December 2017 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Fri Dec 1 00:34:17 PST 2017
Ending: Sun Dec 31 05:33:27 PST 2017
Messages: 311

• [PATCH v2] nvme-fc: don't require user to enter host_traddr   Johannes Thumshirn
  • [PATCH v2] nvme-fc: don't require user to enter host_traddr   James Smart
• [PATCHv2] nvme/fc: add 'discovery' sysfs attribute to fc transport device   Hannes Reinecke
  • [PATCHv2] nvme/fc: add 'discovery' sysfs attribute to fc transport device   James Smart
    • [PATCHv2] nvme/fc: add 'discovery' sysfs attribute to fc transport device   Hannes Reinecke
• [PATCH] nvme: set discard_alignment to zero   Jens Axboe
  • [PATCH] nvme: set discard_alignment to zero   Christoph Hellwig
• [PATCH] mpt3sas: Remove unused variable requeue_event   Suganath Prabu S
  • [PATCH] mpt3sas: Remove unused variable requeue_event   Martin K. Petersen
• [PATCH] nvme-pci: remove an unnecessary variable initialization in HMB code   Minwoo Im
  • [PATCH] nvme-pci: remove an unnecessary variable initialization in HMB code   Minwoo Im
    • [PATCH] nvme-pci: remove an unnecessary variable initialization in HMB code   Christoph Hellwig
      • [PATCH] nvme-pci: remove an unnecessary variable initialization in HMB code   Minwoo Im
• [PATCH v2 1/2] nvmetcli: Expose ls to dump UI configuration   Sagi Grimberg
  • [PATCH v2 2/2] nvmetcli: decorate namespace, subsystem and port UI   Sagi Grimberg
    • [PATCH v2 2/2] nvmetcli: decorate namespace, subsystem and port UI   Johannes Thumshirn
  • [PATCH v2 1/2] nvmetcli: Expose ls to dump UI configuration   Johannes Thumshirn
  • [PATCH v2 1/2] nvmetcli: Expose ls to dump UI configuration   Christoph Hellwig
• [PATCHv3] nvme/fc: add 'discovery' sysfs attribute to fc transport device   Hannes Reinecke
• [PATCH 1/2] nvmet: lower log level for each queue creation   Sagi Grimberg
  • [PATCH 2/2] nvmet-rdma: lowering log level for chatty debug messages   Sagi Grimberg
    • [PATCH 2/2] nvmet-rdma: lowering log level for chatty debug messages   Johannes Thumshirn
  • [PATCH 1/2] nvmet: lower log level for each queue creation   Johannes Thumshirn
  • [PATCH 1/2] nvmet: lower log level for each queue creation   Christoph Hellwig
• [PATCH rfc 0/2] Support read-only subsystem critical warning   Sagi Grimberg
  • [PATCH rfc 1/2] nvme: support smart read-only critical warning event   Sagi Grimberg
    • [PATCH rfc 1/2] nvme: support smart read-only critical warning event   Christoph Hellwig
      • [PATCH rfc 1/2] nvme: support smart read-only critical warning event   Sagi Grimberg
      • [PATCH rfc 1/2] nvme: support smart read-only critical warning event   Johannes Thumshirn
      • [PATCH rfc 1/2] nvme: support smart read-only critical warning event   Christoph Hellwig
      • [PATCH rfc 1/2] nvme: support smart read-only critical warning event   Sagi Grimberg
  • [PATCH rfc 2/2] nvmet: expose option to emulate a nvm subsystem in read-only mode   Sagi Grimberg
    • [PATCH rfc 2/2] nvmet: expose option to emulate a nvm subsystem in read-only mode   Christoph Hellwig
      • [PATCH rfc 2/2] nvmet: expose option to emulate a nvm subsystem in read-only mode   Sagi Grimberg
      • [PATCH rfc 2/2] nvmet: expose option to emulate a nvm subsystem in read-only mode   Christoph Hellwig
