December 2015 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Tue Dec 1 00:25:30 PST 2015
Ending: Thu Dec 31 21:58:38 PST 2015
Messages: 216

• [PATCH] driver: make all dev_request_mem_region_* routines MIPS compatible   Sascha Hauer
• [PATCH v2] defaultenv: boot/net: Boot initramfs from tftp if present   Sascha Hauer
• [PATCH] environment: support env on at24 eeprom   Sascha Hauer
• i.MX6 PCIe support   Lucas Stach
  • i.MX6 PCIe support   Andrey Smirnov
    • i.MX6 PCIe support   Lucas Stach
      • i.MX6 PCIe support   Andrey Smirnov
• [PATCH 1/3] imx35: register usb-misc by default   Florian Vallee
  • [PATCH 2/3] eukrea-cpuimx35: setup usb through chipidea-imx driver   Florian Vallee
  • [PATCH 3/3] eukrea-cpuimx35: update defconfig   Florian Vallee
  • [PATCH 1/3] imx35: register usb-misc by default   Sascha Hauer
• [PATCH] GPIO: add Microchip MCP23017 / MCP23008 GPIO driver   Florian Vallee
  • [PATCH] GPIO: add Microchip MCP23017 / MCP23008 GPIO driver   Sascha Hauer
• [RFC 0/2] imx_adc command for barebox   Florian Vallee
  • [RFC 1/2] drivers: imx_adc: import and adapt imx_adc from linux   Florian Vallee
  • [RFC 2/2] drivers: imx_adc: repurpose driver as pure ADC   Florian Vallee
  • [RFC 0/2] imx_adc command for barebox   Sascha Hauer
• [PATCH 0/9] RAMOOPS read support for Barebox   Markus Pargmann
  • [PATCH 1/9] arm: boards: karo-tx6x remove definition of DIV_ROUND_UP   Markus Pargmann
  • [PATCH 2/9] log2: Add missing __rounddown_pow_of_two()   Markus Pargmann
  • [PATCH 5/9] lib: Import reed solomon code from kernel   Markus Pargmann
    • [PATCH 5/9] lib: Import reed solomon code from kernel   Sascha Hauer
      • [PATCH 5/9] lib: Import reed solomon code from kernel   Markus Pargmann
  • [PATCH 6/9] arm: Clarify memory layout calculation   Markus Pargmann
    • [PATCH 6/9] arm: Clarify memory layout calculation   Sascha Hauer
  • [PATCH 7/9] arm: start: Add visible sdram region for barebox board data   Markus Pargmann
  • [PATCH 9/9] fs: Add pstore filesystem   Markus Pargmann
    • [PATCH 9/9] fs: Add pstore filesystem   Antony Pavlov
      • [PATCH 9/9] fs: Add pstore filesystem   Markus Pargmann
• [PATCH 3/9] printk: Add missing include/declaration   Markus Pargmann
• [PATCH 4/9] vsprintf: Add scnprintf from kernel   Markus Pargmann
• [PATCH 8/9] arm: Add RAMOOPS memory area   Markus Pargmann
  • [PATCH 8/9] arm: Add RAMOOPS memory area   Sascha Hauer
    • [PATCH 8/9] arm: Add RAMOOPS memory area   Markus Pargmann
      • [PATCH 8/9] arm: Add RAMOOPS memory area   Sascha Hauer
• [PATCH] ARM: Remove kernel booting call for thumb2 mode   Trent Piepho
  • [PATCH] ARM: Remove kernel booting call for thumb2 mode   Trent Piepho
    • [PATCH] ARM: Remove kernel booting call for thumb2 mode   Sascha Hauer
      • [PATCH] ARM: Remove kernel booting call for thumb2 mode   Trent Piepho
  • [PATCH] ARM: Remove kernel booting call for thumb2 mode   Sascha Hauer
• [PATCH 0/2] net: tap: trivial fixes   Antony Pavlov
  • [PATCH 1/2] net: tap: make locally used functions static   Antony Pavlov
  • [PATCH 2/2] net: tap: fix whitespaces   Antony Pavlov
  • [PATCH 0/2] net: tap: trivial fixes   Sascha Hauer
