October 2026 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Thu Oct 1 00:19:45 PDT 2026
Ending: Wed Oct 28 22:38:48 PDT 2026
Messages: 241

• [PATCH v4 4/4] wifi: ath12k: Connect to the QMI server belonging to the MHI endpoint that received the packet   Daizhuang Bai
• [PATCH ath-next v4 7/9] wifi: ath11k: charge received airtime to the station deficit   Julius Bairaktaris
• [PATCH] wifi: ath11k: apply the 160 MHz NSS ratio to the radio   Julius Bairaktaris
• [PATCH] wifi: ath11k: request firmware-2.bin directly   Julius Bairaktaris
• [PATCH v7 0/4] ath11k/ath12k: implement TX flow control   Julius Bairaktaris
• [PATCH ath-next] wifi: ath11k: report TX retries in station statistics   Julius Bairaktaris
• [PATCH ath-next v5 0/9] wifi: ath11k: airtime queue limits, airtime fairness and a driver TXQ scheduler   Julius Bairaktaris
• [PATCH ath-next v5 1/9] wifi: ath11k: free tx skbs through ieee80211_free_txskb()   Julius Bairaktaris
• [PATCH ath-next v5 2/9] wifi: ath11k: enable airtime queue limits   Julius Bairaktaris
• [PATCH ath-next v5 3/9] wifi: ath11k: report the pending tx MSDU count in soc_dp_stats   Julius Bairaktaris
• [PATCH ath-next v5 4/9] wifi: ath11k: report tx airtime and enable airtime fairness   Julius Bairaktaris
• [PATCH ath-next v5 5/9] wifi: ath11k: schedule TXQs from the driver   Julius Bairaktaris
• [PATCH ath-next v5 6/9] wifi: ath11k: run the TXQ scheduler on tx completion   Julius Bairaktaris
• [PATCH ath-next v5 7/9] wifi: ath11k: charge received airtime to the station deficit   Julius Bairaktaris
• [PATCH ath-next v5 8/9] wifi: ath11k: stop a scheduling round when the hardware refuses a frame   Julius Bairaktaris
• [PATCH ath-next v5 9/9] wifi: ath11k: budget the tx completion handler   Julius Bairaktaris
• [PATCH ath-next v2 0/5] wifi: ath11k: firmware crash recovery fixes   Julius Bairaktaris
• [PATCH ath-next v2 1/5] wifi: ath11k: initialise the CE descriptor waitqueue once per device   Julius Bairaktaris
• [PATCH ath-next v2 2/5] wifi: ath11k: keep the radios when a firmware recovery fails   Julius Bairaktaris
• [PATCH ath-next v2 3/5] wifi: ath11k: keep the srng allocations when a firmware recovery fails   Julius Bairaktaris
• [PATCH ath-next v2 4/5] wifi: ath11k: clear CRASH_FLUSH only after recovery rebuilds the rings   Julius Bairaktaris
• [PATCH ath-next v2 5/5] wifi: ath11k: hold back WMI commands while the firmware restarts   Julius Bairaktaris
• [PATCH RFC ath-next] wifi: ath11k: advance the TX PN of keys reinstalled after a firmware restart   Julius Bairaktaris
• [PATCH ath-next] wifi: ath11k: report TX retries in station statistics   Julius Bairaktaris
• [PATCH ath-next v5 0/9] wifi: ath11k: airtime queue limits, airtime fairness and a driver TXQ scheduler   Julius Bairaktaris
• [PATCH v7 0/4] ath11k/ath12k: implement TX flow control   Julius Bairaktaris
• [PATCH] wifi: ath11k: apply the 160 MHz NSS ratio to the radio   Julius Bairaktaris