      • [PATCH rfc 2/2] nvmet: expose option to emulate a nvm subsystem in read-only mode   Sagi Grimberg
      • [PATCH rfc 2/2] nvmet: expose option to emulate a nvm subsystem in read-only mode   Christoph Hellwig
      • [PATCH rfc 2/2] nvmet: expose option to emulate a nvm subsystem in read-only mode   Sagi Grimberg
• [PATCH 0/2] nvme-cli: add options to set/get property of NVMf   Guan Junxiong
• [PATCH 1/2] nvme-cli: add support to get properties for NVMe over Fabric   Guan Junxiong
  • [PATCH 1/2] nvme-cli: add support to get properties for NVMe over Fabric   Minwoo Im
    • [PATCH 1/2] nvme-cli: add support to get properties for NVMe over Fabric   Guan Junxiong
• [PATCH 2/2] nvme-cli: support to set the property for NVMe over Fabric   Guan Junxiong
  • [PATCH 2/2] nvme-cli: support to set the property for NVMe over Fabric   Minwoo Im
• [PATCH] nvmet-rdma: removed queues cleanup from module exit   Christoph Hellwig
• [PATCH 0/4] nvme_fcloop: abort and isr context changes   Christoph Hellwig
• [PATCH] nvme_fc: remove double put reference if admin connect fails   Christoph Hellwig
• [PATCH] nvmet_fc: cleanup nvmet add_port/remove_port   Christoph Hellwig
• [PATCH] nvme-pci: remove an unnecessary initialization in HMB code   Minwoo Im
  • [PATCH] nvme-pci: remove an unnecessary initialization in HMB code   Christoph Hellwig
  • [PATCH] nvme-pci: remove an unnecessary initialization in HMB code   Minwoo Im
    • [PATCH] nvme-pci: remove an unnecessary initialization in HMB code   Minwoo Im
• "nvme0c1n1: detected capacity change from 0 to 268435456000" message in controller reset   Christoph Hellwig
  • "nvme0c1n1: detected capacity change from 0 to 268435456000" message in controller reset   Sagi Grimberg
• [PATCH 1/4] nvmet: Fix error flow in nvmet_alloc_ctrl()   Christoph Hellwig
• [PATCH 2/4] nvmet: Rearrange nvmet_ctrl_free()   Christoph Hellwig
• [PATCH 3/4] nvmet: Add controllers to configfs   Christoph Hellwig
• [PATCH 4/4] nvmet: Add feature close connection from target side   Christoph Hellwig
• When will Linux support new RAID controllers   David F.
  • When will Linux support new RAID controllers   Christoph Hellwig
  • When will Linux support new RAID controllers   Alan Cox
    • When will Linux support new RAID controllers   Dennis Mungai
      • When will Linux support new RAID controllers   David F.
• [PATCH] nvme-rdma: fix race between error-recovering and scanning   Guan Junxiong
• [PATCH] nvme-fc: Implement async-connect option   Hannes Reinecke
  • [PATCH] nvme-fc: Implement async-connect option   James Smart
    • [PATCH] nvme-fc: Implement async-connect option   Hannes Reinecke
• [PATCH] nvmetcli: port decoration coloring only if its enabled   Sagi Grimberg
  • [PATCH] nvmetcli: port decoration coloring only if its enabled   Johannes Thumshirn
  • [PATCH] nvmetcli: port decoration coloring only if its enabled   Christoph Hellwig
• [PATCH] nvme: nvme_remove should cancel the reset_work before setting the ctrl state   Thomas Tai
  • [PATCH] nvme: nvme_remove should cancel the reset_work before setting the ctrl state   Keith Busch
    • [PATCH] nvme: nvme_remove should cancel the reset_work before setting the ctrl state   Thomas Tai
• [PATCH] NVME: call blk_integrity_unregister after queue is cleaned up   Ming Lei
  • [PATCH] NVME: call blk_integrity_unregister after queue is cleaned up   Sagi Grimberg
