June 2023 Archives by author
Starting: Thu Jun 1 01:07:22 PDT 2023
Ending: Fri Jun 30 11:21:49 PDT 2023
Messages: 445
- [PATCH 18/26] net: stmmac: add new switch to struct plat_stmmacenet_data
Jose Abreu
- [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes
Sean Anderson
- [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes
Sean Anderson
- [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes
Sean Anderson
- [PATCH 03/26] phy: qcom: add the SGMII SerDes PHY driver
Bjorn Andersson
- [PATCH v3 02/11] phy: qcom-qmp-ufs: populate offsets configuration
Bjorn Andersson
- (subset) [PATCH v5 0/4] Samsung Galaxy Express SGH-I437 Support
Bjorn Andersson
- [PATCH 24/26] arm64: dts: qcom: sa8775p-ride: enable the SerDes PHY
Bjorn Andersson
- [PATCH v3 1/3] phy: qcom-snps-femto-v2: properly enable ref clock
Bjorn Andersson
- [PATCH v3 2/3] phy: qcom-snps-femto-v2: add system sleep PM ops
Bjorn Andersson
- [PATCH v3 2/3] phy: qcom-snps-femto-v2: add system sleep PM ops
Bjorn Andersson
- [PATCH v3 2/3] phy: qcom-snps-femto-v2: add system sleep PM ops
Bjorn Andersson
- [PATCH] phy: qcom: qmp-combo: fix Display Port PHY configuration for SM8550
Neil Armstrong
- (subset) [PATCH v5 00/17] drm/meson: add support for MIPI DSI Display
Neil Armstrong
- [PATCH] phy: qcom: qmp-combo: fix Display Port PHY configuration for SM8550
Neil Armstrong
- [PATCH 4/9] clk: qcom: ipq5332: Fix USB related clock defines
Dmitry Baryshkov
- [PATCH 5/9] phy: qcom-m31: Introduce qcom,m31 USB phy
Dmitry Baryshkov
- [PATCH 7/9] arm64: dts: qcom: ipq5332: Add USB related nodes
Dmitry Baryshkov
- [PATCH 3/9] phy: qcom-m31: Introduce qcom,m31 USB phy driver
Dmitry Baryshkov
- [RESEND PATCH 0/7] phy: qcom: qmp-combo: rework register access
Dmitry Baryshkov
- [RESEND PATCH 1/7] phy: qcom: qmp-combo: correct bias0_en programming
Dmitry Baryshkov
- [RESEND PATCH 2/7] phy: qcom: qmp-combo: reuse register layouts for more registers
Dmitry Baryshkov
- [RESEND PATCH 3/7] phy: qcom: qmp-combo: reuse register layouts for even more registers
Dmitry Baryshkov
- [RESEND PATCH 4/7] phy: qcom: qmp-combo: reuse register layouts for some more registers
Dmitry Baryshkov
- [RESEND PATCH 5/7] phy: qcom: qmp-combo: drop similar functions
Dmitry Baryshkov
- [RESEND PATCH 6/7] phy: qcom: qmp-combo: drop qmp_v6_dp_aux_init()
Dmitry Baryshkov
- [RESEND PATCH 7/7] phy: qcom: qmp-combo: extract common function to setup clocks
Dmitry Baryshkov
- [PATCH v6 4/8] phy: Add HDMI configuration options
Dmitry Baryshkov
- [PATCH v8 3/3] phy: mediatek: add support for phy-mtk-hdmi-mt8195
Dmitry Baryshkov
- [PATCH v2 00/15] drm/msm/hdmi & phy: use generic PHY framework
Dmitry Baryshkov
- [PATCH v2 01/15] phy: Add HDMI configuration options
Dmitry Baryshkov
- [PATCH v2 02/15] phy: qualcomm: add QMP HDMI PHY driver
Dmitry Baryshkov
- [PATCH v2 03/15] phy: qcom: apq8064-sata: extract UNI PLL register defines
Dmitry Baryshkov
- [PATCH v2 04/15] phy: qcom-uniphy: add more registers from display PHYs
Dmitry Baryshkov
- [PATCH v2 05/15] phy: qualcomm: add legacy HDMI PHY driver
Dmitry Baryshkov
- [PATCH v2 06/15] phy: qualcomm: add MSM8974 HDMI PHY support
Dmitry Baryshkov
- [PATCH v2 07/15] phy: qualcomm: add MSM8x60 HDMI PHY support
Dmitry Baryshkov
- [PATCH v2 08/15] drm/msm/hdmi: move the alt_iface clock to the hpd list
Dmitry Baryshkov
- [PATCH v2 09/15] drm/msm/hdmi: simplify extp clock handling
Dmitry Baryshkov
- [PATCH v2 10/15] drm/msm/hdmi: correct indentation of HDMI bridge functions
Dmitry Baryshkov
- [PATCH v2 11/15] drm/msm/hdmi: switch to atomic_pre_enable/post_disable
Dmitry Baryshkov
- [PATCH v2 12/15] drm/msm/hdmi: set infoframes on all pre_enable calls
Dmitry Baryshkov
- [PATCH v2 13/15] drm/msm/hdmi: pair msm_hdmi_phy_powerup with msm_hdmi_phy_powerdown
Dmitry Baryshkov
- [PATCH v2 14/15] drm/msm/hdmi: switch to generic PHY subsystem
Dmitry Baryshkov
- [PATCH v2 15/15] drm/msm/hdmi: drop old HDMI PHY code
Dmitry Baryshkov
- (subset) [PATCH 3/7] dt-bindings: rtc: restrict node name suffixes
Alexandre Belloni
- [PATCH] media: tc358746: select CONFIG_GENERIC_PHY
Arnd Bergmann
- [PATCH 0/2] phy: usb: brcmstb bug fix and improvements
Justin Chen
- [PATCH 1/2] phy: usb: Turn off phy when port is in suspend
Justin Chen
- [PATCH 2/2] phy: usb: suppress OC condition for 7439b2
Justin Chen
- [PATCH v6 5/7] dt-bindings: usb: Add StarFive JH7110 USB controller
Minda Chen
- [PATCH v7 0/7] Add JH7110 USB PHY driver support
Minda Chen
- [PATCH v7 1/5] dt-bindings: phy: Add StarFive JH7110 USB PHY
Minda Chen
- [PATCH v7 2/5] dt-bindings: phy: Add StarFive JH7110 PCIe PHY
Minda Chen
- [PATCH v7 3/5] phy: starfive: Add JH7110 USB 2.0 PHY driver
Minda Chen
- [PATCH v7 4/5] phy: starfive: Add JH7110 PCIE 2.0 PHY driver
Minda Chen
- [PATCH v7 5/5] riscv: dts: starfive: Add PCIe PHY dts configuration for JH7110