• [PATCH] ARM: Remove do_execute and thumb2_execute   Trent Piepho
  • [PATCH] ARM: Remove do_execute and thumb2_execute   Sascha Hauer
• [PATCH] net: smc1111: fix ethernet mac setting   Robert Jarzmik
  • [PATCH] net: smc1111: fix ethernet mac setting   Sam Ravnborg
  • [PATCH] net: smc1111: fix ethernet mac setting   Sascha Hauer
• [PATCH] ARM: pxa: pxa2xx use PSPR for resume address   Robert Jarzmik
  • [PATCH] ARM: pxa: pxa2xx use PSPR for resume address   Sascha Hauer
• [RFC 3/9] MIPS: add virt_to_phys() and phys_to_virt()   Antony Pavlov
  • [RFC 3/9] MIPS: add virt_to_phys() and phys_to_virt()   Sascha Hauer
    • [RFC 3/9] MIPS: add virt_to_phys() and phys_to_virt()   Antony Pavlov
    • [RFC 3/9] MIPS: add virt_to_phys() and phys_to_virt()   Peter Mamonov
      • [RFC 3/9] MIPS: add virt_to_phys() and phys_to_virt()   Sascha Hauer
• [PATCH 1/7] imx: ocotp: Add code to initialize 'cdev->device_node'   Andrey Smirnov
  • [PATCH 2/7] drivers: bus: Match against id_table first   Andrey Smirnov
  • [PATCH 3/7] i2c: Port two utility functions from Linux kernel   Andrey Smirnov
  • [PATCH 4/7] drivers: Introduce hardware monitoring subsystem   Andrey Smirnov
  • [PATCH 5/7] commands: Add 'hwmon' command   Andrey Smirnov
    • [PATCH 5/7] commands: Add 'hwmon' command   Antony Pavlov
  • [PATCH 6/7] hwmon: Port Linux driver for LM75 sensor   Andrey Smirnov
  • [PATCH 7/7] hwmon: Port TEMPMON sensor driver   Andrey Smirnov
    • [PATCH 7/7] hwmon: Port TEMPMON sensor driver   Trent Piepho
      • [PATCH 7/7] hwmon: Port TEMPMON sensor driver   Andrey Smirnov
      • [PATCH 7/7] hwmon: Port TEMPMON sensor driver   Trent Piepho
      • [PATCH 7/7] hwmon: Port TEMPMON sensor driver   Andrey Smirnov
  • [PATCH 1/7] imx: ocotp: Add code to initialize 'cdev->device_node'   Sascha Hauer
    • [PATCH 1/7] imx: ocotp: Add code to initialize 'cdev->device_node'   Andrey Smirnov
• am335x: MLO and Barebox   Yegor Yefremov
  • am335x: MLO and Barebox   Teresa Remmet
• v2015.12.0   Sascha Hauer
• [RFC] iodevice support   Sascha Hauer
  • [PATCH 2/4] misc: Add basic LM75 temperature driver   Sascha Hauer
  • [PATCH 3/4] misc: Add Microchip MCP342x support   Sascha Hauer
  • [PATCH 4/4] misc: Add PT100 temperature sensor support   Sascha Hauer
  • [RFC] iodevice support   Andrey Smirnov
    • [RFC] iodevice support   Sascha Hauer
• [PATCH 1/4] misc: Add iodevice support   Sascha Hauer
  • [PATCH 1/4] misc: Add iodevice support   Trent Piepho
    • [PATCH 1/4] misc: Add iodevice support   Sascha Hauer
• [PATCH v2 0/9] RAMOOPS read support for Barebox   Markus Pargmann
  • [PATCH v2 1/9] arm: boards: karo-tx6x remove definition of DIV_ROUND_UP   Markus Pargmann
  • [PATCH v2 3/9] printk: Add missing include/declaration   Markus Pargmann
  • [PATCH v2 4/9] vsprintf: Add scnprintf from kernel   Markus Pargmann
  • [PATCH v2 5/9] lib: Import reed solomon code from kernel   Markus Pargmann
  • [PATCH v2 6/9] arm: Clarify memory layout calculation   Markus Pargmann
  • [PATCH v2 7/9] arm: start: Add visible sdram region for barebox board data   Markus Pargmann
  • [PATCH v2 8/9] arm: Add RAMOOPS memory area   Markus Pargmann
