August 2011 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Wed Aug 3 11:55:07 EDT 2011
Ending: Wed Aug 31 17:36:21 EDT 2011
Messages: 255

• 4331 support   James Anslow
• 4331 support   James Anslow
• [wireless-next][PATCH 0/3][ANNOUNCE] b43 the first Linux driver supporting HT-PHY (BCM4331)!   James Anslow
• [wireless-next][PATCH 0/3][ANNOUNCE] b43 the first Linux driver supporting HT-PHY (BCM4331)!   James Anslow
• [wireless-next][PATCH 0/3][ANNOUNCE] b43 the first Linux driver supporting HT-PHY (BCM4331)!   James Anslow
• [wireless-next][PATCH 0/3][ANNOUNCE] b43 the first Linux driver supporting HT-PHY (BCM4331)!   James Anslow
• [Bug]No probe response from after 500ms, disconnecting.   James Anslow
• [PATCH] b43: warn when forcing PIO mode   Gregory Bellier
• [PATCH 1/2] ssb: fix DMA translation for some specific boards   Johannes Berg
• ~3.1-rc1 mac80211 regression? NULL pointer dereference, memcpy, nla_put   Johannes Berg
• [PATCH 2/2] b43: fix DMA on some bugged hardware   Michael Büsch
• [PATCH 1/2] ssb: fix DMA translation for some specific boards   Michael Büsch
• [PATCH 1/2] ssb: fix DMA translation for some specific boards   Michael Büsch
• [PATCH 2/2] b43: fix DMA on some bugged hardware   Michael Büsch
• [PATCH 2/2] b43: fix DMA on some bugged hardware   Michael Büsch
• [RFC][RFT][PATCH V2 2/2] b43: fix DMA on some bugged hardware   Michael Büsch
• [PATCH 4/3] b43: support new RX header, noticed to be used in 598.314+ fw   Michael Büsch
• [PATCH 4/3] b43: support new RX header, noticed to be used in 598.314+ fw   Michael Büsch
• [PATCH] b43: Mask out unwanted bits of RX slot address   Michael Büsch
• [PATCH] b43: Mask out unwanted bits of RX slot address   Michael Büsch
• [PATCH] b43: Mask out unwanted bits of RX slot address   Michael Büsch
• [PATCH V2 3.2 2/2] b43: fix DMA on some bugged hardware   Michael Büsch
• [PATCH] b43-fwcutter: Add 5 new drivers to cut list   Michael Büsch
• [[PATCH V3] b43-fwcutter: Add 5 new drivers to cut list   Michael Büsch
• [PATCH] b43/legacy: Remove firmware IDs   Michael Büsch
• [RFT][PATCH] b43: use 8K buffers for 64-bit DMA to workaround hardware bug   Michael Büsch
• [RFC][PATCH V2] b43: drop Kconfig option of forcing PIO mode   Michael Büsch
• [RFC/RFT] b43: Relax requirement for descriptors to be in the DMA zone   Michael Büsch
• [RFC/RFT] b43: Relax requirement for descriptors to be in the DMA zone   Michael Büsch
• [wireless-next][PATCH 0/3][ANNOUNCE] b43 the first Linux driver supporting HT-PHY (BCM4331)!   Michael Büsch
• BCM4321 support   Michael Büsch
• [RFC][RFT][PATCH V2 2/2] b43: fix DMA on some bugged hardware   Larry Finger
• [PATCH 3/3] b43: support new TX header, noticed to be used by 598.314+ fw   Larry Finger
• [PATCH V2 4/4] b43: HT-PHY: init: init BPHY and upload 0x1a table   Larry Finger
• [PATCH V2 4/4] b43: HT-PHY: init: init BPHY and upload 0x1a table   Larry Finger
• [PATCH] Fix alignment issues with DMA TX on BCM4331   Larry Finger
• [PATCH] Fix alignment issues with DMA TX on BCM4331   Larry Finger
• [RFC][RFT][PATCH V2 2/2] b43: fix DMA on some bugged hardware   Larry Finger
• [PATCH] Fix alignment issues with DMA TX on BCM4331   Larry Finger
• Questions about firmware   Larry Finger
• Questions about firmware   Larry Finger
• Questions about firmware   Larry Finger
• Hosting wl driver, part of GPL package   Larry Finger
• [PATCH V2] b43: warn when forcing PIO mode   Larry Finger
• [PATCH] b43-fwcutter: Add 5 new drivers to cut list   Larry Finger
• [PATCH V2] b43-fwcutter: Add 5 new drivers to cut list   Larry Finger
