January 2018 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Mon Jan 1 06:41:21 PST 2018
Ending: Mon Jan 29 08:30:20 PST 2018
Messages: 144

• [PATCH 01/33] clk_ops: change round_rate() to return unsigned long   kbuild test robot
• [PATCH 01/33] clk_ops: change round_rate() to return unsigned long   kbuild test robot
• [PATCH 01/33] clk_ops: change round_rate() to return unsigned long   kbuild test robot
• [PATCH v2 01/34] clk_ops: change round_rate() to return unsigned long   Bryan O'Donoghue
• [PATCH v2 08/34] clk: bcm2835: change bcm2835_pll_rate_from_divisors to return unsigned long   Bryan O'Donoghue
• [PATCH v3 01/34] clk_ops: change round_rate() to return unsigned long   Bryan O'Donoghue
• [PATCH v3 08/34] clk: bcm2835: change bcm2835_pll_rate_from_divisors to return unsigned long   Bryan O'Donoghue
• [PATCH v3 09/34] clk: bcm2835: change clk_get_rate() helper return type   Bryan O'Donoghue
• [PATCH 0/4] gpio: driver for the RPi3 GPIO expander   Baruch Siach
• [PATCH 1/4] ARM: bcm2835: sync firmware properties with downstream   Baruch Siach
• [PATCH 2/4] dt-bindings: gpio: add raspberry pi GPIO expander binding   Baruch Siach
• [PATCH 3/4] bcm2835-gpio-exp: Driver for GPIO expander via mailbox service   Baruch Siach
• [PATCH 4/4] ARM: dts: bcm2837-rpi-3-b: add GPIO expander   Baruch Siach
• Mailbox property: RPI_FIRMWARE_GET_CUSTOMER_OTP   Phil Elwell
• Mailbox property: RPI_FIRMWARE_GET_CUSTOMER_OTP   Stefan Wahren
• Mailbox property: RPI_FIRMWARE_GET_CUSTOMER_OTP   Phil Elwell
• [PATCH 0/4] gpio: driver for the RPi3 GPIO expander   Stefan Wahren
• [PATCH 2/4] dt-bindings: gpio: add raspberry pi GPIO expander binding   Stefan Wahren
• [PATCH 3/4] bcm2835-gpio-exp: Driver for GPIO expander via mailbox service   Stefan Wahren
• [PATCH 01/33] clk_ops: change round_rate() to return unsigned long   Stephen Boyd
• [PATCH 4/4] ARM: dts: bcm2837-rpi-3-b: add GPIO expander   Stefan Wahren
• [PATCH 01/33] clk_ops: change round_rate() to return unsigned long   Bryan O'Donoghue
• [PATCH v3 09/34] clk: bcm2835: change clk_get_rate() helper return type   Eric Anholt
• [PATCH 01/33] clk_ops: change round_rate() to return unsigned long   Stephen Boyd
• [PATCH v3 01/34] clk_ops: change round_rate() to return unsigned long   Mauro Carvalho Chehab
• [PATCH 3/4] bcm2835-gpio-exp: Driver for GPIO expander via mailbox service   Linus Walleij
• [PATCH 0/3] irqchip: irq-bcm2836: add support for DT interrupt polarity   Stefan Wahren
• [PATCH 0/3] irqchip: irq-bcm2836: add support for DT interrupt polarity   Marc Zyngier
• [PATCH 4/4] ARM: dts: bcm2837-rpi-3-b: add GPIO expander   Stefan Wahren
• [PATCH 4/4] ARM: dts: bcm2837-rpi-3-b: add GPIO expander   Phil Elwell
• [PATCH] drm/vc4: Move IRQ enable to PM path   Eric Anholt
• [PATCH 4/4] ARM: dts: bcm2837-rpi-3-b: add GPIO expander   Peter Robinson
• [PATCH 2/4] dt-bindings: gpio: add raspberry pi GPIO expander binding   Baruch Siach
