[RESEND PATCH 1/7] phy: qcom: qmp-combo: correct bias0_en programming

[Dmitry Baryshkov]

It seems the commit a2e927b0e50d ("phy: qcom-qmp-combo: Add sc8280xp
USB/DP combo phys") contained a typo for selecting bias0_en values.
First, bias0_en and bias1_en are expected to be symmetrical, and then
the vendor driver also uses `flipped : 0x3E : 0x15` statement for
bias0_en. Correct bias0_en programming to follow this.

Fixes: 49742e9edab3 ("phy: qcom-qmp-combo: Add support for SM8550")
Fixes: a2e927b0e50d ("phy: qcom-qmp-combo: Add sc8280xp USB/DP combo phys")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index bebce8c591a3..9d03b7b8e00c 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -2322,7 +2322,7 @@ static int qmp_v5_configure_dp_phy(struct qmp_combo *qmp)
 		return ret;
 
 	if (dp_opts->lanes == 1) {
-		bias0_en = reverse ? 0x3e : 0x1a;
+		bias0_en = reverse ? 0x3e : 0x15;
 		drvr0_en = reverse ? 0x13 : 0x10;
 		bias1_en = reverse ? 0x15 : 0x3e;
 		drvr1_en = reverse ? 0x10 : 0x13;
@@ -2382,7 +2382,7 @@ static int qmp_v6_configure_dp_phy(struct qmp_combo *qmp)
 		return ret;
 
 	if (dp_opts->lanes == 1) {
-		bias0_en = reverse ? 0x3e : 0x1a;
+		bias0_en = reverse ? 0x3e : 0x15;
 		drvr0_en = reverse ? 0x13 : 0x10;
 		bias1_en = reverse ? 0x15 : 0x3e;
 		drvr1_en = reverse ? 0x10 : 0x13;
-- 
2.39.2