January 2017 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Fri Jan 6 00:44:43 PST 2017
Ending: Tue Jan 31 23:18:12 PST 2017
Messages: 222

• [PATCH 0/5] EFI fixes   Michael Olbrich
• [PATCH 0/5] EFI fixes   Sascha Hauer
• [PATCH 01/23] imx-usb-loader: let constant data be const   Sascha Hauer
• [PATCH 02/23] imx-usb-loader: this table is used internally only, so keep it static   Sascha Hauer
• [PATCH 02/23] imx-usb-loader: this table is used internally only, so keep it static   Juergen Borleis
• [PATCH 03/23] imx-usb-loader: add i.MX7S support   Sascha Hauer
• [PATCH 04/23] ARM: Makefile: format fix   Sascha Hauer
• [PATCH 05/23] i2c: i.MX: Enable clock   Sascha Hauer
• [PATCH 06/23] mci: imx-esdhc: Enable clock   Sascha Hauer
• [PATCH 07/23] serial: i.MX: Enable clock   Sascha Hauer
• [PATCH 08/23] usb: imx: Make usb-misc multi instance safe   Sascha Hauer
• [PATCH 09/23] usb: imx: Add usbmisc support for i.MX7   Sascha Hauer
• [PATCH 1/2] arm: am33xx: add reset duration control register address definition   Sascha Hauer
• [PATCH 1/2] imx-bbu-nand-fcb: split up read_fcb   Sascha Hauer
• [PATCH 1/2] mci: imx: Add imx6sx compatible   Sascha Hauer
• [PATCH 1/2] of: provice for_each_matching_node_from   Uwe Kleine-König
• [PATCH 1/2] watchdog: i.MX: add soc_reset operation   Sascha Hauer
• [PATCH 1/2] watchdog: i.MX: add soc_reset operation   Sam Ravnborg
• [PATCH 1/2] watchdog: i.MX: add soc_reset operation   Sam Ravnborg
• [PATCH 1/2] watchdog: i.MX: add soc_reset operation   Sascha Hauer
• [PATCH 1/3] defaultenv: select COMMAND_SUPPORT and GLOBALVAR   Lucas Stach
• [PATCH 1/3] defaultenv: select COMMAND_SUPPORT and GLOBALVAR   Sascha Hauer
• [PATCH 1/3] spi: mvebu: fix register macros for Armada 370/XP clock divider   Uwe Kleine-König
• [PATCH 1/3] spi: mvebu: fix register macros for Armada 370/XP clock divider   Sascha Hauer
• [PATCH 1/5] ARM: i.MX: Add i.MX7 base architecture support   Sascha Hauer
• [PATCH 1/5] ARM i.MX: move cpu_type macros in front of cpu_revision code   Alexander Kurz
• [PATCH 1/5] readkey: keys are unsigned char   Michael Olbrich
• [PATCH 1/9] fs: squashfs: don't reference UBI symbols if UBI isn't compiled in   Sascha Hauer
• [PATCH 10/23] usb: imx: Add clock support   Sascha Hauer
• [PATCH 11/23] phy: usb-nop-xceiv: Add clock support   Sascha Hauer
• [PATCH 12/23] of: partitions: force "partitions" subnode   Sascha Hauer
• [PATCH 13/23] mci: Allow to partition eMMC boot partitions   Sascha Hauer
• [PATCH 14/23] mci: imx-esdhci: remove wrong write protection test   Sascha Hauer
• [PATCH 15/23] ARM: i.MX: Add i.MX7 base architecture support   Sascha Hauer
• [PATCH 16/23] clk: i.MX: pllv3: Add support for the i.MX7 enet pll   Sascha Hauer
• [PATCH 17/23] clk: imx: Add clk-cpu support   Sascha Hauer
• [PATCH 18/23] clk: i.MX: Add clock support for i.MX7   Sascha Hauer
• [PATCH 19/23] clk: i.MX7: Add missing USB clocks   Sascha Hauer
• [PATCH 2/2] bus: mvebu-mbus: fixup correct device tree   Uwe Kleine-König
• [PATCH 2/2] watchdog: i.MX: Fix internal/external reset   Sascha Hauer
• [PATCH 2/3] usb: gadget: disable AT91 driver on SAMA5D4   Lucas Stach
• [PATCH 2/5] ARM i.MX: add SoC type detection for i.MX6SL   Alexander Kurz