Minda Chen
- [PATCH v7 4/5] phy: starfive: Add JH7110 PCIE 2.0 PHY driver
Minda Chen
- [PATCH v7 3/5] phy: starfive: Add JH7110 USB 2.0 PHY driver
Minda Chen
- [PATCH v8 0/5] Add JH7110 USB PHY driver support
Minda Chen
- [PATCH v8 1/5] dt-bindings: phy: Add StarFive JH7110 USB PHY
Minda Chen
- [PATCH v8 2/5] dt-bindings: phy: Add StarFive JH7110 PCIe PHY
Minda Chen
- [PATCH v8 3/5] phy: starfive: Add JH7110 USB 2.0 PHY driver
Minda Chen
- [PATCH v8 4/5] phy: starfive: Add JH7110 PCIE 2.0 PHY driver
Minda Chen
- [PATCH v8 5/5] riscv: dts: starfive: Add PCIe PHY dts configuration for JH7110
Minda Chen
- [PATCH v2 3/3] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 2.0/3.0 PHY
Conor Dooley
- [PATCH 1/1] dt-bindings: phy: mixel,mipi-dsi-phy: Remove assigned-clock* properties
Conor Dooley
- [PATCH v6 7/7] riscv: dts: starfive: Add USB dts configuration for JH7110
Conor Dooley
- [PATCH 1/1] dt-bindings: phy: mixel, mipi-dsi-phy: Remove assigned-clock* properties
Conor Dooley
- [PATCH v7 4/5] phy: starfive: Add JH7110 PCIE 2.0 PHY driver
Conor Dooley
- [PATCH v6 4/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 2.0 PHY
Conor Dooley
- [PATCH] phy: qcom: qmp-combo: fix Display Port PHY configuration for SM8550
Konrad Dybcio
- [PATCH v2 1/2] phy: qcom-snps-femto-v2: properly enable ref clock
Konrad Dybcio
- [PATCH 3/9] phy: qcom-m31: Introduce qcom,m31 USB phy driver
Konrad Dybcio
- [PATCH 7/9] arm64: dts: qcom: ipq5332: Add USB related nodes
Konrad Dybcio
- [PATCH v2 1/2] phy: qcom-snps-femto-v2: properly enable ref clock
Konrad Dybcio
- [PATCH 22/26] arm64: dts: qcom: sa8775p-ride: add the SGMII PHY node
Konrad Dybcio
- [PATCH 03/26] phy: qcom: add the SGMII SerDes PHY driver
Konrad Dybcio
- [PATCH 23/26] arm64: dts: qcom: sa8775p: add the first 1Gb ethernet interface
Konrad Dybcio
- [PATCH 24/26] arm64: dts: qcom: sa8775p-ride: enable the SerDes PHY
Konrad Dybcio
- [PATCH 25/26] arm64: dts: qcom: sa8775p-ride: add pin functions for ethernet0
Konrad Dybcio
- [PATCH 26/26] arm64: dts: qcom: sa8775p-ride: enable ethernet0
Konrad Dybcio
- [PATCH v2 19/23] arm64: dts: qcom: sa8775p: add the SGMII PHY node
Konrad Dybcio
- [PATCH v2 02/15] phy: qualcomm: add QMP HDMI PHY driver
Konrad Dybcio
- [PATCH 2/2] phy: usb: suppress OC condition for 7439b2
Florian Fainelli
- [PATCH] media: tc358746: select CONFIG_GENERIC_PHY
Marco Felsch
- [PATCH 00/26] arm64: qcom: sa8775p-ride: enable the first ethernet port
Bartosz Golaszewski
- [PATCH 01/26] phy: qualcomm: fix indentation in Makefile
Bartosz Golaszewski
- [PATCH 02/26] dt-bindings: phy: describe the Qualcomm SGMII PHY
Bartosz Golaszewski
- [PATCH 03/26] phy: qcom: add the SGMII SerDes PHY driver
Bartosz Golaszewski
- [PATCH 04/26] arm64: defconfig: enable the SerDes PHY for Qualcomm DWMAC
Bartosz Golaszewski
- [PATCH 05/26] net: stmmac: dwmac-qcom-ethqos: shrink clock code with devres
Bartosz Golaszewski
- [PATCH 06/26] net: stmmac: dwmac-qcom-ethqos: rename a label in probe()
Bartosz Golaszewski
- [PATCH 07/26] net: stmmac: dwmac-qcom-ethqos: tweak the order of local variables
Bartosz Golaszewski
- [PATCH 08/26] net: stmmac: dwmac-qcom-ethqos: use a helper variable for &pdev->dev
Bartosz Golaszewski
- [PATCH 09/26] net: stmmac: dwmac-qcom-ethqos: add missing include
Bartosz Golaszewski
- [PATCH 10/26] net: stmmac: dwmac-qcom-ethqos: add a newline between headers
Bartosz Golaszewski
- [PATCH 11/26] net: stmmac: dwmac-qcom-ethqos: remove stray space
Bartosz Golaszewski
- [PATCH 12/26] net: stmmac: dwmac-qcom-ethqos: add support for the optional serdes phy
Bartosz Golaszewski
- [PATCH 13/26] net: stmmac: dwmac-qcom-ethqos: make the rgmii clock optional
Bartosz Golaszewski
- [PATCH 14/26] net: stmmac: dwmac-qcom-ethqos: add optional phyaux clock
Bartosz Golaszewski
- [PATCH 15/26] net: stmmac: dwmac-qcom-ethqos: add support for the optional phy-supply
Bartosz Golaszewski
- [PATCH 16/26] net: stmmac: dwmac-qcom-ethqos: prepare the driver for more PHY modes
Bartosz Golaszewski
- [PATCH 17/26] net: stmmac: dwmac-qcom-ethqos: add support for SGMII
Bartosz Golaszewski
- [PATCH 18/26] net: stmmac: add new switch to struct plat_stmmacenet_data
Bartosz Golaszewski
- [PATCH 19/26] dt-bindings: net: snps,dwmac: add compatible for sa8775p ethqos
Bartosz Golaszewski
- [PATCH 20/26] dt-bindings: net: qcom,ethqos: add description for sa8775p
Bartosz Golaszewski
- [PATCH 21/26] net: stmmac: dwmac-qcom-ethqos: add support for emac4 on sa8775p platforms
Bartosz Golaszewski
- [PATCH 22/26] arm64: dts: qcom: sa8775p-ride: add the SGMII PHY node
Bartosz Golaszewski
- [PATCH 23/26] arm64: dts: qcom: sa8775p: add the first 1Gb ethernet interface
Bartosz Golaszewski
- [PATCH 24/26] arm64: dts: qcom: sa8775p-ride: enable the SerDes PHY
Bartosz Golaszewski
- [PATCH 25/26] arm64: dts: qcom: sa8775p-ride: add pin functions for ethernet0