• [PATCH v2 0/2] wifi: ath11k/ath12k: apply the 160 MHz NSS ratio to the radio   Julius Bairaktaris
• [PATCH v2 0/2] wifi: ath11k/ath12k: apply the 160 MHz NSS ratio to the radio   Julius Bairaktaris
• [PATCH v2 1/2] wifi: ath11k: apply the 160 MHz NSS ratio to the radio   Julius Bairaktaris
• [PATCH v2 2/2] wifi: ath12k: apply the 160 MHz NSS ratio to the radio for VHT   Julius Bairaktaris
• [PATCH v2 0/2] wifi: ath11k/ath12k: apply the 160 MHz NSS ratio to the radio   Julius Bairaktaris
• [PATCH ath-next 0/3] wifi: ath11k: select the hardware mode   Julius Bairaktaris
• [PATCH ath-next 1/3] wifi: ath11k: skip unknown hardware modes   Julius Bairaktaris
• [PATCH ath-next 2/3] wifi: ath11k: ignore regulatory info of phys outside the hw mode   Julius Bairaktaris
• [PATCH ath-next 3/3] wifi: ath11k: add a module parameter to select the hardware mode   Julius Bairaktaris
• [PATCH v2 2/7] wifi: ath11k: enable support for WCN6851   Demeter Barna
• [PULL linux-firmware] ath10k, ath11k and ath12k firmware ath-20261008   Dmitry Baryshkov
• [PULL linux-firmware] ath10k, ath11k and ath12k firmware ath-20261021   Dmitry Baryshkov
• [PULL linux-firmware] ath10k, ath11k and ath12k firmware ath-20261022   Dmitry Baryshkov
• [PATCH v2 1/3] wifi: ath12k: fix MLO station firmware crash recovery   Johannes Berg
• [PATCH v2 1/3] wifi: ath12k: fix MLO station firmware crash recovery   Johannes Berg
• [PATCH] wifi: ath11k: fix NULL dereference in pci remove when QMI init incomplete   Andrei-Alexandru Bleortu
• [PATCH] wifi: ath11k: handle HTT PPDU ID format indication   Andrei-Alexandru Bleortu
• [PATCH 0/4] arm64: dts: qcom: ipq5018: add Ubiquiti UniFi U6 Enterprise   Andrei-Alexandru Bleortu
• [PATCH 1/4] dt-bindings: net: wireless: qcom,ath11k-pci: add QCN9074   Andrei-Alexandru Bleortu
• [PATCH 2/4] dt-bindings: arm: qcom: add Ubiquiti UniFi U6 Enterprise   Andrei-Alexandru Bleortu
• [PATCH 3/4] arm64: dts: qcom: ipq5018: label the PCIe1 root port   Andrei-Alexandru Bleortu
• [PATCH 4/4] arm64: dts: qcom: ipq5018: add Ubiquiti UniFi U6 Enterprise   Andrei-Alexandru Bleortu
• ath11k-firmware: IPQ5018 hw1.0: add Ubiquiti UniFi U6 Enterprise   Andrei-Alexandru Bleortu
• ath11k-firmware: QCN9074 hw1.0: add Ubiquiti UniFi U6 Enterprise   Andrei-Alexandru Bleortu
• [PATCH 0/4] wifi: ath11k: beacon protection and firmware airtime fairness   Andrei-Alexandru Bleortu
• [PATCH 1/4] wifi: ath11k: add a debugfs file listing the firmware WMI services   Andrei-Alexandru Bleortu
• [PATCH 2/4] wifi: ath11k: support beacon protection   Andrei-Alexandru Bleortu
• [PATCH 3/4] wifi: mac80211: notify driver on airtime weight changes   Andrei-Alexandru Bleortu
• [PATCH 4/4] wifi: ath11k: support firmware airtime fairness   Andrei-Alexandru Bleortu
• [PATCH v2 0/3] arm64: dts: qcom: ipq5018: add Ubiquiti UniFi U6 Enterprise   Andrei-Alexandru Bleortu