• [[PATCH V3] b43-fwcutter: Add 5 new drivers to cut list   Larry Finger
• [PATCH V2] b43-fwcutter: Add 5 new drivers to cut list   Larry Finger
• [PATCH] b43/legacy: Remove firmware IDs   Larry Finger
• [QUESTION] 4331 support   Larry Finger
• [PATCH] b43: HT-PHY: allow writing longer tables with a single call   Larry Finger
• [RFT][PATCH] b43: use 8K buffers for 64-bit DMA to workaround hardware bug   Larry Finger
• [RFC/RFT] b43: Relax requirement for descriptors to be in the DMA zone   Larry Finger
• [RFC/RFT] b43: Relax requirement for descriptors to be in the DMA zone   Larry Finger
• [RFC/RFT] b43: Relax requirement for descriptors to be in the DMA zone   Larry Finger
• 4331 support   Larry Finger
• 4331 support   Larry Finger
• 4331 support   Larry Finger
• 4331 support   Larry Finger
• 4331 support   Larry Finger
• 4331 support   Larry Finger
• [wireless-next][PATCH 0/3][ANNOUNCE] b43 the first Linux driver supporting HT-PHY (BCM4331)!   Larry Finger
• [PATCH 1/2] ssb: use u16 for storing board rev   Larry Finger
• [PATCH 2/2] bcma: extract some basic info about board from SPROM   Larry Finger
• BCM4321 support   Larry Finger
• BCM4321 support   Larry Finger
• Looking for BCM43228   Larry Finger
• Looking for BCM43228   Larry Finger
• Looking for BCM43228   Larry Finger
• [RFC][RFT][PATCH V2 2/2] b43: fix DMA on some bugged hardware   John W. Linville
• [PATCH] b43: HT-PHY: init: add missing small-tables writes   John W. Linville
• [RFC][PATCH] b43: HT-PHY: allow writing longer tables with a single call   John W. Linville
• [RFC][PATCH V2] b43: drop Kconfig option of forcing PIO mode   John W. Linville
• bcm4312   Stuart Longland
• 4331 support   Stuart Longland
• [PATCH 06/11] bcma: add serial console support   Hauke Mehrtens
• [PATCH 1/2] ssb: fix DMA translation for some specific boards   Rafał Miłecki
• [PATCH 2/2] b43: fix DMA on some bugged hardware   Rafał Miłecki
• [PATCH 1/2] ssb: fix DMA translation for some specific boards   Rafał Miłecki
• [PATCH 2/2] b43: fix DMA on some bugged hardware   Rafał Miłecki
• [PATCH 2/2] b43: fix DMA on some bugged hardware   Rafał Miłecki
• [RFC][RFT][PATCH V2 1/2] ssb: fix DMA translation for some specific boards   Rafał Miłecki
• [RFC][RFT][PATCH V2 2/2] b43: fix DMA on some bugged hardware   Rafał Miłecki
• [RFC][RFT][PATCH V2 2/2] b43: fix DMA on some bugged hardware   Rafał Miłecki
• [RFC][RFT][PATCH V2 2/2] b43: fix DMA on some bugged hardware   Rafał Miłecki
• [PATCH] bcma: implement BCM4331 workaround for external PA lines   Rafał Miłecki
• [PATCH 1/3] b43: rename TX header formats   Rafał Miłecki
• [PATCH 2/3] b43: use enum for firmware header format   Rafał Miłecki
• [PATCH 3/3] b43: support new TX header, noticed to be used by 598.314+ fw   Rafał Miłecki
• [PATCH 4/3] b43: support new RX header, noticed to be used in 598.314+ fw   Rafał Miłecki
• [PATCH 4/3] b43: support new RX header, noticed to be used in 598.314+ fw   Rafał Miłecki
• [PATCH 4/3] b43: support new RX header, noticed to be used in 598.314+ fw   Rafał Miłecki
• [PATCH 4/3 V2] b43: support new RX header, noticed to be used in 598.314+ fw   Rafał Miłecki
• [RFC][RFT][PATCH V2 2/2] b43: fix DMA on some bugged hardware   Rafał Miłecki
• [RFC][RFT][PATCH V2 2/2] b43: fix DMA on some bugged hardware   Rafał Miłecki
• [PATCH V2] bcma: implement BCM4331 workaround for external PA lines   Rafał Miłecki
• [PATCH 1/2] b43: include HT-PHY in some common code   Rafał Miłecki
• [PATCH 2/2] b43: make forcing clock common (HT-PHY also uses that)   Rafał Miłecki
