[PATCH V2 1/3] arm/mach-pxa: Initial Intel/Marvell PXA support
Robert Jarzmik
robert.jarzmik at free.fr
Sat Nov 26 07:17:29 EST 2011
From: Marc Kleine-Budde <mkl at pengutronix.de>
The core support was brought by Marc and Sascha.
The cache choice was fixed by Luotao Fu.
Some gpio and devices addons were provided by Robert.
Signed-off-by: Robert Jarzmik <robert.jarzmik at free.fr>
Signed-off-by: Luotao Fu <l.fu at pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl at pengutronix.de>
---
Since V1: squashed patches
fixed pxa_serial
---
arch/arm/Kconfig | 5 +
arch/arm/Makefile | 2 +
arch/arm/cpu/Kconfig | 5 +
arch/arm/mach-pxa/Kconfig | 37 ++
arch/arm/mach-pxa/Makefile | 6 +
arch/arm/mach-pxa/clocksource.c | 50 +++
arch/arm/mach-pxa/common.c | 42 +++
arch/arm/mach-pxa/devices.c | 49 +++
arch/arm/mach-pxa/gpio.c | 70 ++++
arch/arm/mach-pxa/include/mach/clock.h | 16 +
arch/arm/mach-pxa/include/mach/devices.h | 26 ++
arch/arm/mach-pxa/include/mach/gpio.h | 136 ++++++++
arch/arm/mach-pxa/include/mach/hardware.h | 31 ++
arch/arm/mach-pxa/include/mach/mfp-pxa27x.h | 438 ++++++++++++++++++++++++
arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h | 133 ++++++++
arch/arm/mach-pxa/include/mach/mfp.h | 21 ++
arch/arm/mach-pxa/include/mach/pxa-regs.h | 33 ++
arch/arm/mach-pxa/include/mach/pxa27x-regs.h | 6 +
arch/arm/mach-pxa/include/mach/pxa2xx-regs.h | 267 +++++++++++++++
arch/arm/mach-pxa/include/mach/regs-intc.h | 34 ++
arch/arm/mach-pxa/include/mach/regs-ost.h | 34 ++
arch/arm/mach-pxa/include/plat/gpio.h | 74 ++++
arch/arm/mach-pxa/include/plat/mfp.h | 468 ++++++++++++++++++++++++++
arch/arm/mach-pxa/mfp-pxa2xx.c | 189 +++++++++++
arch/arm/mach-pxa/speed-pxa27x.c | 20 ++
drivers/serial/Kconfig | 4 +
drivers/serial/Makefile | 1 +
drivers/serial/serial_pxa.c | 205 +++++++++++
28 files changed, 2402 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-pxa/Kconfig
create mode 100644 arch/arm/mach-pxa/Makefile
create mode 100644 arch/arm/mach-pxa/clocksource.c
create mode 100644 arch/arm/mach-pxa/common.c
create mode 100644 arch/arm/mach-pxa/devices.c
create mode 100644 arch/arm/mach-pxa/gpio.c
create mode 100644 arch/arm/mach-pxa/include/mach/clock.h
create mode 100644 arch/arm/mach-pxa/include/mach/devices.h
create mode 100644 arch/arm/mach-pxa/include/mach/gpio.h
create mode 100644 arch/arm/mach-pxa/include/mach/hardware.h
create mode 100644 arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
create mode 100644 arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
create mode 100644 arch/arm/mach-pxa/include/mach/mfp.h
create mode 100644 arch/arm/mach-pxa/include/mach/pxa-regs.h
create mode 100644 arch/arm/mach-pxa/include/mach/pxa27x-regs.h
create mode 100644 arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
create mode 100644 arch/arm/mach-pxa/include/mach/regs-intc.h
create mode 100644 arch/arm/mach-pxa/include/mach/regs-ost.h
create mode 100644 arch/arm/mach-pxa/include/plat/gpio.h
create mode 100644 arch/arm/mach-pxa/include/plat/mfp.h
create mode 100644 arch/arm/mach-pxa/mfp-pxa2xx.c
create mode 100644 arch/arm/mach-pxa/speed-pxa27x.c
create mode 100644 drivers/serial/serial_pxa.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b15728e..40677a3 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -62,6 +62,10 @@ config ARCH_NOMADIK
config ARCH_OMAP
bool "TI OMAP"
+config ARCH_PXA
+ bool "Intel/Marvell PXA based"
+ select GENERIC_GPIO
+
config ARCH_S3C24xx
bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
select CPU_ARM920T
@@ -81,6 +85,7 @@ source arch/arm/mach-mxs/Kconfig
source arch/arm/mach-netx/Kconfig
source arch/arm/mach-nomadik/Kconfig
source arch/arm/mach-omap/Kconfig
+source arch/arm/mach-pxa/Kconfig
source arch/arm/mach-s3c24xx/Kconfig
source arch/arm/mach-versatile/Kconfig
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 0c42f3d..913a90e 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -27,6 +27,7 @@ arch-$(CONFIG_CPU_32v4T) :=-D__LINUX_ARM_ARCH__=4 -march=armv4t
# This selects how we optimise for the processor.
tune-$(CONFIG_CPU_ARM920T) :=-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM926T) :=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
ifeq ($(CONFIG_AEABI),y)
CFLAGS_ABI :=-mabi=aapcs-linux -mno-thumb-interwork
@@ -50,6 +51,7 @@ machine-$(CONFIG_ARCH_MXS) := mxs
machine-$(CONFIG_ARCH_NOMADIK) := nomadik
machine-$(CONFIG_ARCH_NETX) := netx
machine-$(CONFIG_ARCH_OMAP) := omap
+machine-$(CONFIG_ARCH_PXA) := pxa
machine-$(CONFIG_ARCH_S3C24xx) := s3c24xx
machine-$(CONFIG_ARCH_VERSATILE) := versatile
diff --git a/arch/arm/cpu/Kconfig b/arch/arm/cpu/Kconfig
index 5337c46..f55e862 100644
--- a/arch/arm/cpu/Kconfig
+++ b/arch/arm/cpu/Kconfig
@@ -45,6 +45,11 @@ config CPU_V7
bool
select CPU_32v7
+# Xscale PXA25x, PXA27x
+config CPU_XSCALE
+ bool
+ select CPU_32v4T
+
# Figure out what processor architecture version we should be using.
# This defines the compiler instruction set which depends on the machine type.
config CPU_32v4T
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
new file mode 100644
index 0000000..9e3c53a
--- /dev/null
+++ b/arch/arm/mach-pxa/Kconfig
@@ -0,0 +1,37 @@
+if ARCH_PXA
+
+config ARCH_TEXT_BASE
+ hex
+
+config BOARDINFO
+ string
+
+# ----------------------------------------------------------
+
+config ARCH_PXA2XX
+ bool
+ select CPU_XSCALE
+
+choice
+ prompt "Intel/Marvell PXA Processor"
+
+config ARCH_PXA27X
+ bool "PXA27x"
+ select ARCH_PXA2XX
+
+endchoice
+
+# ----------------------------------------------------------
+
+if ARCH_PXA27X
+
+choice
+ prompt "PXA27x Board Type"
+
+endchoice
+
+endif
+
+# ----------------------------------------------------------
+
+endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
new file mode 100644
index 0000000..c01a9e0
--- /dev/null
+++ b/arch/arm/mach-pxa/Makefile
@@ -0,0 +1,6 @@
+obj-y += clocksource.o
+obj-y += common.o
+obj-y += gpio.o
+
+obj-$(CONFIG_ARCH_PXA2XX) += mfp-pxa2xx.o
+obj-$(CONFIG_ARCH_PXA27X) += speed-pxa27x.o
diff --git a/arch/arm/mach-pxa/clocksource.c b/arch/arm/mach-pxa/clocksource.c
new file mode 100644
index 0000000..309f1ab
--- /dev/null
+++ b/arch/arm/mach-pxa/clocksource.c
@@ -0,0 +1,50 @@
+/*
+ * (C) Copyright 2009 Sascha Hauer <s.hauer at pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <init.h>
+#include <clock.h>
+#include <asm/io.h>
+
+#define OSCR 0x40A00010
+
+uint64_t pxa_clocksource_read(void)
+{
+ return readl(OSCR);
+}
+
+static struct clocksource cs = {
+ .read = pxa_clocksource_read,
+ .mask = 0xffffffff,
+ .shift = 20,
+};
+
+static int clocksource_init (void)
+{
+ cs.mult = clocksource_hz2mult(3250000, cs.shift);
+
+ init_clock(&cs);
+
+ return 0;
+}
+
+core_initcall(clocksource_init);
diff --git a/arch/arm/mach-pxa/common.c b/arch/arm/mach-pxa/common.c
new file mode 100644
index 0000000..1989166
--- /dev/null
+++ b/arch/arm/mach-pxa/common.c
@@ -0,0 +1,42 @@
+/*
+ * (C) Copyright 2009 Sascha Hauer <s.hauer at pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+#define OSMR3 0x40A0000C
+#define OSCR 0x40A00010
+#define OSSR 0x40A00014
+#define OWER 0x40A00018
+
+#define OWER_WME (1 << 0) /* Watch-dog Match Enable */
+#define OSSR_M3 (1 << 3) /* Match status channel 3 */
+
+void reset_cpu(ulong addr)
+{
+ /* Initialize the watchdog and let it fire */
+ writel(OWER_WME, OWER);
+ writel(OSSR_M3, OSSR);
+ writel(readl(OSCR) + 368640, OSMR3); /* ... in 100 ms */
+
+ while(1);
+}
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
new file mode 100644
index 0000000..1a396f1
--- /dev/null
+++ b/arch/arm/mach-pxa/devices.c
@@ -0,0 +1,49 @@
+/*
+ * (C) 2011 Robert Jarzmik <robert.jarzmik at free.fr>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <common.h>
+#include <driver.h>
+#include <mach/devices.h>
+#include <mach/pxafb.h>
+
+static inline struct device_d *pxa_add_device(char *name, int id, void *base,
+ int size, void *pdata)
+{
+ return add_generic_device(name, id, NULL, (resource_size_t)base, size,
+ IORESOURCE_MEM, pdata);
+}
+
+struct device_d *pxa_add_i2c(void *base, int id,
+ struct i2c_platform_data *pdata)
+{
+ return pxa_add_device("i2c-pxa", id, base, 0x1000, pdata);
+}
+
+struct device_d *pxa_add_uart(void *base, int id)
+{
+ return pxa_add_device("pxa_serial", id, base, 0x1000, NULL);
+}
+
+struct device_d *pxa_add_fb(void *base, struct pxafb_platform_data *pdata)
+{
+ return pxa_add_device("pxafb", -1, base, 0x1000, pdata);
+}
+
+struct device_d *pxa_add_mmc(void *base, int id, void *pdata)
+{
+ return pxa_add_device("pxa-mmc", id, base, 0x1000, pdata);
+}
diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c
new file mode 100644
index 0000000..f0c8c99
--- /dev/null
+++ b/arch/arm/mach-pxa/gpio.c
@@ -0,0 +1,70 @@
+/*
+ * linux/arch/arm/plat-pxa/gpio.c
+ *
+ * Generic PXA GPIO handling
+ *
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <errno.h>
+
+#include <mach/gpio.h>
+#include <asm/io.h>
+
+int pxa_last_gpio;
+
+struct pxa_gpio_chip {
+ void __iomem *regbase;
+};
+
+static struct pxa_gpio_chip *pxa_gpio_chips;
+
+#define for_each_gpio_chip(i, c) \
+ for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++)
+
+static int __init pxa_init_gpio_chip(int gpio_end)
+{
+ int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
+ struct pxa_gpio_chip *chips;
+
+ chips = kzalloc(nbanks * sizeof(struct pxa_gpio_chip), GFP_KERNEL);
+ if (chips == NULL) {
+ pr_err("%s: failed to allocate GPIO chips\n", __func__);
+ return -ENOMEM;
+ }
+
+ for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32)
+ chips[i].regbase = (void __iomem *)GPIO_BANK(i);
+
+ pxa_gpio_chips = chips;
+ return 0;
+}
+
+int __init pxa_init_gpio(int start, int end)
+{
+ struct pxa_gpio_chip *c;
+ int err, gpio;
+
+ pxa_last_gpio = end;
+
+ /* Initialize GPIO chips */
+ err = pxa_init_gpio_chip(end);
+ if (err)
+ return err;
+
+ for_each_gpio_chip(gpio, c) {
+ /* clear all GPIO edge detects */
+ __raw_writel(0, c->regbase + GFER_OFFSET);
+ __raw_writel(0, c->regbase + GRER_OFFSET);
+ __raw_writel(~0,c->regbase + GEDR_OFFSET);
+ }
+
+ return 0;
+}
diff --git a/arch/arm/mach-pxa/include/mach/clock.h b/arch/arm/mach-pxa/include/mach/clock.h
new file mode 100644
index 0000000..cd0ab8e
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/clock.h
@@ -0,0 +1,16 @@
+
+/*
+ * clock.h - definitions of the PXA clock functions
+ *
+ * Copyright (C) 2010 by Marc Kleine-Budde <mkl at pengutronix.de>
+ *
+ * This file is released under the GPLv2
+ *
+ */
+
+#ifndef __MACH_CLOCK_H
+#define __MACH_CLOCK_H
+
+unsigned long pxa_get_uartclk(void);
+
+#endif /* !__MACH_CLOCK_H */
diff --git a/arch/arm/mach-pxa/include/mach/devices.h b/arch/arm/mach-pxa/include/mach/devices.h
new file mode 100644
index 0000000..e205b7c
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/devices.h
@@ -0,0 +1,26 @@
+/*
+ * (C) 2011 Robert Jarzmik <robert.jarzmik at free.fr>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <i2c/i2c.h>
+#include <mach/pxafb.h>
+
+struct device_d *pxa_add_i2c(void *base, int id,
+ struct i2c_platform_data *pdata);
+struct device_d *pxa_add_uart(void *base, int id);
+struct device_d *pxa_add_fb(void *base, struct pxafb_platform_data *pdata);
+struct device_d *pxa_add_mmc(void *base, int id, void *pdata);
+
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
new file mode 100644
index 0000000..8f00677
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -0,0 +1,136 @@
+/*
+ * arch/arm/mach-pxa/include/mach/gpio.h
+ *
+ * PXA GPIO wrappers for arch-neutral GPIO calls
+ *
+ * Written by Philipp Zabel <philipp.zabel at gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_PXA_GPIO_H
+#define __ASM_ARCH_PXA_GPIO_H
+
+#include <mach/hardware.h>
+
+#define GPIO_REGS_VIRT (0x40E00000)
+
+#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
+#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
+
+/* GPIO Pin Level Registers */
+#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00)
+#define GPLR1 GPIO_REG(BANK_OFF(1) + 0x00)
+#define GPLR2 GPIO_REG(BANK_OFF(2) + 0x00)
+#define GPLR3 GPIO_REG(BANK_OFF(3) + 0x00)
+
+/* GPIO Pin Direction Registers */
+#define GPDR0 GPIO_REG(BANK_OFF(0) + 0x0c)
+#define GPDR1 GPIO_REG(BANK_OFF(1) + 0x0c)
+#define GPDR2 GPIO_REG(BANK_OFF(2) + 0x0c)
+#define GPDR3 GPIO_REG(BANK_OFF(3) + 0x0c)
+
+/* GPIO Pin Output Set Registers */
+#define GPSR0 GPIO_REG(BANK_OFF(0) + 0x18)
+#define GPSR1 GPIO_REG(BANK_OFF(1) + 0x18)
+#define GPSR2 GPIO_REG(BANK_OFF(2) + 0x18)
+#define GPSR3 GPIO_REG(BANK_OFF(3) + 0x18)
+
+/* GPIO Pin Output Clear Registers */
+#define GPCR0 GPIO_REG(BANK_OFF(0) + 0x24)
+#define GPCR1 GPIO_REG(BANK_OFF(1) + 0x24)
+#define GPCR2 GPIO_REG(BANK_OFF(2) + 0x24)
+#define GPCR3 GPIO_REG(BANK_OFF(3) + 0x24)
+
+/* GPIO Rising Edge Detect Registers */
+#define GRER0 GPIO_REG(BANK_OFF(0) + 0x30)
+#define GRER1 GPIO_REG(BANK_OFF(1) + 0x30)
+#define GRER2 GPIO_REG(BANK_OFF(2) + 0x30)
+#define GRER3 GPIO_REG(BANK_OFF(3) + 0x30)
+
+/* GPIO Falling Edge Detect Registers */
+#define GFER0 GPIO_REG(BANK_OFF(0) + 0x3c)
+#define GFER1 GPIO_REG(BANK_OFF(1) + 0x3c)
+#define GFER2 GPIO_REG(BANK_OFF(2) + 0x3c)
+#define GFER3 GPIO_REG(BANK_OFF(3) + 0x3c)
+
+/* GPIO Edge Detect Status Registers */
+#define GEDR0 GPIO_REG(BANK_OFF(0) + 0x48)
+#define GEDR1 GPIO_REG(BANK_OFF(1) + 0x48)
+#define GEDR2 GPIO_REG(BANK_OFF(2) + 0x48)
+#define GEDR3 GPIO_REG(BANK_OFF(3) + 0x48)
+
+/* GPIO Alternate Function Select Registers */
+#define GAFR0_L GPIO_REG(0x0054)
+#define GAFR0_U GPIO_REG(0x0058)
+#define GAFR1_L GPIO_REG(0x005C)
+#define GAFR1_U GPIO_REG(0x0060)
+#define GAFR2_L GPIO_REG(0x0064)
+#define GAFR2_U GPIO_REG(0x0068)
+#define GAFR3_L GPIO_REG(0x006C)
+#define GAFR3_U GPIO_REG(0x0070)
+
+/* More handy macros. The argument is a literal GPIO number. */
+
+#define GPIO_bit(x) (1 << ((x) & 0x1f))
+
+#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00)
+#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c)
+#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18)
+#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24)
+#define GRER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x30)
+#define GFER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x3c)
+#define GEDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x48)
+#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2))
+
+
+#define NR_BUILTIN_GPIO 128
+
+#define gpio_to_bank(gpio) ((gpio) >> 5)
+
+#ifdef CONFIG_CPU_PXA26x
+/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
+ * as well as their Alternate Function value being '1' for GPIO in GAFRx.