• [PATCH v2 1/3] dt-bindings: net: wireless: qcom,ath11k-pci: add QCN9074   Andrei-Alexandru Bleortu
• [PATCH v2 2/3] dt-bindings: arm: qcom: add Ubiquiti UniFi U6 Enterprise   Andrei-Alexandru Bleortu
• [PATCH v2 3/3] arm64: dts: qcom: ipq5018: add Ubiquiti UniFi U6 Enterprise   Andrei-Alexandru Bleortu
• [PATCH ath-next 0/5] wifi: ath11k: WMI services debugfs and HE AP fixes   Andrei-Alexandru Bleortu
• [PATCH ath-next 1/5] wifi: ath11k: add a debugfs file listing the firmware WMI services   Andrei-Alexandru Bleortu
• [PATCH ath-next 2/5] wifi: ath11k: count down channel switch announcements in mac80211   Andrei-Alexandru Bleortu
• [PATCH ath-next 3/5] wifi: ath11k: leave OBSS PD off when spatial reuse is not configured   Andrei-Alexandru Bleortu
• [PATCH ath-next 4/5] wifi: ath11k: set the 6 GHz transmit power limits of an AP   Andrei-Alexandru Bleortu
• [PATCH ath-next 5/5] wifi: ath11k: map DSCP to TID as cfg80211 does by default   Andrei-Alexandru Bleortu
• [PATCH ath-next 0/2] wifi: ath11k: firmware airtime fairness, BSS color while disabled   Andrei-Alexandru Bleortu
• [PATCH ath-next 1/2] wifi: ath11k: support firmware airtime fairness   Andrei-Alexandru Bleortu
• [PATCH ath-next 2/2] wifi: ath11k: keep the BSS color while it is disabled   Andrei-Alexandru Bleortu
• [PATCH v2 3/3] arm64: dts: qcom: ipq5018: add Ubiquiti UniFi U6 Enterprise   Andrei-Alexandru Bleortu
• [PATCH v3 0/4] arm64: dts: qcom: ipq5018: add Ubiquiti UniFi U6 Enterprise   Andrei-Alexandru Bleortu
• [PATCH v3 1/4] dt-bindings: net: wireless: qcom,ath11k-pci: add QCN9074   Andrei-Alexandru Bleortu
• [PATCH v3 2/4] dt-bindings: arm: qcom: add Ubiquiti UniFi U6 Enterprise   Andrei-Alexandru Bleortu
• [PATCH v3 3/4] arm64: dts: qcom: ipq5018: enable the PRNG by default   Andrei-Alexandru Bleortu
• [PATCH v3 4/4] arm64: dts: qcom: ipq5018: add Ubiquiti UniFi U6 Enterprise   Andrei-Alexandru Bleortu
• [PATCH ath-next 0/2] wifi: ath11k: fix two races between ieee80211_register_hw() and the rest of mac registration   Nikolay Bryskin
• [PATCH 1/2] wifi: ath11k: initialize txmgmt_empty_waitq before registering the hw   Nikolay Bryskin
• [PATCH 2/2] wifi: ath11k: apply the initial regdomain before registering the wiphy   Nikolay Bryskin
• [PATCH v5 1/6] PCI/bwctrl: Set host bridge OPP and optionally disable ASPM around link retraining   Krishna Chaitanya Chundru
• [PATCH v2 3/3] arm64: dts: qcom: ipq5018: add Ubiquiti UniFi U6 Enterprise   Konrad Dybcio
• [PATCH v3 3/4] arm64: dts: qcom: ipq5018: enable the PRNG by default   Konrad Dybcio
• [PATCH v3 4/4] arm64: dts: qcom: ipq5018: add Ubiquiti UniFi U6 Enterprise   Konrad Dybcio
• [PATCH ath-next] wifi: ath11k: report TX retries in station statistics   Nicolas Escande
• ath11k: QCN9074 public firmware stalls at QMI cap request on C-360   Christopher Griffin
• ath11k: QCN9074 public firmware stalls at QMI cap request on C-360   Christopher Griffin
• [PATCH 3/7] vfio/pci: Add qcom-vfio-pci variant driver   Jason Gunthorpe
