[PATCH v3 4/4] arm64: dts: qcom: ipq5018: add Ubiquiti UniFi U6 Enterprise

[Konrad Dybcio]

On 10/23/26 3:37 PM, Andrei-Alexandru Bleortu wrote:
> The Ubiquiti UniFi U6 Enterprise is a ceiling-mount Wi-Fi 6E access point:
> 
> - SoC: Qualcomm IPQ5018
> - RAM: 1 GiB
> - Flash: SPI NOR (boot chain) and eMMC
> - 5 GHz: QCN9074 on PCIe0
> - 6 GHz: QCN9074 on PCIe1
> - Ethernet: one 2.5GbE PoE port, a QCA8081 PHY behind GMAC1
> - Accelerometer: ST LIS2DH12
> - Button: reset
> 
> Describe what mainline supports today. The Ethernet port and the
> IPQ5018's own 2.4 GHz radio are left out until the GMAC and the WCSS
> remoteproc have bindings; the LED controller and the board MCU on the
> I2C bus have none. The QCN9074s carry the calibration variants their
> board data is looked up by. The SoC dtsi gains the pcie1_port0 label, as
> pcie0 has, for the 6 GHz radio below that root port. The vendor QSEE
> reserves 4 MiB, twice the SoC default.
> 
> Assisted-by: LLM
> Signed-off-by: Andrei-Alexandru Bleortu <me at andrei-z.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio at oss.qualcomm.com>

Konrad