[PATCH v2 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format

[Rob Herring]

On Thu, 08 Jun 2023 11:36:41 +0800, Xu Yang wrote:
> Convert the binding to DT schema format. Besides, this also add other
> optional properties not contained in txt file.
> 
> Signed-off-by: Xu Yang <xu.yang_2 at nxp.com>
> 
> ---
> Changes in v2:
>  - change filename to fsl,mxs-usbphy.yaml
>  - add other optional properties
>  - narrow fsl,anatop to imx6
>  - use additionalProperties
> ---
>  .../bindings/phy/fsl,mxs-usbphy.yaml          | 128 ++++++++++++++++++
>  .../devicetree/bindings/phy/mxs-usb-phy.txt   |  33 -----
>  2 files changed, 128 insertions(+), 33 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
>  delete mode 100644 Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml:103:15: [warning] wrong indentation: expected 16 but found 14 (indentation)
./Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml:109:15: [warning] wrong indentation: expected 16 but found 14 (indentation)

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.example.dtb: usb-phy at 20c9000: 'clocks' is a required property
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230608033642.4097956-1-xu.yang_2@nxp.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.