• [PATCH 0/7] Enable Qualcomm WiFi PCIe passthrough to VMs   Jason Gunthorpe
• [PATCH v2 0/7] Enable Qualcomm WiFi PCIe passthrough to VMs   Jason Gunthorpe
• [PATCH 0/7] Enable Qualcomm WiFi PCIe passthrough to VMs   Jason Gunthorpe
• [PATCH 0/7] Enable Qualcomm WiFi PCIe passthrough to VMs   Jason Gunthorpe
• [PATCH 0/7] Enable Qualcomm WiFi PCIe passthrough to VMs   Jason Gunthorpe
• [PATCH v14 0/2] PCI: Add device-specific reset for Qualcomm devices   Bjorn Helgaas
• [PATCH v3 3/8] PCI/ASPM: Transition the device to D0 (if required) when enabling ASPM link states   Bjorn Helgaas
• [PATCH v14 0/2] PCI: Add device-specific reset for Qualcomm devices   Bjorn Helgaas
• [PATCH v15 0/2] PCI: Add device-specific reset for Qualcomm devices   Bjorn Helgaas
• [PATCH v3 2/8] PCI/ASPM: Add pci_force_enable_link_state() API   Bjorn Helgaas
• [PATCH v3 2/8] PCI/ASPM: Add pci_force_enable_link_state() API   Bjorn Helgaas
• [PATCH 4/7] ath11k: add PCIe link recovery retry   Bjorn Helgaas
• [PATCH v3 0/8] PCI/ASPM: Add pci_force_enable_link_state() API and convert Atheros drivers   Bjorn Helgaas
• [PATCH v3 1/8] PCI/ASPM: Always disable ASPM when driver requests it   Bjorn Helgaas
• [PATCH v3 0/8] PCI/ASPM: Add pci_force_enable_link_state() API and convert Atheros drivers   Bjorn Helgaas
• [PATCH v3 2/4] net: qrtr: Assign unique node id for MHI endpoints   Marcel Holtmann
• [PATCH v4 1/4] net: qrtr: Allow the host QRTR to assign a unique node id   Simon Horman
• [PATCH v4 2/4] net: qrtr: Assign unique node id for MHI endpoints   Simon Horman
• [PATCH v4 3/4] wifi: ath11k: Connect to the QMI server belonging to the device owned by this driver   Simon Horman
• [PATCH v4 4/4] wifi: ath12k: Connect to the QMI server belonging to the device owned by this driver   Simon Horman
• [PATCH ath-current] wifi: ath11k: fix unbalanced IRQ enable/disable during suspend/resume   Jeff Johnson
• pull-request: ath-current-20261006   Jeff Johnson
• [PULL linux-firmware] ath10k, ath11k and ath12k firmware ath-20261008   Jeff Johnson
• [PATCH] wifi: ath11k: initialize CFR locks before capability checks   Jeff Johnson
• [PATCH v2 0/5] wifi: ath: avoid IDR mutation while iterating   Jeff Johnson
• [PATCH v2 0/7] Enable Qualcomm WiFi PCIe passthrough to VMs   Jeff Johnson
• [PATCH v2 0/5] wifi: ath: avoid IDR mutation while iterating   Jeff Johnson
• [PATCH v2 0/5] wifi: ath: avoid IDR mutation while iterating   Jeff Johnson
• pull-request: ath-next-20261012   Jeff Johnson
• [PATCH 0/4] wifi: ath11k/ath12k: validate firmware array lengths   Jeff Johnson
• [PATCH 0/4] wifi: ath11k/ath12k: validate firmware array lengths   Jeff Johnson
• [PULL linux-firmware] ath10k, ath11k and ath12k firmware ath-20261021   Jeff Johnson
• [PULL linux-firmware] ath10k, ath11k and ath12k firmware ath-20261022   Jeff Johnson
• [PULL linux-firmware] ath10k, ath11k and ath12k firmware ath-20261021   Jeff Johnson
