[PATCH 3/4] arm64: dts: qcom: ipq5018: label the PCIe1 root port

[Andrei-Alexandru Bleortu]

The root port of pcie0 has a label, the one of pcie1 has none, so a
board cannot attach its PERST# GPIO or a device below it the same way.
Add pcie1_port0.

Assisted-by: LLM
Signed-off-by: Andrei-Alexandru Bleortu <me at andrei-z.com>
---
 arch/arm64/boot/dts/qcom/ipq5018.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index fe1ed240d..2f3bcfa88 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -838,7 +838,7 @@ pcie1: pcie at 80000000 {
 
 			status = "disabled";
 
-			pcie at 0 {
+			pcie1_port0: pcie at 0 {
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
 				bus-range = <0x01 0xff>;
-- 
2.47.3