October 2016 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sun Oct 2 09:03:45 PDT 2016
Ending: Mon Oct 31 09:48:49 PDT 2016
Messages: 125

• [PATCH] ath10k: enable peer stats by default   Yeoh Chun-Yeow
• [PATCH 2/2] ath10k: add platform regulatory domain support   Bartosz Markowski
  • [PATCH 2/2] ath10k: add platform regulatory domain support   Valo, Kalle
• [PATCH] ath10k: cache calibration data when the core is stopped.   Valo, Kalle
  • [PATCH] ath10k: cache calibration data when the core is stopped.   Valo, Kalle
  • [PATCH] ath10k: cache calibration data when the core is stopped.   Michal Kazior
    • [PATCH] ath10k: cache calibration data when the core is stopped.   Marty Faltesek
  • [PATCH] ath10k: cache calibration data when the core is stopped.   Marty Faltesek
    • [PATCH] ath10k: cache calibration data when the core is stopped.   Valo, Kalle
      • [PATCH] ath10k: cache calibration data when the core is stopped.   Marty Faltesek
• Beacon sending information   Ricardo Santos
  • Beacon sending information   Michal Kazior
• [PATCH 0/2] ath10k: Trivial cleanup in HTT tx buffer allocation   Mohammed Shafi Shajakhan
  • [PATCH 1/2] ath10k: clean up HTT tx buffer allocation and free   Mohammed Shafi Shajakhan
    • [1/2] ath10k: clean up HTT tx buffer allocation and free   Kalle Valo
      • [1/2] ath10k: clean up HTT tx buffer allocation and free   Mohammed Shafi Shajakhan
  • [PATCH 2/2] ath10k: Remove extraneous error message in tx alloc   Mohammed Shafi Shajakhan
• ath10k: Provide provision to get Transmit Power Control stats for 10.4   Kalle Valo
• ath10k: add cc_wraparound type for QCA9888 and QCA9884   Kalle Valo
• [1/2] ath: export alpha2 helper   Kalle Valo
• [PATCHv3,5/5] ath10k: Allow setting coverage class   Kalle Valo
• ath10k: Cleanup calling ath10k_htt_rx_h_unchain   Kalle Valo
  • ath10k: Cleanup calling ath10k_htt_rx_h_unchain   Mohammed Shafi Shajakhan
• [2/4] ath10k: implement offset_tsf ieee80211_op   Kalle Valo
• [PATCH v2] ath10k: Cleanup calling ath10k_htt_rx_h_unchain   Mohammed Shafi Shajakhan
  • [PATCH v2] ath10k: Cleanup calling ath10k_htt_rx_h_unchain   Valo, Kalle
• Latest stable ath10k driver   Bonev, George
  • Latest stable ath10k driver   Valo, Kalle
• ath10k: device stops working ("failed to install key for vdev" error in kernel log)   Martin Blumenstingl
  • ath10k: device stops working ("failed to install key for vdev" error in kernel log)   Ben Greear
    • ath10k: device stops working ("failed to install key for vdev" error in kernel log)   Martin Blumenstingl
      • ath10k: device stops working ("failed to install key for vdev" error in kernel log)   Ben Greear
• [PATCH v2] ath10k: cache calibration data when the core is stopped   Marty Faltesek
  • [PATCH v2] ath10k: cache calibration data when the core is stopped   Valo, Kalle
    • [PATCH v2] ath10k: cache calibration data when the core is stopped   Marty Faltesek
      • [PATCH v2] ath10k: cache calibration data when the core is stopped   Valo, Kalle
• ath10k: about packet injection   Xuebing Wang
  • ath10k: about packet injection   Michal Kazior
• Very low throughput on QCA9880 ath10k module   Vijay Kumar R Patel
  • Very low throughput on QCA9880 ath10k module   Valo, Kalle
• [PATCH v2 1/2] ath10k: clean up HTT tx buffer allocation and free   Mohammed Shafi Shajakhan