• [PATCH v4 3/4] wifi: ath11k: Connect to the QMI server belonging to the device owned by this driver   Jeff Johnson
• [PATCH v4 4/4] wifi: ath12k: Connect to the QMI server belonging to the device owned by this driver   Jeff Johnson
• [PATCH 0/5] wifi: ath11k/ath12k: validate capability TLV lengths   Jeff Johnson
• [PATCH v3 1/4] dt-bindings: net: wireless: qcom,ath11k-pci: add QCN9074   Jeff Johnson
• [PATCH ath-next 3/3] wifi: ath11k: add a module parameter to select the hardware mode   Jeff Johnson
• [PATCH 0/5] wifi: ath11k/ath12k: validate capability TLV lengths   Jeff Johnson
• [PATCH] wifi: ath11k: Reject short management RX frames   Jeff Johnson
• [PATCH v3 2/8] PCI/ASPM: Add pci_force_enable_link_state() API   Ilpo Järvinen
• [PATCH v3 2/8] PCI/ASPM: Add pci_force_enable_link_state() API   Ilpo Järvinen
• [PATCH v3 0/8] PCI/ASPM: Add pci_force_enable_link_state() API and convert Atheros drivers   Ilpo Järvinen
• [PATCH v3 0/8] PCI/ASPM: Add pci_force_enable_link_state() API and convert Atheros drivers   Ilpo Järvinen
• [PATCH 0/7] Enable Qualcomm WiFi PCIe passthrough to VMs   Michael Kelley
• [PATCH v4 0/4] net: qrtr: Add support for using identical MHI endpoint devices   Jakub Kicinski
• [PATCH 1/4] dt-bindings: net: wireless: qcom,ath11k-pci: add QCN9074   Krzysztof Kozlowski
• [PATCH 2/4] dt-bindings: arm: qcom: add Ubiquiti UniFi U6 Enterprise   Krzysztof Kozlowski
• [PATCH 3/4] arm64: dts: qcom: ipq5018: label the PCIe1 root port   Krzysztof Kozlowski
• [PATCH ath-next] wifi: ath11k: require unique station addresses per radio   Patrick Lawler
• [PATCH AUTOSEL 6.18-5.10] wifi: ath11k: validate regulatory capability phy_id   Sasha Levin
• [PATCH AUTOSEL 6.18-6.12] wifi: ath11k: fix resource leak on error in ext IRQ setup   Sasha Levin
• [RFC] IPQ8074 v1 / Netgear RAX120 v1: interest in support and review prerequisites   John Macias
• [RFC PATCH ath-next] wifi: ath11k: refuse a peer whose address exists on another pdev   John Macias
• [RFC] IPQ8074 v1 / Netgear RAX120 v1: interest in support and review prerequisites   Zephyr Madera
• [PATCH 3/7] vfio/pci: Add qcom-vfio-pci variant driver   Jose Ignacio Tornos Martinez
• [PATCH v14 0/2] PCI: Add device-specific reset for Qualcomm devices   Jose Ignacio Tornos Martinez
• [PATCH v15 0/2] PCI: Add device-specific reset for Qualcomm devices   Jose Ignacio Tornos Martinez
• [PATCH v15 1/2] PCI: Add device-specific reset for Qualcomm SDX62/SDX65 modems   Jose Ignacio Tornos Martinez
• [PATCH v15 2/2] PCI: Add device-specific reset for Qualcomm WCN6855/WCN7850 WLAN   Jose Ignacio Tornos Martinez
• [PATCH 3/7] vfio/pci: Add qcom-vfio-pci variant driver   Jose Ignacio Tornos Martinez
• [PATCH v2 0/7] Enable Qualcomm WiFi PCIe passthrough to VMs   Jose Ignacio Tornos Martinez
• [PATCH v2 1/7] PCI: Add pci_find_free_ext_cap_offset() helper   Jose Ignacio Tornos Martinez