• [PATCH 2/5] pinmmux: i.MX: add pin mux support for i.MX7   Sascha Hauer
• [PATCH 2/5] serial: efi: improve input handling   Michael Olbrich
• [PATCH 20/23] ARM: i.MX: gpt: Add i.MX7 support   Sascha Hauer
• [PATCH 20/23] ARM: i.MX: gpt: Add i.MX7 support   Juergen Borleis
• [PATCH 21/23] pinmmux: i.MX: add pin mux support for i.MX7   Sascha Hauer
• [PATCH 22/23] serial: i.MX: add i.MX7 support   Sascha Hauer
• [PATCH 23/23] ARM: i.MX: Add WaRP7 board support   Sascha Hauer
• [PATCH 3/3] barebox-imd: add dependency on generated/compile.h also for PBL version   Lucas Stach
• [PATCH 3/5] ARM: i.MX6SL: import clock infrastructure from linux   Alexander Kurz
• [PATCH 3/5] ARM: i.MX: Add WaRP7 board support   Sascha Hauer
• [PATCH 3/5] output: use '[0m' to reset colors   Michael Olbrich
• [PATCH 4/5] ARM: i.MX7: initialize architected timer   Sascha Hauer
• [PATCH 4/5] ARM i.MX: Add i.MX6SL support   Alexander Kurz
• [PATCH 4/5] efi: include and execute exit calls   Michael Olbrich
• [PATCH 5/5] ARM i.MX6SL: Add support for the Tolino Vision, Vision2 and Vision3HD   Alexander Kurz
• [PATCH 5/5] efi: don't unload drivers   Michael Olbrich
• [PATCH 5/5] regulator: Add pfuze driver   Sascha Hauer
• [PATCH 8/9] lib: add generic find_bit implementation from Linux and use in ARMv8   Sascha Hauer
• [PATCH] arm: am33xx: Initialize EMIF REG_PR_OLD_COUNT   Daniel Schultz
• [PATCH] arm: am33xx: Initialize EMIF REG_PR_OLD_COUNT   Sascha Hauer
• [PATCH] arm: decalare div0 as weak function   DU HUANPENG
• [PATCH] arm: decalare div0 as weak function   Sascha Hauer
• [PATCH] arm: decalare div0 as weak function   Du Huanpeng
• [PATCH] ARM: Fix a bug in stack's "top" initialization   Sascha Hauer
• [PATCH] ARM: i.MX53 Vincell: change dialog compatible to proper vendor prefix   Sascha Hauer
• [PATCH] ARM: i.MX7: add AIPS base address defines   Alexander Kurz
• [PATCH] ARM: i.MX7: add AIPS base address defines   Sascha Hauer
• [PATCH] ARM: i.MX7: add AIPS base address defines   Alexander Kurz
• [PATCH] ARM: i.MX7: Kconfig: ARCH_IMX7 selects COMMON_CLK_OF_PROVIDER   Alexander Kurz
• [PATCH] ARM: i.MX7: Kconfig: ARCH_IMX7 selects COMMON_CLK_OF_PROVIDER   Sascha Hauer
• [PATCH] ARM: mvebu: enable MMU in defconfig   Sascha Hauer
• [PATCH] arm: omap: OMAP_SERIALBOOT needs console support   Lucas Stach
• [PATCH] arm: omap: OMAP_SERIALBOOT needs console support   Sascha Hauer
• [PATCH] ARM: socfpga: dtsi: remove fpgamgr+sysmgr entry   Steffen Trumtrar
• [PATCH] ARM: socfpga: dtsi: remove fpgamgr+sysmgr entry   Sascha Hauer
• [PATCH] ARM: socfpga: remove unused entry from Makefile   Steffen Trumtrar
• [PATCH] ARM: socfpga: remove unused entry from Makefile   Sascha Hauer
• [PATCH] ARM: vf610-twr: remove unused variable   Sascha Hauer
• [PATCH] ARM i.MX31 clk: add pll_ref_clk and MCU PLL bypass select   Alexander Kurz
• [PATCH] ARM i.MX31 clk: add pll_ref_clk and MCU PLL bypass select   Sascha Hauer
• [PATCH] ARM i.MX31 iomux: add and sort GPIO MUX options   Alexander Kurz
• [PATCH] ARM i.MX31 iomux: add and sort GPIO MUX options   Sascha Hauer
• [PATCH] ata/ahci: simplify ahci_read_id   Sascha Hauer
• [PATCH] ata: ide-sff: don't call free for ide_port in error path   Sascha Hauer
• [PATCH] ata: ide-sff: don't call free for ide_port in error path   Sascha Hauer
