April 2016 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Fri Apr 1 01:01:24 PDT 2016
Ending: Sat Apr 30 22:23:39 PDT 2016
Messages: 212

• [RFC] ath10k: implement dql for htt tx   Michal Kazior
• [PATCH 3/3] ath10k: Add BUG_ON if we over-write peer-map pointer.   Ben Greear
• [PATCH 1/3] ath10k: Ensure txrx-compl-task is stopped when cleaning htt-tx.   Ben Greear
• [PATCH v2 1/5] ath10k: Ensure txrx-compl-task is stopped when cleaning htt-tx.   greearb at candelatech.com
  • [PATCH v2 3/5] ath10k: Add WARN_ON if we over-write peer-map pointer.   greearb at candelatech.com
  • [PATCH v2 4/5] ath10k: Clean up peer when sta goes away.   greearb at candelatech.com
  • [PATCH v2 5/5] ath10k: Fix deadlock when peer cannot be created.   greearb at candelatech.com
• [PATCH v2 2/5] ath10k: Ensure peer_map references are cleaned up.   greearb at candelatech.com
• Trouble with multiple cards   Matthew Keeler
  • Trouble with multiple cards   Michal Kazior
    • Trouble with multiple cards   Matthew Keeler
      • Trouble with multiple cards   Michal Kazior
      • Trouble with multiple cards   Matthew Keeler
• Troubles with ath10k and QCA9882 Chipset   Stefan Feirer
  • Troubles with ath10k and QCA9882 Chipset   Michal Kazior
• [PATCH v1 1/3] ath10k: Enable debugfs provision to enable Peer Stats feature   Valo, Kalle
• [PATCH 0/9] ath10k: improve throughput performance   Valo, Kalle
• [PATCH v2] ath10k: parse Rx MAC timestamp in mgmt frame for FW 10.4   Valo, Kalle
• [PATCH 0/3] ath10k: add a support of set_tsf on vdev interface   Peter Oh
  • [PATCH 1/3] ath10k: add a support of set_tsf on vdev interface   Peter Oh
  • [PATCH 2/3] ath10k: update 10.4 WMI vdev parameters   Peter Oh
  • [PATCH 3/3] ath10k: enable set_tsf vdev command to WMI 10.4   Peter Oh
  • [PATCH 0/3] ath10k: add a support of set_tsf on vdev interface   Valo, Kalle
• [PATCH v3] cfg80211/nl80211: Add support for NL80211_STA_INFO_RX_DURATION   Johannes Berg
  • [PATCH v3] cfg80211/nl80211: Add support for NL80211_STA_INFO_RX_DURATION   Mohammed Shafi Shajakhan
• [PATCH 1/3] ath10k: fix calibration init sequence of qca99x0   Valo, Kalle
  • [PATCH 1/3] ath10k: fix calibration init sequence of qca99x0   Rajkumar Manoharan
• [PATCH 3/3] ath10k: fix unconditional num_mpdus_ready subtraction   Valo, Kalle
  • [PATCH 3/3] ath10k: fix unconditional num_mpdus_ready subtraction   Valo, Kalle
    • [PATCH 3/3] ath10k: fix unconditional num_mpdus_ready subtraction   Rajkumar Manoharan
• [PATCH] ath10k: remove MSI range support   Valo, Kalle
  • [PATCH] ath10k: remove MSI range support   Rajkumar Manoharan
• [PATCH] ath10k: Fix deadlock when peer cannot be created.   Valo, Kalle
• [PATCH] ath10k: Fix return value for btcoex and peer stats debugfs   Mohammed Shafi Shajakhan
  • [PATCH] ath10k: Fix return value for btcoex and peer stats debugfs   Joe Perches
    • [PATCH] ath10k: Fix return value for btcoex and peer stats debugfs   Mohammed Shafi Shajakhan
  • [PATCH] ath10k: Fix return value for btcoex and peer stats debugfs   Valo, Kalle
    • [PATCH] ath10k: Fix return value for btcoex and peer stats debugfs   Shajakhan, Mohammed Shafi (Mohammed Shafi)
• [PATCH 0/8] ath10k: refactor firmware components   Kalle Valo