Bartosz Golaszewski
- [PATCH 26/26] arm64: dts: qcom: sa8775p-ride: enable ethernet0
Bartosz Golaszewski
- [PATCH 12/26] net: stmmac: dwmac-qcom-ethqos: add support for the optional serdes phy
Bartosz Golaszewski
- [PATCH 13/26] net: stmmac: dwmac-qcom-ethqos: make the rgmii clock optional
Bartosz Golaszewski
- [PATCH 15/26] net: stmmac: dwmac-qcom-ethqos: add support for the optional phy-supply
Bartosz Golaszewski
- [PATCH 03/26] phy: qcom: add the SGMII SerDes PHY driver
Bartosz Golaszewski
- [PATCH 20/26] dt-bindings: net: qcom,ethqos: add description for sa8775p
Bartosz Golaszewski
- [PATCH v2 00/23] arm64: qcom: sa8775p-ride: enable the first ethernet port
Bartosz Golaszewski
- [PATCH v2 01/23] phy: qualcomm: fix indentation in Makefile
Bartosz Golaszewski
- [PATCH v2 02/23] dt-bindings: phy: describe the Qualcomm SGMII PHY
Bartosz Golaszewski
- [PATCH v2 03/23] phy: qcom: add the SGMII SerDes PHY driver
Bartosz Golaszewski
- [PATCH v2 04/23] arm64: defconfig: enable the SerDes PHY for Qualcomm DWMAC
Bartosz Golaszewski
- [PATCH v2 05/23] net: stmmac: dwmac-qcom-ethqos: shrink clock code with devres
Bartosz Golaszewski
- [PATCH v2 06/23] net: stmmac: dwmac-qcom-ethqos: rename a label in probe()
Bartosz Golaszewski
- [PATCH v2 07/23] net: stmmac: dwmac-qcom-ethqos: tweak the order of local variables
Bartosz Golaszewski
- [PATCH v2 08/23] net: stmmac: dwmac-qcom-ethqos: use a helper variable for &pdev->dev
Bartosz Golaszewski
- [PATCH v2 09/23] net: stmmac: dwmac-qcom-ethqos: add missing include
Bartosz Golaszewski
- [PATCH v2 10/23] net: stmmac: dwmac-qcom-ethqos: add a newline between headers
Bartosz Golaszewski
- [PATCH v2 11/23] net: stmmac: dwmac-qcom-ethqos: remove stray space
Bartosz Golaszewski
- [PATCH v2 12/23] net: stmmac: dwmac-qcom-ethqos: add support for the optional serdes phy
Bartosz Golaszewski
- [PATCH v2 13/23] net: stmmac: dwmac-qcom-ethqos: add support for the phyaux clock
Bartosz Golaszewski
- [PATCH v2 14/23] net: stmmac: dwmac-qcom-ethqos: prepare the driver for more PHY modes
Bartosz Golaszewski
- [PATCH v2 15/23] net: stmmac: dwmac-qcom-ethqos: add support for SGMII
Bartosz Golaszewski
- [PATCH v2 16/23] net: stmmac: add new switch to struct plat_stmmacenet_data
Bartosz Golaszewski
- [PATCH v2 17/23] dt-bindings: net: qcom,ethqos: add description for sa8775p
Bartosz Golaszewski
- [PATCH v2 18/23] net: stmmac: dwmac-qcom-ethqos: add support for emac4 on sa8775p platforms
Bartosz Golaszewski
- [PATCH v2 19/23] arm64: dts: qcom: sa8775p: add the SGMII PHY node
Bartosz Golaszewski
- [PATCH v2 20/23] arm64: dts: qcom: sa8775p: add the first 1Gb ethernet interface
Bartosz Golaszewski
- [PATCH v2 21/23] arm64: dts: qcom: sa8775p-ride: enable the SerDes PHY
Bartosz Golaszewski
- [PATCH v2 22/23] arm64: dts: qcom: sa8775p-ride: add pin functions for ethernet0
Bartosz Golaszewski
- [PATCH v2 23/23] arm64: dts: qcom: sa8775p-ride: enable ethernet0
Bartosz Golaszewski
- [PATCH v2 00/23] arm64: qcom: sa8775p-ride: enable the first ethernet port
Bartosz Golaszewski
- [RESEND PATCH v2 0/3] phy: add the SerDes/SGMII driver for Qualcomm SoCs
Bartosz Golaszewski
- [RESEND PATCH v2 1/3] phy: qualcomm: fix indentation in Makefile
Bartosz Golaszewski
- [RESEND PATCH v2 2/3] dt-bindings: phy: describe the Qualcomm SGMII PHY
Bartosz Golaszewski
- [RESEND PATCH v2 3/3] phy: qcom: add the SGMII SerDes PHY driver
Bartosz Golaszewski
- [PATCH v3 0/4] Samsung Galaxy Express SGH-I437 Support
Rudraksha Gupta
- [PATCH v3 1/4] dt-bindings: arm: qcom: Add Samsung Galaxy Express
Rudraksha Gupta
- [PATCH v3 2/4] dt-bindings: phy: qcom,usb-hs-phy: Add compatible
Rudraksha Gupta
- [PATCH v3 3/4] ARM: dts: qcom: msm8960: Add USB node
Rudraksha Gupta
- [PATCH v3 4/4] ARM: dts: qcom: Add Samsung Galaxy Express support
Rudraksha Gupta
- [PATCH v3 2/4] dt-bindings: phy: qcom,usb-hs-phy: Add compatible
Rudraksha Gupta
- [PATCH v3 2/4] dt-bindings: phy: qcom,usb-hs-phy: Add compatible
Rudraksha Gupta
- [PATCH v4 0/4] Samsung Galaxy Express SGH-I437 Support
Rudraksha Gupta
- [PATCH v4 1/4] dt-bindings: arm: qcom: Add Samsung Galaxy Express
Rudraksha Gupta
- [PATCH v4 2/4] dt-bindings: phy: qcom,usb-hs-phy: Add compatible
Rudraksha Gupta
- [PATCH v4 3/4] ARM: dts: qcom: msm8960: Add USB node
Rudraksha Gupta
- [PATCH v4 4/4] ARM: dts: qcom: Add Samsung Galaxy Express support
Rudraksha Gupta
- [PATCH v5 0/4] Samsung Galaxy Express SGH-I437 Support
Rudraksha Gupta
- [PATCH v5 1/4] dt-bindings: arm: qcom: Add Samsung Galaxy Express
Rudraksha Gupta
- [PATCH v5 2/4] dt-bindings: phy: qcom,usb-hs-phy: Add compatible
Rudraksha Gupta
- [PATCH v5 3/4] ARM: dts: qcom: msm8960: Add USB node
Rudraksha Gupta
- [PATCH v5 4/4] ARM: dts: qcom: Add Samsung Galaxy Express support
Rudraksha Gupta
