May 2026 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Fri May 1 02:37:01 PDT 2026
Ending: Sun May 31 07:50:54 PDT 2026
Messages: 238

• [PATCH 1/2] dt-bindings: i3c: add binding for Realtek RTS490x I3C HUB   Krzysztof Kozlowski
  • [PATCH 1/2] dt-bindings: i3c: add binding for Realtek RTS490x I3C HUB   Frank Li
    • 答复: [PATCH 1/2] dt-bindings: i3c: add binding for Realtek RTS490x I3C HUB   周寅
  • 答复: [PATCH 1/2] dt-bindings: i3c: add binding for Realtek RTS490x I3C HUB   周寅
• [PATCH V3 00/16] i3c: mipi-i3c-hci: DMA abort, recovery and related improvements   Adrian Hunter
  • [PATCH V3 02/16] i3c: mipi-i3c-hci: Preserve RUN bit when aborting DMA ring   Adrian Hunter
  • [PATCH V3 03/16] i3c: mipi-i3c-hci: Prevent DMA enqueue while ring is aborting or in error   Adrian Hunter
    • [PATCH V3 03/16] i3c: mipi-i3c-hci: Prevent DMA enqueue while ring is aborting or in error   Frank Li
  • [PATCH V3 04/16] i3c: mipi-i3c-hci: Wait for DMA ring restart to complete   Adrian Hunter
    • [PATCH V3 04/16] i3c: mipi-i3c-hci: Wait for DMA ring restart to complete   Frank Li
  • [PATCH V3 05/16] i3c: mipi-i3c-hci: Move hci_dma_xfer_done() definition   Adrian Hunter
  • [PATCH V3 06/16] i3c: mipi-i3c-hci: Call hci_dma_xfer_done() from dequeue path   Adrian Hunter
  • [PATCH V3 07/16] i3c: mipi-i3c-hci: Complete transfer lists immediately on error   Adrian Hunter
    • [PATCH V3 07/16] i3c: mipi-i3c-hci: Complete transfer lists immediately on error   Frank Li
  • [PATCH V3 08/16] i3c: mipi-i3c-hci: Avoid restarting DMA ring after aborting wrong transfer   Adrian Hunter
    • [PATCH V3 08/16] i3c: mipi-i3c-hci: Avoid restarting DMA ring after aborting wrong transfer   Frank Li
      • [PATCH V3 08/16] i3c: mipi-i3c-hci: Avoid restarting DMA ring after aborting wrong transfer   Adrian Hunter
  • [PATCH V3 09/16] i3c: mipi-i3c-hci: Add DMA ring abort/reset quirk for Intel controllers   Adrian Hunter
    • [PATCH V3 09/16] i3c: mipi-i3c-hci: Add DMA ring abort/reset quirk for Intel controllers   Frank Li
  • [PATCH V3 10/16] i3c: mipi-i3c-hci: Add DMA ring abort quirk for Intel controllers   Adrian Hunter
    • [PATCH V3 10/16] i3c: mipi-i3c-hci: Add DMA ring abort quirk for Intel controllers   Frank Li
  • [PATCH V3 11/16] i3c: mipi-i3c-hci: Factor out reset-and-restore helper   Adrian Hunter
    • [PATCH V3 11/16] i3c: mipi-i3c-hci: Factor out reset-and-restore helper   Frank Li
  • [PATCH V3 12/16] i3c: mipi-i3c-hci: Add DMA-mode recovery for internal controller errors   Adrian Hunter
  • [PATCH V3 13/16] i3c: mipi-i3c-hci: Wait for NoOp commands to complete   Adrian Hunter
    • [PATCH V3 13/16] i3c: mipi-i3c-hci: Wait for NoOp commands to complete   Frank Li
  • [PATCH V3 14/16] i3c: mipi-i3c-hci: Base timeouts on actual transfer start time   Adrian Hunter
    • [PATCH V3 14/16] i3c: mipi-i3c-hci: Base timeouts on actual transfer start time   Frank Li
  • [PATCH V3 15/16] i3c: mipi-i3c-hci: Consolidate DMA ring allocation   Adrian Hunter
    • [PATCH V3 15/16] i3c: mipi-i3c-hci: Consolidate DMA ring allocation   Frank Li
  • [PATCH V3 16/16] i3c: mipi-i3c-hci: Increase DMA transfer ring size to maximum   Adrian Hunter