  • [PATCH] NVME: call blk_integrity_unregister after queue is cleaned up   Christoph Hellwig
• [PATCH] nvmet: Limit num of queues to num of cpus on traget   Nitzan Carmi
  • [PATCH] nvmet: Limit num of queues to num of cpus on traget   Sagi Grimberg
    • [PATCH] nvmet: Limit num of queues to num of cpus on traget   Max Gurtovoy
      • [PATCH] nvmet: Limit num of queues to num of cpus on traget   Sagi Grimberg
      • [PATCH] nvmet: Limit num of queues to num of cpus on traget   Max Gurtovoy
• [PATCH 1/1] nvme-rdma: remove redundant boolean for inline_data   Max Gurtovoy
  • [PATCH 1/1] nvme-rdma: remove redundant boolean for inline_data   Sagi Grimberg
• [PATCH] Revert "nvme: allow controller RESETTING to RECONNECTING transition"   Nitzan Carmi
  • [PATCH] Revert "nvme: allow controller RESETTING to RECONNECTING transition"   Sagi Grimberg
    • [PATCH] Revert "nvme: allow controller RESETTING to RECONNECTING transition"   Max Gurtovoy
      • [PATCH] Revert "nvme: allow controller RESETTING to RECONNECTING transition"   James Smart
• BUG: NULL pointer at IP: blk_mq_map_swqueue+0xbc/0x200 on 4.15.0-rc2   Yi Zhang
  • BUG: NULL pointer at IP: blk_mq_map_swqueue+0xbc/0x200 on 4.15.0-rc2   Ming Lei
    • BUG: NULL pointer at IP: blk_mq_map_swqueue+0xbc/0x200 on 4.15.0-rc2   Yi Zhang
      • BUG: NULL pointer at IP: blk_mq_map_swqueue+0xbc/0x200 on 4.15.0-rc2   Ming Lei
    • BUG: NULL pointer at IP: blk_mq_map_swqueue+0xbc/0x200 on 4.15.0-rc2   Christoph Hellwig
      • BUG: NULL pointer at IP: blk_mq_map_swqueue+0xbc/0x200 on 4.15.0-rc2   Ming Lei
• AER reporting on NVME board   Yogi Wannabe
  • AER reporting on NVME board   Keith Busch
• Block Integrity Rq Count Question   Jeffrey Lien
  • Block Integrity Rq Count Question   Keith Busch
    • Block Integrity Rq Count Question   Jeffrey Lien
      • Block Integrity Rq Count Question   Keith Busch
  • Block Integrity Rq Count Question   Christoph Hellwig
    • Block Integrity Rq Count Question   Jeffrey Lien
    • Block Integrity Rq Count Question   Jeffrey Lien
• [v3,1/9] RDMA/core: Add implicit per-device completion queue pools   Jason Gunthorpe
• [PATCH] drviers/nvme/target: fix max dup length for kstrndup   Ma Shimiao
• [PATCH 0/6] blk-mq: fix race related with device deletion/reset/switching sched   Ming Lei
  • [PATCH 1/6] blk-mq: quiesce queue before freeing queue   Ming Lei
  • [PATCH 2/6] blk-mq: support concurrent blk_mq_quiesce_queue()   Ming Lei
  • [PATCH 3/6] blk-mq: quiesce queue during switching io sched and updating nr_requests   Ming Lei
  • [PATCH 4/6] blk-mq: avoid to map CPU into stale hw queue   Ming Lei
    • [PATCH 4/6] blk-mq: avoid to map CPU into stale hw queue   Christoph Hellwig
      • [PATCH 4/6] blk-mq: avoid to map CPU into stale hw queue   Ming Lei
  • [PATCH 5/6] blk-mq: fix race between updating nr_hw_queues and switching io sched   Ming Lei
  • [PATCH 6/6] nvme: remove .init_request callback   Ming Lei
    • [PATCH 6/6] nvme: remove .init_request callback   Christoph Hellwig
      • [PATCH 6/6] nvme: remove .init_request callback   Ming Lei
      • [PATCH 6/6] nvme: remove .init_request callback   Ming Lei
• [PATCH V2 0/2] nvme-cli: add options to set/get property of NVMf   Guan Junxiong