• [PATCH 3/4] bcm2835-gpio-exp: Driver for GPIO expander via mailbox service   Baruch Siach
• [PATCH 3/4] bcm2835-gpio-exp: Driver for GPIO expander via mailbox service   Stefan Wahren
• [PATCH 3/4] bcm2835-gpio-exp: Driver for GPIO expander via mailbox service   Baruch Siach
• rpi3 regression in v4.15: no more USB after 'Fix DTC warnings about missing phy-cells' patch   Hans Verkuil
• rpi3 regression in v4.15: no more USB after 'Fix DTC warnings about missing phy-cells' patch   Stefan Wahren
• rpi3 regression in v4.15: no more USB after 'Fix DTC warnings about missing phy-cells' patch   Hans Verkuil
• [PATCH 3/4] bcm2835-gpio-exp: Driver for GPIO expander via mailbox service   Linus Walleij
• [PATCH v2 0/4] gpio: driver for the RPi3 GPIO expander   Baruch Siach
• [PATCH v2 1/4] ARM: bcm2835: sync firmware properties with downstream   Baruch Siach
• [PATCH v2 2/4] dt-bindings: gpio: add raspberry pi GPIO expander binding   Baruch Siach
• [PATCH v2 3/4] gpio: raspberrypi-exp: Driver for RPi3 GPIO expander via mailbox service   Baruch Siach
• [PATCH v2 4/4] ARM: dts: bcm2837-rpi-3-b: add GPIO expander   Baruch Siach
• [PATCH] phy: work around 'phys' references to usb-nop-xceiv devices   Arnd Bergmann
• [PATCH v2 00/16] extend PWM framework to support PWM modes   Claudiu Beznea
• [PATCH v2 01/16] drivers: pwm: core: use a single of xlate function   Claudiu Beznea
• [PATCH v2 02/16] pwm: pxa: update documentation regarding pwm-cells   Claudiu Beznea
• [PATCH v2 03/16] pwm: cros-ec: update documentation regarding pwm-cells   Claudiu Beznea
• [PATCH v2 04/16] pwm: clps711x: update documentation regarding pwm-cells   Claudiu Beznea
• [PATCH v2 05/16] ARM: dts: clps711x: update pwm-cells   Claudiu Beznea
• [PATCH v2 06/16] ARM: dts: pxa: update pwm-cells   Claudiu Beznea
• [PATCH v2 07/16] arm64: dts: rockchip: update pwm-cells   Claudiu Beznea
• [PATCH v2 08/16] drivers: pwm: core: extend PWM framework with PWM modes   Claudiu Beznea
• [PATCH v2 09/16] drivers: pwm: core: add PWM mode to pwm_config()   Claudiu Beznea
• [PATCH v2 10/16] pwm: Add PWM modes   Claudiu Beznea
• [PATCH v2 11/16] pwm: add documentation for PWM modes   Claudiu Beznea
• [PATCH v2 12/16] pwm: atmel: add pwm capabilities   Claudiu Beznea
• [PATCH v2 13/16] drivers: pwm: core: add push-pull mode support   Claudiu Beznea
• [PATCH v2 14/16] pwm: add push-pull mode   Claudiu Beznea
• [PATCH v2 15/16] pwm: add documentation for pwm push-pull mode   Claudiu Beznea
• [PATCH v2 16/16] pwm: atmel: add push-pull mode support   Claudiu Beznea
• [PATCH] phy: work around 'phys' references to usb-nop-xceiv devices   Stefan Wahren
• [PATCH v2 03/16] pwm: cros-ec: update documentation regarding pwm-cells   Brian Norris
• [PATCH v2 01/16] drivers: pwm: core: use a single of xlate function   Brian Norris
• [PATCH] phy: work around 'phys' references to usb-nop-xceiv devices   Rob Herring
• [PATCH v2 1/4] ARM: bcm2835: sync firmware properties with downstream   Stefan Wahren