+ */
+static inline int __gpio_is_inverted(unsigned gpio)
+{
+ return cpu_is_pxa25x() && gpio > 85;
+}
+#else
+static inline int __gpio_is_inverted(unsigned gpio) { return 0; }
+#endif
+
+/*
+ * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
+ * function of a GPIO, and GPDRx cannot be altered once configured. It
+ * is attributed as "occupied" here (I know this terminology isn't
+ * accurate, you are welcome to propose a better one :-)
+ */
+static inline int __gpio_is_occupied(unsigned gpio)
+{
+ if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
+ int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
+ int dir = GPDR(gpio) & GPIO_bit(gpio);
+
+ if (__gpio_is_inverted(gpio))
+ return af != 1 || dir == 0;
+ else
+ return af != 0 || dir != 0;
+ } else
+ return GPDR(gpio) & GPIO_bit(gpio);
+}
+#include <plat/gpio.h>
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
new file mode 100644
index 0000000..e53085c
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -0,0 +1,31 @@
+/*
+ * (c) 2010 by Marc Kleine-Budde <mkl at pengutronix.de>
+ *
+ * Copyright (C) 2010 by Marc Kleine-Budde <mkl at pengutronix.de>
+ *
+ * This file is released under the GPLv2
+ *
+ */
+
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
+
+#ifdef CONFIG_ARCH_PXA2XX
+#define cpu_is_pxa2xx() (1)
+#else
+#define cpi_is_pxa2xx() (0)
+#endif
+
+#ifdef CONFIG_ARCH_PXA25X
+#define cpu_is_pxa25x() (1)
+#else
+#define cpu_is_pxa25x() (0)
+#endif
+
+#ifdef CONFIG_ARCH_PXA27X
+#define cpu_is_pxa27x() (1)
+#else
+#define cpu_is_pxa27x() (0)
+#endif
+
+#endif /* !__MACH_HARDWARE_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
new file mode 100644
index 0000000..6543c05
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -0,0 +1,438 @@
+#ifndef __ASM_ARCH_MFP_PXA27X_H
+#define __ASM_ARCH_MFP_PXA27X_H
+
+/*
+ * NOTE: for those special-function bidirectional GPIOs, as described
+ * in the "PXA27x Developer's Manual" Section 24.4.2.1, only its input
+ * alternative is preserved, the direction is actually selected by the
+ * specific controller, and this should work in most cases.
+ */
+
+#include <mach/mfp-pxa2xx.h>
+
+/* Note: GPIO3/GPIO4 will be driven by Power I2C when PCFR/PI2C_EN
+ * bit is set, regardless of the GPIO configuration
+ */
+#define GPIO3_GPIO MFP_CFG_IN(GPIO3, AF0)
+#define GPIO4_GPIO MFP_CFG_IN(GPIO4, AF0)
+
+/* GPIO */
+#define GPIO85_GPIO MFP_CFG_IN(GPIO85, AF0)
+#define GPIO86_GPIO MFP_CFG_IN(GPIO86, AF0)
+#define GPIO87_GPIO MFP_CFG_IN(GPIO87, AF0)
+#define GPIO88_GPIO MFP_CFG_IN(GPIO88, AF0)
+#define GPIO89_GPIO MFP_CFG_IN(GPIO89, AF0)
+#define GPIO90_GPIO MFP_CFG_IN(GPIO90, AF0)
+#define GPIO91_GPIO MFP_CFG_IN(GPIO91, AF0)
+#define GPIO92_GPIO MFP_CFG_IN(GPIO92, AF0)
+#define GPIO93_GPIO MFP_CFG_IN(GPIO93, AF0)
+#define GPIO94_GPIO MFP_CFG_IN(GPIO94, AF0)
+#define GPIO95_GPIO MFP_CFG_IN(GPIO95, AF0)
+#define GPIO96_GPIO MFP_CFG_IN(GPIO96, AF0)
+#define GPIO97_GPIO MFP_CFG_IN(GPIO97, AF0)
+#define GPIO98_GPIO MFP_CFG_IN(GPIO98, AF0)
+#define GPIO99_GPIO MFP_CFG_IN(GPIO99, AF0)
+#define GPIO100_GPIO MFP_CFG_IN(GPIO100, AF0)
+#define GPIO101_GPIO MFP_CFG_IN(GPIO101, AF0)
+#define GPIO102_GPIO MFP_CFG_IN(GPIO102, AF0)
+#define GPIO103_GPIO MFP_CFG_IN(GPIO103, AF0)
+#define GPIO104_GPIO MFP_CFG_IN(GPIO104, AF0)
+#define GPIO105_GPIO MFP_CFG_IN(GPIO105, AF0)
+#define GPIO106_GPIO MFP_CFG_IN(GPIO106, AF0)
+#define GPIO107_GPIO MFP_CFG_IN(GPIO107, AF0)
+#define GPIO108_GPIO MFP_CFG_IN(GPIO108, AF0)
+#define GPIO109_GPIO MFP_CFG_IN(GPIO109, AF0)
+#define GPIO110_GPIO MFP_CFG_IN(GPIO110, AF0)
+#define GPIO111_GPIO MFP_CFG_IN(GPIO111, AF0)
+#define GPIO112_GPIO MFP_CFG_IN(GPIO112, AF0)
+#define GPIO113_GPIO MFP_CFG_IN(GPIO113, AF0)
+#define GPIO114_GPIO MFP_CFG_IN(GPIO114, AF0)
+#define GPIO115_GPIO MFP_CFG_IN(GPIO115, AF0)
+#define GPIO116_GPIO MFP_CFG_IN(GPIO116, AF0)
+#define GPIO117_GPIO MFP_CFG_IN(GPIO117, AF0)
+#define GPIO118_GPIO MFP_CFG_IN(GPIO118, AF0)
+#define GPIO119_GPIO MFP_CFG_IN(GPIO119, AF0)
+#define GPIO120_GPIO MFP_CFG_IN(GPIO120, AF0)
+
+/* Crystal and Clock Signals */
+#define GPIO9_HZ_CLK MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW)
+#define GPIO10_HZ_CLK MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
+#define GPIO11_48_MHz MFP_CFG_OUT(GPIO11, AF3, DRIVE_LOW)
+#define GPIO12_48_MHz MFP_CFG_OUT(GPIO12, AF3, DRIVE_LOW)
+#define GPIO13_CLK_EXT MFP_CFG_IN(GPIO13, AF1)
+
+/* OS Timer Signals */
+#define GPIO11_EXT_SYNC_0 MFP_CFG_IN(GPIO11, AF1)
+#define GPIO12_EXT_SYNC_1 MFP_CFG_IN(GPIO12, AF1)
+#define GPIO9_CHOUT_0 MFP_CFG_OUT(GPIO9, AF3, DRIVE_LOW)
+#define GPIO10_CHOUT_1 MFP_CFG_OUT(GPIO10, AF3, DRIVE_LOW)
+#define GPIO11_CHOUT_0 MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
+#define GPIO12_CHOUT_1 MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW)
+
+/* SDRAM and Static Memory I/O Signals */
+#define GPIO20_nSDCS_2 MFP_CFG_OUT(GPIO20, AF1, DRIVE_HIGH)
+#define GPIO21_nSDCS_3 MFP_CFG_OUT(GPIO21, AF1, DRIVE_HIGH)
+#define GPIO15_nCS_1 MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH)
+#define GPIO78_nCS_2 MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH)
+#define GPIO79_nCS_3 MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH)
+#define GPIO80_nCS_4 MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH)
+#define GPIO33_nCS_5 MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH)
+
+/* Miscellaneous I/O and DMA Signals */
+#define GPIO21_DVAL_0 MFP_CFG_OUT(GPIO21, AF2, DRIVE_HIGH)
+#define GPIO116_DVAL_0 MFP_CFG_OUT(GPIO116, AF1, DRIVE_HIGH)
+#define GPIO33_DVAL_1 MFP_CFG_OUT(GPIO33, AF1, DRIVE_HIGH)
+#define GPIO96_DVAL_1 MFP_CFG_OUT(GPIO96, AF2, DRIVE_HIGH)
+#define GPIO18_RDY MFP_CFG_IN(GPIO18, AF1)
+#define GPIO20_DREQ_0 MFP_CFG_IN(GPIO20, AF1)
+#define GPIO115_DREQ_0 MFP_CFG_IN(GPIO115, AF1)
+#define GPIO80_DREQ_1 MFP_CFG_IN(GPIO80, AF1)
+#define GPIO97_DREQ_1 MFP_CFG_IN(GPIO97, AF2)
+#define GPIO85_DREQ_2 MFP_CFG_IN(GPIO85, AF2)
+#define GPIO100_DREQ_2 MFP_CFG_IN(GPIO100, AF2)
+
+/* Alternate Bus Master Mode I/O Signals */
+#define GPIO20_MBREQ MFP_CFG_IN(GPIO20, AF2)
+#define GPIO80_MBREQ MFP_CFG_IN(GPIO80, AF2)
+#define GPIO96_MBREQ MFP_CFG_IN(GPIO96, AF2)
+#define GPIO115_MBREQ MFP_CFG_IN(GPIO115, AF3)
+#define GPIO21_MBGNT MFP_CFG_OUT(GPIO21, AF3, DRIVE_LOW)
+#define GPIO33_MBGNT MFP_CFG_OUT(GPIO33, AF3, DRIVE_LOW)
+#define GPIO97_MBGNT MFP_CFG_OUT(GPIO97, AF2, DRIVE_LOW)
+#define GPIO116_MBGNT MFP_CFG_OUT(GPIO116, AF3, DRIVE_LOW)
+
+/* PC CARD */
+#define GPIO15_nPCE_1 MFP_CFG_OUT(GPIO15, AF1, DRIVE_HIGH)
+#define GPIO85_nPCE_1 MFP_CFG_OUT(GPIO85, AF1, DRIVE_HIGH)
+#define GPIO86_nPCE_1 MFP_CFG_OUT(GPIO86, AF1, DRIVE_HIGH)
+#define GPIO102_nPCE_1 MFP_CFG_OUT(GPIO102, AF1, DRIVE_HIGH)
+#define GPIO54_nPCE_2 MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
+#define GPIO78_nPCE_2 MFP_CFG_OUT(GPIO78, AF1, DRIVE_HIGH)
+#define GPIO87_nPCE_2 MFP_CFG_IN(GPIO87, AF1)
+#define GPIO55_nPREG MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
+#define GPIO50_nPIOR MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
+#define GPIO51_nPIOW MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
+#define GPIO49_nPWE MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH)
+#define GPIO48_nPOE MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH)
+#define GPIO57_nIOIS16 MFP_CFG_IN(GPIO57, AF1)
+#define GPIO56_nPWAIT MFP_CFG_IN(GPIO56, AF1)
+#define GPIO79_PSKTSEL MFP_CFG_OUT(GPIO79, AF1, DRIVE_HIGH)
+#define GPIO104_PSKTSEL MFP_CFG_OUT(GPIO104, AF1, DRIVE_HIGH)
+
+/* I2C */
+#define GPIO117_I2C_SCL MFP_CFG_IN(GPIO117, AF1)
+#define GPIO118_I2C_SDA MFP_CFG_IN(GPIO118, AF1)
+
+/* FFUART */
+#define GPIO9_FFUART_CTS MFP_CFG_IN(GPIO9, AF3)
+#define GPIO26_FFUART_CTS MFP_CFG_IN(GPIO26, AF3)
+#define GPIO35_FFUART_CTS MFP_CFG_IN(GPIO35, AF1)
+#define GPIO100_FFUART_CTS MFP_CFG_IN(GPIO100, AF3)
+#define GPIO10_FFUART_DCD MFP_CFG_IN(GPIO10, AF1)
+#define GPIO36_FFUART_DCD MFP_CFG_IN(GPIO36, AF1)
+#define GPIO33_FFUART_DSR MFP_CFG_IN(GPIO33, AF2)
+#define GPIO37_FFUART_DSR MFP_CFG_IN(GPIO37, AF1)
+#define GPIO38_FFUART_RI MFP_CFG_IN(GPIO38, AF1)
+#define GPIO89_FFUART_RI MFP_CFG_IN(GPIO89, AF3)
+#define GPIO19_FFUART_RXD MFP_CFG_IN(GPIO19, AF3)
+#define GPIO33_FFUART_RXD MFP_CFG_IN(GPIO33, AF1)
+#define GPIO34_FFUART_RXD MFP_CFG_IN(GPIO34, AF1)
+#define GPIO41_FFUART_RXD MFP_CFG_IN(GPIO41, AF1)
+#define GPIO53_FFUART_RXD MFP_CFG_IN(GPIO53, AF1)
+#define GPIO85_FFUART_RXD MFP_CFG_IN(GPIO85, AF1)
+#define GPIO96_FFUART_RXD MFP_CFG_IN(GPIO96, AF3)
+#define GPIO102_FFUART_RXD MFP_CFG_IN(GPIO102, AF3)
