Disconnected due to excessive missing ACKs on Ath10k (OpenWRT Chaos Chalmer RC2)

[Michal Kazior]

On 15 July 2015 at 21:31, Fernando S <fsclavo at gmail.com> wrote:
> Same suggestion was posted on Openwrt forum (disable
> disassoc_low_ack), I'll try it, do some stress test and come back with
> results.
>
> Here are two links to Openwrt forum threads related to this problem:
>
> https://forum.openwrt.org/viewtopic.php?id=43188
> https://forum.openwrt.org/viewtopic.php?pid=228738
>
> And two tickets with some more information:
>
> https://dev.openwrt.org/ticket/12372

This seems to be related to ANI. I guess you could try start the
ath10k AP and issue:

 echo 0 > /sys/kernel/debug/ieee80211/phy*/ath10k/ani_enable

You can check the current state of the setting by reading the file obviously.


> https://dev.openwrt.org/ticket/15464

This one is related to software A-MPDU support in ath9k. ath10k
offloads Tx aggregation to firmware so this bug doesn't really apply.


Michał