• [RFC][PATCH] b43: HT-PHY: allow writing longer tables with a single call   Rafał Miłecki
• [PATCH 1/4] b43: HT-PHY: init: zero EXTG registers   Rafał Miłecki
• [PATCH 2/4] b43: HT-PHY: init: implement few simple PHY writes   Rafał Miłecki
• [PATCH 3/4] b43: HT-PHY: init: copy tables and reset CCA   Rafał Miłecki
• [PATCH 4/4] b43: HT-PHY: init: init BPHY and upload 0x1a table   Rafał Miłecki
• [PATCH V2 4/4] b43: HT-PHY: init: init BPHY and upload 0x1a table   Rafał Miłecki
• [PATCH V2 4/4] b43: HT-PHY: init: init BPHY and upload 0x1a table   Rafał Miłecki
• [PATCH 1/2] b43: HT-PHY: init: add missing PHY mask/set ops   Rafał Miłecki
• [PATCH 2/2] b43: HT-PHY: init: add some AFE (Analog Frontend) operation   Rafał Miłecki
• Hosting wl driver, part of GPL package   Rafał Miłecki
• [PATCH] b43: HT-PHY: init: add missing small-tables writes   Rafał Miłecki
• [PATCH] Fix alignment issues with DMA TX on BCM4331   Rafał Miłecki
• [PATCH] b43: Mask out unwanted bits of RX slot address   Rafał Miłecki
• [PATCH] Fix alignment issues with DMA TX on BCM4331   Rafał Miłecki
• [PATCH] Fix alignment issues with DMA TX on BCM4331   Rafał Miłecki
• [PATCH] Fix alignment issues with DMA TX on BCM4331   Rafał Miłecki
• [PATCH] b43: Mask out unwanted bits of RX slot address   Rafał Miłecki
• [PATCH] Fix alignment issues with DMA TX on BCM4331   Rafał Miłecki
• [PATCH] Fix alignment issues with DMA TX on BCM4331   Rafał Miłecki
• [PATCH] Fix alignment issues with DMA TX on BCM4331   Rafał Miłecki
• [PATCH] Fix alignment issues with DMA TX on BCM4331   Rafał Miłecki
• [PATCH] b43: Mask out unwanted bits of RX slot address   Rafał Miłecki
• [PATCH] b43: Mask out unwanted bits of RX slot address   Rafał Miłecki
• [PATCH] b43: Mask out unwanted bits of RX slot address   Rafał Miłecki
• [PATCH] b43: Mask out unwanted bits of RX slot address   Rafał Miłecki
• [PATCH] b43: Mask out unwanted bits of RX slot address   Rafał Miłecki
• b43 error under heavy load   Rafał Miłecki
• b43 error under heavy load   Rafał Miłecki
• [PATCH] b43: Mask out unwanted bits of RX slot address   Rafał Miłecki
• [PATCH] b43: Mask out unwanted bits of RX slot address   Rafał Miłecki
• [PATCH] b43: Mask out unwanted bits of RX slot address   Rafał Miłecki
• [PATCH] b43: Mask out unwanted bits of RX slot address   Rafał Miłecki
• [PATCH] b43: Mask out unwanted bits of RX slot address   Rafał Miłecki
• [PATCH V2 3.2 2/2] b43: fix DMA on some bugged hardware   Rafał Miłecki
• [PATCH RESEND 3.2 1/2] ssb: fix DMA translation for some specific boards   Rafał Miłecki
• [PATCH V2 3.2 2/2] b43: fix DMA on some bugged hardware   Rafał Miłecki
• [PATCH V3 3.2 2/2] b43: fix DMA on some bugged hardware   Rafał Miłecki
• Questions about firmware   Rafał Miłecki
• Questions about firmware   Rafał Miłecki
• Questions about firmware   Rafał Miłecki
• b43 error under heavy load   Rafał Miłecki
• [PATCH 1/3] b43: LCN-PHY: add very basic PHY ops   Rafał Miłecki
• [PATCH 2/3] b43: LCN-PHY: implement disabling radio   Rafał Miłecki
• [PATCH 3/3] b43: LCN-PHY: switch analog   Rafał Miłecki
• [PATCH 4/3] b43: LCN-PHY: add init tables   Rafał Miłecki
• [PATCH 2/3] b43: LCN-PHY: implement disabling radio   Rafał Miłecki
• [PATCH 1/2] b43: LCN-PHY: basic PHY init   Rafał Miłecki
• [PATCH 2/2] b43: LCN-PHY: init 0x2064 radio   Rafał Miłecki
• Hosting wl driver, part of GPL package   Rafał Miłecki
• [PATCH] b43: warn when forcing PIO mode   Rafał Miłecki
• [RFC][PATCH] b43: drop Kconfig option of forcing PIO mode   Rafał Miłecki