    • [PATCH V3 16/16] i3c: mipi-i3c-hci: Increase DMA transfer ring size to maximum   Frank Li
  • [PATCH V3 00/16] i3c: mipi-i3c-hci: DMA abort, recovery and related improvements   Adrian Hunter
• [PATCH V3 01/16] i3c: mipi-i3c-hci: Fix suspend behavior when bus disable falls back to software reset   Adrian Hunter
• [PATCH 2/2] staging: i3c: add Realtek RTS490x I3C HUB driver   Greg KH
  • 答复: [PATCH 2/2] staging: i3c: add Realtek RTS490x I3C HUB driver   周寅
    • 答复: [PATCH 2/2] staging: i3c: add Realtek RTS490x I3C HUB driver   Greg KH
• [PATCH] i3c: Consistently define pci_device_ids using named initializers   Uwe Kleine-König (The Capable Hub)
  • [PATCH] i3c: Consistently define pci_device_ids using named initializers   Frank Li
    • [PATCH] i3c: Consistently define pci_device_ids using named initializers   Uwe Kleine-König (The Capable Hub)
    • [PATCH] i3c: Consistently define pci_device_ids using named initializers   Frank Li
  • [PATCH] i3c: Consistently define pci_device_ids using named initializers   Adrian Hunter
• [PATCH v5 0/5] Add microchip sama7d65 SoC I3C support   Manikandan Muralidharan
  • [PATCH v5 1/5] dt-bindings: i3c: mipi-i3c-hci: add Microchip SAMA7D65 compatible   Manikandan Muralidharan
    • [PATCH v5 1/5] dt-bindings: i3c: mipi-i3c-hci: add Microchip SAMA7D65 compatible   Conor Dooley
  • [PATCH v5 2/5] clk: at91: sama7d65: add peripheral clock for I3C   Manikandan Muralidharan
  • [PATCH v5 3/5] i3c: mipi-i3c-hci: add microchip sama7d65 SoC compatible with the required quirk   Manikandan Muralidharan
    • [PATCH v5 3/5] i3c: mipi-i3c-hci: add microchip sama7d65 SoC compatible with the required quirk   Adrian Hunter
  • [PATCH v5 4/5] ARM: dts: microchip: add I3C controller   Manikandan Muralidharan
  • [PATCH v5 5/5] ARM: configs: at91: sama7: add sama7d65 i3c-hci   Manikandan Muralidharan
• [PATCH v9 3/7] dt-bindings: i3c: Add NXP P3H2x4x i3c-hub support   Rob Herring (Arm)
• [PATCH v6 0/5] Add microchip sama7d65 SoC I3C support   Manikandan Muralidharan
  • [PATCH v6 1/5] dt-bindings: i3c: mipi-i3c-hci: add Microchip SAMA7D65 compatible   Manikandan Muralidharan
    • [PATCH v6 1/5] dt-bindings: i3c: mipi-i3c-hci: add Microchip SAMA7D65 compatible   Frank Li
  • [PATCH v6 2/5] clk: at91: sama7d65: add peripheral clock for I3C   Manikandan Muralidharan
    • [PATCH v6 2/5] clk: at91: sama7d65: add peripheral clock for I3C   Claudiu Beznea
  • [PATCH v6 3/5] i3c: mipi-i3c-hci: add microchip sama7d65 SoC compatible with the required quirk   Manikandan Muralidharan
    • [PATCH v6 3/5] i3c: mipi-i3c-hci: add microchip sama7d65 SoC compatible with the required quirk   Frank Li
  • [PATCH v6 4/5] ARM: dts: microchip: add I3C controller   Manikandan Muralidharan
    • [PATCH v6 4/5] ARM: dts: microchip: add I3C controller   Claudiu Beznea
      • [PATCH v6 4/5] ARM: dts: microchip: add I3C controller   Manikandan.M at microchip.com
      • [PATCH v6 4/5] ARM: dts: microchip: add I3C controller   Nicolas Ferre
  • [PATCH v6 5/5] ARM: configs: at91: sama7: add sama7d65 i3c-hci   Manikandan Muralidharan
    • [PATCH v6 5/5] ARM: configs: at91: sama7: add sama7d65 i3c-hci   Claudiu Beznea