• [PATCH v2 2/7] vfio: Add qcom_vfio.h header for MSI cache protocol   Jose Ignacio Tornos Martinez
• [PATCH v2 3/7] vfio/pci: Add qcom-vfio-pci variant driver   Jose Ignacio Tornos Martinez
• [PATCH v2 4/7] ath11k: add PCIe link recovery retry   Jose Ignacio Tornos Martinez
• [PATCH v2 5/7] ath11k: Use VFIO MSI cache when available   Jose Ignacio Tornos Martinez
• [PATCH v2 6/7] ath12k: add PCIe link recovery retry   Jose Ignacio Tornos Martinez
• [PATCH v2 7/7] ath12k: Use VFIO MSI cache when available   Jose Ignacio Tornos Martinez
• [PATCH 0/7] Enable Qualcomm WiFi PCIe passthrough to VMs   Jose Ignacio Tornos Martinez
• [PATCH 0/7] Enable Qualcomm WiFi PCIe passthrough to VMs   Jose Ignacio Tornos Martinez
• [PATCH 0/7] Enable Qualcomm WiFi PCIe passthrough to VMs   Jose Ignacio Tornos Martinez
• [PATCH v2 0/3] wifi: ath12k: fixes to improve MLO station stability   Jose Ignacio Tornos Martinez
• [PATCH v7 0/4] ath11k/ath12k: implement TX flow control   Jose Ignacio Tornos Martinez
• [PATCH 4/7] ath11k: add PCIe link recovery retry   Jose Ignacio Tornos Martinez
• [PATCH 0/7] Enable Qualcomm WiFi PCIe passthrough to VMs   Jose Ignacio Tornos Martinez
• [PATCH v7 0/4] ath11k/ath12k: implement TX flow control   Jose Ignacio Tornos Martinez
• [PATCH v2 1/3] wifi: ath12k: fixes to improve MLO station stability   Jose Ignacio Tornos Martinez
• [PATCH v2 1/3] wifi: ath12k: fix MLO station firmware crash recovery   Jose Ignacio Tornos Martinez
• [PATCH v7 0/4] ath11k/ath12k: implement TX flow control   Jose Ignacio Tornos Martinez
• [PATCH v8 0/3] wifi: ath11k: implement TX flow control   Jose Ignacio Tornos Martinez
• [PATCH v8 1/2] wifi: ath11k: use queue mapping for WCN6750 ring selection   Jose Ignacio Tornos Martinez
• [PATCH v8 2/3] wifi: ath11k: remove skb parameter from get_ring_selector   Jose Ignacio Tornos Martinez
• [PATCH v8 3/3] wifi: ath11k: implement custom wake_tx_queue with flow control   Jose Ignacio Tornos Martinez
• [PATCH v8 0/2] wifi: ath12k: implement TX flow control   Jose Ignacio Tornos Martinez
• [PATCH v8 1/2] wifi: ath12k: remove skb parameter from get_ring_selector   Jose Ignacio Tornos Martinez
• [PATCH v8 2/2] wifi: ath12k: implement custom wake_tx_queue with flow control   Jose Ignacio Tornos Martinez
• [PATCH v5 1/6] PCI/bwctrl: Set host bridge OPP and optionally disable ASPM around link retraining   Val Packett
• [PATCH v3 2/8] PCI/ASPM: Add pci_force_enable_link_state() API   Val Packett
• [PATCH ath-next] wifi: ath11k: don't select ATH_COMMON   Rosen Penev
• [PATCH v3] wifi: ath11k: release peer accounting on peer delete timeout   Baochen Qiang
• [PATCH v2 0/5] wifi: ath: avoid IDR mutation while iterating   Baochen Qiang
• [PATCH v2 1/3] wifi: ath12k: fix MLO station firmware crash recovery   Baochen Qiang
• [PATCH v2 0/7] Enable Qualcomm WiFi PCIe passthrough to VMs   Baochen Qiang
• [PATCH v2 1/3] wifi: ath12k: fix MLO station firmware crash recovery   Baochen Qiang