- [PATCH v2 1/2] phy: qcom-snps-femto-v2: properly enable ref clock
Andrew Halaney
- [PATCH 01/26] phy: qualcomm: fix indentation in Makefile
Andrew Halaney
- [PATCH 05/26] net: stmmac: dwmac-qcom-ethqos: shrink clock code with devres
Andrew Halaney
- [PATCH 06/26] net: stmmac: dwmac-qcom-ethqos: rename a label in probe()
Andrew Halaney
- [PATCH 07/26] net: stmmac: dwmac-qcom-ethqos: tweak the order of local variables
Andrew Halaney
- [PATCH 08/26] net: stmmac: dwmac-qcom-ethqos: use a helper variable for &pdev->dev
Andrew Halaney
- [PATCH 09/26] net: stmmac: dwmac-qcom-ethqos: add missing include
Andrew Halaney
- [PATCH 10/26] net: stmmac: dwmac-qcom-ethqos: add a newline between headers
Andrew Halaney
- [PATCH 11/26] net: stmmac: dwmac-qcom-ethqos: remove stray space
Andrew Halaney
- [PATCH 12/26] net: stmmac: dwmac-qcom-ethqos: add support for the optional serdes phy
Andrew Halaney
- [PATCH 13/26] net: stmmac: dwmac-qcom-ethqos: make the rgmii clock optional
Andrew Halaney
- [PATCH 14/26] net: stmmac: dwmac-qcom-ethqos: add optional phyaux clock
Andrew Halaney
- [PATCH 15/26] net: stmmac: dwmac-qcom-ethqos: add support for the optional phy-supply
Andrew Halaney
- [PATCH 16/26] net: stmmac: dwmac-qcom-ethqos: prepare the driver for more PHY modes
Andrew Halaney
- [PATCH v2 1/2] phy: qcom-snps-femto-v2: properly enable ref clock
Andrew Halaney
- [PATCH v2 2/2] phy: qcom-snps-femto-v2: add system sleep PM ops
Andrew Halaney
- [PATCH v3 2/4] dt-bindings: phy: qcom,usb-hs-phy: Add compatible
Rob Herring
- [PATCH 2/9] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
Rob Herring
- [PATCH v2 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
Rob Herring
- [PATCH v2 1/2] dt-bindings: phy: add mediatek mipi csi driver v 0.5
Rob Herring
- [PATCH v3 2/3] dt-bindings: phy: add mediatek MIPI CD-PHY module v0.5
Rob Herring
- [PATCH v5 1/3] dt-bindings: phy: Add starfive,jh7110-dphy-rx
Rob Herring
- [PATCH 1/7] dt-bindings: phy: intel,combo-phy: restrict node name suffixes
Rob Herring
- [PATCH 2/7] dt-bindings: pwm: restrict node name suffixes
Rob Herring
- [PATCH 4/7] dt-bindings: slimbus: restrict node name suffixes
Rob Herring
- [PATCH 6/7] dt-bindings: timestamp: restrict node name suffixes
Rob Herring
- [PATCH 7/7] dt-bindings: watchdog: restrict node name suffixes
Rob Herring
- [PATCH v3 4/5] dt-bindings: phy: qcom,msm8996-qmp-usb3-phy: drop legacy bindings
Rob Herring
- [PATCH v4 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
Rob Herring
- [PATCH v4 2/2] dt-bindings: phy: mxs-usb-phy: add imx8ulp and imx8qm compatible
Rob Herring
- [PATCH v6 2/8] dt-bindings: display: bridge: Add Cadence MHDP8501 HDMI and DP
Rob Herring
- [PATCH v6 2/8] dt-bindings: display: bridge: Add Cadence MHDP8501 HDMI and DP
Rob Herring
- [PATCH] dt-bindings: phy: brcm,brcmstb-usb-phy: Fix error in "compatible" conditional schema
Rob Herring
- [PATCH v4 1/2] dt-bindings: phy: add mediatek MIPI CD-PHY module v0.5
Rob Herring
- [PATCH v2 2/6] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
Rob Herring
- [PATCH v6 4/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 2.0 PHY
Rob Herring
- [PATCH 7/7] dt-bindings: watchdog: restrict node name suffixes
Rob Herring
- [PATCH 6/7] dt-bindings: timestamp: restrict node name suffixes
Rob Herring
- [PATCH v2] phy: tegra: xusb: Fix use-after-free issue
Haotien Hsu
- [PATCH v3] phy: tegra: xusb: Clear the driver reference in usb-phy dev
Haotien Hsu
- [PATCH 03/27] dt-bindings: display: mediatek: dpi: Add compatible for MediaTek MT6795
Chun-Kuang Hu
- [PATCH v2] phy: tegra: xusb: Fix use-after-free issue
Jon Hunter
- [PATCH v3] phy: tegra: xusb: Clear the driver reference in usb-phy dev
Jon Hunter
- [PATCH v4 0/6] Support more HDMI modes on RK3228/RK3328
Jonas Karlman
- [PATCH v4 1/6] phy/rockchip: inno-hdmi: use correct vco_div_5 macro on rk3328
Jonas Karlman
- [PATCH v4 2/6] phy/rockchip: inno-hdmi: round fractal pixclock in rk3328 recalc_rate
Jonas Karlman
- [PATCH v4 3/6] phy/rockchip: inno-hdmi: remove unused no_c from rk3328 recalc_rate
Jonas Karlman
- [PATCH v4 4/6] phy/rockchip: inno-hdmi: do not power on rk3328 post pll on reg write
Jonas Karlman
- [PATCH v4 5/6] phy/rockchip: inno-hdmi: force set_rate on power_on
Jonas Karlman
- [PATCH v4 6/6] phy/rockchip: inno-hdmi: add more supported pre-pll rates
Jonas Karlman
- [PATCH v2 00/23] arm64: qcom: sa8775p-ride: enable the first ethernet port
Jakub Kicinski
- [PATCH 2/7] dt-bindings: pwm: restrict node name suffixes
Uwe Kleine-König
- [PATCH v2] phy: tegra: xusb: Fix use-after-free issue
Vinod Koul
- [PATCH 3/9] phy: qcom-m31: Introduce qcom,m31 USB phy driver
Vinod Koul
- [PATCH v7 4/5] phy: starfive: Add JH7110 PCIE 2.0 PHY driver
Vinod Koul
- [PATCH v7 3/5] phy: starfive: Add JH7110 USB 2.0 PHY driver
Vinod Koul
- [PATCH v6 4/8] phy: Add HDMI configuration options
