[PATCH v2 3/3] arm64: dts: qcom: ipq5018: add Ubiquiti UniFi U6 Enterprise

[Konrad Dybcio]

On 10/4/26 1:10 PM, Andrei-Alexandru Bleortu wrote:
> The Ubiquiti UniFi U6 Enterprise is a ceiling-mount Wi-Fi 6E access point:

[...]

> +	keys {
> +		compatible = "gpio-keys";
> +		pinctrl-0 = <&button_pins>;
> +		pinctrl-names = "default";
> +
> +		button-reset {
> +			label = "reset";

Normally we do sentence case here, i.e. "Reset"

> +			gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_RESTART>;
> +		};
> +	};
> +};
> +
> +&blsp1_i2c3 {
> +	pinctrl-0 = <&i2c_pins>;
> +	pinctrl-names = "default";
> +	status = "okay";

Please keep a \n before 'status', file-wide for consistency

[...]

> +&pcie0_port0 {
> +	reset-gpios = <&tlmm 15 GPIO_ACTIVE_LOW>;

No wake-gpios?


> +
> +	wifi at 0,0 {
> +		compatible = "pci17cb,1104";
> +		reg = <0x10000 0x0 0x0 0x0 0x0>;
> +		qcom,calibration-variant = "Ubiquiti-U6-Enterprise-5G";

Does the same calibration work for both radios?

[...]

> +&prng {
> +	status = "okay";
> +};

Please add a preceding patch to enable it in the SoC DTSI, this should
never really need to be disabled

Konrad