• [PATCH v2 0/3] i3c: dw: Add apb reset support   Jisheng Zhang
  • [PATCH v2 1/3] dt-bindings: i3c: dw: Describe core reset   Jisheng Zhang
    • [PATCH v2 1/3] dt-bindings: i3c: dw: Describe core reset   Frank Li
  • [PATCH v2 2/3] dt-bindings: i3c: dw: Add apb reset   Jisheng Zhang
    • [PATCH v2 2/3] dt-bindings: i3c: dw: Add apb reset   Conor Dooley
      • [PATCH v2 2/3] dt-bindings: i3c: dw: Add apb reset   Krzysztof Kozlowski
      • [PATCH v2 2/3] dt-bindings: i3c: dw: Add apb reset   Conor Dooley
  • [PATCH v2 3/3] i3c: dw: Add apb reset support   Jisheng Zhang
  • [EXT] [PATCH v2 0/3] i3c: dw: Add apb reset support   Frank Li
• [PATCH 0/8] i3c: Hot-Join improvements and MIPI HCI Hot-Join support   Adrian Hunter
  • [PATCH 2/8] i3c: master: Serialize i3c_set_hotjoin() with the maintenance lock   Adrian Hunter
    • [PATCH 2/8] i3c: master: Serialize i3c_set_hotjoin() with the maintenance lock   Frank Li
      • [PATCH 2/8] i3c: master: Serialize i3c_set_hotjoin() with the maintenance lock   David Nyström
      • [PATCH 2/8] i3c: master: Serialize i3c_set_hotjoin() with the maintenance lock   Adrian Hunter
      • [PATCH 2/8] i3c: master: Serialize i3c_set_hotjoin() with the maintenance lock   David Nyström
      • [PATCH 2/8] i3c: master: Serialize i3c_set_hotjoin() with the maintenance lock   Adrian Hunter
  • [PATCH 3/8] i3c: master: Consolidate Hot-Join DAA work in the core   Adrian Hunter
    • [PATCH 3/8] i3c: master: Consolidate Hot-Join DAA work in the core   Frank Li
  • [PATCH 4/8] i3c: master: Ensure Hot-Join operations are stopped on shutdown   Adrian Hunter
    • [PATCH 4/8] i3c: master: Ensure Hot-Join operations are stopped on shutdown   Frank Li
      • [PATCH 4/8] i3c: master: Ensure Hot-Join operations are stopped on shutdown   Adrian Hunter
      • [PATCH 4/8] i3c: master: Ensure Hot-Join operations are stopped on shutdown   Frank Li
  • [PATCH 5/8] i3c: dw: Drop redundant Hot-Join cancel_work_sync() in shutdown   Adrian Hunter
    • [PATCH 5/8] i3c: dw: Drop redundant Hot-Join cancel_work_sync() in shutdown   Frank Li
  • [PATCH 6/8] i3c: master: Defer new-device registration out of DAA caller context   Adrian Hunter
    • [PATCH 6/8] i3c: master: Defer new-device registration out of DAA caller context   Frank Li
      • [PATCH 6/8] i3c: master: Defer new-device registration out of DAA caller context   Adrian Hunter
      • [PATCH 6/8] i3c: master: Defer new-device registration out of DAA caller context   David Nyström
      • [PATCH 6/8] i3c: master: Defer new-device registration out of DAA caller context   Adrian Hunter
      • [PATCH 6/8] i3c: master: Defer new-device registration out of DAA caller context   Frank Li
      • [PATCH 6/8] i3c: master: Defer new-device registration out of DAA caller context   Adrian Hunter
      • [PATCH 6/8] i3c: master: Defer new-device registration out of DAA caller context   Frank Li
      • [PATCH 6/8] i3c: master: Defer new-device registration out of DAA caller context   Adrian Hunter
      • [PATCH 6/8] i3c: master: Defer new-device registration out of DAA caller context   Frank Li
      • [PATCH 6/8] i3c: master: Defer new-device registration out of DAA caller context   Adrian Hunter