+#define GPIO16_FFUART_TXD MFP_CFG_OUT(GPIO16, AF3, DRIVE_HIGH)
+#define GPIO37_FFUART_TXD MFP_CFG_OUT(GPIO37, AF3, DRIVE_HIGH)
+#define GPIO39_FFUART_TXD MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
+#define GPIO83_FFUART_TXD MFP_CFG_OUT(GPIO83, AF2, DRIVE_HIGH)
+#define GPIO99_FFUART_TXD MFP_CFG_OUT(GPIO99, AF3, DRIVE_HIGH)
+#define GPIO27_FFUART_RTS MFP_CFG_OUT(GPIO27, AF3, DRIVE_HIGH)
+#define GPIO41_FFUART_RTS MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH)
+#define GPIO83_FFUART_RTS MFP_CFG_OUT(GPIO83, AF3, DRIVE_HIGH)
+#define GPIO98_FFUART_RTS MFP_CFG_OUT(GPIO98, AF3, DRIVE_HIGH)
+#define GPIO40_FFUART_DTR MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH)
+#define GPIO82_FFUART_DTR MFP_CFG_OUT(GPIO82, AF3, DRIVE_HIGH)
+
+/* BTUART */
+#define GPIO44_BTUART_CTS MFP_CFG_IN(GPIO44, AF1)
+#define GPIO42_BTUART_RXD MFP_CFG_IN(GPIO42, AF1)
+#define GPIO45_BTUART_RTS MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
+#define GPIO43_BTUART_TXD MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
+
+/* STUART */
+#define GPIO46_STUART_RXD MFP_CFG_IN(GPIO46, AF2)
+#define GPIO47_STUART_TXD MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH)
+
+/* FICP */
+#define GPIO42_FICP_RXD MFP_CFG_IN(GPIO42, AF2)
+#define GPIO46_FICP_RXD MFP_CFG_IN(GPIO46, AF1)
+#define GPIO43_FICP_TXD MFP_CFG_OUT(GPIO43, AF1, DRIVE_HIGH)
+#define GPIO47_FICP_TXD MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH)
+
+/* PWM 0/1/2/3 */
+#define GPIO11_PWM2_OUT MFP_CFG_OUT(GPIO11, AF2, DRIVE_LOW)
+#define GPIO12_PWM3_OUT MFP_CFG_OUT(GPIO12, AF2, DRIVE_LOW)
+#define GPIO16_PWM0_OUT MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW)
+#define GPIO17_PWM1_OUT MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW)
+#define GPIO38_PWM1_OUT MFP_CFG_OUT(GPIO38, AF3, DRIVE_LOW)
+#define GPIO46_PWM2_OUT MFP_CFG_OUT(GPIO46, AF2, DRIVE_LOW)
+#define GPIO47_PWM3_OUT MFP_CFG_OUT(GPIO47, AF3, DRIVE_LOW)
+#define GPIO79_PWM2_OUT MFP_CFG_OUT(GPIO79, AF3, DRIVE_LOW)
+#define GPIO80_PWM3_OUT MFP_CFG_OUT(GPIO80, AF3, DRIVE_LOW)
+#define GPIO115_PWM1_OUT MFP_CFG_OUT(GPIO115, AF3, DRIVE_LOW)
+
+/* AC97 */
+#define GPIO31_AC97_SYNC MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
+#define GPIO94_AC97_SYNC MFP_CFG_OUT(GPIO94, AF1, DRIVE_LOW)
+#define GPIO30_AC97_SDATA_OUT MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW)
+#define GPIO93_AC97_SDATA_OUT MFP_CFG_OUT(GPIO93, AF1, DRIVE_LOW)
+#define GPIO45_AC97_SYSCLK MFP_CFG_OUT(GPIO45, AF1, DRIVE_LOW)
+#define GPIO89_AC97_SYSCLK MFP_CFG_OUT(GPIO89, AF1, DRIVE_LOW)
+#define GPIO98_AC97_SYSCLK MFP_CFG_OUT(GPIO98, AF1, DRIVE_LOW)
+#define GPIO95_AC97_nRESET MFP_CFG_OUT(GPIO95, AF1, DRIVE_LOW)
+#define GPIO113_AC97_nRESET MFP_CFG_OUT(GPIO113, AF2, DRIVE_LOW)
+#define GPIO28_AC97_BITCLK MFP_CFG_IN(GPIO28, AF1)
+#define GPIO29_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO29, AF1)
+#define GPIO116_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO116, AF2)
+#define GPIO99_AC97_SDATA_IN_1 MFP_CFG_IN(GPIO99, AF2)
+
+/* I2S */
+#define GPIO28_I2S_BITCLK_IN MFP_CFG_IN(GPIO28, AF2)
+#define GPIO28_I2S_BITCLK_OUT MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW)
+#define GPIO29_I2S_SDATA_IN MFP_CFG_IN(GPIO29, AF2)
+#define GPIO30_I2S_SDATA_OUT MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW)
+#define GPIO31_I2S_SYNC MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
+#define GPIO113_I2S_SYSCLK MFP_CFG_OUT(GPIO113, AF1, DRIVE_LOW)
+
+/* SSP 1 */
+#define GPIO23_SSP1_SCLK MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
+#define GPIO29_SSP1_SCLK MFP_CFG_IN(GPIO29, AF3)
+#define GPIO27_SSP1_SYSCLK MFP_CFG_OUT(GPIO27, AF1, DRIVE_LOW)
+#define GPIO53_SSP1_SYSCLK MFP_CFG_OUT(GPIO53, AF3, DRIVE_LOW)
+#define GPIO24_SSP1_SFRM MFP_CFG_IN(GPIO24, AF2)
+#define GPIO28_SSP1_SFRM MFP_CFG_IN(GPIO28, AF3)
+#define GPIO25_SSP1_TXD MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW)
+#define GPIO57_SSP1_TXD MFP_CFG_OUT(GPIO57, AF3, DRIVE_LOW)
+#define GPIO26_SSP1_RXD MFP_CFG_IN(GPIO26, AF1)
+#define GPIO27_SSP1_SCLKEN MFP_CFG_IN(GPIO27, AF2)
+
+/* SSP 2 */
+#define GPIO19_SSP2_SCLK MFP_CFG_IN(GPIO19, AF1)
+#define GPIO22_SSP2_SCLK MFP_CFG_IN(GPIO22, AF3)
+#define GPIO29_SSP2_SCLK MFP_CFG_OUT(GPIO29, AF3, DRIVE_LOW)
+#define GPIO36_SSP2_SCLK MFP_CFG_IN(GPIO36, AF2)
+#define GPIO50_SSP2_SCLK MFP_CFG_IN(GPIO50, AF3)
+#define GPIO22_SSP2_SYSCLK MFP_CFG_OUT(GPIO22, AF2, DRIVE_LOW)
+#define GPIO14_SSP2_SFRM MFP_CFG_IN(GPIO14, AF2)
+#define GPIO37_SSP2_SFRM MFP_CFG_IN(GPIO37, AF2)
+#define GPIO87_SSP2_SFRM MFP_CFG_OUT(GPIO87, AF3, DRIVE_LOW)
+#define GPIO88_SSP2_SFRM MFP_CFG_IN(GPIO88, AF3)
+#define GPIO13_SSP2_TXD MFP_CFG_OUT(GPIO13, AF1, DRIVE_LOW)
+#define GPIO38_SSP2_TXD MFP_CFG_OUT(GPIO38, AF2, DRIVE_LOW)
+#define GPIO87_SSP2_TXD MFP_CFG_OUT(GPIO87, AF1, DRIVE_LOW)
+#define GPIO89_SSP2_TXD MFP_CFG_OUT(GPIO89, AF3, DRIVE_LOW)
+#define GPIO11_SSP2_RXD MFP_CFG_IN(GPIO11, AF2)
+#define GPIO29_SSP2_RXD MFP_CFG_OUT(GPIO29, AF1, DRIVE_LOW)
+#define GPIO40_SSP2_RXD MFP_CFG_IN(GPIO40, AF1)
+#define GPIO86_SSP2_RXD MFP_CFG_IN(GPIO86, AF1)
+#define GPIO88_SSP2_RXD MFP_CFG_IN(GPIO88, AF2)
+#define GPIO22_SSP2_EXTCLK MFP_CFG_IN(GPIO22, AF1)
+#define GPIO27_SSP2_EXTCLK MFP_CFG_IN(GPIO27, AF1)
+#define GPIO22_SSP2_SCLKEN MFP_CFG_IN(GPIO22, AF2)
+#define GPIO23_SSP2_SCLKEN MFP_CFG_IN(GPIO23, AF2)
+
+/* SSP 3 */
+#define GPIO34_SSP3_SCLK MFP_CFG_IN(GPIO34, AF3)
+#define GPIO40_SSP3_SCLK MFP_CFG_OUT(GPIO40, AF3, DRIVE_LOW)
+#define GPIO52_SSP3_SCLK MFP_CFG_IN(GPIO52, AF2)
+#define GPIO84_SSP3_SCLK MFP_CFG_IN(GPIO84, AF1)
+#define GPIO45_SSP3_SYSCLK MFP_CFG_OUT(GPIO45, AF3, DRIVE_LOW)
+#define GPIO35_SSP3_SFRM MFP_CFG_IN(GPIO35, AF3)
+#define GPIO39_SSP3_SFRM MFP_CFG_IN(GPIO39, AF3)
+#define GPIO83_SSP3_SFRM MFP_CFG_IN(GPIO83, AF1)
+#define GPIO35_SSP3_TXD MFP_CFG_OUT(GPIO35, AF3, DRIVE_LOW)
+#define GPIO38_SSP3_TXD MFP_CFG_OUT(GPIO38, AF1, DRIVE_LOW)
+#define GPIO81_SSP3_TXD MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW)
+#define GPIO41_SSP3_RXD MFP_CFG_IN(GPIO41, AF3)
+#define GPIO82_SSP3_RXD MFP_CFG_IN(GPIO82, AF1)
+#define GPIO89_SSP3_RXD MFP_CFG_IN(GPIO89, AF1)
+
+/* MMC */
+#define GPIO32_MMC_CLK MFP_CFG_OUT(GPIO32, AF2, DRIVE_LOW)
+#define GPIO92_MMC_DAT_0 MFP_CFG_IN(GPIO92, AF1)
+#define GPIO109_MMC_DAT_1 MFP_CFG_IN(GPIO109, AF1)
+#define GPIO110_MMC_DAT_2 MFP_CFG_IN(GPIO110, AF1)
+#define GPIO111_MMC_DAT_3 MFP_CFG_IN(GPIO111, AF1)
+#define GPIO112_MMC_CMD MFP_CFG_IN(GPIO112, AF1)
+
+/* LCD */
+#define GPIO58_LCD_LDD_0 MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW)
+#define GPIO59_LCD_LDD_1 MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW)
+#define GPIO60_LCD_LDD_2 MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW)
+#define GPIO61_LCD_LDD_3 MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW)
+#define GPIO62_LCD_LDD_4 MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW)
+#define GPIO63_LCD_LDD_5 MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW)
+#define GPIO64_LCD_LDD_6 MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW)
+#define GPIO65_LCD_LDD_7 MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW)
+#define GPIO66_LCD_LDD_8 MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW)
+#define GPIO67_LCD_LDD_9 MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW)
+#define GPIO68_LCD_LDD_10 MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW)
+#define GPIO69_LCD_LDD_11 MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW)
+#define GPIO70_LCD_LDD_12 MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW)
+#define GPIO71_LCD_LDD_13 MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW)
+#define GPIO72_LCD_LDD_14 MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW)
+#define GPIO73_LCD_LDD_15 MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW)
+#define GPIO86_LCD_LDD_16 MFP_CFG_OUT(GPIO86, AF2, DRIVE_LOW)
+#define GPIO87_LCD_LDD_17 MFP_CFG_OUT(GPIO87, AF2, DRIVE_LOW)
+#define GPIO74_LCD_FCLK MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
+#define GPIO75_LCD_LCLK MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
+#define GPIO76_LCD_PCLK MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
+#define GPIO77_LCD_BIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
+#define GPIO14_LCD_VSYNC MFP_CFG_IN(GPIO14, AF1)
+#define GPIO19_LCD_CS MFP_CFG_OUT(GPIO19, AF2, DRIVE_LOW)
+
+/* Keypad */
+#define GPIO93_KP_DKIN_0 MFP_CFG_IN(GPIO93, AF1)
+#define GPIO94_KP_DKIN_1 MFP_CFG_IN(GPIO94, AF1)
+#define GPIO95_KP_DKIN_2 MFP_CFG_IN(GPIO95, AF1)