  • [PATCH v2 9/9] fs: Add pstore filesystem   Markus Pargmann
    • [PATCH v2 9/9] fs: Add pstore filesystem   Antony Pavlov
      • [PATCH v2 9/9] fs: Add pstore filesystem   Markus Pargmann
  • [PATCH v2 0/9] RAMOOPS read support for Barebox   Sascha Hauer
• [PATCH v2 2/9] log2: Add missing __rounddown_pow_of_two()   Markus Pargmann
• Messed up commit in master   Lucas Stach
  • Messed up commit in master   Sascha Hauer
• [PATCH 1/2] ARM: ccxmx53: properly guard initcall for multiimage   Lucas Stach
  • [PATCH 2/2] MCI: init device_node for MCI mainarea cdev   Lucas Stach
  • [PATCH 1/2] ARM: ccxmx53: properly guard initcall for multiimage   Sascha Hauer
• Your ticket order #00400977 approved   America Airlines
• [PATCH 1/2] partitions: UUID was missing from partitions by name   Trent Piepho
  • [PATCH 2/2] partitions/efi: Add partuuid to partition description   Trent Piepho
    • [PATCH 2/2 v2] partitions/efi: Add partuuid to partition description   Trent Piepho
  • [PATCH 1/2] partitions: UUID was missing from partitions by name   Sascha Hauer
• Fix some gcc5 warnings   Sascha Hauer
  • [PATCH 1/3] ubiformat: fix the subpage size hint on the error path   Sascha Hauer
  • [PATCH 2/3] linux/barebox-wrapper: Silence gcc5 warning   Sascha Hauer
    • [PATCH 2/3] linux/barebox-wrapper: Silence gcc5 warning   Trent Piepho
      • [PATCH 2/3] linux/barebox-wrapper: Silence gcc5 warning   Sascha Hauer
  • [PATCH 3/3] ARM: Omap3: Remove useless inline   Sascha Hauer
• "make distclean" leaves a pile of arch/arm/dts/*.lzo files   Robert P. J. Day
  • "make distclean" leaves a pile of arch/arm/dts/*.lzo files   Sascha Hauer
    • "make distclean" leaves a pile of arch/arm/dts/*.lzo files   Robert P. J. Day
• [PATCH] Documentation: Document pstore/RAMOOPS   Markus Pargmann
  • [PATCH] Documentation: Document pstore/RAMOOPS   Sascha Hauer
• [PATCH] ARM: i.MX6Q: Embedsky E9: Convert environment paths in DTS to a new bindings   Andrey Panov
  • [PATCH] ARM: i.MX6Q: Embedsky E9: Convert environment paths in DTS to a new bindings   Sascha Hauer
• [PATCH] bootstrap: Boot barebox with kernel calling convention   Trent Piepho
  • [PATCH] bootstrap: Boot barebox with kernel calling convention   Sascha Hauer
  • [PATCH] bootstrap: Boot barebox with kernel calling convention   Sascha Hauer
• [PATCH] bootstrap: constify strings   Trent Piepho
  • [PATCH] bootstrap: constify strings   Sascha Hauer
• [PATCH] socfpga: Allow setting partition xloader boots from for mmc   Trent Piepho
  • [PATCH] socfpga: Allow setting partition xloader boots from for mmc   Sascha Hauer
    • [PATCH] socfpga: Allow setting partition xloader boots from for mmc   Trent Piepho
  • [PATCH] socfpga: Allow setting partition xloader boots from for mmc   Sascha Hauer
• [PATCH v2 1/8] of_path: of_find_path() factor out device detection logic into separate function   Trent Piepho
  • [PATCH] of_path: Fix bug with partitions, simply code   Trent Piepho
    • [PATCH] of_path: Fix bug with partitions, simply code   Sascha Hauer
      • [PATCH] of_path: Fix bug with partitions, simply code   Trent Piepho
    • [PATCH] of_path: Fix bug with partitions, simply code   Sascha Hauer