  • [PATCH 7/8] i3c: master: Export i3c_master_enec_disec_locked()   Adrian Hunter
    • [PATCH 7/8] i3c: master: Export i3c_master_enec_disec_locked()   Frank Li
  • [PATCH 8/8] i3c: mipi-i3c-hci: Add Hot-Join support   Adrian Hunter
    • [PATCH 8/8] i3c: mipi-i3c-hci: Add Hot-Join support   Frank Li
• [PATCH 1/8] i3c: master: Make hot-join workqueue freezable to block hot-join during suspend   Adrian Hunter
  • [PATCH 1/8] i3c: master: Make hot-join workqueue freezable to block hot-join during suspend   Frank Li
• [RFC PATCH] i3c: dw: add DMA support for data transfers   Haoyu Lu
  • [RFC PATCH] i3c: dw: add DMA support for data transfers   Frank Li
• [PATCH V4 00/17] i3c: mipi-i3c-hci: DMA abort, recovery and related improvements   Adrian Hunter
  • [PATCH V4 03/17] i3c: mipi-i3c-hci: Prevent DMA enqueue while ring is aborting or in error   Adrian Hunter
  • [PATCH V4 04/17] i3c: mipi-i3c-hci: Wait for DMA ring restart to complete   Adrian Hunter
  • [PATCH V4 05/17] i3c: mipi-i3c-hci: Move hci_dma_xfer_done() definition   Adrian Hunter
  • [PATCH V4 06/17] i3c: mipi-i3c-hci: Call hci_dma_xfer_done() from dequeue path   Adrian Hunter
  • [PATCH V4 07/17] i3c: mipi-i3c-hci: Complete transfer lists immediately on error   Adrian Hunter
  • [PATCH V4 08/17] i3c: mipi-i3c-hci: Avoid restarting DMA ring after aborting wrong transfer   Adrian Hunter
  • [PATCH V4 09/17] i3c: mipi-i3c-hci: Add DMA ring abort/reset quirk for Intel controllers   Adrian Hunter
  • [PATCH V4 10/17] i3c: mipi-i3c-hci: Factor out hci_dma_abort()   Adrian Hunter
  • [PATCH V4 11/17] i3c: mipi-i3c-hci: Add DMA ring abort quirk for Intel controllers   Adrian Hunter
  • [PATCH V4 12/17] i3c: mipi-i3c-hci: Factor out reset-and-restore helper   Adrian Hunter
  • [PATCH V4 13/17] i3c: mipi-i3c-hci: Add DMA-mode recovery for internal controller errors   Adrian Hunter
  • [PATCH V4 14/17] i3c: mipi-i3c-hci: Wait for NoOp commands to complete   Adrian Hunter
  • [PATCH V4 15/17] i3c: mipi-i3c-hci: Base timeouts on actual transfer start time   Adrian Hunter
  • [PATCH V4 16/17] i3c: mipi-i3c-hci: Consolidate DMA ring allocation   Adrian Hunter
  • [PATCH V4 17/17] i3c: mipi-i3c-hci: Increase DMA transfer ring size to maximum   Adrian Hunter
• [PATCH V4 01/17] i3c: mipi-i3c-hci: Fix suspend behavior when bus disable falls back to software reset   Adrian Hunter
• [PATCH V4 02/17] i3c: mipi-i3c-hci: Preserve RUN bit when aborting DMA ring   Adrian Hunter
• [PATCH V2 0/8] i3c: Hot-Join improvements and MIPI HCI Hot-Join support   Adrian Hunter
  • [PATCH V2 1/8] i3c: master: Make hot-join workqueue freezable to block hot-join during suspend   Adrian Hunter
  • [PATCH V2 2/8] i3c: master: Serialize i3c_set_hotjoin() with the maintenance lock   Adrian Hunter
  • [PATCH V2 3/8] i3c: master: Consolidate Hot-Join DAA work in the core   Adrian Hunter
  • [PATCH V2 4/8] i3c: master: Ensure Hot-Join operations are stopped on shutdown   Adrian Hunter
  • [PATCH V2 5/8] i3c: dw: Drop redundant Hot-Join cancel_work_sync() in shutdown   Adrian Hunter
  • [PATCH V2 6/8] i3c: master: Defer new-device registration out of DAA caller context   Adrian Hunter