+#define GPIO96_KP_DKIN_3 MFP_CFG_IN(GPIO96, AF1)
+#define GPIO97_KP_DKIN_4 MFP_CFG_IN(GPIO97, AF1)
+#define GPIO98_KP_DKIN_5 MFP_CFG_IN(GPIO98, AF1)
+#define GPIO99_KP_DKIN_6 MFP_CFG_IN(GPIO99, AF1)
+#define GPIO13_KP_KDIN_7 MFP_CFG_IN(GPIO13, AF2)
+#define GPIO100_KP_MKIN_0 MFP_CFG_IN(GPIO100, AF1)
+#define GPIO101_KP_MKIN_1 MFP_CFG_IN(GPIO101, AF1)
+#define GPIO102_KP_MKIN_2 MFP_CFG_IN(GPIO102, AF1)
+#define GPIO34_KP_MKIN_3 MFP_CFG_IN(GPIO34, AF2)
+#define GPIO37_KP_MKIN_3 MFP_CFG_IN(GPIO37, AF3)
+#define GPIO97_KP_MKIN_3 MFP_CFG_IN(GPIO97, AF3)
+#define GPIO98_KP_MKIN_4 MFP_CFG_IN(GPIO98, AF3)
+#define GPIO38_KP_MKIN_4 MFP_CFG_IN(GPIO38, AF2)
+#define GPIO39_KP_MKIN_4 MFP_CFG_IN(GPIO39, AF1)
+#define GPIO16_KP_MKIN_5 MFP_CFG_IN(GPIO16, AF1)
+#define GPIO90_KP_MKIN_5 MFP_CFG_IN(GPIO90, AF1)
+#define GPIO99_KP_MKIN_5 MFP_CFG_IN(GPIO99, AF3)
+#define GPIO17_KP_MKIN_6 MFP_CFG_IN(GPIO17, AF1)
+#define GPIO91_KP_MKIN_6 MFP_CFG_IN(GPIO91, AF1)
+#define GPIO95_KP_MKIN_6 MFP_CFG_IN(GPIO95, AF3)
+#define GPIO13_KP_MKIN_7 MFP_CFG_IN(GPIO13, AF3)
+#define GPIO36_KP_MKIN_7 MFP_CFG_IN(GPIO36, AF3)
+#define GPIO103_KP_MKOUT_0 MFP_CFG_OUT(GPIO103, AF2, DRIVE_HIGH)
+#define GPIO104_KP_MKOUT_1 MFP_CFG_OUT(GPIO104, AF2, DRIVE_HIGH)
+#define GPIO105_KP_MKOUT_2 MFP_CFG_OUT(GPIO105, AF2, DRIVE_HIGH)
+#define GPIO106_KP_MKOUT_3 MFP_CFG_OUT(GPIO106, AF2, DRIVE_HIGH)
+#define GPIO107_KP_MKOUT_4 MFP_CFG_OUT(GPIO107, AF2, DRIVE_HIGH)
+#define GPIO108_KP_MKOUT_5 MFP_CFG_OUT(GPIO108, AF2, DRIVE_HIGH)
+#define GPIO35_KP_MKOUT_6 MFP_CFG_OUT(GPIO35, AF2, DRIVE_HIGH)
+#define GPIO22_KP_MKOUT_7 MFP_CFG_OUT(GPIO22, AF1, DRIVE_HIGH)
+#define GPIO40_KP_MKOUT_6 MFP_CFG_OUT(GPIO40, AF1, DRIVE_HIGH)
+#define GPIO41_KP_MKOUT_7 MFP_CFG_OUT(GPIO41, AF1, DRIVE_HIGH)
+#define GPIO96_KP_MKOUT_6 MFP_CFG_OUT(GPIO96, AF3, DRIVE_HIGH)
+
+/* USB P3 */
+#define GPIO10_USB_P3_5 MFP_CFG_IN(GPIO10, AF3)
+#define GPIO11_USB_P3_1 MFP_CFG_IN(GPIO11, AF3)
+#define GPIO30_USB_P3_2 MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
+#define GPIO31_USB_P3_6 MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
+#define GPIO56_USB_P3_4 MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW)
+#define GPIO86_USB_P3_5 MFP_CFG_IN(GPIO86, AF3)
+#define GPIO87_USB_P3_1 MFP_CFG_IN(GPIO87, AF3)
+#define GPIO90_USB_P3_5 MFP_CFG_IN(GPIO90, AF2)
+#define GPIO91_USB_P3_1 MFP_CFG_IN(GPIO91, AF2)
+#define GPIO113_USB_P3_3 MFP_CFG_IN(GPIO113, AF3)
+
+/* USB P2 */
+#define GPIO34_USB_P2_2 MFP_CFG_OUT(GPIO34, AF1, DRIVE_LOW)
+#define GPIO35_USB_P2_1 MFP_CFG_IN(GPIO35, AF2)
+#define GPIO36_USB_P2_4 MFP_CFG_OUT(GPIO36, AF1, DRIVE_LOW)
+#define GPIO37_USB_P2_8 MFP_CFG_OUT(GPIO37, AF1, DRIVE_LOW)
+#define GPIO38_USB_P2_3 MFP_CFG_IN(GPIO38, AF3)
+#define GPIO39_USB_P2_6 MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
+#define GPIO40_USB_P2_5 MFP_CFG_IN(GPIO40, AF3)
+#define GPIO41_USB_P2_7 MFP_CFG_IN(GPIO41, AF2)
+#define GPIO53_USB_P2_3 MFP_CFG_IN(GPIO53, AF2)
+
+/* USB Host Port 1/2 */
+#define GPIO88_USBH1_PWR MFP_CFG_IN(GPIO88, AF1)
+#define GPIO89_USBH1_PEN MFP_CFG_OUT(GPIO89, AF2, DRIVE_LOW)
+#define GPIO119_USBH2_PWR MFP_CFG_IN(GPIO119, AF1)
+#define GPIO120_USBH2_PEN MFP_CFG_OUT(GPIO120, AF2, DRIVE_LOW)
+
+/* QCI - default to Master Mode: CIF_FV/CIF_LV Direction In */
+#define GPIO115_CIF_DD_3 MFP_CFG_IN(GPIO115, AF2)
+#define GPIO116_CIF_DD_2 MFP_CFG_IN(GPIO116, AF1)
+#define GPIO12_CIF_DD_7 MFP_CFG_IN(GPIO12, AF2)
+#define GPIO17_CIF_DD_6 MFP_CFG_IN(GPIO17, AF2)
+#define GPIO23_CIF_MCLK MFP_CFG_OUT(GPIO23, AF1, DRIVE_LOW)
+#define GPIO24_CIF_FV MFP_CFG_IN(GPIO24, AF1)
+#define GPIO25_CIF_LV MFP_CFG_IN(GPIO25, AF1)
+#define GPIO26_CIF_PCLK MFP_CFG_IN(GPIO26, AF2)
+#define GPIO27_CIF_DD_0 MFP_CFG_IN(GPIO27, AF3)
+#define GPIO42_CIF_MCLK MFP_CFG_OUT(GPIO42, AF3, DRIVE_LOW)
+#define GPIO43_CIF_FV MFP_CFG_IN(GPIO43, AF3)
+#define GPIO44_CIF_LV MFP_CFG_IN(GPIO44, AF3)
+#define GPIO45_CIF_PCLK MFP_CFG_IN(GPIO45, AF3)
+#define GPIO47_CIF_DD_0 MFP_CFG_IN(GPIO47, AF1)
+#define GPIO48_CIF_DD_5 MFP_CFG_IN(GPIO48, AF1)
+#define GPIO50_CIF_DD_3 MFP_CFG_IN(GPIO50, AF1)
+#define GPIO51_CIF_DD_2 MFP_CFG_IN(GPIO51, AF1)
+#define GPIO52_CIF_DD_4 MFP_CFG_IN(GPIO52, AF1)
+#define GPIO53_CIF_MCLK MFP_CFG_OUT(GPIO53, AF2, DRIVE_LOW)
+#define GPIO54_CIF_PCLK MFP_CFG_IN(GPIO54, AF3)
+#define GPIO55_CIF_DD_1 MFP_CFG_IN(GPIO55, AF1)
+#define GPIO81_CIF_DD_0 MFP_CFG_IN(GPIO81, AF2)
+#define GPIO82_CIF_DD_5 MFP_CFG_IN(GPIO82, AF3)
+#define GPIO83_CIF_DD_4 MFP_CFG_IN(GPIO83, AF3)
+#define GPIO84_CIF_FV MFP_CFG_IN(GPIO84, AF3)
+#define GPIO85_CIF_LV MFP_CFG_IN(GPIO85, AF3)
+#define GPIO90_CIF_DD_4 MFP_CFG_IN(GPIO90, AF3)
+#define GPIO91_CIF_DD_5 MFP_CFG_IN(GPIO91, AF3)
+#define GPIO93_CIF_DD_6 MFP_CFG_IN(GPIO93, AF2)
+#define GPIO94_CIF_DD_5 MFP_CFG_IN(GPIO94, AF2)
+#define GPIO95_CIF_DD_4 MFP_CFG_IN(GPIO95, AF2)
+#define GPIO98_CIF_DD_0 MFP_CFG_IN(GPIO98, AF2)
+#define GPIO103_CIF_DD_3 MFP_CFG_IN(GPIO103, AF1)
+#define GPIO104_CIF_DD_2 MFP_CFG_IN(GPIO104, AF1)
+#define GPIO105_CIF_DD_1 MFP_CFG_IN(GPIO105, AF1)
+#define GPIO106_CIF_DD_9 MFP_CFG_IN(GPIO106, AF1)
+#define GPIO107_CIF_DD_8 MFP_CFG_IN(GPIO107, AF1)
+#define GPIO108_CIF_DD_7 MFP_CFG_IN(GPIO108, AF1)
+#define GPIO114_CIF_DD_1 MFP_CFG_IN(GPIO114, AF1)
+
+/* Universal Subscriber ID Interface */
+#define GPIO114_UVS0 MFP_CFG_OUT(GPIO114, AF2, DRIVE_LOW)
+#define GPIO115_nUVS1 MFP_CFG_OUT(GPIO115, AF2, DRIVE_LOW)
+#define GPIO116_nUVS2 MFP_CFG_OUT(GPIO116, AF2, DRIVE_LOW)
+#define GPIO14_UCLK MFP_CFG_OUT(GPIO14, AF3, DRIVE_LOW)
+#define GPIO91_UCLK MFP_CFG_OUT(GPIO91, AF2, DRIVE_LOW)
+#define GPIO19_nURST MFP_CFG_OUT(GPIO19, AF3, DRIVE_LOW)
+#define GPIO90_nURST MFP_CFG_OUT(GPIO90, AF2, DRIVE_LOW)
+#define GPIO116_UDET MFP_CFG_IN(GPIO116, AF3)
+#define GPIO114_UEN MFP_CFG_OUT(GPIO114, AF1, DRIVE_LOW)
+#define GPIO115_UEN MFP_CFG_OUT(GPIO115, AF1, DRIVE_LOW)
+
+/* Mobile Scalable Link (MSL) Interface */
+#define GPIO81_BB_OB_DAT_0 MFP_CFG_OUT(GPIO81, AF2, DRIVE_LOW)
+#define GPIO48_BB_OB_DAT_1 MFP_CFG_OUT(GPIO48, AF1, DRIVE_LOW)
+#define GPIO50_BB_OB_DAT_2 MFP_CFG_OUT(GPIO50, AF1, DRIVE_LOW)
+#define GPIO51_BB_OB_DAT_3 MFP_CFG_OUT(GPIO51, AF1, DRIVE_LOW)
+#define GPIO52_BB_OB_CLK MFP_CFG_OUT(GPIO52, AF1, DRIVE_LOW)
+#define GPIO53_BB_OB_STB MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW)
+#define GPIO54_BB_OB_WAIT MFP_CFG_IN(GPIO54, AF2)
+#define GPIO82_BB_IB_DAT_0 MFP_CFG_IN(GPIO82, AF2)
+#define GPIO55_BB_IB_DAT_1 MFP_CFG_IN(GPIO55, AF2)
+#define GPIO56_BB_IB_DAT_2 MFP_CFG_IN(GPIO56, AF2)
+#define GPIO57_BB_IB_DAT_3 MFP_CFG_IN(GPIO57, AF2)
+#define GPIO83_BB_IB_CLK MFP_CFG_IN(GPIO83, AF2)
+#define GPIO84_BB_IB_STB MFP_CFG_IN(GPIO84, AF2)
+#define GPIO85_BB_IB_WAIT MFP_CFG_OUT(GPIO85, AF2, DRIVE_LOW)
+
+/* Memory Stick Host Controller */
+#define GPIO92_MSBS MFP_CFG_OUT(GPIO92, AF2, DRIVE_LOW)
+#define GPIO109_MSSDIO MFP_CFG_IN(GPIO109, AF2)
+#define GPIO112_nMSINS MFP_CFG_IN(GPIO112, AF2)
+#define GPIO32_MSSCLK MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
+
+extern int keypad_set_wake(unsigned int on);
+#endif /* __ASM_ARCH_MFP_PXA27X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
new file mode 100644
index 0000000..658b28e
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
@@ -0,0 +1,133 @@
+#ifndef __ASM_ARCH_MFP_PXA2XX_H
+#define __ASM_ARCH_MFP_PXA2XX_H
+
+#include <plat/mfp.h>
+
+/*
+ * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx:
+ *
+ * MFP_PIN(x)
+ * MFP_AFx
+ * MFP_LPM_DRIVE_{LOW, HIGH}
+ * MFP_LPM_EDGE_x
+ *
+ * other MFP_x bit definitions will be ignored
+ *
+ * and adds the below two bits specifically for pxa2xx:
+ *
+ * bit 23 - Input/Output (PXA2xx specific)
+ * bit 24 - Wakeup Enable(PXA2xx specific)
+ */
+
+#define MFP_DIR_IN (0x0 << 23)
+#define MFP_DIR_OUT (0x1 << 23)
+#define MFP_DIR_MASK (0x1 << 23)
+#define MFP_DIR(x) (((x) >> 23) & 0x1)
+
+#define MFP_LPM_CAN_WAKEUP (0x1 << 24)
+#define WAKEUP_ON_EDGE_RISE (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE)
+#define WAKEUP_ON_EDGE_FALL (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_FALL)
+#define WAKEUP_ON_EDGE_BOTH (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_BOTH)
+
+/* specifically for enabling wakeup on keypad GPIOs */
+#define WAKEUP_ON_LEVEL_HIGH (MFP_LPM_CAN_WAKEUP)
+
+#define MFP_CFG_IN(pin, af) \
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
+ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_IN))
+
+/* NOTE: pins configured as output _must_ provide a low power state,
+ * and this state should help to minimize the power dissipation.