• [PATCH] cdev: When creating a new cdev, initialize device_node   Trent Piepho
  • [PATCH] cdev: When creating a new cdev, initialize device_node   Sascha Hauer
• [PATCH] socfpga: Find partition with environment via device tree   Trent Piepho
  • [PATCH] socfpga: Find partition with environment via device tree   Sascha Hauer
    • [PATCH] socfpga: Find partition with environment via device tree   Trent Piepho
      • [PATCH] socfpga: Find partition with environment via device tree   Sascha Hauer
      • [PATCH] socfpga: Find partition with environment via device tree   Trent Piepho
      • [PATCH] socfpga: Find partition with environment via device tree   Sascha Hauer
• [PATCH 1/2] devfs: Add symlink support   Sascha Hauer
  • [PATCH 2/2] partition: Create links with partition names   Sascha Hauer
    • [PATCH 2/2] partition: Create links with partition names   Trent Piepho
      • [PATCH 2/2] partition: Create links with partition names   Sascha Hauer
      • [PATCH 2/2] partition: Create links with partition names   Trent Piepho
• [PATCH 1/2] environment: Support env from file in a file-system via device tree   Trent Piepho
  • [PATCH 1/2] environment: Support env from file in a file-system via device tree   Trent Piepho
    • [PATCH 1/2] environment: Support env from file in a file-system via device tree   Sascha Hauer
      • [PATCH 1/2] environment: Support env from file in a file-system via device tree   Trent Piepho
      • [PATCH 1/2] environment: Support env from file in a file-system via device tree   Sascha Hauer
• [PATCH 1/4] net: dhcp: unify options and params   Sascha Hauer
  • [PATCH 4/4] net: resolv: Make argument const   Sascha Hauer
• [PATCH 2/4] net: dhcp: simplify dhcp_options_process   Sascha Hauer
• [PATCH 3/4] net: dhcp: make unmodified variable const   Sascha Hauer
• [PATCH 1/7] hwclock command: use format like the Linux tool does   Sascha Hauer
  • [PATCH 3/7] rtc: Check time for validity before passing it to the rtc driver   Sascha Hauer
  • [PATCH 4/7] rtc: Fill in weekdays before setting time   Sascha Hauer
  • [PATCH 5/7] net: Add SNTP support   Sascha Hauer
  • [PATCH 6/7] hwclock: Allow to set hwclock from sntp   Sascha Hauer
  • [PATCH 7/7] rtc: Add Abracon driver   Sascha Hauer
  • [PATCH 1/7] hwclock command: use format like the Linux tool does   Fabio Estevam
    • [PATCH 1/7] hwclock command: use format like the Linux tool does   Sascha Hauer
• [PATCH 2/7] hwclock command: forward return value of rtc_set_time   Sascha Hauer
• [PATCH] input: gpio-keys: implement debouncing   Sascha Hauer
• [PATCH] state: implement signed int support   Sascha Hauer
• [PATCH v2] GPIO: add Microchip MCP23017 / MCP23008 GPIO driver   Florian Vallee
  • [PATCH v2] GPIO: add Microchip MCP23017 / MCP23008 GPIO driver   Antony Pavlov
  • [PATCH v2] GPIO: add Microchip MCP23017 / MCP23008 GPIO driver   Trent Piepho
    • [PATCH v2] GPIO: add Microchip MCP23017 / MCP23008 GPIO driver   Florian Vallée
• [PATCH] imx-usb-loader: Add i.MX6ul support   Florian Vallee
  • [PATCH] imx-usb-loader: Add i.MX6ul support   Sascha Hauer
• [PATCH v2] Symlink support for devfs   Sascha Hauer
