[PATCH v6 4/5] ARM: dts: microchip: add I3C controller

[Manikandan.M at microchip.com]

Hi Claudiu,

On 16/05/26 9:37 pm, Claudiu Beznea wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know 
> the content is safe
> 
> Hi, Manikandan,
> 
> On 5/7/26 11:48, Manikandan Muralidharan wrote:
>> From: Durai Manickam KR <durai.manickamkr at microchip.com>
>>
>> Add I3C controller for sama7d65 SoC.
>>
>> Signed-off-by: Durai Manickam KR <durai.manickamkr at microchip.com>
>> Signed-off-by: Manikandan Muralidharan <manikandan.m at microchip.com>
>> ---
>> Changes in v3:
>> - Remove clock-names property as driver enables the clk in bulk
>>
>>   arch/arm/boot/dts/microchip/sama7d65.dtsi | 8 ++++++++
>>   1 file changed, 8 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/microchip/sama7d65.dtsi 
>> b/arch/arm/boot/dts/microchip/sama7d65.dtsi
>> index 67253bbc08df..ec200848c153 100644
>> --- a/arch/arm/boot/dts/microchip/sama7d65.dtsi
>> +++ b/arch/arm/boot/dts/microchip/sama7d65.dtsi
>> @@ -1055,5 +1055,13 @@ gic: interrupt-controller at e8c11000 {
>>                       #address-cells = <0>;
>>                       interrupt-controller;
>>               };
>> +
>> +             i3c: i3c at e9000000 {
>> +                     compatible = "microchip,sama7d65-i3c-hci";
>> +                     reg = <0xe9000000 0x300>;
> 
>  From manual at [1] I see the size of I3CC region is 0x1000. Unless that is
> wrong I think we should use 0x1000 to properly describe de HW. Please 
> let me
> know and I can do it while applying.
> 

According to Table 78.6 (Register Summary), the I3CC register space 
extends up to offset 0x258, Ideally the mapping should have been 0x400 
(next power of 2 considering the memory region alignment), using 0x1000 
is also acceptable. Please advise which value is preferred.

> Thank you,
> Claudiu
> 
> [1]
> https://ww1.microchip.com/downloads/aemDocuments/documents/MPU32/ProductDocuments/DataSheets/SAMA7D6-Series-Data-Sheet-DS60001851.pdf
> 
>> +                     interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 105>, <&pmc 
>> PMC_TYPE_GCK 105>;
>> +                     status = "disabled";
>> +             };
>>       };
>>   };
> 

-- 
Thanks and Regards,
Manikandan M.