• bcm2835: device tree regression in 4.15.0-rc7   kernel at martin.sperl.org
• [PATCH v2 2/4] dt-bindings: gpio: add raspberry pi GPIO expander binding   Stefan Wahren
• [PATCH v2 3/4] gpio: raspberrypi-exp: Driver for RPi3 GPIO expander via mailbox service   Stefan Wahren
• [PATCH v2 4/4] ARM: dts: bcm2837-rpi-3-b: add GPIO expander   Stefan Wahren
• bcm2835: device tree regression in 4.15.0-rc7   Stefan Wahren
• [PATCH v2 3/4] gpio: raspberrypi-exp: Driver for RPi3 GPIO expander via mailbox service   Peter Robinson
• [PATCH v2 3/4] gpio: raspberrypi-exp: Driver for RPi3 GPIO expander via mailbox service   Baruch Siach
• [PATCH v2 3/4] gpio: raspberrypi-exp: Driver for RPi3 GPIO expander via mailbox service   Stefan Wahren
• [PATCH v2 01/16] drivers: pwm: core: use a single of xlate function   Claudiu Beznea
• [PATCH v2 03/16] pwm: cros-ec: update documentation regarding pwm-cells   Claudiu Beznea
• [PATCH v2 01/16] drivers: pwm: core: use a single of xlate function   Claudiu Beznea
• [PATCH v2 01/16] drivers: pwm: core: use a single of xlate function   Andy Shevchenko
• [PATCH v2 01/16] drivers: pwm: core: use a single of xlate function   Claudiu Beznea
• [PATCH v2 01/16] drivers: pwm: core: use a single of xlate function   Neil Armstrong
• [PATCH v2 01/16] drivers: pwm: core: use a single of xlate function   Claudiu Beznea
• [PATCH v2 1/4] ARM: bcm2835: sync firmware properties with downstream   Linus Walleij
• [PATCH v2 1/4] ARM: bcm2835: sync firmware properties with downstream   Baruch Siach
• [PATCH v2 1/4] ARM: bcm2835: sync firmware properties with downstream   Stefan Wahren
• [PATCH v3 0/4] gpio: driver for the RPi3 GPIO expander   Baruch Siach
• [PATCH v3 1/4] ARM: bcm2835: sync firmware properties with downstream   Baruch Siach
• [PATCH v3 2/4] dt-bindings: gpio: add raspberry pi GPIO expander binding   Baruch Siach
• [PATCH v3 3/4] gpio: raspberrypi-exp: Driver for RPi3 GPIO expander via mailbox service   Baruch Siach
• [PATCH v3 4/4] ARM: dts: bcm2837-rpi-3-b: add GPIO expander   Baruch Siach
• mmc1 timeout issue with rpi3   Stefan Wahren
• mmc1 timeout issue with rpi3   Sergey Suloev
• [PATCH v2 03/16] pwm: cros-ec: update documentation regarding pwm-cells   Claudiu Beznea
• [PATCH v3 4/4] ARM: dts: bcm2837-rpi-3-b: add GPIO expander   Stefan Wahren
• [PATCH v3 4/4] ARM: dts: bcm2837-rpi-3-b: add GPIO expander   Linus Walleij
• [PATCH -next] hwrng: bcm2835 - Remove redundant dev_err call in bcm2835_rng_probe()   Wei Yongjun
• [PATCH] ASoC: bcm2835: fix hw_params error when device is in prepared state   Matthias Reichl
• mmc1 timeout issue with rpi3   Stefan Wahren
• mmc1 timeout issue with rpi3   Phil Elwell
• DT binding for staging vchiq   Stefan Wahren
• mmc1 timeout issue with rpi3   Sergey Suloev
• mmc1 timeout issue with rpi3   Sergey Suloev
• mmc1 timeout issue with rpi3   Stefan Wahren
• [PATCH V3 1/2] dt-bindings: bcm283x: Fix register ranges of bcm2835-i2s   Eric Anholt
