ath10k IBSS and A-MSDU throuput

[Ben Greear]

On 04/29/2016 08:51 AM, Harms, Hannes wrote:
> Hi everyone,
>
> I have set up two Compex WLE900 in ad-hoc mode, 80MHz channel width, channel 100.
> I am using kernel 3.17 from Gateworks for imx6 and
> my own compat_wirless (4.4.2) with all patches from Candela for ath10k and all patches for mac80211 from the
> Candela 4.4 kernel tree.
>
> The upload for TCP is about 200 MBit/s and the download is about 250 MBit/s, tested with iperf3.
>
> Now I am trying to enable A-MSDU as described in the firmware release 10.1.467-ct-15 from Candela,
> but I can not measure anydifference  in throughput.
>
> Could anyone confirm that A-MSDU is really working with IBSS?

You can sniff it and see if you can sniff amsdu frames on air?

I only tested it a bit when developing that feature for another user
(who eventually decided to not use it anyway since it required linux
kernel hacks to make it work), so possibly there was a regression...

Thanks,
Ben

-- 
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com