Vinod Koul
- [PATCH v6 7/8] phy: freescale: Add DisplayPort PHY driver for i.MX8MQ
Vinod Koul
- [PATCH v6 8/8] phy: freescale: Add HDMI PHY driver for i.MX8MQ
Vinod Koul
- [PATCH v7 4/5] phy: starfive: Add JH7110 PCIE 2.0 PHY driver
Vinod Koul
- [EXT] Re: [PATCH v4 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
Vinod Koul
- [PATCH v3] phy: tegra: xusb: Clear the driver reference in usb-phy dev
Vinod Koul
- [PATCH 0/2] phy: usb: brcmstb bug fix and improvements
Vinod Koul
- [RESEND PATCH v2 0/3] phy: add the SerDes/SGMII driver for Qualcomm SoCs
Vinod Koul
- [PATCH] phy: qcom: qmp-combo: fix Display Port PHY configuration for SM8550
Vinod Koul
- [PATCH v5 2/3] phy: starfive: Add mipi dphy rx support
Vinod Koul
- [PATCH v5 2/4] dt-bindings: phy: qcom,usb-hs-phy: Add compatible
Vinod Koul
- [PATCH 1/7] dt-bindings: phy: intel,combo-phy: restrict node name suffixes
Vinod Koul
- [PATCH v2 1/1] dt-bindings: phy: mixel,mipi-dsi-phy: Remove assigned-clock* properties
Vinod Koul
- [PATCH] phy: tegra: xusb: check return value of devm_kzalloc()
Vinod Koul
- [PATCH v3] phy: cadence: Sierra: Add single link SGMII register configuration
Vinod Koul
- [PATCH v3] phy: cadence: Sierra: Add single link SGMII register configuration
Vinod Koul
- [PATCH] dt-bindings: phy: brcm,brcmstb-usb-phy: Fix error in "compatible" conditional schema
Vinod Koul
- [PATCH v2 3/3] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 2.0/3.0 PHY
Krzysztof Kozlowski
- [PATCH 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
Krzysztof Kozlowski
- [PATCH v2 3/3] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 2.0/3.0 PHY
Krzysztof Kozlowski
- [PATCH 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
Krzysztof Kozlowski
- [PATCH v3 1/3] dt-bindings: phy: add PHY_TYPE_CDPHY definition
Krzysztof Kozlowski
- [PATCH v3 2/4] dt-bindings: phy: qcom,usb-hs-phy: Add compatible
Krzysztof Kozlowski
- [PATCH v3 2/4] dt-bindings: phy: qcom,usb-hs-phy: Add compatible
Krzysztof Kozlowski
- [PATCH v4 2/4] dt-bindings: phy: qcom,usb-hs-phy: Add compatible
Krzysztof Kozlowski
- [PATCH v5 2/4] dt-bindings: phy: qcom,usb-hs-phy: Add compatible
Krzysztof Kozlowski
- [PATCH 2/7] dt-bindings: pwm: restrict node name suffixes
Krzysztof Kozlowski
- [PATCH v3 3/5] phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY
Krzysztof Kozlowski
- [PATCH v3 2/5] phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY
Krzysztof Kozlowski
- [PATCH v3 4/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 2.0 PHY
Krzysztof Kozlowski
- [PATCH v3 5/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 3.0 PHY
Krzysztof Kozlowski
- [PATCH 2/9] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
Krzysztof Kozlowski
- [PATCH 1/9] dt-bindings: usb: dwc3: Add IPQ5332 compatible
Krzysztof Kozlowski
- [PATCH 7/9] arm64: dts: qcom: ipq5332: Add USB related nodes
Krzysztof Kozlowski
- [PATCH 9/9] arm64: defconfig: Enable QCOM M31 USB phy driver
Krzysztof Kozlowski
- [PATCH 6/9] phy: qcom: Add qcom,m31 USB phy driver
Krzysztof Kozlowski
- [PATCH 5/9] phy: qcom-m31: Introduce qcom,m31 USB phy
Krzysztof Kozlowski
- [PATCH v3 2/5] phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY
Krzysztof Kozlowski
- [PATCH v3 2/5] phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY
Krzysztof Kozlowski
- [PATCH v3 2/5] phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY
Krzysztof Kozlowski
- [PATCH v3 3/5] phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY
Krzysztof Kozlowski
- [PATCH v3 4/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 2.0 PHY
Krzysztof Kozlowski
- [PATCH v3 5/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 3.0 PHY
Krzysztof Kozlowski
- [PATCH v3 4/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 2.0 PHY
Krzysztof Kozlowski
- [PATCH v3 4/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 2.0 PHY
Krzysztof Kozlowski
- [PATCH v2 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
Krzysztof Kozlowski
- [PATCH v3 1/5] dt-bindings: ata: dwc-ahci: add PHY clocks
Krzysztof Kozlowski
- [PATCH v3 1/5] dt-bindings: ata: dwc-ahci: add PHY clocks
Krzysztof Kozlowski
- [PATCH v3 2/5] dt-bindings: ata: dwc-ahci: add Rockchip RK3588
Krzysztof Kozlowski
- [PATCH v3 3/5] dt-bindings: phy: rockchip: rk3588 has two reset lines
Krzysztof Kozlowski
- [PATCH v3 2/5] dt-bindings: ata: dwc-ahci: add Rockchip RK3588
Krzysztof Kozlowski
- [PATCH v3 2/5] dt-bindings: ata: dwc-ahci: add Rockchip RK3588
Krzysztof Kozlowski
- [PATCH v4 2/5] dt-bindings: ata: dwc-ahci: add Rockchip RK3588
Krzysztof Kozlowski
- [EXT] Re: [PATCH v2 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
Krzysztof Kozlowski
- [PATCH v4 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
Krzysztof Kozlowski
- [PATCH v2 2/2] dt-bindings: phy: mxs-usb-phy: add imx8ulp and imx8qm compatible