  • [PATCH V2 7/8] i3c: master: Export i3c_master_enec_disec_locked()   Adrian Hunter
  • [PATCH V2 8/8] i3c: mipi-i3c-hci: Add Hot-Join support   Adrian Hunter
• [PATCH v3 0/4] i3c: dw: Add apb reset support   Jisheng Zhang
  • [PATCH v3 1/4] i3c: dw: Remove core reset "_rst" suffix   Jisheng Zhang
    • [PATCH v3 1/4] i3c: dw: Remove core reset "_rst" suffix   Krzysztof Kozlowski
      • [PATCH v3 1/4] i3c: dw: Remove core reset "_rst" suffix   Jisheng Zhang
      • [PATCH v3 1/4] i3c: dw: Remove core reset "_rst" suffix   Krzysztof Kozlowski
  • [PATCH v3 2/4] dt-bindings: i3c: dw: Describe core reset   Jisheng Zhang
    • [PATCH v3 2/4] dt-bindings: i3c: dw: Describe core reset   Krzysztof Kozlowski
      • [PATCH v3 2/4] dt-bindings: i3c: dw: Describe core reset   Jisheng Zhang
  • [PATCH v3 3/4] dt-bindings: i3c: dw: Add apb reset   Jisheng Zhang
  • [PATCH v3 4/4] i3c: dw: Add apb reset support   Jisheng Zhang
• [PATCH 00/17] i3c: renesas: Suspend to RAM with power loss and runtime PM   Claudiu Beznea
  • [PATCH 01/17] i3c: renesas: Check that the transfer is valid before accessing it   Claudiu Beznea
    • [PATCH 01/17] i3c: renesas: Check that the transfer is valid before accessing it   Frank Li
  • [PATCH 02/17] i3c: renesas: Use the divider 128   Claudiu Beznea
    • [PATCH 02/17] i3c: renesas: Use the divider 128   Frank Li
      • [PATCH 02/17] i3c: renesas: Use the divider 128   Claudiu Beznea
  • [PATCH 03/17] i3c: renesas: Restore STDBR and EXTBR registers on resume   Claudiu Beznea
    • [PATCH 03/17] i3c: renesas: Restore STDBR and EXTBR registers on resume   Frank Li
      • [PATCH 03/17] i3c: renesas: Restore STDBR and EXTBR registers on resume   Claudiu Beznea
      • [PATCH 03/17] i3c: renesas: Restore STDBR and EXTBR registers on resume   Frank Li
  • [PATCH 04/17] i3c: renesas: Follow the reset deassert order used in probe   Claudiu Beznea
    • [PATCH 04/17] i3c: renesas: Follow the reset deassert order used in probe   Frank Li
  • [PATCH 05/17] i3c: renesas: Fix re-attach   Claudiu Beznea
    • [PATCH 05/17] i3c: renesas: Fix re-attach   Frank Li
  • [PATCH 06/17] i3c: renesas: Reset the controller on resume   Claudiu Beznea
    • [PATCH 06/17] i3c: renesas: Reset the controller on resume   Frank Li
      • [PATCH 06/17] i3c: renesas: Reset the controller on resume   Claudiu Beznea
  • [PATCH 07/17] i3c: renesas: Perform Dynamic Address Assignment on resume   Claudiu Beznea
    • [PATCH 07/17] i3c: renesas: Perform Dynamic Address Assignment on resume   Frank Li
      • [PATCH 07/17] i3c: renesas: Perform Dynamic Address Assignment on resume   Claudiu Beznea
  • [PATCH 08/17] i3c: renesas: Clean DATBAS register on detach   Claudiu Beznea
    • [PATCH 08/17] i3c: renesas: Clean DATBAS register on detach   Frank Li
  • [PATCH 09/17] i3c: renesas: Use reset_control_bulk_{assert, deassert}()   Claudiu Beznea
    • [PATCH 09/17] i3c: renesas: Use reset_control_bulk_{assert, deassert}()   Frank Li
      • [PATCH 09/17] i3c: renesas: Use reset_control_bulk_{assert, deassert}()   Claudiu Beznea
  • [PATCH 10/17] i3c: renesas: Return immediately if there is nothing to transfer   Claudiu Beznea