  • [PATCH 1/8] ath10k: remove deprecated firmware API 1 support   Kalle Valo
    • [PATCH 1/8] ath10k: remove deprecated firmware API 1 support   Valo, Kalle
  • [PATCH 2/8] ath10k: refactor firmware images to struct ath10k_fw_components   Kalle Valo
  • [PATCH 3/8] ath10k: move fw_version inside struct ath10k_fw_file   Kalle Valo
  • [PATCH 4/8] ath10k: move fw_features to struct ath10k_fw_file   Kalle Valo
  • [PATCH 5/8] ath10k: move wmi_op_version to struct ath10k_fw_file   Kalle Valo
  • [PATCH 6/8] ath10k: move htt_op_version to struct ath10k_fw_file   Kalle Valo
  • [PATCH 7/8] ath10k: switch testmode to use ath10k_core_fetch_firmware_api_n()   Kalle Valo
  • [PATCH 8/8] ath10k: remove enum ath10k_swap_code_seg_bin_type   Kalle Valo
• [PATCH 3/4] ath10k: prefer ether_addr_equal() or ether_addr_equal_unaligned() over memcmp()   Valo, Kalle
• [PATCH v2 1/3] ath10k: fix calibration init sequence of qca99x0   Rajkumar Manoharan
  • [PATCH v2 2/3] ath10k: remove unnecessary warning for probe response drops   Rajkumar Manoharan
  • [PATCH v2 3/3] ath10k: fix unconditional num_mpdus_ready subtraction   Rajkumar Manoharan
  • [PATCH v2 1/3] ath10k: fix calibration init sequence of qca99x0   Valo, Kalle
• [PATCH v2] ath10k: remove MSI range support   Rajkumar Manoharan
  • [PATCH v2] ath10k: remove MSI range support   Valo, Kalle
• [PATCH] ath10k: fix rx_channel during hw reconfigure   Rajkumar Manoharan
  • [PATCH] ath10k: fix rx_channel during hw reconfigure   Valo, Kalle
• Kernel crash when ath10k 10.4.3 firmware crashes in TCP download test.   Ben Greear
• ath10k performance, master branch from 20160407   Roman Yeryomin
  • ath10k performance, master branch from 20160407   Manoharan, Rajkumar
    • ath10k performance, master branch from 20160407   Roman Yeryomin
      • ath10k performance, master branch from 20160407   Manoharan, Rajkumar
      • ath10k performance, master branch from 20160407   Roman Yeryomin
      • ath10k performance, master branch from 20160407   Manoharan, Rajkumar
      • ath10k performance, master branch from 20160407   Roman Yeryomin
      • ath10k performance, master branch from 20160407   Roman Yeryomin
      • ath10k performance, master branch from 20160407   Manoharan, Rajkumar
      • ath10k performance, master branch from 20160407   Roman Yeryomin
      • ath10k performance, master branch from 20160407   Roman Yeryomin
      • ath10k performance, master branch from 20160407   Michal Kazior
      • ath10k performance, master branch from 20160407   Roman Yeryomin
      • ath10k performance, master branch from 20160407   Michal Kazior
      • ath10k performance, master branch from 20160407   Valo, Kalle
      • ath10k performance, master branch from 20160407   Roman Yeryomin
      • ath10k performance, master branch from 20160407   Roman Yeryomin
      • ath10k performance, master branch from 20160407   Roman Yeryomin
      • ath10k performance, master branch from 20160407   Michal Kazior
      • ath10k performance, master branch from 20160407   Xue Liu
• ath10k: implement updating shared htt txq state   Dan Carpenter
  • ath10k: implement updating shared htt txq state   Michal Kazior
    • ath10k: implement updating shared htt txq state   Dan Carpenter