Krzysztof Kozlowski
- [PATCH 02/26] dt-bindings: phy: describe the Qualcomm SGMII PHY
Krzysztof Kozlowski
- [PATCH 04/26] arm64: defconfig: enable the SerDes PHY for Qualcomm DWMAC
Krzysztof Kozlowski
- [PATCH 19/26] dt-bindings: net: snps,dwmac: add compatible for sa8775p ethqos
Krzysztof Kozlowski
- [PATCH 20/26] dt-bindings: net: qcom,ethqos: add description for sa8775p
Krzysztof Kozlowski
- [PATCH 2/2] usb: phy: mxs: add DT bindings to hold data line
Krzysztof Kozlowski
- [PATCH 1/2] dt-bindings: phy: fsl,mxs-usbphy: add fsl,hold-line-without-vbus property
Krzysztof Kozlowski
- [PATCH v2 17/23] dt-bindings: net: qcom,ethqos: add description for sa8775p
Krzysztof Kozlowski
- [PATCH v4 4/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 2.0 PHY
Krzysztof Kozlowski
- [PATCH v4 2/5] phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY
Krzysztof Kozlowski
- [PATCH v4 3/5] phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY
Krzysztof Kozlowski
- [PATCH v4 5/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 3.0 PHY
Krzysztof Kozlowski
- [PATCH 2/9] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
Krzysztof Kozlowski
- [EXT] Re: [PATCH v6 2/8] dt-bindings: display: bridge: Add Cadence MHDP8501 HDMI and DP
Krzysztof Kozlowski
- [PATCH 2/9] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
Krzysztof Kozlowski
- [PATCH v2 2/6] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
Krzysztof Kozlowski
- [PATCH v2 2/6] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
Krzysztof Kozlowski
- [PATCH v3 01/11] dt-bindings: phy: migrate QMP UFS PHY bindings to qcom,sc8280xp-qmp-ufs-phy.yaml
Krzysztof Kozlowski
- [PATCH v5 4/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 2.0 PHY
Krzysztof Kozlowski
- [PATCH v6 5/7] dt-bindings: usb: Add StarFive JH7110 USB controller
Greg Kroah-Hartman
- [PATCH v5 0/3] Add JH7110 MIPI DPHY RX support
Changhuang Liang
- [PATCH v5 2/3] phy: starfive: Add mipi dphy rx support
Changhuang Liang
- [PATCH v6 0/2] Add JH7110 MIPI DPHY RX support
Changhuang Liang
- [PATCH v6 1/2] dt-bindings: phy: Add starfive,jh7110-dphy-rx
Changhuang Liang
- [PATCH v6 2/2] phy: starfive: Add mipi dphy rx support
Changhuang Liang
- [PATCH 1/1] dt-bindings: phy: mixel,mipi-dsi-phy: Remove assigned-clock* properties
Ying Liu
- [PATCH V2 0/2] phy: xilinx: phy-zynqmp: dynamic clock support
Piyush Mehta
- [PATCH V2 1/2] phy: xilinx: add runtime PM support
Piyush Mehta
- [PATCH V2 2/2] phy: xilinx: phy-zynqmp: dynamic clock support for power-save
Piyush Mehta
- [PATCH] dt-bindings: phy: brcm,brcmstb-usb-phy: Fix error in "compatible" conditional schema
Rafał Miłecki
- [PATCH v4 5/5] arm64: dts: rockchip: rk3588: add SATA support
Damien Le Moal
- [PATCH v4 5/5] arm64: dts: rockchip: rk3588: add SATA support
Damien Le Moal
- [PATCH v4 0/5] Add RK3588 SATA support
Damien Le Moal
- [PATCH 0/9] Enable IPQ5332 USB2
Varadarajan Narayanan
- [PATCH 1/9] dt-bindings: usb: dwc3: Add IPQ5332 compatible
Varadarajan Narayanan
- [PATCH 2/9] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
Varadarajan Narayanan
- [PATCH 3/9] phy: qcom-m31: Introduce qcom,m31 USB phy driver
Varadarajan Narayanan
- [PATCH 4/9] clk: qcom: ipq5332: Fix USB related clock defines
Varadarajan Narayanan
- [PATCH 5/9] phy: qcom-m31: Introduce qcom,m31 USB phy
Varadarajan Narayanan
- [PATCH 6/9] phy: qcom: Add qcom,m31 USB phy driver
Varadarajan Narayanan
- [PATCH 7/9] arm64: dts: qcom: ipq5332: Add USB related nodes
Varadarajan Narayanan
- [PATCH 8/9] arm64: dts: qcom: ipq5332: Enable USB
Varadarajan Narayanan
- [PATCH 9/9] arm64: defconfig: Enable QCOM M31 USB phy driver
Varadarajan Narayanan
- [PATCH 1/9] dt-bindings: usb: dwc3: Add IPQ5332 compatible
Varadarajan Narayanan
- [PATCH 2/9] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
Varadarajan Narayanan
- [PATCH 3/9] phy: qcom-m31: Introduce qcom,m31 USB phy driver
Varadarajan Narayanan
- [PATCH 3/9] phy: qcom-m31: Introduce qcom,m31 USB phy driver
Varadarajan Narayanan
- [PATCH 4/9] clk: qcom: ipq5332: Fix USB related clock defines
Varadarajan Narayanan
- [PATCH 5/9] phy: qcom-m31: Introduce qcom,m31 USB phy
Varadarajan Narayanan
- [PATCH 6/9] phy: qcom: Add qcom,m31 USB phy driver
Varadarajan Narayanan
- [PATCH 7/9] arm64: dts: qcom: ipq5332: Add USB related nodes
Varadarajan Narayanan
- [PATCH 7/9] arm64: dts: qcom: ipq5332: Add USB related nodes
Varadarajan Narayanan
- [PATCH 7/9] arm64: dts: qcom: ipq5332: Add USB related nodes
Varadarajan Narayanan
- [PATCH 9/9] arm64: defconfig: Enable QCOM M31 USB phy driver
Varadarajan Narayanan
- [PATCH 2/9] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
Varadarajan Narayanan
- [PATCH 2/9] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
Varadarajan Narayanan
- [PATCH v1 0/6] Enable IPQ5332 USB2
Varadarajan Narayanan