• [RFC][PATCH V2] b43: drop Kconfig option of forcing PIO mode   Rafał Miłecki
• [PATCH V2] b43: warn when forcing PIO mode   Rafał Miłecki
• Question about versions: wl vs. brcmsmac   Rafał Miłecki
• ~3.1-rc1 mac80211 regression? NULL pointer dereference, memcpy, nla_put   Rafał Miłecki
• Report on bcma with 14e4:4353 (BCM43224)   Rafał Miłecki
• [PATCH] Add uevent to bcma bus, to autoload drivers.   Rafał Miłecki
• [PATCH] Add uevent to bcma bus, to autoload drivers.   Rafał Miłecki
• [PATCH 3.1] bcma: add uevent to the bus, to autoload drivers   Rafał Miłecki
• [PATCH] Add uevent to bcma bus, to autoload drivers.   Rafał Miłecki
• [QUESTION] 4331 support   Rafał Miłecki
• [PATCH] b43: HT-PHY: init: add missing small-tables writes   Rafał Miłecki
• [RFC][PATCH] b43: HT-PHY: allow writing longer tables with a single call   Rafał Miłecki
• [PATCH] b43: HT-PHY: init: add missing small-tables writes   Rafał Miłecki
• [PATCH] b43: HT-PHY: allow writing longer tables with a single call   Rafał Miłecki
• [PATCH 1/2] b43: HT-PHY: use separated function for forcing RF sequence   Rafał Miłecki
• [PATCH 2/2] b43: HT-PHY: read clip state   Rafał Miłecki
• [RFT][PATCH] b43: use 8K buffers for 64-bit DMA to workaround hardware bug   Rafał Miłecki
• BCM4321 support   Rafał Miłecki
• [RFC/RFT] b43: Relax requirement for descriptors to be in the DMA zone   Rafał Miłecki
• BCM4321 support   Rafał Miłecki
• [RFC][PATCH V2] b43: drop Kconfig option of forcing PIO mode   Rafał Miłecki
• [RFC/RFT] b43: Relax requirement for descriptors to be in the DMA zone   Rafał Miłecki
• [RFC/RFT] b43: Relax requirement for descriptors to be in the DMA zone   Rafał Miłecki
• [wireless-next][PATCH 0/3][ANNOUNCE] b43 the first Linux driver supporting HT-PHY (BCM4331)!   Rafał Miłecki
• [wireless-next][PATCH 1/3] b43: Relax requirement for descriptors to be in the DMA zone   Rafał Miłecki
• [wireless-next][PATCH 2/3] b43: use 8K buffers for 64-bit DMA to workaround hardware bug   Rafał Miłecki
• [wireless-next][PATCH 3/3] b43: make HT-PHY support experimental   Rafał Miłecki
• Degradation on b43 14e4:4315 ?   Rafał Miłecki
• [Bug]No probe response from after 500ms, disconnecting.   Rafał Miłecki
• [wireless-next][PATCH 0/3][ANNOUNCE] b43 the first Linux driver supporting HT-PHY (BCM4331)!   Rafał Miłecki
• [wireless-next][PATCH 0/3][ANNOUNCE] b43 the first Linux driver supporting HT-PHY (BCM4331)!   Rafał Miłecki
• [wireless-next][PATCH 0/3][ANNOUNCE] b43 the first Linux driver supporting HT-PHY (BCM4331)!   Rafał Miłecki
• [Bug]No probe response from after 500ms, disconnecting.   Rafał Miłecki
• [Bug]No probe response from after 500ms, disconnecting.   Rafał Miłecki
• [PATCH 1/3] b43: LCN-PHY: add R/W ops for PHY and radio   Rafał Miłecki
• [PATCH 2/3] b43: LCN-PHY: implement more PHY ops before radio init   Rafał Miłecki
• [PATCH 3/3] b43: LCN-PHY: prepare functions for channel switching   Rafał Miłecki
• [PATCH V2 3/3] b43: LCN-PHY: prepare functions for channel switching   Rafał Miłecki
• [PATCH 1/2] ssb: use u16 for storing board rev   Rafał Miłecki
• [PATCH 2/2] bcma: extract some basic info about board from SPROM   Rafał Miłecki
• [PATCH 2/2] bcma: extract some basic info about board from SPROM   Rafał Miłecki
• [ONE MORE][PATCH 4/3] b43: LCN-PHY: implement saving and restoring PHY & radio configuration   Rafał Miłecki
• Looking for BCM43228   Rafał Miłecki
• Looking for BCM43228   Rafał Miłecki
• Looking for BCM43228   Rafał Miłecki
• Looking for BCM43228   Rafał Miłecki
• Looking for BCM43228   Rafał Miłecki
• Looking for BCM43228   Rafał Miłecki