      • ath10k: implement updating shared htt txq state   Dan Carpenter
• [patch] ath10k: add some sanity checks   Dan Carpenter
  • [patch] ath10k: add some sanity checks   Michal Kazior
    • [patch v2] ath10k: add some sanity checks   Dan Carpenter
      • [patch v2] ath10k: add some sanity checks   Valo, Kalle
      • [patch v2] ath10k: add some sanity checks   Valo, Kalle
• [PATCH] qcom: ipq4019: add wifi nodes to ipq4019 SoC device tree   tamizhchelvam at codeaurora.org
• [PATCH v2] qcom: ipq4019: add wifi nodes to ipq4019 SoC device tree   tamizhchelvam at codeaurora.org
  • [PATCH v2] qcom: ipq4019: add wifi nodes to ipq4019 SoC device tree   Stephen Boyd
    • [PATCH v2] qcom: ipq4019: add wifi nodes to ipq4019 SoC device tree   Tamizh chelvam
• [PATCH] ath10k: add dynamic tx mode switch config support for qca4019   c_traja at qti.qualcomm.com
  • [PATCH] ath10k: add dynamic tx mode switch config support for qca4019   Valo, Kalle
• [PATCH] ath10k: Document alloc_frag_desc_for_data_pkt config option.   Valo, Kalle
• [PATCH v2 0/5] ath10k: fix recent checkpatch warnings   Kalle Valo
  • [PATCH v2 1/5] ath10k: fix checkpatch warnings related to spaces   Kalle Valo
    • [PATCH v2 1/5] ath10k: fix checkpatch warnings related to spaces   Joe Perches
  • [PATCH v2 2/5] ath10k: prefer kernel type 'u64' over 'u_int64_t'   Kalle Valo
  • [PATCH v2 3/5] ath10k: prefer ether_addr_equal() or ether_addr_equal_unaligned() over memcmp()   Kalle Valo
  • [PATCH v2 4/5] ath10k: prefer ether_addr_copy() over memcpy()   Kalle Valo
  • [PATCH v2 5/5] ath10k: fix parenthesis alignment   Kalle Valo
  • [PATCH v2 0/5] ath10k: fix recent checkpatch warnings   Valo, Kalle
• QCA998X not working at all   Ben Greear
  • QCA998X not working at all   Alexis Green
    • QCA998X not working at all   Sebastian Gottschall
  • QCA998X not working at all   Sebastian Gottschall
• [PATCH v3 1/2] ath10k: Add support for ath10k_sta_statistics support   Valo, Kalle
• [PATCH 0/4] Add support for QCA9984   Vasanthakumar Thiagarajan
  • [PATCH 1/4] ath10k: Move rx_location_info out of struct rx_pkt_end   Vasanthakumar Thiagarajan
  • [PATCH 2/4] ath10k: Clean up growing hw checks during safe and full reset   Vasanthakumar Thiagarajan
  • [PATCH 3/4] ath10k: Define rx_ppdu_end for QCA9984   Vasanthakumar Thiagarajan
  • [PATCH 4/4] ath10k: Enable support for QCA9984   Vasanthakumar Thiagarajan
• [PATCH v2 0/8] ath10k: refactor firmware components   Kalle Valo
  • [PATCH v2 1/8] ath10k: remove deprecated firmware API 1 support   Kalle Valo
  • [PATCH v2 2/8] ath10k: refactor firmware images to struct ath10k_fw_components   Kalle Valo
  • [PATCH v2 3/8] ath10k: move fw_version inside struct ath10k_fw_file   Kalle Valo
  • [PATCH v2 4/8] ath10k: move fw_features to struct ath10k_fw_file   Kalle Valo
  • [PATCH v2 5/8] ath10k: move wmi_op_version to struct ath10k_fw_file   Kalle Valo
  • [PATCH v2 6/8] ath10k: move htt_op_version to struct ath10k_fw_file   Kalle Valo
  • [PATCH v2 7/8] ath10k: switch testmode to use ath10k_core_fetch_firmware_api_n()   Kalle Valo
  • [PATCH v2 8/8] ath10k: remove enum ath10k_swap_code_seg_bin_type   Kalle Valo
  • [PATCH v2 0/8] ath10k: refactor firmware components   Valo, Kalle