- [PATCH v2 1/6] dt-bindings: usb: dwc3: Add IPQ5332 compatible
Varadarajan Narayanan
- [PATCH v2 2/6] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
Varadarajan Narayanan
- [PATCH v2 3/6] phy: qcom-m31: Introduce qcom,m31 USB phy driver
Varadarajan Narayanan
- [PATCH v2 4/6] arm64: dts: qcom: ipq5332: Add USB related nodes
Varadarajan Narayanan
- [PATCH v2 5/6] arm64: dts: qcom: ipq5332: Enable USB
Varadarajan Narayanan
- [PATCH v2 6/6] arm64: defconfig: Enable M31 USB phy driver
Varadarajan Narayanan
- [PATCH v2 2/6] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
Varadarajan Narayanan
- [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes
Vladimir Oltean
- [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes
Vladimir Oltean
- [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes
Vladimir Oltean
- [PATCH v3 0/5] arm64: qcom: sa8775p: add support for UFS
Martin K. Petersen
- [PATCH 0/2] PHY: Add support for single link USXGMII in Cadence Torrent PHY driver
Roger Quadros
- [PATCH v8 3/3] phy: mediatek: add support for phy-mtk-hdmi-mt8195
Guillaume Ranquet
- [PATCH v6 3/8] drm: bridge: Cadence: Add MHDP8501 DP driver
Sam Ravnborg
- [PATCH] phy: tegra: xusb: check return value of devm_kzalloc()
Thierry Reding
- [PATCH v2] phy: tegra: xusb: Fix use-after-free issue
Thierry Reding
- (subset) [PATCH 0/7] dt-bindings: restrict node name suffixes
Thierry Reding
- [PATCH v3 0/5] Add RK3588 SATA support
Sebastian Reichel
- [PATCH v3 1/5] dt-bindings: ata: dwc-ahci: add PHY clocks
Sebastian Reichel
- [PATCH v3 2/5] dt-bindings: ata: dwc-ahci: add Rockchip RK3588
Sebastian Reichel
- [PATCH v3 3/5] dt-bindings: phy: rockchip: rk3588 has two reset lines
Sebastian Reichel
- [PATCH v3 4/5] arm64: dts: rockchip: rk3588: add combo PHYs
Sebastian Reichel
- [PATCH v3 5/5] arm64: dts: rockchip: rk3588: add SATA support
Sebastian Reichel
- [PATCH v4 0/5] Add RK3588 SATA support
Sebastian Reichel
- [PATCH v4 1/5] dt-bindings: ata: dwc-ahci: add PHY clocks
Sebastian Reichel
- [PATCH v4 2/5] dt-bindings: ata: dwc-ahci: add Rockchip RK3588
Sebastian Reichel
- [PATCH v4 3/5] dt-bindings: phy: rockchip: rk3588 has two reset lines
Sebastian Reichel
- [PATCH v4 4/5] arm64: dts: rockchip: rk3588: add combo PHYs
Sebastian Reichel
- [PATCH v4 5/5] arm64: dts: rockchip: rk3588: add SATA support
Sebastian Reichel
- [PATCH v4 03/68] clk: Move no reparent case into a separate function
Maxime Ripard
- [PATCH v2 2/6] dt-bindings: ata: ahci: add RK3588 AHCI controller
Serge Semin
- [PATCH v2 3/6] dt-bindings: ata: ahci: dwc: enforce rockchip clocks
Serge Semin
- [PATCH v3 1/5] dt-bindings: ata: dwc-ahci: add PHY clocks
Serge Semin
- [PATCH v3 2/5] dt-bindings: ata: dwc-ahci: add Rockchip RK3588
Serge Semin
- [PATCH v3 2/5] dt-bindings: ata: dwc-ahci: add Rockchip RK3588
Serge Semin
- [PATCH v3 2/5] dt-bindings: ata: dwc-ahci: add Rockchip RK3588
Serge Semin
- [PATCH v4 2/5] dt-bindings: ata: dwc-ahci: add Rockchip RK3588
Serge Semin
- [PATCH 1/1] dt-bindings: phy: mixel,mipi-dsi-phy: Remove assigned-clock* properties
Alexander Stein
- [PATCH 1/1] dt-bindings: phy: mixel, mipi-dsi-phy: Remove assigned-clock* properties
Alexander Stein
- [PATCH 1/1] dt-bindings: phy: mixel, mipi-dsi-phy: Remove assigned-clock* properties
Alexander Stein
- [PATCH v2 1/1] dt-bindings: phy: mixel,mipi-dsi-phy: Remove assigned-clock* properties
Alexander Stein
- [PATCH v6 5/8] drm: bridge: Cadence: Add MHDP8501 HDMI driver
Alexander Stein
- [PATCH v6 2/8] dt-bindings: display: bridge: Add Cadence MHDP8501 HDMI and DP
Alexander Stein
- [PATCH v6 6/8] dt-bindings: phy: Add Freescale iMX8MQ DP and HDMI PHY
Alexander Stein
- [PATCH v6 0/8] Initial support for Cadence MHDP8501(HDMI/DP) for i.MX8MQ
Alexander Stein
- [EXT] Re: [PATCH v6 5/8] drm: bridge: Cadence: Add MHDP8501 HDMI driver
Alexander Stein
- [PATCH v2 1/2] dt-bindings: phy: add mediatek mipi csi driver v 0.5
Julien Stephan
- [PATCH v4 0/3] phy: mtk-mipi-csi: add driver for CSI phy
Julien Stephan
- [PATCH v4 1/2] dt-bindings: phy: add mediatek MIPI CD-PHY module v0.5
Julien Stephan
- [PATCH v4 2/2] phy: mtk-mipi-csi: add driver for CSI phy
Julien Stephan
- (subset) [PATCH v2 0/6] Add RK3588 SATA support
Heiko Stuebner
- [PATCH v4 5/5] arm64: dts: rockchip: rk3588: add SATA support
Heiko Stübner
- [PATCH v4 03/68] clk: Move no reparent case into a separate function
Marek Szyprowski
- [PATCH v4 03/68] clk: Move no reparent case into a separate function
Marek Szyprowski
- [PATCH RFC 1/2] phy: qcom-snps-femto-v2: properly enable ref clock
Adrien Thierry
- [PATCH RFC 2/2] phy: qcom-snps-femto-v2: Remove AHB2PHY interface clock
Adrien Thierry
- [PATCH v2 0/2] Clock fixes for qcom-snps-femto-v2 PHY driver
Adrien Thierry
- [PATCH v2 1/2] phy: qcom-snps-femto-v2: properly enable ref clock
Adrien Thierry