• [PATCH] ata: new driver to support the internal sata controller on Armada-XP   Uwe Kleine-König
• [PATCH] ata: new driver to support the internal sata controller on Armada-XP   Peter Mamonov
• [PATCH] ata: pata-imx: simplify assignment of device name   Sascha Hauer
• [PATCH] ata: pata-imx: simplify assignment of device name   Sascha Hauer
• [PATCH] ata: pata-imx: simplify assignment of device name   Uwe Kleine-König
• [PATCH] bootchooser: fix help message   Jan Luebbe
• [PATCH] bootchooser: fix help message   Sascha Hauer
• [PATCH] bootm: fix magicvar name for global_bootm_verbose   Enrico Jorns
• [PATCH] bootm: fix magicvar name for global_bootm_verbose   Sascha Hauer
• [PATCH] da9053: add dt_ids to be probed by devicetree   Sascha Hauer
• [PATCH] da9053: reset FAULTLOG after read   Sascha Hauer
• [PATCH] i.MX: vf610: Add support for ZII VF610 Dev Family   Andrey Smirnov
• [PATCH] i.MX: vf610: Add support for ZII VF610 Dev Family   Sascha Hauer
• [PATCH] i.MX: vf610: Add support for ZII VF610 Dev Family   Andrey Smirnov
• [PATCH] i.MX: vf610: Add support for ZII VF610 Dev Family   Sascha Hauer
• [PATCH] lib: libfile: Fix copying files to a non existing destination   Teresa Remmet
• [PATCH] lib: libfile: Fix copying files to a non existing destination   Sascha Hauer
• [PATCH] MIPS: drop redundant debug_ll_outhexw macro defines   Antony Pavlov
• [PATCH] MIPS: drop redundant debug_ll_outhexw macro defines   Sascha Hauer
• [PATCH] mtd: nand_mxs: fix NAND error when change clk rate   Sascha Hauer
• [PATCH] mtd: spi-nor: add support for s25fl208k   Peter Mamonov
• [PATCH] mtd: spi-nor: add support for s25fl208k   Sascha Hauer
• [PATCH] of: base: add chosen node if it does not exist when adding initrd   Sascha Hauer
• [PATCH] of_path: only handle no driver for device if it is on a bus   Ian Abbott
• [PATCH] of_path: only handle no driver for device if it is on a bus   Sascha Hauer
• [PATCH] of_path: only handle no driver for device if it is on a bus   Ian Abbott
• [PATCH] scripts/omap4_usbboot: use libusb   Vicente Bergas
• [PATCH] scripts/omap4_usbboot: use libusb   Sascha Hauer
• [PATCH] scripts: mxsimage: Fix build with OpenSSL 1.1.x   Sascha Hauer
• [PATCH] scripts: mxsimage: Fix build with OpenSSL < 1.1.x   Sascha Hauer
• [PATCH] spi: i.MX: Add driver for DSPI   Andrey Smirnov
• [PATCH] spi: i.MX: Add driver for DSPI   Sascha Hauer
• [PATCH] spi: i.MX: Add driver for DSPI   Andrey Smirnov
• [PATCH] usb: ehci: pass full speed devices to companion controller   Peter Mamonov
• [PATCH] usb: ehci: pass full speed devices to companion controller   Sascha Hauer
• [PATCH] USB: host: hub: increase delay after device removal   Sascha Hauer
• [PATCH] video: tc358767: add copyright lines   Andrey Gusakov
• [PATCH] video: tc358767: add copyright lines   Sascha Hauer
• [PATCH RESEND] gpio: gpio-74164: Add 74lvc594 ID   Sascha Hauer
• [PATCH v1 0/7] net/phy: marvell: add support for 88e1510   Uwe Kleine-König
• [PATCH v1 0/7] net/phy: marvell: add support for 88e1510   Sascha Hauer
• [PATCH v1 1/7] net/phy: marvell: rename 88E1545 to 88E1540   Uwe Kleine-König
• [PATCH v1 2/7] net/phy: marvell: 88E1540 LED registers already exist on 88E1121   Uwe Kleine-König