• DT binding for staging vchiq   Sergey Suloev
• mmc1 timeout issue with rpi3   Phil Elwell
• [PATCH -next] hwrng: bcm2835 - Remove redundant dev_err call in bcm2835_rng_probe()   Eric Anholt
• mmc1 timeout issue with rpi3   Sergey Suloev
• [PATCH v2 03/16] pwm: cros-ec: update documentation regarding pwm-cells   Brian Norris
• [PATCH v2 01/16] drivers: pwm: core: use a single of xlate function   Brian Norris
• [PATCH v4] ARM: dts: bcm283x: Fix pin function of JTAG pins   henryzhang62 at gmail.com
• mmc1 timeout issue with rpi3   Stefan Wahren
• [PATCH v2 01/16] drivers: pwm: core: use a single of xlate function   Claudiu Beznea
• [PATCH v2 03/16] pwm: cros-ec: update documentation regarding pwm-cells   Claudiu Beznea
• Applied "ASoC: bcm2835: fix hw_params error when device is in prepared state" to the asoc tree   Mark Brown
• mmc1 timeout issue with rpi3   Sergey Suloev
• mmc1 timeout issue with rpi3   Stefan Wahren
• mmc1 timeout issue with rpi3   Sergey Suloev
• mmc1 timeout issue with rpi3   Stefan Wahren
• mmc1 timeout issue with rpi3   Phil Elwell
• mmc1 timeout issue with rpi3   Sergey Suloev
• mmc1 timeout issue with rpi3   Sergey Suloev
• [PATCH v2 1/4] ARM: bcm2835: sync firmware properties with downstream   Eric Anholt
• [PATCH] phy: work around 'phys' references to usb-nop-xceiv devices   Stefan Wahren
• Patches for Nanopi A64 display engine   Sergey Suloev
• [PATCH] phy: work around 'phys' references to usb-nop-xceiv devices   Arnd Bergmann
• [PATCH v3 3/4] gpio: raspberrypi-exp: Driver for RPi3 GPIO expander via mailbox service   Stefan Wahren
• [PATCH v3 4/4] ARM: dts: bcm2837-rpi-3-b: add GPIO expander   Stefan Wahren
• [PATCH v2 02/16] pwm: pxa: update documentation regarding pwm-cells   Rob Herring
• [PATCH v2 10/16] pwm: Add PWM modes   Rob Herring
• [PATCH v2 11/16] pwm: add documentation for PWM modes   Rob Herring
• [PATCH v2 15/16] pwm: add documentation for pwm push-pull mode   Rob Herring
• [PATCH v2 02/16] pwm: pxa: update documentation regarding pwm-cells   Claudiu Beznea
• [PATCH v2 10/16] pwm: Add PWM modes   Claudiu Beznea
• [PATCH v2 11/16] pwm: add documentation for PWM modes   Claudiu Beznea
• [PATCH v2 10/16] pwm: Add PWM modes   Rob Herring
• [PATCH -next] hwrng: bcm2835 - Remove redundant dev_err call in bcm2835_rng_probe()   Florian Fainelli
• [PATCH v2 10/16] pwm: Add PWM modes   Claudiu Beznea
• [PATCH v2 10/16] pwm: Add PWM modes   Rob Herring
• [PATCH v2 10/16] pwm: Add PWM modes   Claudiu Beznea
• [PATCH -next] hwrng: bcm2835 - Remove redundant dev_err call in bcm2835_rng_probe()   Herbert Xu
• [PATCH v3 2/4] dt-bindings: gpio: add raspberry pi GPIO expander binding   Rob Herring
• [PATCH v3 2/4] dt-bindings: gpio: add raspberry pi GPIO expander binding   Baruch Siach

Last message date: Mon Jan 29 08:30:20 PST 2018
Archived on: Tue Jan 30 11:38:41 PST 2018

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...