[PATCH v2 4/4] ARM: dts: bcm2837-rpi-3-b: add GPIO expander

[Baruch Siach]

Add a description of the RPi3 GPIO expander that the VC4 firmware controls.

Signed-off-by: Baruch Siach <baruch at tkos.co.il>
---
v2:
  * Move GPIO expander node out of the soc container
  * Rename compatible string
  * Add gpio-line-names property
---
 arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
index b44b3b5af00d..24555e8a43ec 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -23,6 +23,16 @@
 			gpios = <&gpio 47 0>;
 		};
 	};
+
+	expgpio: gpio-expander {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		firmware = <&firmware>;
+		gpio-line-names = "BT_ON", "WL_ON", "STATUS_LED", "LAN_RUN",
+			"HPD_N", "CAM_GPIO0", "CAM_GPIO1", "PWR_LOW_N";
+		status = "okay";
+	};
 };
 
 /* uart0 communicates with the BT module */
-- 
2.15.1