• [PATCH v1 3/7] net/phy: marvell: rename phy_driver array to match Linux driver   Uwe Kleine-König
• [PATCH v1 4/7] net/phy: marvell: change spacing to be more similar to the Linux driver   Uwe Kleine-König
• [PATCH v1 5/7] net/phy: marvell: align definition of MII_88E1121_PHY_MSCR to Linux driver   Uwe Kleine-König
• [PATCH v1 6/7] net/phy: marvell: improve config_aneg for 88E1121R and 88E1318S   Uwe Kleine-König
• [PATCH v1 7/7] net/phy: marvell: add support for 88e1510 to marvell phy driver   Uwe Kleine-König
• [PATCH v2 03/21] i.MX: ocotp: Simplify MAC address storing logic   Sascha Hauer
• [PATCH v2 03/21] i.MX: ocotp: Simplify MAC address storing logic   Sascha Hauer
• [PATCH v2 03/21] i.MX: ocotp: Simplify MAC address storing logic   Andrey Smirnov
• [PATCH v2 1/2] of: provide for_each_matching_node_from   Uwe Kleine-König
• [PATCH v2 1/2] of: provide for_each_matching_node_from   Sascha Hauer
• [PATCH v2 12/21] i.MX: iomuxv3: Add helper type to deconstruct iomux_v3_cfg_t values   Sascha Hauer
• [PATCH v2 12/21] i.MX: iomuxv3: Add helper type to deconstruct iomux_v3_cfg_t values   Andrey Smirnov
• [PATCH v2 19/21] i.MX: Default CONFI_USB_IMX_PHY to 'y' on Vybrid   Sascha Hauer
• [PATCH v2 19/21] i.MX: Default CONFI_USB_IMX_PHY to 'y' on Vybrid   Andrey Smirnov
• [PATCH v2] ARM: i.MX7: add AIPS base address defines   Alexander Kurz
• [PATCH v2] ARM: i.MX7: add AIPS base address defines   Sascha Hauer
• [PATCH v2] ARM i.MX31 clk: add pll_ref_clk and MCU PLL bypass select   Alexander Kurz
• [PATCH v2] ARM i.MX31 clk: add pll_ref_clk and MCU PLL bypass select   Sascha Hauer
• [patch v2] i.MX7 support   Sascha Hauer
• [PATCH v2] lib: libfile: Fix copying files to a non existing destination   Teresa Remmet
• [PATCH v2] lib: libfile: Fix copying files to a non existing destination   Sascha Hauer
• [PATCH v2] spi: i.MX: Add driver for DSPI   Andrey Smirnov
• [PATCH v2] spi: i.MX: Add driver for DSPI   Sascha Hauer
• [PATCH v3 00/20] Vybrid related patches   Andrey Smirnov
• [PATCH v3 00/20] Vybrid related patches   Sascha Hauer
• [PATCH v3 01/20] i.MX: esdhc: Enable host->clk during initialization   Andrey Smirnov
• [PATCH v3 02/20] i.MX: ocotp: Move memory reversing into a subroutine   Andrey Smirnov
• [PATCH v3 03/20] i.MX: ocotp: Add provisions for storing multiple MAC addresses   Andrey Smirnov
• [PATCH v3 04/20] i.MX: ocotp: Initialize OCOTP as early as possible   Andrey Smirnov
• [PATCH v3 05/20] i.MX: clk: Add IMX_PLLV3_SYS_VF610 subtype   Andrey Smirnov
• [PATCH v3 06/20] i.MX: ocotp: Add imx_ocotp_sense_enable()   Andrey Smirnov
• [PATCH v3 07/20] i.MX: imx6-fusemap: Fix SJC_RESP_LOCK width   Andrey Smirnov
• [PATCH v3 08/20] i.MX: Add fusemap for VF610   Andrey Smirnov
• [PATCH v3 09/20] i.MX: vf610: Ramp CPU clock to maximum frequency   Andrey Smirnov
• [PATCH v3 10/20] i.MX: iomuxv3: Add low-level pad code to headers   Andrey Smirnov
• [PATCH v3 11/20] i.MX: iomuxv3: Add helper macros to deconstruct iomux_v3_cfg_t values   Andrey Smirnov
• [PATCH v3 12/20] i.MX: iomuxv3: Add low-level pad configuration routine   Andrey Smirnov
• [PATCH v3 13/20] i.MX6: sabresd: Remove magic numbers in setup_uart   Andrey Smirnov
• [PATCH v3 14/20] i.MX: iomuxv3: Use helper functions in iomux-v3.h   Andrey Smirnov