  • [PATCH V2 1/2] nvme-cli: add support to get properties for NVMe over Fabric   Guan Junxiong
  • [PATCH V2 2/2] nvme-cli: support to set the property for NVMe over Fabric   Guan Junxiong
  • [PATCH V2 0/2] nvme-cli: add options to set/get property of NVMf   Keith Busch
• [PATCH nvme-cli] nvme: Introduce new 'list-subsys' command   Johannes Thumshirn
• [PATCH nvme-cli v2] nvme: Introduce new 'list-subsys' command   Johannes Thumshirn
  • [PATCH nvme-cli v2] nvme: Introduce new 'list-subsys' command   Keith Busch
• [PATCH V2 0/6] blk-mq: fix race related with device deletion/reset/switching sched   Ming Lei
  • [PATCH V2 1/6] blk-mq: quiesce queue before freeing queue   Ming Lei
    • [PATCH V2 1/6] blk-mq: quiesce queue before freeing queue   Christoph Hellwig
  • [PATCH V2 2/6] blk-mq: support concurrent blk_mq_quiesce_queue()   Ming Lei
    • [PATCH V2 2/6] blk-mq: support concurrent blk_mq_quiesce_queue()   Christoph Hellwig
  • [PATCH V2 3/6] blk-mq: quiesce queue during switching io sched and updating nr_requests   Ming Lei
    • [PATCH V2 3/6] blk-mq: quiesce queue during switching io sched and updating nr_requests   Christoph Hellwig
  • [PATCH V2 4/6] blk-mq: avoid to map CPU into stale hw queue   Ming Lei
    • [PATCH V2 4/6] blk-mq: avoid to map CPU into stale hw queue   Christoph Hellwig
  • [PATCH V2 5/6] blk-mq: fix race between updating nr_hw_queues and switching io sched   Ming Lei
    • [PATCH V2 5/6] blk-mq: fix race between updating nr_hw_queues and switching io sched   Christoph Hellwig
  • [PATCH V2 6/6] nvme-pci: remove .init_request callback   Ming Lei
    • [PATCH V2 6/6] nvme-pci: remove .init_request callback   Sagi Grimberg
      • [PATCH V2 6/6] nvme-pci: remove .init_request callback   Johannes Thumshirn
      • [PATCH V2 6/6] nvme-pci: remove .init_request callback   Ming Lei
      • [PATCH V2 6/6] nvme-pci: remove .init_request callback   Sagi Grimberg
  • [PATCH V2 0/6] blk-mq: fix race related with device deletion/reset/switching sched   Yi Zhang
• [PATCH 5/5] nvme/pci: Complete all stuck requests   Marc MERLIN
• [BUG] NULL pointer dereference in nvme_setup_streams_ns   Christoph Hellwig
  • [BUG] NULL pointer dereference in nvme_setup_streams_ns   Keith Busch
• [PATCH] nvme: Check hw sectors before setting chunk sectors   Keith Busch
  • [PATCH] nvme: Check hw sectors before setting chunk sectors   Martin K. Petersen
  • [PATCH] nvme: Check hw sectors before setting chunk sectors   Sagi Grimberg
• [PATCH] nvme: Setup streams after initializing namespace head   Keith Busch
  • [PATCH] nvme: Setup streams after initializing namespace head   Martin K. Petersen
    • [PATCH] nvme: Setup streams after initializing namespace head   Christoph Hellwig
• [PATCH] NVMe: Format fix when going from 4k sector size to 512 bytes   Jeff Lien
  • [PATCH] NVMe: Format fix when going from 4k sector size to 512 bytes   Keith Busch
  • [PATCH] NVMe: Format fix when going from 4k sector size to 512 bytes   Martin K. Petersen
    • [PATCH] NVMe: Format fix when going from 4k sector size to 512 bytes   Christoph Hellwig
• How to Persistent nvme Storage?   Tony Yang
  • How to Persistent nvme Storage?   Tony Yang
    • How to Persistent nvme Storage?   Sagi Grimberg
      • How to Persistent nvme Storage?   Tony Yang
      • How to Persistent nvme Storage?   Sagi Grimberg