+ */
+#define MFP_CFG_OUT(pin, af, state) \
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
+ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
+
+/* Common configurations for pxa25x and pxa27x
+ *
+ * Note: pins configured as GPIO are always initialized to input
+ * so not to cause any side effect
+ */
+#define GPIO0_GPIO MFP_CFG_IN(GPIO0, AF0)
+#define GPIO1_GPIO MFP_CFG_IN(GPIO1, AF0)
+#define GPIO9_GPIO MFP_CFG_IN(GPIO9, AF0)
+#define GPIO10_GPIO MFP_CFG_IN(GPIO10, AF0)
+#define GPIO11_GPIO MFP_CFG_IN(GPIO11, AF0)
+#define GPIO12_GPIO MFP_CFG_IN(GPIO12, AF0)
+#define GPIO13_GPIO MFP_CFG_IN(GPIO13, AF0)
+#define GPIO14_GPIO MFP_CFG_IN(GPIO14, AF0)
+#define GPIO15_GPIO MFP_CFG_IN(GPIO15, AF0)
+#define GPIO16_GPIO MFP_CFG_IN(GPIO16, AF0)
+#define GPIO17_GPIO MFP_CFG_IN(GPIO17, AF0)
+#define GPIO18_GPIO MFP_CFG_IN(GPIO18, AF0)
+#define GPIO19_GPIO MFP_CFG_IN(GPIO19, AF0)
+#define GPIO20_GPIO MFP_CFG_IN(GPIO20, AF0)
+#define GPIO21_GPIO MFP_CFG_IN(GPIO21, AF0)
+#define GPIO22_GPIO MFP_CFG_IN(GPIO22, AF0)
+#define GPIO23_GPIO MFP_CFG_IN(GPIO23, AF0)
+#define GPIO24_GPIO MFP_CFG_IN(GPIO24, AF0)
+#define GPIO25_GPIO MFP_CFG_IN(GPIO25, AF0)
+#define GPIO26_GPIO MFP_CFG_IN(GPIO26, AF0)
+#define GPIO27_GPIO MFP_CFG_IN(GPIO27, AF0)
+#define GPIO28_GPIO MFP_CFG_IN(GPIO28, AF0)
+#define GPIO29_GPIO MFP_CFG_IN(GPIO29, AF0)
+#define GPIO30_GPIO MFP_CFG_IN(GPIO30, AF0)
+#define GPIO31_GPIO MFP_CFG_IN(GPIO31, AF0)
+#define GPIO32_GPIO MFP_CFG_IN(GPIO32, AF0)
+#define GPIO33_GPIO MFP_CFG_IN(GPIO33, AF0)
+#define GPIO34_GPIO MFP_CFG_IN(GPIO34, AF0)
+#define GPIO35_GPIO MFP_CFG_IN(GPIO35, AF0)
+#define GPIO36_GPIO MFP_CFG_IN(GPIO36, AF0)
+#define GPIO37_GPIO MFP_CFG_IN(GPIO37, AF0)
+#define GPIO38_GPIO MFP_CFG_IN(GPIO38, AF0)
+#define GPIO39_GPIO MFP_CFG_IN(GPIO39, AF0)
+#define GPIO40_GPIO MFP_CFG_IN(GPIO40, AF0)
+#define GPIO41_GPIO MFP_CFG_IN(GPIO41, AF0)
+#define GPIO42_GPIO MFP_CFG_IN(GPIO42, AF0)
+#define GPIO43_GPIO MFP_CFG_IN(GPIO43, AF0)
+#define GPIO44_GPIO MFP_CFG_IN(GPIO44, AF0)
+#define GPIO45_GPIO MFP_CFG_IN(GPIO45, AF0)
+#define GPIO46_GPIO MFP_CFG_IN(GPIO46, AF0)
+#define GPIO47_GPIO MFP_CFG_IN(GPIO47, AF0)
+#define GPIO48_GPIO MFP_CFG_IN(GPIO48, AF0)
+#define GPIO49_GPIO MFP_CFG_IN(GPIO49, AF0)
+#define GPIO50_GPIO MFP_CFG_IN(GPIO50, AF0)
+#define GPIO51_GPIO MFP_CFG_IN(GPIO51, AF0)
+#define GPIO52_GPIO MFP_CFG_IN(GPIO52, AF0)
+#define GPIO53_GPIO MFP_CFG_IN(GPIO53, AF0)
+#define GPIO54_GPIO MFP_CFG_IN(GPIO54, AF0)
+#define GPIO55_GPIO MFP_CFG_IN(GPIO55, AF0)
+#define GPIO56_GPIO MFP_CFG_IN(GPIO56, AF0)
+#define GPIO57_GPIO MFP_CFG_IN(GPIO57, AF0)
+#define GPIO58_GPIO MFP_CFG_IN(GPIO58, AF0)
+#define GPIO59_GPIO MFP_CFG_IN(GPIO59, AF0)
+#define GPIO60_GPIO MFP_CFG_IN(GPIO60, AF0)
+#define GPIO61_GPIO MFP_CFG_IN(GPIO61, AF0)
+#define GPIO62_GPIO MFP_CFG_IN(GPIO62, AF0)
+#define GPIO63_GPIO MFP_CFG_IN(GPIO63, AF0)
+#define GPIO64_GPIO MFP_CFG_IN(GPIO64, AF0)
+#define GPIO65_GPIO MFP_CFG_IN(GPIO65, AF0)
+#define GPIO66_GPIO MFP_CFG_IN(GPIO66, AF0)
+#define GPIO67_GPIO MFP_CFG_IN(GPIO67, AF0)
+#define GPIO68_GPIO MFP_CFG_IN(GPIO68, AF0)
+#define GPIO69_GPIO MFP_CFG_IN(GPIO69, AF0)
+#define GPIO70_GPIO MFP_CFG_IN(GPIO70, AF0)
+#define GPIO71_GPIO MFP_CFG_IN(GPIO71, AF0)
+#define GPIO72_GPIO MFP_CFG_IN(GPIO72, AF0)
+#define GPIO73_GPIO MFP_CFG_IN(GPIO73, AF0)
+#define GPIO74_GPIO MFP_CFG_IN(GPIO74, AF0)
+#define GPIO75_GPIO MFP_CFG_IN(GPIO75, AF0)
+#define GPIO76_GPIO MFP_CFG_IN(GPIO76, AF0)
+#define GPIO77_GPIO MFP_CFG_IN(GPIO77, AF0)
+#define GPIO78_GPIO MFP_CFG_IN(GPIO78, AF0)
+#define GPIO79_GPIO MFP_CFG_IN(GPIO79, AF0)
+#define GPIO80_GPIO MFP_CFG_IN(GPIO80, AF0)
+#define GPIO81_GPIO MFP_CFG_IN(GPIO81, AF0)
+#define GPIO82_GPIO MFP_CFG_IN(GPIO82, AF0)
+#define GPIO83_GPIO MFP_CFG_IN(GPIO83, AF0)
+#define GPIO84_GPIO MFP_CFG_IN(GPIO84, AF0)
+
+extern void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num);
+extern void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm);
+extern int gpio_set_wake(unsigned int gpio, unsigned int on);
+#endif /* __ASM_ARCH_MFP_PXA2XX_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp.h b/arch/arm/mach-pxa/include/mach/mfp.h
new file mode 100644
index 0000000..271e249
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp.h
+ *
+ * Multi-Function Pin Definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ *
+ * 2007-8-21: eric miao <eric.miao at marvell.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_H
+#define __ASM_ARCH_MFP_H
+
+#include <plat/mfp.h>
+
+#endif /* __ASM_ARCH_MFP_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
new file mode 100644
index 0000000..5ca8c24
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h
@@ -0,0 +1,33 @@
+/*
+ * (c) 2010 by Marc Kleine-Budde <mkl at pengutronix.de>
+ *
+ * Copyright (C) 2010 by Marc Kleine-Budde <mkl at pengutronix.de>
+ *
+ * This file is released under the GPLv2
+ *
+ */
+
+#ifndef __MACH_PXA_REGS_H
+#define __MACH_PXA_REGS_H
+
+#ifndef __ASSEMBLY__
+# define __REG(x) (*((volatile u32 *)(x)))
+# define __REG16(x) (*(volatile u16 *)(x))
+# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y)))
+#else
+# define __REG(x) (x)
+# define __REG16(x) (x)
+# define __REG2(x,y) ((x)+(y))
+#endif
+
+#ifdef CONFIG_ARCH_PXA2XX
+# include <mach/pxa2xx-regs.h>
+#endif
+
+#ifdef CONFIG_ARCH_PXA27X
+# include <mach/pxa27x-regs.h>
+#else
+# error "unknown PXA soc type"
+#endif
+
+#endif /* !__MACH_PXA_REGS_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x-regs.h b/arch/arm/mach-pxa/include/mach/pxa27x-regs.h
new file mode 100644
index 0000000..f4d88d4
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa27x-regs.h
@@ -0,0 +1,6 @@
+#ifndef __MACH_PXA27X_REGS
+#define __MACH_PXA27X_REGS
+
+/* this file intentionally left blank */
+
+#endif /* !__MACH_PXA27X_REGS */
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
new file mode 100644
index 0000000..3c20f98
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
@@ -0,0 +1,267 @@
+/*
+ * arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+ *
+ * Taken from pxa-regs.h by Russell King
+ *
+ * Author: Nicolas Pitre
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PXA2XX_REGS_H
+#define __PXA2XX_REGS_H
+
+#include <mach/hardware.h>
+
+/*
+ * PXA Chip selects
+ */
+#define PXA_CS0_PHYS 0x00000000
+#define PXA_CS1_PHYS 0x04000000
+#define PXA_CS2_PHYS 0x08000000
+#define PXA_CS3_PHYS 0x0C000000
+#define PXA_CS4_PHYS 0x10000000
+#define PXA_CS5_PHYS 0x14000000
+
+/*
+ * Memory controller
+ */
+#define MDCNFG_OFFSET 0x00000000
+#define MDREFR_OFFSET 0x00000004
+#define MSC0_OFFSET 0x00000008
+#define MSC1_OFFSET 0x0000000C
+#define MSC2_OFFSET 0x00000010
+#define MECR_OFFSET 0x00000014
+#define SXCNFG_OFFSET 0x0000001C
+#define FLYCNFG_OFFSET 0x00000020
+#define MCMEM0_OFFSET 0x00000028
+#define MCMEM1_OFFSET 0x0000002C
+#define MCATT0_OFFSET 0x00000030
+#define MCATT1_OFFSET 0x00000034
+#define MCIO0_OFFSET 0x00000038
+#define MCIO1_OFFSET 0x0000003C
+#define MDMRS_OFFSET 0x00000040
+
+#define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */
+#define MDREFR __REG(0x48000004) /* SDRAM Refresh Control Register */
+#define MSC0 __REG(0x48000008) /* Static Memory Control Register 0 */
+#define MSC1 __REG(0x4800000C) /* Static Memory Control Register 1 */
+#define MSC2 __REG(0x48000010) /* Static Memory Control Register 2 */
+#define MECR __REG(0x48000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
+#define SXLCR __REG(0x48000018) /* LCR value to be written to SDRAM-Timing Synchronous Flash */
+#define SXCNFG __REG(0x4800001C) /* Synchronous Static Memory Control Register */
+#define SXMRS __REG(0x48000024) /* MRS value to be written to Synchronous Flash or SMROM */
+#define MCMEM0 __REG(0x48000028) /* Card interface Common Memory Space Socket 0 Timing */
+#define MCMEM1 __REG(0x4800002C) /* Card interface Common Memory Space Socket 1 Timing */
+#define MCATT0 __REG(0x48000030) /* Card interface Attribute Space Socket 0 Timing Configuration */
+#define MCATT1 __REG(0x48000034) /* Card interface Attribute Space Socket 1 Timing Configuration */
+#define MCIO0 __REG(0x48000038) /* Card interface I/O Space Socket 0 Timing Configuration */
+#define MCIO1 __REG(0x4800003C) /* Card interface I/O Space Socket 1 Timing Configuration */
+#define MDMRS __REG(0x48000040) /* MRS value to be written to SDRAM */
+#define BOOT_DEF __REG(0x48000044) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
+
+/*
+ * More handy macros for PCMCIA
+ *
+ * Arg is socket number
+ */
+#define MCMEM(s) __REG2(0x48000028, (s)<<2 ) /* Card interface Common Memory Space Socket s Timing */
+#define MCATT(s) __REG2(0x48000030, (s)<<2 ) /* Card interface Attribute Space Socket s Timing Configuration */
+#define MCIO(s) __REG2(0x48000038, (s)<<2 ) /* Card interface I/O Space Socket s Timing Configuration */
+
+/* MECR register defines */
+#define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
+#define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */
+
+#define MDCNFG_DE0 (1 << 0) /* SDRAM Bank 0 Enable */
+#define MDCNFG_DE1 (1 << 1) /* SDRAM Bank 1 Enable */
+#define MDCNFG_DE2 (1 << 16) /* SDRAM Bank 2 Enable */
+#define MDCNFG_DE3 (1 << 17) /* SDRAM Bank 3 Enable */
+
+#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */
+#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */
+#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */
+#define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */
+#define MDREFR_SLFRSH (1 << 22) /* SDRAM Self-Refresh Control/Status */
+#define MDREFR_APD (1 << 20) /* SDRAM/SSRAM Auto-Power-Down Enable */
+#define MDREFR_K2DB2 (1 << 19) /* SDCLK2 Divide by 2 Control/Status */
+#define MDREFR_K2RUN (1 << 18) /* SDCLK2 Run Control/Status */
+#define MDREFR_K1DB2 (1 << 17) /* SDCLK1 Divide by 2 Control/Status */
+#define MDREFR_K1RUN (1 << 16) /* SDCLK1 Run Control/Status */
+#define MDREFR_E1PIN (1 << 15) /* SDCKE1 Level Control/Status */
+#define MDREFR_K0DB2 (1 << 14) /* SDCLK0 Divide by 2 Control/Status */
+#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */
+#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */
+
+/*
+ * Power Manager
+ */
+
+#define PMCR __REG(0x40F00000) /* Power Manager Control Register */
+#define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */
+#define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */
+#define PWER __REG(0x40F0000C) /* Power Manager Wake-up Enable Register */
+#define PRER __REG(0x40F00010) /* Power Manager GPIO Rising-Edge Detect Enable Register */
+#define PFER __REG(0x40F00014) /* Power Manager GPIO Falling-Edge Detect Enable Register */
+#define PEDR __REG(0x40F00018) /* Power Manager GPIO Edge Detect Status Register */
+#define PCFR __REG(0x40F0001C) /* Power Manager General Configuration Register */
+#define PGSR0 __REG(0x40F00020) /* Power Manager GPIO Sleep State Register for GP[31-0] */
+#define PGSR1 __REG(0x40F00024) /* Power Manager GPIO Sleep State Register for GP[63-32] */
+#define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */
+#define PGSR3 __REG(0x40F0002C) /* Power Manager GPIO Sleep State Register for GP[118-96] */
+#define RCSR __REG(0x40F00030) /* Reset Controller Status Register */
+
+#define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */
+#define PSTR __REG(0x40F00038) /* Power Manager Standby Config Register */
+#define PSNR __REG(0x40F0003C) /* Power Manager Sense Config Register */
+#define PVCR __REG(0x40F00040) /* Power Manager VoltageControl Register */
+#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */
+#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */
+#define PCMD(x) __REG2(0x40F00080, (x)<<2)
+#define PCMD0 __REG(0x40F00080 + 0 * 4)
+#define PCMD1 __REG(0x40F00080 + 1 * 4)
+#define PCMD2 __REG(0x40F00080 + 2 * 4)
