-imx.c | 2 +-
arch/arm/mach-mxs/speed-imx23.c | 2 +-
arch/arm/mach-mxs/speed-imx28.c | 2 +-
arch/arm/mach-mxs/usb.c | 2 +-
arch/arm/mach-nomadik/reset.c | 2 +-
arch/arm/mach-nomadik/timer.c | 2 +-
arch/arm/mach-omap/devices-gpmc-nand.c | 2 +-
arch/arm/mach-omap/gpio.c | 2 +-
arch/arm/mach-omap/gpmc.c | 2 +-
arch/arm/mach-omap/include/mach/omap3-silicon.h | 3 +
arch/arm/mach-omap/include/mach/omap_hsmmc.h | 28 +
arch/arm/mach-omap/include/mach/sys_info.h | 1 +
arch/arm/mach-omap/include/mach/syslib.h | 2 +-
arch/arm/mach-omap/omap3_clock.c | 2 +-
arch/arm/mach-omap/omap3_generic.c | 26 +-
arch/arm/mach-omap/omap4_clock.c | 2 +-
arch/arm/mach-omap/omap4_generic.c | 2 +-
arch/arm/mach-omap/s32k_clksource.c | 2 +-
arch/arm/mach-omap/syslib.c | 2 +-
arch/arm/mach-s3c24xx/generic.c | 2 +-
arch/arm/mach-s3c24xx/gpio-s3c24x0.c | 2 +-
arch/arm/mach-versatile/core.c | 2 +-
arch/arm/mach-versatile/include/mach/debug_ll.h | 2 +-
arch/blackfin/Makefile | 2 +-
arch/blackfin/lib/board.c | 2 +-
arch/mips/boards/dlink-dir-320/serial.c | 2 +-
arch/mips/boards/qemu-malta/serial.c | 2 +-
arch/mips/lib/barebox.lds.S | 4 -
arch/mips/lib/csrc-r4k.c | 2 +-
arch/mips/lib/memory.c | 2 +-
arch/mips/mach-bcm47xx/include/mach/debug_ll.h | 2 +-
arch/mips/mach-bcm47xx/reset.c | 2 +-
arch/mips/mach-malta/include/mach/debug_ll.h | 2 +-
arch/mips/mach-malta/reset.c | 2 +-
arch/nios2/cpu/interrupts.c | 2 +-
arch/nios2/include/asm/io.h | 2 +
arch/nios2/lib/board.c | 2 +-
arch/nios2/lib/clock.c | 2 +-
arch/nios2/lib/early_printf.c | 2 +-
arch/ppc/Kconfig | 9 -
arch/ppc/Makefile | 2 +-
arch/ppc/boards/pcm030/barebox.lds.S | 4 -
arch/ppc/boards/pcm030/config.h | 68 +-
arch/ppc/boards/pcm030/pcm030.c | 83 +-
arch/ppc/include/asm/common.h | 23 +-
arch/ppc/include/asm/mc146818rtc.h | 2 +-
arch/ppc/lib/board.c | 5 +-
arch/ppc/lib/board_data.c | 2 +-
arch/ppc/mach-mpc5xxx/Kconfig | 3 -
arch/ppc/mach-mpc5xxx/cpu.c | 132 ++-
arch/ppc/mach-mpc5xxx/cpu_init.c | 141 +--
arch/ppc/mach-mpc5xxx/include/mach/mpc5xxx.h | 12 +
arch/ppc/mach-mpc5xxx/interrupts.c | 2 +-
arch/ppc/mach-mpc5xxx/pci_mpc5200.c | 2 +-
arch/ppc/mach-mpc5xxx/start.S | 100 +-
arch/sandbox/Makefile | 1 -
arch/sandbox/os/Makefile | 1 -
arch/x86/Makefile | 2 +-
arch/x86/boot/a20.c | 2 +-
arch/x86/boot/prepare_uboot.c | 2 +-
arch/x86/include/asm/io.h | 2 +
arch/x86/lib/memory.c | 2 +-
arch/x86/mach-i386/generic.c | 2 +-
arch/x86/mach-i386/pit_timer.c | 2 +-
commands/bootm.c | 116 +-
commands/mem.c | 2 +-
commands/saveenv.c | 2 +-
common/Kconfig | 26 +-
common/console.c | 36 +-
common/dlmalloc.c | 2 +-
common/image.c | 152 ++-
common/memory.c | 18 +
common/startup.c | 30 +-
common/version.c | 5 +-
defaultenv/bin/_update_help | 2 +-
defaultenv/bin/boot | 17 +-
defaultenv/bin/update | 11 +-
defaultenv/config | 69 +
drivers/ata/disk_drive.c | 15 +-
drivers/base/resource.c | 82 +-
drivers/i2c/busses/i2c-imx.c | 54 +-
drivers/i2c/busses/i2c-omap.c | 2 +-
drivers/mci/atmel_mci.c | 7 +-
drivers/mci/imx-esdhc.c | 2 +-
drivers/mci/imx.c | 2 +-
drivers/mci/mci-core.c | 2 +-
drivers/mci/mxs.c | 2 +-
drivers/mci/omap_hsmmc.c | 12 +-
drivers/mci/s3c.c | 2 +-
drivers/mtd/nand/atmel_nand.c | 10 +-
drivers/mtd/nand/diskonchip.c | 2 +-
drivers/mtd/nand/nand_base.c | 2 +-
drivers/mtd/nand/nand_hwecc.c | 2 +-
drivers/mtd/nand/nand_hwecc_syndrome.c | 2 +-
drivers/mtd/nand/nand_imx.c | 23 +-
drivers/mtd/nand/nand_omap_gpmc.c | 2 +-
drivers/mtd/nand/nand_s3c2410.c | 2 +-
drivers/mtd/nand/nand_swecc.c | 2 +-
drivers/mtd/nand/nand_write.c | 2 +-
drivers/mtd/nand/nomadik_nand.c | 2 +-
drivers/net/altera_tse.c | 2 +-
drivers/net/cs8900.c | 2 +-
drivers/net/dm9000.c | 2 +-
drivers/net/ep93xx.c | 2 +-