• [PATCH v3 15/20] i.MX: vf610: Add low-level pin configuration helper   Andrey Smirnov
• [PATCH v3 16/20] i.MX: iomux-vf610: Add missing pad definitions   Andrey Smirnov
• [PATCH v3 17/20] i.MX: imx-usb-phy: Add VF610 OF compatiblity string   Andrey Smirnov
• [PATCH v3 18/20] i.MX: Default CONFIG_USB_IMX_PHY to 'y' on Vybrid   Andrey Smirnov
• [PATCH v3 19/20] i.MX: imx-usb-misc: Add Vybrid support   Andrey Smirnov
• [PATCH v3 20/20] i.MX: vf610-twr: Remove MSCM setup code   Andrey Smirnov
• Accessing non-volatile variables from Linux   Frank Hunleth
• Accessing non-volatile variables from Linux   Trent Piepho
• Accessing non-volatile variables from Linux   Sascha Hauer
• Accessing non-volatile variables from Linux   Frank Hunleth
• How to configure Imx6ul watchdog from barebox   Haris Papadopoulos
• How to configure Imx6ul watchdog from barebox   Sascha Hauer
• How to renew eth0 settings without doing a reset   Haris Papadopoulos
• How to renew eth0 settings without doing a reset   Ian Abbott
• How to renew eth0 settings without doing a reset   Uwe Kleine-König
• i.MX7 support   Sascha Hauer
• i.MX7 support   Fabio Estevam
• i.MX7 support   Belisko Marek
• i.MX7 support   Robert Schwebel
• i.MX7 support   Belisko Marek
• i.MX7 support   Sascha Hauer
• i.MX7 support   Fabio Estevam
• i.MX7 support   Sascha Hauer
• i.MX7 support   Fabio Estevam
• i.MX7 support   Sascha Hauer
• i.MX7 support   Fabio Estevam
• i.MX7 support   Sascha Hauer
• i.MX7 support   Fabio Estevam
• No release for December   Sascha Hauer
• No release for December   gianluca
• Problem loading environment from spi-nor flash partition since barebox 2017.01.0   Ian Abbott
• Problem loading environment from spi-nor flash partition since barebox 2017.01.0   Trent Piepho
• Problem loading environment from spi-nor flash partition since barebox 2017.01.0   Sascha Hauer
• Problem loading environment from spi-nor flash partition since barebox 2017.01.0   Ian Abbott
• Problem loading environment from spi-nor flash partition since barebox 2017.01.0   Ian Abbott
• Problem loading environment from spi-nor flash partition since barebox 2017.01.0   Trent Piepho
• Problem loading environment from spi-nor flash partition since barebox 2017.01.0   s.hauer at pengutronix.de
• scripts/checkpatch.pl is deprecated   Vicente Bergas
• scripts/checkpatch.pl is deprecated   Uwe Kleine-König
• scripts/checkpatch.pl is deprecated   Ian Abbott
• scripts/checkpatch.pl is deprecated   Vicente Bergas
• scripts/checkpatch.pl is deprecated   Vicente Bergas
• scripts/checkpatch.pl is deprecated   Sascha Hauer
• scripts/checkpatch.pl is deprecated   Vicente Bergas
• scripts/checkpatch.pl is deprecated   Sascha Hauer
• Secure trusted boot mechanism   Dold, Wolfram
• Secure trusted boot mechanism   Sascha Hauer
• Secure trusted boot mechanism   Dold, Wolfram
• Secure trusted boot mechanism   Sascha Hauer
• tftp get and last ack hanlding   Yegor Yefremov
• tftp get and last ack hanlding   Yegor Yefremov
• tftp get and last ack hanlding   Sascha Hauer
• v2017.01.0   Sascha Hauer

Last message date: Tue Jan 31 23:18:12 PST 2017
Archived on: Tue Jan 31 23:18:38 PST 2017

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...