• [PATCH v2] ath10k: remove VHT capabilities from 2.4GHz   Kalle Valo
  • [PATCH v2] ath10k: remove VHT capabilities from 2.4GHz   Ben Greear
    • [PATCH v2] ath10k: remove VHT capabilities from 2.4GHz   Sebastian Gottschall
      • [PATCH v2] ath10k: remove VHT capabilities from 2.4GHz   Michael Ney
    • [PATCH v2] ath10k: remove VHT capabilities from 2.4GHz   Johannes Berg
      • [PATCH v2] ath10k: remove VHT capabilities from 2.4GHz   Valo, Kalle
      • [PATCH v2] ath10k: remove VHT capabilities from 2.4GHz   Krishna Chaitanya
      • [PATCH v2] ath10k: remove VHT capabilities from 2.4GHz   Ben Greear
      • [PATCH v2] ath10k: remove VHT capabilities from 2.4GHz   Krishna Chaitanya
      • [PATCH v2] ath10k: remove VHT capabilities from 2.4GHz   Jouni Malinen
      • [PATCH v2] ath10k: remove VHT capabilities from 2.4GHz   Krishna Chaitanya
      • [PATCH v2] ath10k: remove VHT capabilities from 2.4GHz   Johannes Berg
• [PATCH 1/4] ath10k: add pdev bss channel info wmi definitions   Rajkumar Manoharan
  • [PATCH 2/4] ath10k: implement wmi_pdev_bss_chan_info_request   Rajkumar Manoharan
  • [PATCH 3/4] ath10k: handle pdev_chan_info wmi event   Rajkumar Manoharan
  • [PATCH 4/4] ath10k: update bss channel survey information   Rajkumar Manoharan
    • [PATCH 4/4] ath10k: update bss channel survey information   Valo, Kalle
• [PATCH] ath10k: fix a typo in ath10k_start()   Mohammed Shafi Shajakhan
  • [PATCH] ath10k: fix a typo in ath10k_start()   Valo, Kalle
• low TCP throughput with 80MHz channel width   Iñaki Pascual
  • low TCP throughput with 80MHz channel width   Ben Greear
  • low TCP throughput with 80MHz channel width   Iñaki Pascual
    • low TCP throughput with 80MHz channel width   Ben Greear
    • low TCP throughput with 80MHz channel width   Iñaki Pascual
      • low TCP throughput with 80MHz channel width   Ben Greear
      • low TCP throughput with 80MHz channel width   Iñaki Pascual
      • low TCP throughput with 80MHz channel width   Ben Greear
      • low TCP throughput with 80MHz channel width [SOLVED]   Iñaki Pascual
    • low TCP throughput with 80MHz channel width   Michal Kazior
• qca6174 hw3.2 / Killer 1535 interface not coming up, reporting "failed to enable dynamic BW: -11"   Leonhardt Wille
  • qca6174 hw3.2 / Killer 1535 interface not coming up, reporting "failed to enable dynamic BW: -11"   Michal Kazior
• [OpenWrt-Devel] How to initialize multiple phy radios   Christian Lamparter
  • [OpenWrt-Devel] How to initialize multiple phy radios   Valo, Kalle
    • [OpenWrt-Devel] How to initialize multiple phy radios   David Hutchison
      • [OpenWrt-Devel] How to initialize multiple phy radios   Christian Lamparter
      • [OpenWrt-Devel] How to initialize multiple phy radios   David Hutchison
      • [OpenWrt-Devel] How to initialize multiple phy radios   Valo, Kalle
      • [OpenWrt-Devel] How to initialize multiple phy radios   Christian Lamparter
• Issues with latest kernel versions and Monitor mode   Amato Carbonara
  • Issues with latest kernel versions and Monitor mode   Michal Kazior
• [PATCH] ath10k: add max_tx_power for QCA6174 WLAN.RM.2.0 firmware   Kalle Valo
  • [PATCH] ath10k: add max_tx_power for QCA6174 WLAN.RM.2.0 firmware   Valo, Kalle