  • [PATCH v2 2/2] ath10k: Remove extraneous error message in tx alloc   Mohammed Shafi Shajakhan
  • [v2,1/2] ath10k: clean up HTT tx buffer allocation and free   Kalle Valo
    • [v2,1/2] ath10k: clean up HTT tx buffer allocation and free   Mohammed Shafi Shajakhan
      • [v2,1/2] ath10k: clean up HTT tx buffer allocation and free   Valo, Kalle
• [ath6kl:pending 52/54] drivers/net/wireless/ath/ath10k/wmi-tlv.c:3520:20: error: initialization from incompatible pointer type   kbuild test robot
• [ath6kl:pending 52/54] drivers/net/wireless/ath/ath10k/wmi-tlv.c:3520:2: warning: initialization from incompatible pointer type   kbuild test robot
• QCA9887 Firmware Memory Usage   David Hutchison
  • QCA9887 Firmware Memory Usage   Valo, Kalle
    • QCA9887 Firmware Memory Usage   Sebastian Gottschall
• [PATCH 0/2] ath10k: add support for tx bitrate   akolli at qti.qualcomm.com
  • [PATCH 1/2] ath10k: add per peer htt tx stats support for 10.4   akolli at qti.qualcomm.com
    • [PATCH 1/2] ath10k: add per peer htt tx stats support for 10.4   Yeoh Chun-Yeow
      • [PATCH 1/2] ath10k: add per peer htt tx stats support for 10.4   Valo, Kalle
      • [PATCH 1/2] ath10k: add per peer htt tx stats support for 10.4   Yeoh Chun-Yeow
      • [PATCH 1/2] ath10k: add per peer htt tx stats support for 10.4   Valo, Kalle
    • [PATCH 1/2] ath10k: add per peer htt tx stats support for 10.4   Valo, Kalle
      • [PATCH 1/2] ath10k: add per peer htt tx stats support for 10.4   akolli at codeaurora.org
  • [PATCH 2/2] ath10k: add support for per sta tx bitrate   akolli at qti.qualcomm.com
• Re: new experience   bunkertor
• [PATCH] ath10k: Fix kernel panic due to race in accessing arvif list   Vasanthakumar Thiagarajan
  • ath10k: Fix kernel panic due to race in accessing arvif list   Kalle Valo
• [PATCH v3] ath10k: cache calibration data when the core is stopped   Kalle Valo
  • [v3] ath10k: cache calibration data when the core is stopped   Kalle Valo
  • [v3] ath10k: cache calibration data when the core is stopped   Kalle Valo
• [PATCH] QCA9984 VHT160 support   Valo, Kalle
  • [PATCH] QCA9984 VHT160 support   Valo, Kalle
    • [PATCH] QCA9984 VHT160 support   Sebastian Gottschall
      • [PATCH] QCA9984 VHT160 support   Valo, Kalle
  • [PATCH] QCA9984 VHT160 support   Valo, Kalle
    • [PATCH] QCA9984 VHT160 support   Sebastian Gottschall
      • [PATCH] QCA9984 VHT160 support   Sebastian Gottschall
• QCA988x:ath10K in STA mode: Probe_Req() frame is NOT sent over the air, when the device is NOT set to scan_mode   Ganesh Prasadh
• how to configure MIMO   Gyselinck Luc
  • how to configure MIMO   Sebastian Gottschall
• [PATCH] ath10k: Fix failure to send NULL func frame for 10.4   Mohammed Shafi Shajakhan
• [PATCH v3 1/2] ath10k: clean up HTT tx buffer allocation and free   Mohammed Shafi Shajakhan
  • [PATCH v3 2/2] ath10k: Remove extraneous error message in tx alloc   Mohammed Shafi Shajakhan
• qca6174 missing firmware or subsystem id?   Jiří Prchal
  • qca6174 missing firmware or subsystem id?   Valo, Kalle
    • qca6174 missing firmware or subsystem id?   Jiří Prchal
      • qca6174 missing firmware or subsystem id?   Valo, Kalle
      • qca6174 missing firmware or subsystem id?   Jiří Prchal
      • qca6174 missing firmware or subsystem id?   Michal Kazior