+#define PCMD3 __REG(0x40F00080 + 3 * 4)
+#define PCMD4 __REG(0x40F00080 + 4 * 4)
+#define PCMD5 __REG(0x40F00080 + 5 * 4)
+#define PCMD6 __REG(0x40F00080 + 6 * 4)
+#define PCMD7 __REG(0x40F00080 + 7 * 4)
+#define PCMD8 __REG(0x40F00080 + 8 * 4)
+#define PCMD9 __REG(0x40F00080 + 9 * 4)
+#define PCMD10 __REG(0x40F00080 + 10 * 4)
+#define PCMD11 __REG(0x40F00080 + 11 * 4)
+#define PCMD12 __REG(0x40F00080 + 12 * 4)
+#define PCMD13 __REG(0x40F00080 + 13 * 4)
+#define PCMD14 __REG(0x40F00080 + 14 * 4)
+#define PCMD15 __REG(0x40F00080 + 15 * 4)
+#define PCMD16 __REG(0x40F00080 + 16 * 4)
+#define PCMD17 __REG(0x40F00080 + 17 * 4)
+#define PCMD18 __REG(0x40F00080 + 18 * 4)
+#define PCMD19 __REG(0x40F00080 + 19 * 4)
+#define PCMD20 __REG(0x40F00080 + 20 * 4)
+#define PCMD21 __REG(0x40F00080 + 21 * 4)
+#define PCMD22 __REG(0x40F00080 + 22 * 4)
+#define PCMD23 __REG(0x40F00080 + 23 * 4)
+#define PCMD24 __REG(0x40F00080 + 24 * 4)
+#define PCMD25 __REG(0x40F00080 + 25 * 4)
+#define PCMD26 __REG(0x40F00080 + 26 * 4)
+#define PCMD27 __REG(0x40F00080 + 27 * 4)
+#define PCMD28 __REG(0x40F00080 + 28 * 4)
+#define PCMD29 __REG(0x40F00080 + 29 * 4)
+#define PCMD30 __REG(0x40F00080 + 30 * 4)
+#define PCMD31 __REG(0x40F00080 + 31 * 4)
+
+#define PCMD_MBC (1<<12)
+#define PCMD_DCE (1<<11)
+#define PCMD_LC (1<<10)
+/* FIXME: PCMD_SQC need be checked. */
+#define PCMD_SQC (3<<8) /* currently only bit 8 is changeable,
+ bit 9 should be 0 all day. */
+#define PVCR_VCSA (0x1<<14)
+#define PVCR_CommandDelay (0xf80)
+#define PCFR_PI2C_EN (0x1 << 6)
+
+#define PSSR_OTGPH (1 << 6) /* OTG Peripheral control Hold */
+#define PSSR_RDH (1 << 5) /* Read Disable Hold */
+#define PSSR_PH (1 << 4) /* Peripheral Control Hold */
+#define PSSR_STS (1 << 3) /* Standby Mode Status */
+#define PSSR_VFS (1 << 2) /* VDD Fault Status */
+#define PSSR_BFS (1 << 1) /* Battery Fault Status */
+#define PSSR_SSS (1 << 0) /* Software Sleep Status */
+
+#define PSLR_SL_ROD (1 << 20) /* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */
+
+#define PCFR_RO (1 << 15) /* RDH Override */
+#define PCFR_PO (1 << 14) /* PH Override */
+#define PCFR_GPROD (1 << 12) /* GPIO nRESET_OUT Disable */
+#define PCFR_L1_EN (1 << 11) /* Sleep Mode L1 converter Enable */
+#define PCFR_FVC (1 << 10) /* Frequency/Voltage Change */
+#define PCFR_DC_EN (1 << 7) /* Sleep/deep-sleep DC-DC Converter Enable */
+#define PCFR_PI2CEN (1 << 6) /* Enable PI2C controller */
+#define PCFR_GPR_EN (1 << 4) /* nRESET_GPIO Pin Enable */
+#define PCFR_DS (1 << 3) /* Deep Sleep Mode */
+#define PCFR_FS (1 << 2) /* Float Static Chip Selects */
+#define PCFR_FP (1 << 1) /* Float PCMCIA controls */
+#define PCFR_OPDE (1 << 0) /* 3.6864 MHz oscillator power-down enable */
+
+#define RCSR_GPR (1 << 3) /* GPIO Reset */
+#define RCSR_SMR (1 << 2) /* Sleep Mode */
+#define RCSR_WDR (1 << 1) /* Watchdog Reset */
+#define RCSR_HWR (1 << 0) /* Hardware Reset */
+
+#define PWER_GPIO(Nb) (1 << Nb) /* GPIO [0..15] wake-up enable */
+#define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */
+#define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */
+#define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */
+#define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */
+#define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */
+#define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */
+#define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */
+#define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */
+#define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */
+#define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */
+#define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */
+#define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */
+#define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */
+#define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */
+#define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */
+#define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */
+#define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */
+
+/*
+ * PXA2xx specific Core clock definitions
+ */
+#define CCCR __REG(0x41300000) /* Core Clock Configuration Register */
+#define CCSR __REG(0x4130000C) /* Core Clock Status Register */
+#define CKEN __REG(0x41300004) /* Clock Enable Register */
+#define OSCC __REG(0x41300008) /* Oscillator Configuration Register */
+
+#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
+#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */
+#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */
+
+#define CKEN_AC97CONF (1 << 31) /* AC97 Controller Configuration */
+#define CKEN_CAMERA (1 << 24) /* Camera Interface Clock Enable */
+#define CKEN_SSP1 (1 << 23) /* SSP1 Unit Clock Enable */
+#define CKEN_MEMC (1 << 22) /* Memory Controller Clock Enable */
+#define CKEN_MEMSTK (1 << 21) /* Memory Stick Host Controller */
+#define CKEN_IM (1 << 20) /* Internal Memory Clock Enable */
+#define CKEN_KEYPAD (1 << 19) /* Keypad Interface Clock Enable */
+#define CKEN_USIM (1 << 18) /* USIM Unit Clock Enable */
+#define CKEN_MSL (1 << 17) /* MSL Unit Clock Enable */
+#define CKEN_LCD (1 << 16) /* LCD Unit Clock Enable */
+#define CKEN_PWRI2C (1 << 15) /* PWR I2C Unit Clock Enable */
+#define CKEN_I2C (1 << 14) /* I2C Unit Clock Enable */
+#define CKEN_FICP (1 << 13) /* FICP Unit Clock Enable */
+#define CKEN_MMC (1 << 12) /* MMC Unit Clock Enable */
+#define CKEN_USB (1 << 11) /* USB Unit Clock Enable */
+#define CKEN_ASSP (1 << 10) /* ASSP (1 << SSP3) Clock Enable */
+#define CKEN_USBHOST (1 << 10) /* USB Host Unit Clock Enable */
+#define CKEN_OSTIMER (1 << 9) /* OS Timer Unit Clock Enable */
+#define CKEN_NSSP (1 << 9) /* NSSP (1 << SSP2) Clock Enable */
+#define CKEN_I2S (1 << 8) /* I2S Unit Clock Enable */
+#define CKEN_BTUART (1 << 7) /* BTUART Unit Clock Enable */
+#define CKEN_FFUART (1 << 6) /* FFUART Unit Clock Enable */
+#define CKEN_STUART (1 << 5) /* STUART Unit Clock Enable */
+#define CKEN_HWUART (1 << 4) /* HWUART Unit Clock Enable */
+#define CKEN_SSP3 (1 << 4) /* SSP3 Unit Clock Enable */
+#define CKEN_SSP (1 << 3) /* SSP Unit Clock Enable */
+#define CKEN_SSP2 (1 << 3) /* SSP2 Unit Clock Enable */
+#define CKEN_AC97 (1 << 2) /* AC97 Unit Clock Enable */
+#define CKEN_PWM1 (1 << 1) /* PWM1 Clock Enable */
+#define CKEN_PWM0 (1 << 0) /* PWM0 Clock Enable */
+
+#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */
+#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */
+
+/* PWRMODE register M field values */
+
+#define PWRMODE_IDLE 0x1
+#define PWRMODE_STANDBY 0x2
+#define PWRMODE_SLEEP 0x3
+#define PWRMODE_DEEPSLEEP 0x7
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/regs-intc.h b/arch/arm/mach-pxa/include/mach/regs-intc.h
new file mode 100644
index 0000000..68464ce
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-intc.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_MACH_REGS_INTC_H
+#define __ASM_MACH_REGS_INTC_H
+
+#include <mach/hardware.h>
+
+/*
+ * Interrupt Controller
+ */
+
+#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */
+#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */
+#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */
+#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */
+#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */
+#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */
+#define ICHP __REG(0x40D00018) /* Interrupt Controller Highest Priority Register */
+
+#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */
+#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */
+#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */
+#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */
+#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */
+
+#define ICIP3 __REG(0x40D00130) /* Interrupt Controller IRQ Pending Register 3 */
+#define ICMR3 __REG(0x40D00134) /* Interrupt Controller Mask Register 3 */
+#define ICLR3 __REG(0x40D00138) /* Interrupt Controller Level Register 3 */
+#define ICFP3 __REG(0x40D0013C) /* Interrupt Controller FIQ Pending Register 3 */
+#define ICPR3 __REG(0x40D00140) /* Interrupt Controller Pending Register 3 */
+
+#define IPR(x) __REG(0x40D0001C + (x < 32 ? (x << 2) \
+ : (x < 64 ? (0x94 + ((x - 32) << 2)) \
+ : (0x128 + ((x - 64) << 2)))))
+
+#endif /* __ASM_MACH_REGS_INTC_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-ost.h b/arch/arm/mach-pxa/include/mach/regs-ost.h
new file mode 100644
index 0000000..a3e5f86
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-ost.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_MACH_REGS_OST_H
+#define __ASM_MACH_REGS_OST_H
+
+#include <mach/hardware.h>
+
+/*
+ * OS Timer & Match Registers
+ */
+
+#define OSMR0 __REG(0x40A00000) /* */
+#define OSMR1 __REG(0x40A00004) /* */
+#define OSMR2 __REG(0x40A00008) /* */
+#define OSMR3 __REG(0x40A0000C) /* */
+#define OSMR4 __REG(0x40A00080) /* */
+#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */
+#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */
+#define OMCR4 __REG(0x40A000C0) /* */
+#define OSSR __REG(0x40A00014) /* OS Timer Status Register */
+#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */
+#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */
+
+#define OSSR_M3 (1 << 3) /* Match status channel 3 */
+#define OSSR_M2 (1 << 2) /* Match status channel 2 */
+#define OSSR_M1 (1 << 1) /* Match status channel 1 */
+#define OSSR_M0 (1 << 0) /* Match status channel 0 */
+
+#define OWER_WME (1 << 0) /* Watchdog Match Enable */
+
+#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */
+#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */
+#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */
+#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */
+
+#endif /* __ASM_MACH_REGS_OST_H */
diff --git a/arch/arm/mach-pxa/include/plat/gpio.h b/arch/arm/mach-pxa/include/plat/gpio.h
new file mode 100644
index 0000000..4c7b526
--- /dev/null
+++ b/arch/arm/mach-pxa/include/plat/gpio.h
@@ -0,0 +1,74 @@
+#ifndef __PLAT_GPIO_H
+#define __PLAT_GPIO_H
+
+#include <mach/gpio.h>
+
+/*
+ * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
+ * one set of registers. The register offsets are organized below:
+ *
+ * GPLR GPDR GPSR GPCR GRER GFER GEDR
+ * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048
+ * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C
+ * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050
+ *
+ * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148
+ * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C
+ * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150
+ *
+ * NOTE:
+ * BANK 3 is only available on PXA27x and later processors.
+ * BANK 4 and 5 are only available on PXA935
+ */
+
+#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n))
+
+#define GPLR_OFFSET 0x00
+#define GPDR_OFFSET 0x0C
+#define GPSR_OFFSET 0x18
+#define GPCR_OFFSET 0x24
+#define GRER_OFFSET 0x30
+#define GFER_OFFSET 0x3C
+#define GEDR_OFFSET 0x48
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ return GPLR(gpio) & GPIO_bit(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ if (value)
+ GPSR(gpio) = GPIO_bit(gpio);
+ else
+ GPCR(gpio) = GPIO_bit(gpio);
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+ if (__gpio_is_inverted(gpio))
+ GPDR(gpio) |= GPIO_bit(gpio);
+ else
+ GPDR(gpio) &= ~GPIO_bit(gpio);
+ return 0;
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+ gpio_set_value(gpio, value);
+ if (__gpio_is_inverted(gpio))
+ GPDR(gpio) &= ~GPIO_bit(gpio);
+ else
+ GPDR(gpio) |= GPIO_bit(gpio);
+ return 0;
+}
+
+/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
+ * Those cases currently cause holes in the GPIO number space, the
+ * actual number of the last GPIO is recorded by 'pxa_last_gpio'.
