[PATCH v4 1/5] dt-bindings: ata: dwc-ahci: add PHY clocks

[Sebastian Reichel]

Add PHY transmit and receive clocks as described by the
DW SATA AHCI HW manual.

Suggested-by: Serge Semin <fancer.lancer at gmail.com>
Reviewed-by: Serge Semin <fancer.lancer at gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.com>
---
 .../devicetree/bindings/ata/snps,dwc-ahci-common.yaml     | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml
index c1457910520b..34c5bf65b02d 100644
--- a/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml
+++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml
@@ -31,11 +31,11 @@ properties:
       PM-alive clock, RxOOB detection clock, embedded PHYs reference (Rx/Tx)
       clock, etc.
     minItems: 1
-    maxItems: 4
+    maxItems: 6
 
   clock-names:
     minItems: 1
-    maxItems: 4
+    maxItems: 6
     items:
       oneOf:
         - description: Application APB/AHB/AXI BIU clock
@@ -48,6 +48,10 @@ properties:
           const: pmalive
         - description: RxOOB detection clock
           const: rxoob
+        - description: PHY Transmit Clock
+          const: asic
+        - description: PHY Receive Clock
+          const: rbc
         - description: SATA Ports reference clock
           const: ref
 
-- 
2.39.2