- [PATCH v2 2/2] phy: qcom-snps-femto-v2: add system sleep PM ops
Adrien Thierry
- [PATCH v2 1/2] phy: qcom-snps-femto-v2: properly enable ref clock
Adrien Thierry
- [PATCH v2 0/2] Clock fixes for qcom-snps-femto-v2 PHY driver
Adrien Thierry
- [PATCH v3 0/3] Fixes for qcom-snps-femto-v2 PHY driver
Adrien Thierry
- [PATCH v3 1/3] phy: qcom-snps-femto-v2: properly enable ref clock
Adrien Thierry
- [PATCH v3 2/3] phy: qcom-snps-femto-v2: add system sleep PM ops
Adrien Thierry
- [PATCH v3 3/3] phy: qcom-snps-femto-v2: use qcom_snps_hsphy_do_suspend/resume error code
Adrien Thierry
- [PATCH v3 2/3] phy: qcom-snps-femto-v2: add system sleep PM ops
Adrien Thierry
- [PATCH v3 2/3] phy: qcom-snps-femto-v2: add system sleep PM ops
Adrien Thierry
- [PATCH v4 0/3] Fixes for qcom-snps-femto-v2 PHY driver
Adrien Thierry
- [PATCH v4 1/3] phy: qcom-snps-femto-v2: keep cfg_ahb_clk enabled during runtime suspend
Adrien Thierry
- [PATCH v4 2/3] phy: qcom-snps-femto-v2: properly enable ref clock
Adrien Thierry
- [PATCH v4 3/3] phy: qcom-snps-femto-v2: use qcom_snps_hsphy_suspend/resume error code
Adrien Thierry
- [PATCH v2 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
Stefan Wahren
- [EXT] Re: [PATCH v2 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
Stefan Wahren
- [PATCH v4] phy: cadence: Sierra: Add single link SGMII register configuration
Marcin Wierzbicki
- [PATCH 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
Xu Yang
- [PATCH 2/2] dt-bindings: phy: mxs-usb-phy: add imx8ulp and imx8qm compatible
Xu Yang
- [EXT] Re: [PATCH 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
Xu Yang
- [PATCH v2 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
Xu Yang
- [PATCH v2 2/2] dt-bindings: phy: mxs-usb-phy: add imx8ulp and imx8qm compatible
Xu Yang
- [PATCH v3 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
Xu Yang
- [PATCH v3 2/2] dt-bindings: phy: mxs-usb-phy: add imx8ulp and imx8qm compatible
Xu Yang
- [EXT] Re: [PATCH v2 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
Xu Yang
- [EXT] Re: [PATCH v2 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
Xu Yang
- [EXT] Re: [PATCH v2 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
Xu Yang
- [EXT] Re: [PATCH v2 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
Xu Yang
- [PATCH v4 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
Xu Yang
- [PATCH v4 2/2] dt-bindings: phy: mxs-usb-phy: add imx8ulp and imx8qm compatible
Xu Yang
- [EXT] Re: [PATCH v2 2/2] dt-bindings: phy: mxs-usb-phy: add imx8ulp and imx8qm compatible
Xu Yang
- [PATCH 1/2] dt-bindings: phy: fsl,mxs-usbphy: add fsl,hold-line-without-vbus property
Xu Yang
- [PATCH 2/2] usb: phy: mxs: add DT bindings to hold data line
Xu Yang
- [EXT] Re: [PATCH v4 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
Xu Yang
- [EXT] Re: [PATCH v4 2/2] dt-bindings: phy: mxs-usb-phy: add imx8ulp and imx8qm compatible
Xu Yang
- [PATCH v6 0/8] Initial support for Cadence MHDP8501(HDMI/DP) for i.MX8MQ
Sandor Yu
- [PATCH v6 1/8] drm: bridge: Cadence: convert mailbox functions to macro functions
Sandor Yu
- [PATCH v6 2/8] dt-bindings: display: bridge: Add Cadence MHDP8501 HDMI and DP
Sandor Yu
- [PATCH v6 3/8] drm: bridge: Cadence: Add MHDP8501 DP driver
Sandor Yu
- [PATCH v6 4/8] phy: Add HDMI configuration options
Sandor Yu
- [PATCH v6 5/8] drm: bridge: Cadence: Add MHDP8501 HDMI driver
Sandor Yu
- [PATCH v6 6/8] dt-bindings: phy: Add Freescale iMX8MQ DP and HDMI PHY
Sandor Yu
- [PATCH v6 7/8] phy: freescale: Add DisplayPort PHY driver for i.MX8MQ
Sandor Yu
- [PATCH v6 8/8] phy: freescale: Add HDMI PHY driver for i.MX8MQ
Sandor Yu
- [EXT] Re: [PATCH v6 3/8] drm: bridge: Cadence: Add MHDP8501 DP driver
Sandor Yu
- [EXT] Re: [PATCH v6 6/8] dt-bindings: phy: Add Freescale iMX8MQ DP and HDMI PHY
Sandor Yu
- [EXT] Re: [PATCH v6 2/8] dt-bindings: display: bridge: Add Cadence MHDP8501 HDMI and DP
Sandor Yu
- [EXT] Re: [PATCH v6 5/8] drm: bridge: Cadence: Add MHDP8501 HDMI driver
Sandor Yu
- [EXT] Re: [PATCH v6 2/8] dt-bindings: display: bridge: Add Cadence MHDP8501 HDMI and DP
Sandor Yu
- [PATCH v3 2/5] phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY
kernel test robot
- [PATCH v3 2/5] phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY
kernel test robot
- [PATCH v3 3/5] phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY
kernel test robot
- [PATCH v4 2/5] phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY
kernel test robot
- [PATCH v4 3/5] phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY
kernel test robot
- [PATCH v7 4/5] phy: starfive: Add JH7110 PCIE 2.0 PHY driver
kernel test robot
- [PATCH v7 4/5] phy: starfive: Add JH7110 PCIE 2.0 PHY driver
kernel test robot
Last message date:
Fri Jun 30 11:21:49 PDT 2023
Archived on: Fri Jun 30 11:21:59 PDT 2023
This archive was generated by
Pipermail 0.09 (Mailman edition).