drivers/net/fec_imx.c | 2 +-
drivers/net/fec_mpc5200.c | 8 +
drivers/net/macb.c | 20 +-
drivers/net/netx_eth.c | 2 +-
drivers/net/smc91111.c | 2 +-
drivers/net/smc911x.c | 2 +-
drivers/nor/cfi_flash.c | 26 +-
drivers/nor/cfi_flash.h | 14 +-
drivers/serial/amba-pl011.c | 2 +-
drivers/serial/atmel.c | 2 +-
drivers/serial/serial_altera.c | 2 +-
drivers/serial/serial_altera_jtag.c | 2 +-
drivers/serial/serial_at91rm9200.c | 2 +-
drivers/serial/serial_blackfin.c | 2 +-
drivers/serial/serial_imx.c | 2 +-
drivers/serial/serial_mpc5xxx.c | 25 -
drivers/serial/serial_netx.c | 2 +-
drivers/serial/serial_ns16550.c | 2 +-
drivers/serial/serial_pl010.c | 2 +-
drivers/serial/serial_s3c24x0.c | 2 +-
drivers/serial/stm-serial.c | 2 +-
drivers/spi/Kconfig | 10 +
drivers/spi/Makefile | 1 +
drivers/spi/altera_spi.c | 2 +-
drivers/spi/atmel_spi.c | 321 ++++
drivers/spi/atmel_spi.h | 167 ++
drivers/spi/imx_spi.c | 168 ++-
drivers/spi/spi.c | 7 +-
drivers/usb/Kconfig | 2 +
drivers/usb/Makefile | 1 +
drivers/usb/core/usb.c | 63 +-
drivers/usb/gadget/fsl_udc.c | 2 +-
drivers/usb/host/Kconfig | 3 +
drivers/usb/host/Makefile | 2 +
drivers/usb/host/ehci-hcd.c | 20 +-
drivers/usb/host/ehci-omap.c | 2 +-
drivers/usb/host/ohci-at91.c | 98 ++
drivers/usb/host/ohci-hcd.c | 1856 +++++++++++++++++++++
drivers/usb/host/ohci.h | 428 +++++
drivers/usb/otg/ulpi.c | 2 +-
drivers/usb/storage/Kconfig | 2 +
drivers/usb/storage/Makefile | 4 +
drivers/usb/storage/transport.c | 251 +++
drivers/usb/storage/transport.h | 95 ++
drivers/usb/storage/usb.c | 619 +++++++
drivers/usb/storage/usb.h | 96 ++
drivers/video/imx-ipu-fb.c | 2 +-
drivers/video/imx.c | 2 +-
drivers/video/s3c.c | 2 +-
drivers/video/stm.c | 2 +-
fs/fs.c | 18 +-
include/asm-generic/io.h | 222 +++
include/common.h | 2 +-
include/driver.h | 7 +
include/i2c/i2c.h | 1 +
include/image.h | 16 +-
include/io.h | 23 +
include/linux/ctype.h | 3 +-
include/mem_malloc.h | 10 -
include/memory.h | 25 +
include/reloc.h | 62 -
include/scsi.h | 208 +++
include/spi/spi.h | 3 +-
include/stdio.h | 12 +-
include/usb/usb.h | 26 +-
lib/vsprintf.c | 1 -
net/net.c | 9 +-
scripts/Makefile.build | 2 +-
scripts/mkimage.c | 5 +-
scripts/mod/modpost.c | 2 +-
scripts/mod/modpost.h | 2 +-
301 files changed, 6550 insertions(+), 1197 deletions(-)
create mode 100644 arch/arm/boards/usb-a926x/Makefile
create mode 100644 arch/arm/boards/usb-a926x/config.h
create mode 100644 arch/arm/boards/usb-a926x/env/config
create mode 100644 arch/arm/boards/usb-a926x/init.c
create mode 100644 arch/arm/configs/usb_a9260_defconfig
create mode 100644 arch/arm/configs/usb_a9263_128mib_defconfig
create mode 100644 arch/arm/configs/usb_a9263_defconfig
create mode 100644 arch/arm/configs/usb_a9g20_128mib_defconfig
create mode 100644 arch/arm/configs/usb_a9g20_defconfig
create mode 100644 arch/arm/mach-omap/include/mach/omap_hsmmc.h
create mode 100644 defaultenv/config
create mode 100644 drivers/spi/atmel_spi.c
create mode 100644 drivers/spi/atmel_spi.h
create mode 100644 drivers/usb/host/ohci-at91.c
create mode 100644 drivers/usb/host/ohci-hcd.c
create mode 100644 drivers/usb/host/ohci.h
create mode 100644 drivers/usb/storage/Kconfig
create mode 100644 drivers/usb/storage/Makefile
create mode 100644 drivers/usb/storage/transport.c
create mode 100644 drivers/usb/storage/transport.h
create mode 100644 drivers/usb/storage/usb.c
create mode 100644 drivers/usb/storage/usb.h
create mode 100644 include/asm-generic/io.h
create mode 100644 include/io.h
delete mode 100644 include/mem_malloc.h
create mode 100644 include/memory.h
delete mode 100644 include/reloc.h
create mode 100644 include/scsi.h
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list