• [PATCH v2 1/3] wifi: ath12k: fixes to improve MLO station stability   Baochen Qiang
• [PATCH] wifi: ath11k: Unprepare MHI on power up failure   Baochen Qiang
• [PATCH v7 0/4] ath11k/ath12k: implement TX flow control   Tamizh Raja
• [PATCH ath-next 0/2] wifi: ath11k: two monitor destination ring fixes   Christopher Griffin via B4 Relay
• [PATCH ath-next 1/2] wifi: ath11k: don't free a monitor buffer the device still holds   Christopher Griffin via B4 Relay
• [PATCH ath-next 2/2] wifi: ath11k: don't take a monitor PPDU ID of 0 for no change   Christopher Griffin via B4 Relay
• [PATCH ath-next] wifi: ath11k: update rx_channel on a channel switch   Christopher Griffin via B4 Relay
• [PATCH ath-next] wifi: ath11k: report the measured noise floor of the channel in use   Christopher Griffin via B4 Relay
• [PATCH ath-next] wifi: ath11k: fix beacon stats with more than one started vdev   Christopher Griffin via B4 Relay
• [PATCH ath-next 0/2] wifi: ath11k: HT, VHT and every stream for a QCN9074's 5 GHz band   Christopher Griffin via B4 Relay
• [PATCH ath-next 1/2] wifi: ath11k: give a 6 GHz capable radio's 5 GHz band HT and VHT   Christopher Griffin via B4 Relay
• [PATCH ath-next 2/2] wifi: ath11k: advertise a spatial stream for every chain   Christopher Griffin via B4 Relay
• [PATCH RFC ath-next 0/2] wifi: ath11k/ath12k: bound READY MAC address array reads   John Macias via B4 Relay
• [PATCH RFC ath-next 1/2] wifi: ath11k: bound READY MAC address array reads   John Macias via B4 Relay
• [PATCH RFC ath-next 2/2] wifi: ath12k: bound READY MAC address array reads   John Macias via B4 Relay
• [PATCH ath-next v2 0/2] wifi: ath11k/ath12k: bound READY MAC address array reads   John Macias via B4 Relay
• [PATCH ath-next v2 1/2] wifi: ath11k: bound READY MAC address array reads   John Macias via B4 Relay
• [PATCH ath-next v2 2/2] wifi: ath12k: bound READY MAC address array reads   John Macias via B4 Relay
• [PATCH v4 0/4] net: qrtr: Add support for using identical MHI endpoint devices   Manivannan Sadhasivam via B4 Relay
• [PATCH v4 1/4] net: qrtr: Allow the host QRTR to assign a unique node id   Manivannan Sadhasivam via B4 Relay
• [PATCH v4 2/4] net: qrtr: Assign unique node id for MHI endpoints   Manivannan Sadhasivam via B4 Relay
• [PATCH v4 3/4] wifi: ath11k: Connect to the QMI server belonging to the device owned by this driver   Manivannan Sadhasivam via B4 Relay
• [PATCH v4 4/4] wifi: ath12k: Connect to the QMI server belonging to the device owned by this driver   Manivannan Sadhasivam via B4 Relay
• [PATCH v3 2/4] net: qrtr: Assign unique node id for MHI endpoints   Manivannan Sadhasivam
• [PATCH v3 1/8] PCI/ASPM: Always disable ASPM when driver requests it   Manivannan Sadhasivam
• [PATCH v3 0/8] PCI/ASPM: Add pci_force_enable_link_state() API and convert Atheros drivers   Manivannan Sadhasivam
• [PATCH v3 1/4] net: qrtr: Allow the host QRTR to assign a unique node id   Manivannan Sadhasivam