+ */
+extern int pxa_last_gpio;
+
+extern int pxa_init_gpio(int start, int end);
+
+#endif /* __PLAT_GPIO_H */
diff --git a/arch/arm/mach-pxa/include/plat/mfp.h b/arch/arm/mach-pxa/include/plat/mfp.h
new file mode 100644
index 0000000..857a683
--- /dev/null
+++ b/arch/arm/mach-pxa/include/plat/mfp.h
@@ -0,0 +1,468 @@
+/*
+ * arch/arm/plat-pxa/include/plat/mfp.h
+ *
+ * Common Multi-Function Pin Definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ *
+ * 2007-8-21: eric miao <eric.miao at marvell.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_PLAT_MFP_H
+#define __ASM_PLAT_MFP_H
+
+#define mfp_to_gpio(m) ((m) % 256)
+
+/* list of all the configurable MFP pins */
+enum {
+ MFP_PIN_INVALID = -1,
+
+ MFP_PIN_GPIO0 = 0,
+ MFP_PIN_GPIO1,
+ MFP_PIN_GPIO2,
+ MFP_PIN_GPIO3,
+ MFP_PIN_GPIO4,
+ MFP_PIN_GPIO5,
+ MFP_PIN_GPIO6,
+ MFP_PIN_GPIO7,
+ MFP_PIN_GPIO8,
+ MFP_PIN_GPIO9,
+ MFP_PIN_GPIO10,
+ MFP_PIN_GPIO11,
+ MFP_PIN_GPIO12,
+ MFP_PIN_GPIO13,
+ MFP_PIN_GPIO14,
+ MFP_PIN_GPIO15,
+ MFP_PIN_GPIO16,
+ MFP_PIN_GPIO17,
+ MFP_PIN_GPIO18,
+ MFP_PIN_GPIO19,
+ MFP_PIN_GPIO20,
+ MFP_PIN_GPIO21,
+ MFP_PIN_GPIO22,
+ MFP_PIN_GPIO23,
+ MFP_PIN_GPIO24,
+ MFP_PIN_GPIO25,
+ MFP_PIN_GPIO26,
+ MFP_PIN_GPIO27,
+ MFP_PIN_GPIO28,
+ MFP_PIN_GPIO29,
+ MFP_PIN_GPIO30,
+ MFP_PIN_GPIO31,
+ MFP_PIN_GPIO32,
+ MFP_PIN_GPIO33,
+ MFP_PIN_GPIO34,
+ MFP_PIN_GPIO35,
+ MFP_PIN_GPIO36,
+ MFP_PIN_GPIO37,
+ MFP_PIN_GPIO38,
+ MFP_PIN_GPIO39,
+ MFP_PIN_GPIO40,
+ MFP_PIN_GPIO41,
+ MFP_PIN_GPIO42,
+ MFP_PIN_GPIO43,
+ MFP_PIN_GPIO44,
+ MFP_PIN_GPIO45,
+ MFP_PIN_GPIO46,
+ MFP_PIN_GPIO47,
+ MFP_PIN_GPIO48,
+ MFP_PIN_GPIO49,
+ MFP_PIN_GPIO50,
+ MFP_PIN_GPIO51,
+ MFP_PIN_GPIO52,
+ MFP_PIN_GPIO53,
+ MFP_PIN_GPIO54,
+ MFP_PIN_GPIO55,
+ MFP_PIN_GPIO56,
+ MFP_PIN_GPIO57,
+ MFP_PIN_GPIO58,
+ MFP_PIN_GPIO59,
+ MFP_PIN_GPIO60,
+ MFP_PIN_GPIO61,
+ MFP_PIN_GPIO62,
+ MFP_PIN_GPIO63,
+ MFP_PIN_GPIO64,
+ MFP_PIN_GPIO65,
+ MFP_PIN_GPIO66,
+ MFP_PIN_GPIO67,
+ MFP_PIN_GPIO68,
+ MFP_PIN_GPIO69,
+ MFP_PIN_GPIO70,
+ MFP_PIN_GPIO71,
+ MFP_PIN_GPIO72,
+ MFP_PIN_GPIO73,
+ MFP_PIN_GPIO74,
+ MFP_PIN_GPIO75,
+ MFP_PIN_GPIO76,
+ MFP_PIN_GPIO77,
+ MFP_PIN_GPIO78,
+ MFP_PIN_GPIO79,
+ MFP_PIN_GPIO80,
+ MFP_PIN_GPIO81,
+ MFP_PIN_GPIO82,
+ MFP_PIN_GPIO83,
+ MFP_PIN_GPIO84,
+ MFP_PIN_GPIO85,
+ MFP_PIN_GPIO86,
+ MFP_PIN_GPIO87,
+ MFP_PIN_GPIO88,
+ MFP_PIN_GPIO89,
+ MFP_PIN_GPIO90,
+ MFP_PIN_GPIO91,
+ MFP_PIN_GPIO92,
+ MFP_PIN_GPIO93,
+ MFP_PIN_GPIO94,
+ MFP_PIN_GPIO95,
+ MFP_PIN_GPIO96,
+ MFP_PIN_GPIO97,
+ MFP_PIN_GPIO98,
+ MFP_PIN_GPIO99,
+ MFP_PIN_GPIO100,
+ MFP_PIN_GPIO101,
+ MFP_PIN_GPIO102,
+ MFP_PIN_GPIO103,
+ MFP_PIN_GPIO104,
+ MFP_PIN_GPIO105,
+ MFP_PIN_GPIO106,
+ MFP_PIN_GPIO107,
+ MFP_PIN_GPIO108,
+ MFP_PIN_GPIO109,
+ MFP_PIN_GPIO110,
+ MFP_PIN_GPIO111,
+ MFP_PIN_GPIO112,
+ MFP_PIN_GPIO113,
+ MFP_PIN_GPIO114,
+ MFP_PIN_GPIO115,
+ MFP_PIN_GPIO116,
+ MFP_PIN_GPIO117,
+ MFP_PIN_GPIO118,
+ MFP_PIN_GPIO119,
+ MFP_PIN_GPIO120,
+ MFP_PIN_GPIO121,
+ MFP_PIN_GPIO122,
+ MFP_PIN_GPIO123,
+ MFP_PIN_GPIO124,
+ MFP_PIN_GPIO125,
+ MFP_PIN_GPIO126,
+ MFP_PIN_GPIO127,
+
+ MFP_PIN_GPIO128,
+ MFP_PIN_GPIO129,
+ MFP_PIN_GPIO130,
+ MFP_PIN_GPIO131,
+ MFP_PIN_GPIO132,
+ MFP_PIN_GPIO133,
+ MFP_PIN_GPIO134,
+ MFP_PIN_GPIO135,
+ MFP_PIN_GPIO136,
+ MFP_PIN_GPIO137,
+ MFP_PIN_GPIO138,
+ MFP_PIN_GPIO139,
+ MFP_PIN_GPIO140,
+ MFP_PIN_GPIO141,
+ MFP_PIN_GPIO142,
+ MFP_PIN_GPIO143,
+ MFP_PIN_GPIO144,
+ MFP_PIN_GPIO145,
+ MFP_PIN_GPIO146,
+ MFP_PIN_GPIO147,
+ MFP_PIN_GPIO148,
+ MFP_PIN_GPIO149,
+ MFP_PIN_GPIO150,
+ MFP_PIN_GPIO151,
+ MFP_PIN_GPIO152,
+ MFP_PIN_GPIO153,
+ MFP_PIN_GPIO154,
+ MFP_PIN_GPIO155,
+ MFP_PIN_GPIO156,
+ MFP_PIN_GPIO157,
+ MFP_PIN_GPIO158,
+ MFP_PIN_GPIO159,
+ MFP_PIN_GPIO160,
+ MFP_PIN_GPIO161,
+ MFP_PIN_GPIO162,
+ MFP_PIN_GPIO163,
+ MFP_PIN_GPIO164,
+ MFP_PIN_GPIO165,
+ MFP_PIN_GPIO166,
+ MFP_PIN_GPIO167,
+ MFP_PIN_GPIO168,
+ MFP_PIN_GPIO169,
+ MFP_PIN_GPIO170,
+ MFP_PIN_GPIO171,
+ MFP_PIN_GPIO172,
+ MFP_PIN_GPIO173,
+ MFP_PIN_GPIO174,
+ MFP_PIN_GPIO175,
+ MFP_PIN_GPIO176,
+ MFP_PIN_GPIO177,
+ MFP_PIN_GPIO178,
+ MFP_PIN_GPIO179,
+ MFP_PIN_GPIO180,
+ MFP_PIN_GPIO181,
+ MFP_PIN_GPIO182,
+ MFP_PIN_GPIO183,
+ MFP_PIN_GPIO184,
+ MFP_PIN_GPIO185,
+ MFP_PIN_GPIO186,
+ MFP_PIN_GPIO187,
+ MFP_PIN_GPIO188,
+ MFP_PIN_GPIO189,
+ MFP_PIN_GPIO190,
+ MFP_PIN_GPIO191,
+
+ MFP_PIN_GPIO255 = 255,
+
+ MFP_PIN_GPIO0_2,
+ MFP_PIN_GPIO1_2,
+ MFP_PIN_GPIO2_2,
+ MFP_PIN_GPIO3_2,
+ MFP_PIN_GPIO4_2,
+ MFP_PIN_GPIO5_2,
+ MFP_PIN_GPIO6_2,
+ MFP_PIN_GPIO7_2,
+ MFP_PIN_GPIO8_2,
+ MFP_PIN_GPIO9_2,
+ MFP_PIN_GPIO10_2,
+ MFP_PIN_GPIO11_2,
+ MFP_PIN_GPIO12_2,
+ MFP_PIN_GPIO13_2,
+ MFP_PIN_GPIO14_2,
+ MFP_PIN_GPIO15_2,
+ MFP_PIN_GPIO16_2,
+ MFP_PIN_GPIO17_2,
+
+ MFP_PIN_ULPI_STP,
+ MFP_PIN_ULPI_NXT,
+ MFP_PIN_ULPI_DIR,
+
+ MFP_PIN_nXCVREN,
+ MFP_PIN_DF_CLE_nOE,
+ MFP_PIN_DF_nADV1_ALE,
+ MFP_PIN_DF_SCLK_E,
+ MFP_PIN_DF_SCLK_S,
+ MFP_PIN_nBE0,
+ MFP_PIN_nBE1,
+ MFP_PIN_DF_nADV2_ALE,
+ MFP_PIN_DF_INT_RnB,
+ MFP_PIN_DF_nCS0,
+ MFP_PIN_DF_nCS1,
+ MFP_PIN_nLUA,
+ MFP_PIN_nLLA,
+ MFP_PIN_DF_nWE,
+ MFP_PIN_DF_ALE_nWE,
+ MFP_PIN_DF_nRE_nOE,
+ MFP_PIN_DF_ADDR0,
+ MFP_PIN_DF_ADDR1,
+ MFP_PIN_DF_ADDR2,
+ MFP_PIN_DF_ADDR3,
+ MFP_PIN_DF_IO0,
+ MFP_PIN_DF_IO1,
+ MFP_PIN_DF_IO2,
+ MFP_PIN_DF_IO3,
+ MFP_PIN_DF_IO4,
+ MFP_PIN_DF_IO5,
+ MFP_PIN_DF_IO6,
+ MFP_PIN_DF_IO7,
+ MFP_PIN_DF_IO8,
+ MFP_PIN_DF_IO9,
+ MFP_PIN_DF_IO10,
+ MFP_PIN_DF_IO11,
+ MFP_PIN_DF_IO12,
+ MFP_PIN_DF_IO13,
+ MFP_PIN_DF_IO14,
+ MFP_PIN_DF_IO15,
+ MFP_PIN_DF_nCS0_SM_nCS2,
+ MFP_PIN_DF_nCS1_SM_nCS3,
+ MFP_PIN_SM_nCS0,
+ MFP_PIN_SM_nCS1,
+ MFP_PIN_DF_WEn,
+ MFP_PIN_DF_REn,
+ MFP_PIN_DF_CLE_SM_OEn,
+ MFP_PIN_DF_ALE_SM_WEn,
+ MFP_PIN_DF_RDY0,
+ MFP_PIN_DF_RDY1,
+
+ MFP_PIN_SM_SCLK,
+ MFP_PIN_SM_BE0,
+ MFP_PIN_SM_BE1,
+ MFP_PIN_SM_ADV,
+ MFP_PIN_SM_ADVMUX,
+ MFP_PIN_SM_RDY,
+
+ MFP_PIN_MMC1_DAT7,
+ MFP_PIN_MMC1_DAT6,
+ MFP_PIN_MMC1_DAT5,
+ MFP_PIN_MMC1_DAT4,
+ MFP_PIN_MMC1_DAT3,
+ MFP_PIN_MMC1_DAT2,
+ MFP_PIN_MMC1_DAT1,
+ MFP_PIN_MMC1_DAT0,
+ MFP_PIN_MMC1_CMD,
+ MFP_PIN_MMC1_CLK,
+ MFP_PIN_MMC1_CD,
+ MFP_PIN_MMC1_WP,
+
+ /* additional pins on PXA930 */
+ MFP_PIN_GSIM_UIO,
+ MFP_PIN_GSIM_UCLK,
+ MFP_PIN_GSIM_UDET,
+ MFP_PIN_GSIM_nURST,
+ MFP_PIN_PMIC_INT,
+ MFP_PIN_RDY,
+
+ MFP_PIN_MAX,
+};
+
+/*
+ * a possible MFP configuration is represented by a 32-bit integer
+ *
+ * bit 0.. 9 - MFP Pin Number (1024 Pins Maximum)
+ * bit 10..12 - Alternate Function Selection
+ * bit 13..15 - Drive Strength
+ * bit 16..18 - Low Power Mode State
+ * bit 19..20 - Low Power Mode Edge Detection
+ * bit 21..22 - Run Mode Pull State
+ *
+ * to facilitate the definition, the following macros are provided
+ *
+ * MFP_CFG_DEFAULT - default MFP configuration value, with
+ * alternate function = 0,
+ * drive strength = fast 3mA (MFP_DS03X)
+ * low power mode = default
+ * edge detection = none
+ *
+ * MFP_CFG - default MFPR value with alternate function
+ * MFP_CFG_DRV - default MFPR value with alternate function and
+ * pin drive strength
+ * MFP_CFG_LPM - default MFPR value with alternate function and
+ * low power mode
+ * MFP_CFG_X - default MFPR value with alternate function,
+ * pin drive strength and low power mode
+ */
+
+typedef unsigned long mfp_cfg_t;
+
+#define MFP_PIN(x) ((x) & 0x3ff)
+
+#define MFP_AF0 (0x0 << 10)
+#define MFP_AF1 (0x1 << 10)
+#define MFP_AF2 (0x2 << 10)
+#define MFP_AF3 (0x3 << 10)
+#define MFP_AF4 (0x4 << 10)
+#define MFP_AF5 (0x5 << 10)
+#define MFP_AF6 (0x6 << 10)
+#define MFP_AF7 (0x7 << 10)
+#define MFP_AF_MASK (0x7 << 10)
+#define MFP_AF(x) (((x) >> 10) & 0x7)
+
+#define MFP_DS01X (0x0 << 13)
+#define MFP_DS02X (0x1 << 13)
+#define MFP_DS03X (0x2 << 13)
+#define MFP_DS04X (0x3 << 13)
+#define MFP_DS06X (0x4 << 13)
+#define MFP_DS08X (0x5 << 13)
+#define MFP_DS10X (0x6 << 13)
+#define MFP_DS13X (0x7 << 13)
+#define MFP_DS_MASK (0x7 << 13)
+#define MFP_DS(x) (((x) >> 13) & 0x7)
+
+#define MFP_LPM_DEFAULT (0x0 << 16)
+#define MFP_LPM_DRIVE_LOW (0x1 << 16)
+#define MFP_LPM_DRIVE_HIGH (0x2 << 16)
+#define MFP_LPM_PULL_LOW (0x3 << 16)
+#define MFP_LPM_PULL_HIGH (0x4 << 16)
+#define MFP_LPM_FLOAT (0x5 << 16)
+#define MFP_LPM_INPUT (0x6 << 16)
+#define MFP_LPM_STATE_MASK (0x7 << 16)
+#define MFP_LPM_STATE(x) (((x) >> 16) & 0x7)
+
+#define MFP_LPM_EDGE_NONE (0x0 << 19)
+#define MFP_LPM_EDGE_RISE (0x1 << 19)
+#define MFP_LPM_EDGE_FALL (0x2 << 19)
+#define MFP_LPM_EDGE_BOTH (0x3 << 19)
+#define MFP_LPM_EDGE_MASK (0x3 << 19)
+#define MFP_LPM_EDGE(x) (((x) >> 19) & 0x3)
+
+#define MFP_PULL_NONE (0x0 << 21)
+#define MFP_PULL_LOW (0x1 << 21)
+#define MFP_PULL_HIGH (0x2 << 21)
+#define MFP_PULL_BOTH (0x3 << 21)
+#define MFP_PULL_FLOAT (0x4 << 21)
+#define MFP_PULL_MASK (0x7 << 21)
+#define MFP_PULL(x) (((x) >> 21) & 0x7)
+
+#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
+ MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
+
+#define MFP_CFG(pin, af) \
+ ((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\
+ (MFP_PIN(MFP_PIN_##pin) | MFP_##af))
+
+#define MFP_CFG_DRV(pin, af, drv) \
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\
+ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv))
+
+#define MFP_CFG_LPM(pin, af, lpm) \
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\
+ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm))
+
+#define MFP_CFG_X(pin, af, drv, lpm) \
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
+ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
+
+#if defined(CONFIG_PXA3xx) || defined(CONFIG_ARCH_MMP)
+/*
+ * each MFP pin will have a MFPR register, since the offset of the
+ * register varies between processors, the processor specific code
+ * should initialize the pin offsets by mfp_init()
+ *
+ * mfp_init_base() - accepts a virtual base for all MFPR registers and
+ * initialize the MFP table to a default state
+ *
+ * mfp_init_addr() - accepts a table of "mfp_addr_map" structure, which
+ * represents a range of MFP pins from "start" to "end", with the offset
+ * begining at "offset", to define a single pin, let "end" = -1.