    • [PATCH 10/17] i3c: renesas: Return immediately if there is nothing to transfer   Frank Li
  • [PATCH 11/17] i3c: renesas: Follow a unified pattern for transfer and command initialization   Claudiu Beznea
    • [PATCH 11/17] i3c: renesas: Follow a unified pattern for transfer and command initialization   Frank Li
  • [PATCH 12/17] i3c: renesas: Drop the explicit memset() call   Claudiu Beznea
    • [PATCH 12/17] i3c: renesas: Drop the explicit memset() call   Frank Li
  • [PATCH 13/17] i3c: renesas: Update HW registers after SW computations are done   Claudiu Beznea
    • [PATCH 13/17] i3c: renesas: Update HW registers after SW computations are done   Frank Li
  • [PATCH 14/17] i3c: renesas: Organize structures to avoid unnecessary padding   Claudiu Beznea
    • [PATCH 14/17] i3c: renesas: Organize structures to avoid unnecessary padding   Frank Li
  • [PATCH 15/17] i3c: renesas: Use the "dev_name:irq_name" format for the interrupt name   Claudiu Beznea
    • [PATCH 15/17] i3c: renesas: Use the "dev_name:irq_name" format for the interrupt name   Frank Li
  • [PATCH 16/17] i3c: renesas: Drop unnecessary tab   Claudiu Beznea
    • [PATCH 16/17] i3c: renesas: Drop unnecessary tab   Frank Li
  • [PATCH 17/17] i3c: renesas: Add runtime PM support   Claudiu Beznea
    • [PATCH 17/17] i3c: renesas: Add runtime PM support   Frank Li
      • [PATCH 17/17] i3c: renesas: Add runtime PM support   Claudiu Beznea
• [RFC] mipi-i3c-hci: Support for DMA Ring Pipelining / High-throughput Streaming   Sam Agazaryan
  • [RFC] mipi-i3c-hci: Support for DMA Ring Pipelining / High-throughput Streaming   Frank Li
• [PATCH v10 0/9] Add support for NXP P3H2x4x I3C hub driver   Lakshay Piplani
  • [PATCH v10 1/9] i3c: master: rename i3c_master_reattach_i3c_dev() to *_locked   Lakshay Piplani
  • [PATCH v10 2/9] i3c: master: Expose the APIs to support I3C hub   Lakshay Piplani
  • [PATCH v10 3/9] i3c: master: Add APIs for I3C hub support   Lakshay Piplani
  • [PATCH v10 4/9] dt-bindings: i3c: Add NXP P3H2x4x i3c-hub support   Lakshay Piplani
  • [PATCH v10 5/9] mfd: p3h2x4x: Add driver for NXP P3H2x4x i3c hub and on-die regulator   Lakshay Piplani
  • [PATCH v10 6/9] regulator: p3h2x4x: Add driver for on-die regulators in NXP P3H2x4x i3c hub   Lakshay Piplani
    • [PATCH v10 6/9] regulator: p3h2x4x: Add driver for on-die regulators in NXP P3H2x4x i3c hub   Mark Brown
  • [PATCH v10 7/9] i3c: hub: Add support for the I3C interface in the I3C hub   Lakshay Piplani
  • [PATCH v10 8/9] i3c: hub: p3h2x4x: Add support for NXP P3H2x4x I3C hub functionality   Lakshay Piplani
  • [PATCH v10 9/9] i3c: hub: p3h2x4x: Add SMBus slave mode support   Lakshay Piplani
• [PATCH v7 0/5] Add microchip sama7d65 SoC I3C support   Manikandan Muralidharan
  • [PATCH v7 1/5] dt-bindings: i3c: mipi-i3c-hci: add Microchip SAMA7D65 compatible   Manikandan Muralidharan
  • [PATCH v7 2/5] clk: at91: sama7d65: add peripheral clock for I3C   Manikandan Muralidharan
    • [PATCH v7 2/5] clk: at91: sama7d65: add peripheral clock for I3C   Claudiu Beznea
  • [PATCH v7 3/5] i3c: mipi-i3c-hci: add microchip sama7d65 SoC compatible with the required quirk   Manikandan Muralidharan
