[PATCH v4 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
Rob Herring
robh at kernel.org
Tue Jun 20 08:29:21 PDT 2023
On Tue, Jun 13, 2023 at 04:34:44PM +0800, Xu Yang wrote:
> Convert the binding to DT schema format. Besides, this also add clocks,
> '#phy-cells', phy-3p0-supply and power-domains properties which are not
> contained in txt file due to txt file lack updates.
>
> Signed-off-by: Xu Yang <xu.yang_2 at nxp.com>
>
> ---
> Changes in v2:
> - change filename to fsl,mxs-usbphy.yaml
> - add other optional properties
> - narrow fsl,anatop to imx6
> - use additionalProperties
> Changes in v3:
> - fix indentation
> - add clocks property to example
> Changes in v4:
> - remove [fsl,imx7ulp-usbphy, fsl,imx6ul-usbphy]
> - limit item of reg and interrupts to 1
> - sort enum items
> - modify commit message
> ---
> .../bindings/phy/fsl,mxs-usbphy.yaml | 125 ++++++++++++++++++
> .../devicetree/bindings/phy/mxs-usb-phy.txt | 33 -----
> 2 files changed, 125 insertions(+), 33 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
> delete mode 100644 Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
This should be applied by the PHY maintainers, but they weren't Cc'ed.
>
> diff --git a/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
> new file mode 100644
> index 000000000000..cc9f2bc7e6fb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
> @@ -0,0 +1,125 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale MXS USB Phy Device
> +
> +maintainers:
> + - Xu Yang <xu.yang_2 at nxp.com>
> +
> +properties:
> + compatible:
> + oneOf:
> + - enum:
> + - fsl,imx23-usbphy
> + - fsl,imx7ulp-usbphy
> + - fsl,vf610-usbphy
> + - items:
> + - enum:
> + - fsl,imx28-usbphy
> + - fsl,imx6ul-usbphy
> + - fsl,imx6sl-usbphy
> + - fsl,imx6sx-usbphy
> + - fsl,imx6q-usbphy
> + - const: fsl,imx23-usbphy
> + - items:
> + - const: fsl,imx6sll-usbphy
> + - const: fsl,imx6ul-usbphy
> + - const: fsl,imx23-usbphy
> + - items:
> + - const: fsl,imx8dxl-usbphy
> + - const: fsl,imx7ulp-usbphy
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + '#phy-cells':
> + const: 0
> +
> + power-domains:
> + maxItems: 1
> +
> + fsl,anatop:
> + description:
> + phandle for anatop register, it is only for imx6 SoC series.
> + $ref: /schemas/types.yaml#/definitions/phandle
> +
> + phy-3p0-supply:
> + description:
> + One of USB PHY's power supply. Can be used to keep a good signal
> + quality.
> +
> + fsl,tx-cal-45-dn-ohms:
> + description:
> + Resistance (in ohms) of switchable high-speed trimming resistor
> + connected in parallel with the 45 ohm resistor that terminates
> + the DN output signal.
> + minimum: 35
> + maximum: 54
> + default: 45
> +
> + fsl,tx-cal-45-dp-ohms:
> + description:
> + Resistance (in ohms) of switchable high-speed trimming resistor
> + connected in parallel with the 45 ohm resistor that terminates
> + the DP output signal.
> + minimum: 35
> + maximum: 54
> + default: 45
> +
> + fsl,tx-d-cal:
> + description:
> + Current trimming value (as a percentage) of the 17.78 mA TX
> + reference current.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 79
> + maximum: 119
> + default: 100
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + oneOf:
> + - enum:
> + - fsl,imx6q-usbphy
> + - fsl,imx6sl-usbphy
> + - fsl,imx6sx-usbphy
> + - fsl,imx6sll-usbphy
> + - fsl,vf610-usbphy
> + - items:
> + - const: fsl,imx6ul-usbphy
> + - const: fsl,imx23-usbphy
> + then:
> + required:
> + - fsl,anatop
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/imx6qdl-clock.h>
> +
> + usbphy1: usb-phy at 20c9000 {
> + compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
> + reg = <0x020c9000 0x1000>;
> + clocks = <&clks IMX6QDL_CLK_USBPHY1>;
> + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> + fsl,anatop = <&anatop>;
> + };
> +
> +...
> diff --git a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
> deleted file mode 100644
> index 70c813b0755f..000000000000
> --- a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
> +++ /dev/null
> @@ -1,33 +0,0 @@
> -* Freescale MXS USB Phy Device
> -
> -Required properties:
> -- compatible: should contain:
> - * "fsl,imx23-usbphy" for imx23 and imx28
> - * "fsl,imx6q-usbphy" for imx6dq and imx6dl
> - * "fsl,imx6sl-usbphy" for imx6sl
> - * "fsl,vf610-usbphy" for Vybrid vf610
> - * "fsl,imx6sx-usbphy" for imx6sx
> - * "fsl,imx7ulp-usbphy" for imx7ulp
> - * "fsl,imx8dxl-usbphy" for imx8dxl
> - "fsl,imx23-usbphy" is still a fallback for other strings
> -- reg: Should contain registers location and length
> -- interrupts: Should contain phy interrupt
> -- fsl,anatop: phandle for anatop register, it is only for imx6 SoC series
> -
> -Optional properties:
> -- fsl,tx-cal-45-dn-ohms: Integer [35-54]. Resistance (in ohms) of switchable
> - high-speed trimming resistor connected in parallel with the 45 ohm resistor
> - that terminates the DN output signal. Default: 45
> -- fsl,tx-cal-45-dp-ohms: Integer [35-54]. Resistance (in ohms) of switchable
> - high-speed trimming resistor connected in parallel with the 45 ohm resistor
> - that terminates the DP output signal. Default: 45
> -- fsl,tx-d-cal: Integer [79-119]. Current trimming value (as a percentage) of
> - the 17.78mA TX reference current. Default: 100
> -
> -Example:
> -usbphy1: usb-phy at 20c9000 {
> - compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
> - reg = <0x020c9000 0x1000>;
> - interrupts = <0 44 0x04>;
> - fsl,anatop = <&anatop>;
> -};
> --
> 2.34.1
>
More information about the linux-phy
mailing list