• QCA99XX with MU-MIMO and beamforming?   Ben Greear
  • QCA99XX with MU-MIMO and beamforming?   Michal Kazior
    • QCA99XX with MU-MIMO and beamforming?   Valo, Kalle
    • QCA99XX with MU-MIMO and beamforming?   Ben Greear
      • QCA99XX with MU-MIMO and beamforming?   Michal Kazior
• QCA6174 firmware crash   Michael Ney
  • QCA6174 firmware crash   Michal Kazior
    • QCA6174 firmware crash   Michael Ney
      • QCA6174 firmware crash   Michal Kazior
      • QCA6174 firmware crash   Michael Ney
• [PATCH] ath10k: release pre_cal_file while unloading driver   Rajkumar Manoharan
  • [PATCH] ath10k: release pre_cal_file while unloading driver   Valo, Kalle
• IBSS mode with DFS function   horse
  • IBSS mode with DFS function   Michal Kazior
    • IBSS mode with DFS function   horse
• enable 802.11h and 802.11d in IBSS mode   Jose Núñez-Martínez (CTTC)
  • enable 802.11h and 802.11d in IBSS mode   Peter Oh
    • enable 802.11h and 802.11d in IBSS mode   Jose Núñez-Martínez (CTTC)
      • enable 802.11h and 802.11d in IBSS mode   Michal Kazior
• [PATCH] ath10k: Move spectral related structures under ath10k debugfs   Mohammed Shafi Shajakhan
• [PATCH] ath10k: fix kernel panic, move arvifs list head init before htt init   akolli at qti.qualcomm.com
• QCA99XX, IBSS, and no transmitted frames?   Ben Greear
• Missing QCA6174 card in board-2.bin   gloudon.jamie at gmail.com
  • Missing QCA6174 card in board-2.bin   Michal Kazior
    • Missing QCA6174 card in board-2.bin   gloudon.jamie at gmail.com
      • Missing QCA6174 card in board-2.bin   Michal Kazior
      • Missing QCA6174 card in board-2.bin   Hsu, Ryan
• [PATCH v2 1/4] ath10k: add pdev bss channel info wmi definitions   Rajkumar Manoharan
  • [PATCH v2 2/4] ath10k: implement wmi_pdev_bss_chan_info_request   Rajkumar Manoharan
  • [PATCH v2 3/4] ath10k: handle pdev_chan_info wmi event   Rajkumar Manoharan
  • [PATCH v2 4/4] ath10k: update bss channel survey information   Rajkumar Manoharan
• [PATCH v2] ath10k: release pre_cal_file while unloading driver   Rajkumar Manoharan
• ath10k IBSS and A-MSDU throuput   Harms, Hannes
  • ath10k IBSS and A-MSDU throuput   Ben Greear
    • ath10k IBSS and A-MSDU throuput   Hannes Harms
      • ath10k IBSS and A-MSDU throuput   Ben Greear
• high RTT in 40 MHz channel width   Iñaki Pascual
  • high RTT in 40 MHz channel width   Jose Núñez-Martínez (CTTC)
    • high RTT in 40 MHz channel width   Ben Greear
• [PATCH 0/4] linux-firmware: ath10k: add QCA9377 and update QCA6174 images   Kalle Valo
  • [PATCH 1/4] ath10k: QCA6174 hw2.1: update firmware-5.bin to SW_RM.1.1.1-00157-QCARMSWPZ-1   Kalle Valo
  • [PATCH 2/4] ath10k: QCA6174 hw2.1: add board-2.bin   Kalle Valo
  • [PATCH 3/4] ath10k: QCA6174 hw3.0: add board-2.bin   Kalle Valo
  • [PATCH 4/4] ath10k: QCA9377 hw1.0: add firmware and board files   Kalle Valo
• fq_codel_drop vs a udp flood   Dave Taht
  • [Make-wifi-fast] fq_codel_drop vs a udp flood   Jonathan Morton
  • fq_codel_drop vs a udp flood   Ben Greear
    • fq_codel_drop vs a udp flood   Dave Taht

Last message date: Sat Apr 30 22:23:39 PDT 2016
Archived on: Sat Apr 30 22:24:03 PDT 2016

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...