+ *
+ * use
+ *
+ * MFP_ADDR_X() to define a range of pins
+ * MFP_ADDR() to define a single pin
+ * MFP_ADDR_END to signal the end of pin offset definitions
+ */
+struct mfp_addr_map {
+ unsigned int start;
+ unsigned int end;
+ unsigned long offset;
+};
+
+#define MFP_ADDR_X(start, end, offset) \
+ { MFP_PIN_##start, MFP_PIN_##end, offset }
+
+#define MFP_ADDR(pin, offset) \
+ { MFP_PIN_##pin, -1, offset }
+
+#define MFP_ADDR_END { MFP_PIN_INVALID, 0 }
+
+void __init mfp_init_base(unsigned long mfpr_base);
+void __init mfp_init_addr(struct mfp_addr_map *map);
+
+/*
+ * mfp_{read, write}() - for direct read/write access to the MFPR register
+ * mfp_config() - for configuring a group of MFPR registers
+ * mfp_config_lpm() - configuring all low power MFPR registers for suspend
+ * mfp_config_run() - configuring all run time MFPR registers after resume
+ */
+unsigned long mfp_read(int mfp);
+void mfp_write(int mfp, unsigned long mfpr_val);
+void mfp_config(unsigned long *mfp_cfgs, int num);
+void mfp_config_run(void);
+void mfp_config_lpm(void);
+#endif /* CONFIG_PXA3xx || CONFIG_ARCH_MMP */
+
+#endif /* __ASM_PLAT_MFP_H */
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
new file mode 100644
index 0000000..e03cf16
--- /dev/null
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -0,0 +1,189 @@
+/*
+ * linux/arch/arm/mach-pxa/mfp-pxa2xx.c
+ *
+ * PXA2xx pin mux configuration support
+ *
+ * The GPIOs on PXA2xx can be configured as one of many alternate
+ * functions, this is by concept samilar to the MFP configuration
+ * on PXA3xx, what's more important, the low power pin state and
+ * wakeup detection are also supported by the same framework.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <init.h>
+
+#include <mach/gpio.h>
+#include <mach/hardware.h>
+#include <mach/mfp-pxa2xx.h>
+#include <mach/pxa-regs.h>
+
+#define PGSR(x) __REG2(0x40F00020, (x) << 2)
+#define __GAFR(u, x) __REG2((u) ? 0x40E00058 : 0x40E00054, (x) << 3)
+#define GAFR_L(x) __GAFR(0, x)
+#define GAFR_U(x) __GAFR(1, x)
+
+struct gpio_desc {
+ unsigned valid : 1;
+ unsigned dir_inverted : 1;
+ unsigned long config;
+};
+
+static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1];
+
+static unsigned long gpdr_lpm[4];
+
+static int __mfp_config_gpio(unsigned gpio, unsigned long c)
+{
+ unsigned long gafr, mask = GPIO_bit(gpio);
+ int bank = gpio_to_bank(gpio);
+ int uorl = !!(gpio & 0x10); /* GAFRx_U or GAFRx_L ? */
+ int shft = (gpio & 0xf) << 1;
+ int fn = MFP_AF(c);
+ int is_out = (c & MFP_DIR_OUT) ? 1 : 0;
+
+ if (fn > 3)
+ return -EINVAL;
+
+ /* alternate function and direction at run-time */
+ gafr = (uorl == 0) ? GAFR_L(bank) : GAFR_U(bank);
+ gafr = (gafr & ~(0x3 << shft)) | (fn << shft);
+
+ if (uorl == 0)
+ GAFR_L(bank) = gafr;
+ else
+ GAFR_U(bank) = gafr;
+
+ if (is_out ^ gpio_desc[gpio].dir_inverted)
+ GPDR(gpio) |= mask;
+ else
+ GPDR(gpio) &= ~mask;
+
+ /* alternate function and direction at low power mode */
+ switch (c & MFP_LPM_STATE_MASK) {
+ case MFP_LPM_DRIVE_HIGH:
+ PGSR(bank) |= mask;
+ is_out = 1;
+ break;
+ case MFP_LPM_DRIVE_LOW:
+ PGSR(bank) &= ~mask;
+ is_out = 1;
+ break;
+ case MFP_LPM_DEFAULT:
+ break;
+ default:
+ /* warning and fall through, treat as MFP_LPM_DEFAULT */
+ pr_warning("%s: GPIO%d: unsupported low power mode\n",
+ __func__, gpio);
+ break;
+ }
+
+ if (is_out ^ gpio_desc[gpio].dir_inverted)
+ gpdr_lpm[bank] |= mask;
+ else
+ gpdr_lpm[bank] &= ~mask;
+
+ return 0;
+}
+
+static inline int __mfp_validate(int mfp)
+{
+ int gpio = mfp_to_gpio(mfp);
+
+ if ((mfp > MFP_PIN_GPIO127) || !gpio_desc[gpio].valid) {
+ pr_warning("%s: GPIO%d is invalid pin\n", __func__, gpio);
+ return -1;
+ }
+
+ return gpio;
+}
+
+void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
+{
+ unsigned long *c;
+ int i, gpio;
+
+ for (i = 0, c = mfp_cfgs; i < num; i++, c++) {
+
+ gpio = __mfp_validate(MFP_PIN(*c));
+ if (gpio < 0)
+ continue;
+
+ gpio_desc[gpio].config = *c;
+ __mfp_config_gpio(gpio, *c);
+ }
+}
+
+void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm)
+{
+ unsigned long c;
+ int gpio;
+
+ gpio = __mfp_validate(mfp);
+ if (gpio < 0)
+ return;
+
+ c = gpio_desc[gpio].config;
+ c = (c & ~MFP_LPM_STATE_MASK) | lpm;
+ __mfp_config_gpio(gpio, c);
+}
+
+static void __init pxa25x_mfp_init(void)
+{
+ int i;
+
+ for (i = 0; i <= pxa_last_gpio; i++)
+ gpio_desc[i].valid = 1;
+
+ /* PXA26x has additional 4 GPIOs (86/87/88/89) which has the
+ * direction bit inverted in GPDR2. See PXA26x DM 4.1.1.
+ */
+ for (i = 86; i <= pxa_last_gpio; i++)
+ gpio_desc[i].dir_inverted = 1;
+}
+
+static void __init pxa27x_mfp_init(void)
+{
+ int i;
+
+ for (i = 0; i <= pxa_last_gpio; i++) {
+ /*
+ * skip GPIO2, 5, 6, 7, 8, they are not
+ * valid pins allow configuration
+ */
+ if (i == 2 || i == 5 || i == 6 || i == 7 || i == 8)
+ continue;
+
+ gpio_desc[i].valid = 1;
+ }
+}
+
+static int __init pxa2xx_mfp_init(void)
+{
+ int i;
+
+ if (!cpu_is_pxa2xx())
+ return 0;
+
+ if (cpu_is_pxa25x())
+ pxa25x_mfp_init();
+
+ if (cpu_is_pxa27x()) {
+ pxa_init_gpio(2, 120);
+ pxa27x_mfp_init();
+ }
+
+ /* clear RDH bit to enable GPIO receivers after reset/sleep exit */
+ PSSR = PSSR_RDH;
+
+ /* initialize gafr_run[], pgsr_lpm[] from existing values */
+ for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++)
+ gpdr_lpm[i] = GPDR(i * 32);
+
+ return 0;
+}
+postcore_initcall(pxa2xx_mfp_init);
diff --git a/arch/arm/mach-pxa/speed-pxa27x.c b/arch/arm/mach-pxa/speed-pxa27x.c
new file mode 100644
index 0000000..e8d147f
--- /dev/null
+++ b/arch/arm/mach-pxa/speed-pxa27x.c
@@ -0,0 +1,20 @@
+/*
+ * clock.h - implementation of the PXA clock functions
+ *
+ * Copyright (C) 2010 by Marc Kleine-Budde <mkl at pengutronix.de>
+ *
+ * This file is released under the GPLv2
+ *
+ */
+
+#include <common.h>
+#include <mach/clock.h>
+#include <mach/pxa-regs.h>
+
+/* Crystal clock: 13MHz */
+#define BASE_CLK 13000000
+
+unsigned long pxa_get_uartclk(void)
+{
+ return 14857000;
+}
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index c2bee79..592d543 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -92,4 +92,8 @@ config DRIVER_SERIAL_S3C24X0_AUTOSYNC
Say Y here if you want to use the auto flow feature of this
UART. RTS and CTS will be handled by the hardware when enabled.
+config DRIVER_SERIAL_PXA
+ bool "PXA serial driver"
+ depends on ARCH_PXA
+
endmenu
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 411b8c5..a702125 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -18,3 +18,4 @@ obj-$(CONFIG_DRIVER_SERIAL_PL010) += serial_pl010.o
obj-$(CONFIG_DRIVER_SERIAL_S3C24X0) += serial_s3c24x0.o
obj-$(CONFIG_DRIVER_SERIAL_ALTERA) += serial_altera.o
obj-$(CONFIG_DRIVER_SERIAL_ALTERA_JTAG) += serial_altera_jtag.o
+obj-$(CONFIG_DRIVER_SERIAL_PXA) += serial_pxa.o
diff --git a/drivers/serial/serial_pxa.c b/drivers/serial/serial_pxa.c
new file mode 100644
index 0000000..7927032
--- /dev/null
+++ b/drivers/serial/serial_pxa.c
@@ -0,0 +1,205 @@
+/*
+ * (c) 2009 Sascha Hauer <s.hauer at pengutronix.de>
+ * 2010 by Marc Kleine-Budde <kernel at pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <driver.h>
+#include <init.h>
+#include <malloc.h>
+
+#include <mach/clock.h>
+#include <asm/io.h>
+
+#define RBR 0x00 /* Receive Buffer Register (read only) */
+#define THR 0x00 /* Transmit Holding Register (write only) */
+#define IER 0x04 /* Interrupt Enable Register (read/write) */
+#define IIR 0x08 /* Interrupt ID Register (read only) */
+#define FCR 0x08 /* FIFO Control Register (write only) */
+#define LCR 0x0c /* Line Control Register (read/write) */
+#define MCR 0x10 /* Modem Control Register (read/write) */
+#define LSR 0x14 /* Line Status Register (read only) */
+#define MSR 0x18 /* Modem Status Register (read only) */
+#define SPR 0x1c /* Scratch Pad Register (read/write) */
+#define ISR 0x20 /* Infrared Selection Register (read/write) */
+#define DLL 0x00 /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define DLH 0x04 /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+#define IER_DMAE (1 << 7) /* DMA Requests Enable */
+#define IER_UUE (1 << 6) /* UART Unit Enable */
+#define IER_NRZE (1 << 5) /* NRZ coding Enable */
+#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */
+#define IER_MIE (1 << 3) /* Modem Interrupt Enable */
+#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */
+#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */
+#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */
+
+#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */
+#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */
+#define IIR_TOD (1 << 3) /* Time Out Detected */
+#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */
+#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */
+#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */
+
+#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */
+#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */
+#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */
+#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */
+#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */
+#define FCR_ITL_1 (0)
+#define FCR_ITL_8 (FCR_ITL1)
+#define FCR_ITL_16 (FCR_ITL2)
+#define FCR_ITL_32 (FCR_ITL2| F CR_ITL1)
+
+#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */
+#define LCR_SB (1 << 6) /* Set Break */
+#define LCR_STKYP (1 << 5) /* Sticky Parity */
+#define LCR_EPS (1 << 4) /* Even Parity Select */
+#define LCR_PEN (1 << 3) /* Parity Enable */
+#define LCR_STB (1 << 2) /* Stop Bit */
+#define LCR_WLS1 (1 << 1) /* Word Length Select */
+#define LCR_WLS0 (1 << 0) /* Word Length Select */
+#define LCR_WLEN8 (LCR_WLS1 | LCR_WLS0)
+ /* Wordlength: 8 bits */
+
+#define LSR_FIFOE (1 << 7) /* FIFO Error Status */
+#define LSR_TEMT (1 << 6) /* Transmitter Empty */
+#define LSR_TDRQ (1 << 5) /* Transmit Data Request */
+#define LSR_BI (1 << 4) /* Break Interrupt */
+#define LSR_FE (1 << 3) /* Framing Error */
+#define LSR_PE (1 << 2) /* Parity Error */
+#define LSR_OE (1 << 1) /* Overrun Error */
+#define LSR_DR (1 << 0) /* Data Ready */
+
+#define MCR_LOOP (1 << 4) /* */
+#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */
+#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */
+#define MCR_RTS (1 << 1) /* Request to Send */
+#define MCR_DTR (1 << 0) /* Data Terminal Ready */
+
+#define MSR_DCD (1 << 7) /* Data Carrier Detect */
+#define MSR_RI (1 << 6) /* Ring Indicator */
+#define MSR_DSR (1 << 5) /* Data Set Ready */
+#define MSR_CTS (1 << 4) /* Clear To Send */
+#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */
+#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */
+#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */
+#define MSR_DCTS (1 << 0) /* Delta Clear To Send */
+
+struct pxa_serial_priv {
+ void __iomem *regs;
+ struct console_device cdev;
+};
+
+static void __iomem *to_regs(struct console_device *cdev)
+{
+ struct pxa_serial_priv *priv =
+ container_of(cdev, struct pxa_serial_priv, cdev);
+ return priv->regs;
+}
+
+static void pxa_serial_putc(struct console_device *cdev, char c)
+{
+ while (!(readl(to_regs(cdev) + LSR) & LSR_TEMT));
+
+ writel(c, to_regs(cdev) + THR);
+}
+
+static int pxa_serial_tstc(struct console_device *cdev)
+{
+ return readl(to_regs(cdev) + LSR) & LSR_DR;
+}
+
+static int pxa_serial_getc(struct console_device *cdev)
+{
+ while (!(readl(to_regs(cdev) + LSR) & LSR_DR));
+
+ return readl(to_regs(cdev) + RBR) & 0xff;
+}
+
+static void pxa_serial_flush(struct console_device *cdev)
+{
+}
+
+static int pxa_serial_setbaudrate(struct console_device *cdev, int baudrate)
+{
+ unsigned char cval = LCR_WLEN8; /* 8N1 */
+ unsigned int quot;
+
+ /* enable uart */
+ writel(IER_UUE, to_regs(cdev) + IER);
+
+ /* write divisor */
+ quot = (pxa_get_uartclk() + (8 * baudrate)) / (16 * baudrate);
+
+ writel(cval | LCR_DLAB, to_regs(cdev) + LCR); /* set DLAB */
+ writel(quot & 0xff, to_regs(cdev) + DLL);
+ /*
+ * work around Errata #75 according to Intel(R) PXA27x
+ * Processor Family Specification Update (Nov 2005)
+ */
+ readl(to_regs(cdev) + DLL);
+ writel(quot >> 8, to_regs(cdev) + DLH);
+ writel(cval, to_regs(cdev) + LCR); /* reset DLAB */
+
+ /* enable fifos */
+ writel(FCR_TRFIFOE, to_regs(cdev) + FCR);
+
+ return 0;
+}
+
+static int pxa_serial_probe(struct device_d *dev)
+{
+ struct console_device *cdev;
+ struct pxa_serial_priv *priv;
+
+ priv = malloc(sizeof(*priv));
+ cdev = &priv->cdev;
+ priv->regs = dev_request_mem_region(dev, 0);
+
+ dev->type_data = cdev;
+ cdev->dev = dev;
+ cdev->f_caps = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR;
+ cdev->tstc = pxa_serial_tstc;
+ cdev->putc = pxa_serial_putc;
+ cdev->getc = pxa_serial_getc;
+ cdev->flush = pxa_serial_flush;
+ cdev->setbrg = pxa_serial_setbaudrate;
+
+ console_register(cdev);
+
+ return 0;
+}
+
+static void pxa_serial_remove(struct device_d *dev)
+{
+ free(dev->type_data);
+}
+
+static struct driver_d pxa_serial_driver = {
+ .name = "pxa_serial",
+ .probe = pxa_serial_probe,
+ .remove = pxa_serial_remove,
+};
+
+static int pxa_serial_init(void)
+{
+ return register_driver(&pxa_serial_driver);
+}
+
+console_initcall(pxa_serial_init);
--
1.7.5.4
More information about the barebox
mailing list