• [PATCH v2 3/5] wifi: ath11k: avoid IDR mutation during vif mgmt TX cleanup   Rameshkumar Sundaram
• [PATCH v2 0/5] wifi: ath: avoid IDR mutation while iterating   Rameshkumar Sundaram
• [PATCH] wifi: ath11k: apply the 160 MHz NSS ratio to the radio   Rameshkumar Sundaram
• [PATCH v2 0/2] wifi: ath11k/ath12k: apply the 160 MHz NSS ratio to the radio   Rameshkumar Sundaram
• [PATCH] wifi: ath11k: Unprepare MHI on power up failure   Rameshkumar Sundaram
• [PATCH] wifi: ath11k: initialize CFR locks before capability checks   Vasanthakumar Thiagarajan
• [PATCH v3 2/4] net: qrtr: Assign unique node id for MHI endpoints   Juha-Matti Tilli
• [PATCH v4 4/4] wifi: ath12k: Connect to the QMI server belonging to the device owned by this driver   Juha-Matti Tilli
• [PATCH v14 0/2] PCI: Add device-specific reset for Qualcomm devices   Alex Williamson
• [PATCH] wifi: ath11k: initialize CFR locks before capability checks   Runyu Xiao
• [PATCH v2 0/5] wifi: ath: avoid IDR mutation while iterating   Jiale Yao
• [PATCH v2 2/5] wifi: ath11k: avoid IDR mutation during pending mgmt TX cleanup   Jiale Yao
• [PATCH v2 3/5] wifi: ath11k: avoid IDR mutation during vif mgmt TX cleanup   Jiale Yao
• [PATCH 0/4] wifi: ath11k/ath12k: validate firmware array lengths   Jiale Yao
• [PATCH 1/4] wifi: ath11k: validate extended regulatory capability count   Jiale Yao
• [PATCH 3/4] wifi: ath11k: validate ready event MAC address array length   Jiale Yao
• [PATCH 0/4] wifi: ath11k/ath12k: validate firmware array lengths   Jiale Yao
• [PATCH 1/4] wifi: ath11k: validate extended regulatory capability count   Jiale Yao
• [PATCH 3/4] wifi: ath11k: validate ready event MAC address array length   Jiale Yao
• [PATCH 0/5] wifi: ath11k/ath12k: validate capability TLV lengths   Jiale Yao
• [PATCH 1/5] wifi: ath11k: validate DMA buffer release TLV lengths   Jiale Yao
• [PATCH 2/5] wifi: ath11k: validate hardware mode capability TLVs   Jiale Yao
• [PATCH 3/5] wifi: ath11k: validate DMA ring capability TLVs   Jiale Yao
• [PATCH v2 0/5] wifi: ath11k/ath12k: validate capability TLV lengths   Jiale Yao
• [PATCH v2 1/5] wifi: ath11k: validate DMA buffer release TLV lengths   Jiale Yao
• [PATCH v2 2/5] wifi: ath11k: validate hardware mode capability TLVs   Jiale Yao
• [PATCH v2 3/5] wifi: ath11k: validate DMA ring capability TLVs   Jiale Yao
• [PATCH v2 4/5] wifi: ath12k: validate DMA buffer release TLV lengths   Jiale Yao
• [PATCH v2 5/5] wifi: ath12k: validate service-ready capability TLV lengths   Jiale Yao
• [PATCH] wifi: ath11k: Unprepare MHI on power up failure   Vladimir Zapolskiy
• [PATCH 0/4] wifi: ath11k/ath12k: validate firmware array lengths   jiale yao
• [PATCH 0/5] wifi: ath11k/ath12k: validate capability TLV lengths   jiale yao

Last message date: Wed Oct 28 22:38:48 PDT 2026
Archived on: Wed Oct 28 22:38:58 PDT 2026

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...