• [PATCH 1/6] b43: LCN-PHY: minor fixes   Rafał Miłecki
• [PATCH 2/6] b43: LCN-PHY: put tables functions in correct file   Rafał Miłecki
• [PATCH 3/6] b43: LCN-PHY: rewrite 0x7 table at the end of init   Rafał Miłecki
• [PATCH 4/6] b43: LCN-PHY: upload additional 0x7 table   Rafał Miłecki
• [PATCH 5/6] b43: LCN-PHY: rename functions, get rid of magic names   Rafał Miłecki
• [PATCH 6/6] b43: LCN-PHY: add conditions for few operations   Rafał Miłecki
• BCM4321 support   Nicolas de Pesloüan
• BCM4321 support   Nicolas de Pesloüan
• [PATCH 2/3] b43: LCN-PHY: implement disabling radio   Gábor Stefanik
• [PATCH V2] b43-fwcutter: Add 5 new drivers to cut list   Gábor Stefanik
• BCM4321 support   Gábor Stefanik
• [PATCH 1/2] b43legacy: report core number   Kalle Valo
• [PATCH] b43: HT-PHY: init: add missing small-tables writes   Kalle Valo
• [QUESTION] 4331 support   Kalle Valo
• [QUESTION] 4331 support   Kalle Valo
• [QUESTION] 4331 support   Maxime Vincent
• [QUESTION] 4331 support   Maxime Vincent
• b43 error under heavy load   Chris Vine
• b43 error under heavy load   Chris Vine
• BCM4321 support   Octavian Voicu
• BCM4321 support   Octavian Voicu
• BCM4321 support   Octavian Voicu
• BCM4321 support   Octavian Voicu
• BCM4321 support   Octavian Voicu
• BCM4321 support   Octavian Voicu
• BCM4321 support   Octavian Voicu
• No DMA RX on some BCM4321, on BCM43224 and BCM43225   David Woodhouse
• [PATCH] b43: Mask out unwanted bits of RX slot address   David Woodhouse
• [PATCH] Fix alignment issues with DMA TX on BCM4331   David Woodhouse
• [PATCH] Fix alignment issues with DMA TX on BCM4331   David Woodhouse
• [PATCH] Fix alignment issues with DMA TX on BCM4331   David Woodhouse
• [PATCH] Fix alignment issues with DMA TX on BCM4331   David Woodhouse
• [PATCH] Fix alignment issues with DMA TX on BCM4331   David Woodhouse
• [PATCH] Fix alignment issues with DMA TX on BCM4331   David Woodhouse
• [PATCH] b43: Mask out unwanted bits of RX slot address   David Woodhouse
• [PATCH] Fix alignment issues with DMA TX on BCM4331   David Woodhouse
• [PATCH] b43: Mask out unwanted bits of RX slot address   David Woodhouse
• [PATCH] b43: Mask out unwanted bits of RX slot address   David Woodhouse
• [PATCH] b43: Mask out unwanted bits of RX slot address   David Woodhouse
• [PATCH 2/3] b43: LCN-PHY: implement disabling radio   David Woodhouse
• Hosting wl driver, part of GPL package   David Woodhouse
• Hosting wl driver, part of GPL package   David Woodhouse
• [PATCH] Add uevent to bcma bus, to autoload drivers.   David Woodhouse
• [PATCH] Add uevent to bcma bus, to autoload drivers.   David Woodhouse
• [PATCH] Add uevent to bcma bus, to autoload drivers.   David Woodhouse
• [PATCH V2] b43-fwcutter: Add 5 new drivers to cut list   David Woodhouse
• [QUESTION] 4331 support   David Woodhouse
• [QUESTION] 4331 support   David Woodhouse
• [PATCH] b43: HT-PHY: init: add missing small-tables writes   David Woodhouse
• [PATCH] b43: HT-PHY: init: add missing small-tables writes   David Woodhouse
• [RFT][PATCH] b43: use 8K buffers for 64-bit DMA to workaround hardware bug   David Woodhouse
• [QUESTION] 4331 support   David Woodhouse
• [QUESTION] 4331 support   David Woodhouse
• bcm4312   bendney
• 4331 support   james at jamesanslow.net
• 4331 support   james at jamesanslow.net
• 4331 support   james at jamesanslow.net
• 4331 support   james at jamesanslow.net

Last message date: Wed Aug 31 17:36:21 EDT 2011
Archived on: Wed Aug 31 17:36:39 EDT 2011

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...