      • qca6174 missing firmware or subsystem id?   Jiří Prchal
• ath10k: fix debug cal data file   Kalle Valo
• [PATCH v2 0/2] ath10k: add VHT160 support   Kalle Valo
  • [PATCH v2 1/2] ath10k: refactor ath10k_peer_assoc_h_phymode()   Kalle Valo
  • [PATCH v2 2/2] ath10k: add VHT160 support   Kalle Valo
    • [PATCH v2 2/2] ath10k: add VHT160 support   Valo, Kalle
• [RFC 0/5] ath6kl: non WMI data service support   Valo, Kalle
  • [RFC 0/5] ath6kl: non WMI data service support   Valo, Kalle
• [PATCHv2 0/2] ath10k: add support for tx bitrate   akolli at qti.qualcomm.com
  • [PATCHv2 0/2] ath10k: add support for tx bitrate   akolli at qti.qualcomm.com
    • [PATCH 1/2] ath10k: add per peer htt tx stats support for 10.4   akolli at qti.qualcomm.com
  • [PATCHv2 0/2] ath10k: add support for tx bitrate   akolli at qti.qualcomm.com
    • [PATCHv2 1/2] ath10k: add per peer htt tx stats support for 10.4   akolli at qti.qualcomm.com
    • [PATCHv2 2/2] ath10k: add support for per sta tx bitrate   akolli at qti.qualcomm.com
• Connection to WPA-PSK/WPA2-PSK networks doesn't work with QCA9733 rev 30   Markus Mälkönen
• QCA9888 fails to work with latest linux-ath tree, crashes kernel on rmmod.   Ben Greear
  • QCA9888 fails to work with latest linux-ath tree, crashes kernel on rmmod.   Ben Greear
    • QCA9888 fails to work with latest linux-ath tree, crashes kernel on rmmod.   Mohammed Shafi Shajakhan
      • QCA9888 fails to work with latest linux-ath tree, crashes kernel on rmmod.   Mohammed Shafi Shajakhan
      • QCA9888 fails to work with latest linux-ath tree, crashes kernel on rmmod.   Mohammed Shafi Shajakhan
      • QCA9888 fails to work with latest linux-ath tree, crashes kernel on rmmod.   Ben Greear
      • QCA9888 fails to work with latest linux-ath tree, crashes kernel on rmmod.   Mohammed Shafi Shajakhan
• Direct firmware load failed with error 2   cmckay at abineau.com
  • Direct firmware load failed with error 2   Ben Greear
    • Direct firmware load failed with error 2   cmckay at abineau.com
      • Direct firmware load failed with error 2   Ben Greear
      • Direct firmware load failed with error 2   cmckay at abineau.com
      • Direct firmware load failed with error 2   Ben Greear
      • Direct firmware load failed with error 2   cmckay at abineau.com
      • Direct firmware load failed with error 2   cmckay at abineau.com
      • Direct firmware load failed with error 2   Ben Greear
      • Direct firmware load failed with error 2   Marek Puzyniak
      • Direct firmware load failed with error 2   Colin McKay
      • Direct firmware load failed with error 2   Marek Puzyniak
• MTU size of Ath10k   Jorge Baranda
• [ath6kl:master 3/3] arch/x86/lib/memcpy_64.S:277: Error: invalid character '(' in mnemonic   kbuild test robot
• Linux freezes after a time while running   Conrad Kostecki
  • Linux freezes after a time while running   Michal Kazior
    • Linux freezes after a time while running   Conrad Kostecki
• [PATCH 1/1] ath10k: use the right length of "background"   Nicolas Iooss
• [BUG] Kernel crashes with ath10k radio and Nexus 5X clients   Timo Sigurdsson

Last message date: Mon Oct 31 09:48:49 PDT 2016
Archived on: Mon Oct 31 09:50:12 PDT 2016

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...