July 2015 Archives by thread
Starting: Wed Jul 1 03:16:55 PDT 2015
Ending: Thu Jul 30 16:28:12 PDT 2015
Messages: 194
- [PATCH v2 1/8] ath10k: enhance swba event handler to adapt different size tim bitmap
Kalle Valo
- [PATCH v2 5/8] ath10k: add 10.4 fw specific htt msg definitions
Kalle Valo
- [ath6kl:pending 87/95] drivers/net/wireless/ath/ath10k/wmi.c:2898: warning: format '%d' expects type 'int', but argument 4 has type 'long unsigned int'
kbuild test robot
- [ath6kl:pending 87/95] drivers/net/wireless/ath/ath10k/wmi.c:2898:9: warning: format '%d' expects argument of type 'int', but argument 4 has type 'long unsigned int'
kbuild test robot
- ath10k on 4.9 band?
Ben Greear
- [PATCH v2 0/8] add beacon and htt msg support for 10.4 firmware
Kalle Valo
- ath10k: firmware crash after setting promiscous mode
"Jose Núñez-Martínez (CTTC)"
- Trying to upgrade to latest ath10k driver version
Amato Carbonara
- [PATCH] ath10k: Delay device access after cold reset
Vasanthakumar Thiagarajan
- Question on bssid mask with ath10k
"Jose Núñez-Martínez (CTTC)"
- [PATCH] ath10k: fix QCA61X4 boot up
Bartosz Markowski
- [PATCH] ath10k: Fix target to cpu address conversion logic
Vasanthakumar Thiagarajan
- Problems with item delivery, n.000902742
FedEx International Ground
- Buss Reset Problem
CACook at quantum-sci.com
- attempting mesh on ath10k
Freddy Lee
- [PATCH 0/3] ath10k: update data path to support QCA99X0
Peter Oh
- [PATCH] ath10k: Make fw stats prints specific to firmware version
Manikanta Pubbisetty
- [PATCH 1/2] ath10k: ensure pktlog disable cmd reaches fw before pdev suspend
Raja Mani
- [PATCH 0/6] ath10k: random fixes 2015-07-09
Michal Kazior
- Updated CT firmware uploaded.
Ben Greear
- How is AP supposed to handle power-save packets from peer?
Ben Greear
- [PATCH V2] ath10k: Delay device access after cold reset
Vasanthakumar Thiagarajan
- [ath6kl:pending 103/106] drivers/net/wireless/ath/ath10k/htt_tx.c:547:52: sparse: incorrect type in assignment (different base types)
kbuild test robot
- AP mode firmware crash on QCA9880-BR4A
Martin Blumenstingl
- Making 10.1.467 based CT firmware do mgt-over-htt
Ben Greear
- [PATCH v2 0/3] ath10k: update data path to support QCA99X0
Peter Oh
- CT firmware available with management-over-HTT
Ben Greear
- Don't enable PROMISC when adding AP to a bridge?
Ben Greear
- Disconnected due to excessive missing ACKs on Ath10k (OpenWRT Chaos Chalmer RC2)
Fernando S
- [PATCH v3 0/3] ath10k: update data path to support QCA99X0
Peter Oh
- [PATCH 1/1] ath10k: fixing wrong initialization of struct channel
Maninder Singh
- [PATCH] ath10k Suppress 'failed to process fft' warning messages.
Kevin Darbyshire-Bryant
- reading fw_stats: Connection timed out
Martin Hicks
- qca6174 hw2.1 firmware crash with kernel 4.1.2
Enrico Tagliavini
- ath10k list: problems with gmail
Kalle Valo
- [PATCH] Ath10k: Add TCP/UDP Checksum offload support for QCA99x0
c_mpubbi at qti.qualcomm.com
- [PATCH] ath10k: Support different txbf configuration schemes
Vivek Natarajan
- [PATCH] ath10k: Extend struct htt_mgmt_tx_dec for qca99x0
Raja Mani
- [PATCH 1/2] ath10k: Fix memory alloc failure in qca99x0 during wmi svc rdy event
Raja Mani
- [PATCH] ath10k: Add QCA99X0 to supported device list
Vasanthakumar Thiagarajan
- [PATCH] ath10k: suppress 'failed to process fft' warning messages.
Kevin Darbyshire-Bryant
- [PATCH v2] ath10k: Improve performance by reducing tx_lock contention.
Marty Faltesek
- QCA6174 hw2.1 on Clevo P750ZM
Alexandre Maloteaux
- [PATCH] ath10k: initialize msdu ext. descriptor before use
Peter Oh
- [PATCH v4] ath10k: enable raw encap mode and software crypto engine.
Kalle Valo
- [PATCH] ath10k: remove NULL ptr deref in variable init of ath10k_monitor_vdev_start
John W. Linville
- QCA6174 hw2.1 irq_mode=0 broken on 4.2-rc3, working on 4.1.2
Enrico Tagliavini
- QCA6174 hw2.1 irq_mode=0 broken on 4.2-rc3, working on 4.1.2
Michal Kazior
- QCA6174 hw2.1 irq_mode=0 broken on 4.2-rc3, working on 4.1.2
Enrico Tagliavini
- QCA6174 hw2.1 irq_mode=0 broken on 4.2-rc3, working on 4.1.2
Michal Kazior
- QCA6174 hw2.1 irq_mode=0 broken on 4.2-rc3, working on 4.1.2
Enrico Tagliavini
- QCA6174 hw2.1 irq_mode=0 broken on 4.2-rc3, working on 4.1.2
Alexandre Maloteaux
- QCA6174 hw2.1 irq_mode=0 broken on 4.2-rc3, working on 4.1.2
Enrico Tagliavini
- QCA6174 hw2.1 irq_mode=0 broken on 4.2-rc3, working on 4.1.2
Michal Kazior
- QCA6174 hw2.1 irq_mode=0 broken on 4.2-rc3, working on 4.1.2
Michal Kazior
- QCA6174 hw2.1 irq_mode=0 broken on 4.2-rc3, working on 4.1.2
Kalle Valo
- QCA6174 hw2.1 irq_mode=0 broken on 4.2-rc3, working on 4.1.2
Enrico Tagliavini
- QCA6174 hw2.1 irq_mode=0 broken on 4.2-rc3, working on 4.1.2
Kalle Valo
- QCA6174 hw2.1 irq_mode=0 broken on 4.2-rc3, working on 4.1.2
Enrico Tagliavini
- Monitor mode TX retry reporting
Jussi Haakana
- CT firmware available with management-over-HTT (tested)
Ben Greear
- [ath6kl:pending 20/20] drivers/net/wireless/ath/ath10k/debug.c:2045:16: error: 'ATH10K_FW_STATS_BUF_SIZE' undeclared
kbuild test robot
- [ath6kl:pending 37/39] drivers/net/wireless/ath/wil6210/pcie_bus.c:264:12: warning: 'wil6210_suspend' defined but not used
kbuild test robot
- ACK timeout in QCA99x0
Jack Wu 吳家慶 (58783)
Last message date:
Thu Jul 30 16:28:12 PDT 2015
Archived on: Thu Jul 30 16:28:41 PDT 2015
This archive was generated by
Pipermail 0.09 (Mailman edition).