  • [PATCH v7 4/5] ARM: dts: microchip: add I3C controller   Manikandan Muralidharan
  • [PATCH v7 5/5] ARM: configs: at91: sama7: add sama7d65 i3c-hci   Manikandan Muralidharan
• [PATCH v2 1/2] dt-bindings: i3c: add Realtek RTS490x I3C HUB   zain_zhou at realsil.com.cn
  • [PATCH v2 2/2] staging: i3c: add Realtek RTS490x I3C HUB driver   zain_zhou at realsil.com.cn
    • [PATCH v2 2/2] staging: i3c: add Realtek RTS490x I3C HUB driver   Alexandre Belloni
    • [PATCH v2 2/2] staging: i3c: add Realtek RTS490x I3C HUB driver   Krzysztof Kozlowski
    • [PATCH v2 2/2] staging: i3c: add Realtek RTS490x I3C HUB driver   Greg KH
  • [PATCH v2 1/2] dt-bindings: i3c: add Realtek RTS490x I3C HUB   Krzysztof Kozlowski
  • [PATCH v2 1/2] dt-bindings: i3c: add Realtek RTS490x I3C HUB   Rob Herring (Arm)
• [PATCH v4 0/3] i3c: dw: Add apb reset support   Jisheng Zhang
  • [PATCH v4 1/3] dt-bindings: i3c: dw: Describe core reset   Jisheng Zhang
    • [PATCH v4 1/3] dt-bindings: i3c: dw: Describe core reset   Krzysztof Kozlowski
  • [PATCH v4 2/3] dt-bindings: i3c: dw: Add apb reset   Jisheng Zhang
    • [PATCH v4 2/3] dt-bindings: i3c: dw: Add apb reset   Krzysztof Kozlowski
      • [PATCH v4 2/3] dt-bindings: i3c: dw: Add apb reset   Jisheng Zhang
      • [PATCH v4 2/3] dt-bindings: i3c: dw: Add apb reset   Krzysztof Kozlowski
      • [PATCH v4 2/3] dt-bindings: i3c: dw: Add apb reset   Jisheng Zhang
  • [PATCH v4 3/3] i3c: dw: Add apb reset support   Jisheng Zhang
• [PATCH 6.12.y] i3c: mipi-i3c-hci: Correct RING_CTRL_ABORT handling in DMA dequeue   Jianqiang kang
  • [PATCH 6.12.y] i3c: mipi-i3c-hci: Correct RING_CTRL_ABORT handling in DMA dequeue   Sasha Levin
• [PATCH 6.6.y] i3c: mipi-i3c-hci: Correct RING_CTRL_ABORT handling in DMA dequeue   Jianqiang kang
• [PATCH 6.1.y] i3c: mipi-i3c-hci: Correct RING_CTRL_ABORT handling in DMA dequeue   Jianqiang kang
• [PATCH 5.15.y] i3c: mipi-i3c-hci: Correct RING_CTRL_ABORT handling in DMA dequeue   Jianqiang kang
• [PATCH 0/7] i3c: Fix IBI race, address handling, and reconcile DAA   Adrian Hunter
  • [PATCH 2/7] i3c: mipi-i3c-hci: Ignore DISEC failures when disabling IBIs   Adrian Hunter
  • [PATCH 3/7] i3c: master: Prevent reuse of dynamic address on device add failure   Adrian Hunter
  • [PATCH 4/7] i3c: mipi-i3c-hci: Tolerate i3c_master_add_i3c_dev_locked() failures in DAA   Adrian Hunter
  • [PATCH 5/7] i3c: master: Make i3c_master_add_i3c_dev_locked() return void   Adrian Hunter
  • [PATCH 6/7] i3c: master: Move DAA API functions after i3c_master_add_i3c_dev_locked()   Adrian Hunter
  • [PATCH 7/7] i3c: master: Reconcile dynamic addresses after DAA   Adrian Hunter
• [PATCH 1/7] i3c: mipi-i3c-hci: Fix race in i3c_hci_addr_to_dev()   Adrian Hunter
• [PATCHv2 1/2] dt-bindings: i3c: dw: add resets and reset-names   Dinh Nguyen
  • [PATCHv2 1/2] dt-bindings: i3c: dw: add resets and reset-names   Krzysztof Kozlowski
• [PATCHv2 2/2] arm64: dts: socfpga: agilex5: popuplate reset properties for I3C   Dinh Nguyen

Last message date: Sun May 31 07:50:54 PDT 2026
Archived on: Sun Jun 14 13:09:58 PDT 2026

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...