  • [PATCH 1/2] devfs: Add symlink support   Sascha Hauer
  • [PATCH 2/2] partition: Create links with partition names   Sascha Hauer
• [PATCH] environment: allow saving of symbolic link changes   Zahari Doychev
  • [PATCH] environment: allow saving of symbolic link changes   Sascha Hauer
• [PATCH 1/4] partitions/efi: Add partuuid to partition description   Trent Piepho
  • [PATCH 2/4] of_path: Fix bug with partitions, simply code   Trent Piepho
  • [PATCH 3/4] environment: Support env from file in a file-system via device tree   Trent Piepho
  • [PATCH 4/4] socfpga: Find partition with environment via device tree   Trent Piepho
    • [PATCH 4/4] socfpga: Find partition with environment via device tree   Sascha Hauer
      • [PATCH 4/4] socfpga: Find partition with environment via device tree   Trent Piepho
      • [PATCH 4/4] socfpga: Find partition with environment via device tree   Sascha Hauer
• [PATCH 1/2] of: Add for_each_compatible_node_from iterator   Trent Piepho
  • [PATCH 2/2] of: Add of_property_for_each_phandle() iterator   Trent Piepho
• [PATCH 0/7] bcm283x: add support for raspberry pi 2   Alexander Aring
  • [PATCH 1/7] memtest: fix missing arguments in help string   Alexander Aring
  • [PATCH 2/7] led: add missing includes   Alexander Aring
  • [PATCH 3/7] arm: bcm2835: fix indentation   Alexander Aring
  • [PATCH 4/7] bcm2835: introduce mach-bcm283x   Alexander Aring
  • [PATCH 5/7] bcm283x: mbox: align to cachesize   Alexander Aring
  • [PATCH 6/7] rpi: sync revision detection with u-boot   Alexander Aring
  • [PATCH 7/7] arm: bcm283x: add rpi2 support   Alexander Aring
• [PATCH 1/2] mtd: nand: Add erased page bitflip check helper functions   Markus Pargmann
• [PATCH 2/2] mtd: gpmi: Add erased page bitflip correction   Markus Pargmann
• [RFC] device probe order   Peter Mamonov
  • [RFC] device probe order   Alexander Aring
    • [RFC] device probe order   Peter Mamonov
      • [RFC] device probe order   Alexander Aring
      • [RFC] device probe order   Peter Mamonov
      • [RFC] device probe order   Peter Mamonov
  • [RFC] device probe order   Sascha Hauer
    • [RFC] device probe order   Peter Mamonov
      • [RFC] device probe order   Alexander Aring
      • [RFC] device probe order   Peter Mamonov
      • [RFC] device probe order   Alexander Aring
• Patchwork for Barebox   Yegor Yefremov
• [RFC 0/4] FIT Support   Yegor Yefremov
• [RFC 3/4] FIT: add FIT image support   Yegor Yefremov
• You have received a new fax, document 00000317727   mailrobot at superstereo.ru
• [PATCH 1/6] ARM: asm: Add convenience fucntions to access VBAR   Andrey Smirnov
  • [PATCH 2/6] ARM: mmu: Add VBAR setup   Andrey Smirnov
  • [PATCH 3/6] ARM: Fix exception table setup in MMU-less mode   Andrey Smirnov
  • [PATCH 4/6] i.MX6: pci: Replace magic number with a named constant   Andrey Smirnov
  • [PATCH 5/6] i.MX6: pci: Reconcile imx6_pcie_start_link with the kernel code   Andrey Smirnov
  • [PATCH 6/6] i.MX6: pci: Avoid aborts when asserting PCIe reset   Andrey Smirnov

Last message date: Thu Dec 31 21:58:38 PST 2015
Archived on: Thu Dec 31 21:59:53 PST 2015

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...