      • How to Persistent nvme Storage?   Tony Yang
      • How to Persistent nvme Storage?   Sagi Grimberg
      • How to Persistent nvme Storage?   Tony Yang
      • How to Persistent nvme Storage?   Tony Yang
      • How to Persistent nvme Storage?   Sagi Grimberg
      • How to Persistent nvme Storage?   Tony Yang
      • How to Persistent nvme Storage?   Sagi Grimberg
      • How to Persistent nvme Storage?   Tony Yang
• [PATCH] nvme-cli: add prints of boot partition feature to show-regs   Minwoo Im
  • [PATCH] nvme-cli: add prints of boot partition feature to show-regs   Minwoo Im
  • [PATCH] nvme-cli: add prints of boot partition feature to show-regs   Sagi Grimberg
  • [PATCH] nvme-cli: add prints of boot partition feature to show-regs   Keith Busch
• [PATCH] nvme-cli: add BPS bit field to CAP controller register   Minwoo Im
  • [PATCH] nvme-cli: add BPS bit field to CAP controller register   Minwoo Im
• [GIT PULLL] nvme fixes for Linux 4.15   Christoph Hellwig
  • [GIT PULLL] nvme fixes for Linux 4.15   Jens Axboe
• [PATCH 0/2] nvme-cli: update Firmware Activate command   Minwoo Im
  • [PATCH 1/2] nvme-cli: update Firmware Activate command for new feature   Minwoo Im
    • [PATCH 1/2] nvme-cli: update Firmware Activate command for new feature   Keith Busch
      • [PATCH 1/2] nvme-cli: update Firmware Activate command for new feature   Minwoo Im
  • [PATCH 2/2] nvme-cli: add a status code of Firmware Commit command   Minwoo Im
• Fabrics Bug: keep alive timer re-initialized when active   Berck Nash
  • Fabrics Bug: keep alive timer re-initialized when active   Sagi Grimberg
• [PATCH v2] NVMe: Format fix when going from 4k sector size to 512 bytes   Jeff Lien
  • [PATCH v2] NVMe: Format fix when going from 4k sector size to 512 bytes   Martin K. Petersen
• [PATCH V2 0/3] nvme-cli: update Firmware Activate to Firmware Commit   Minwoo Im
  • [PATCH V2 0/3] nvme-cli: update Firmware Activate to Firmware Commit   Keith Busch
• [PATCH V2 1/3] nvme-cli: add support alias command with Firmware Activate   Minwoo Im
• [PATCH V2 2/3] nvme-cli: update Firmware Commit with boot partition feature   Minwoo Im
• [PATCH V2 3/3] nvme-cli: add command specific status of Firmware Commit   Minwoo Im
• [PATCH] nvme-pci: move use_sgl initialization to nvme_init_iod()   Minwoo Im
  • [PATCH] nvme-pci: move use_sgl initialization to nvme_init_iod()   Keith Busch
    • [PATCH] nvme-pci: move use_sgl initialization to nvme_init_iod()   Minwoo Im
• Samsung SM961 dies on Lenovo Thinkpad T470   Kai Heng Feng
  • Samsung SM961 dies on Lenovo Thinkpad T470   Judy Brock
• [-next PATCH 0/4] sysfs and DEVICE_ATTR_<foo>   Joe Perches
  • [-next PATCH 0/4] sysfs and DEVICE_ATTR_<foo>   Jani Nikula
  • [-next PATCH 0/4] sysfs and DEVICE_ATTR_<foo>   Corey Minyard
  • [-next PATCH 0/4] sysfs and DEVICE_ATTR_<foo>   Felipe Balbi
• [PATCH v3] NVMe: Format fix when going from 4k sector size to 512 bytes   Jeff Lien
  • [PATCH v3] NVMe: Format fix when going from 4k sector size to 512 bytes   Martin K. Petersen
  • [PATCH v3] NVMe: Format fix when going from 4k sector size to 512 bytes   Christoph Hellwig
• [for-4.16 PATCH 0/5] block, nvme, dm: allow DM multipath to use NVMe's error handler   Mike Snitzer
  • [for-4.16 PATCH 1/5] block: establish request failover callback infrastructure   Mike Snitzer
  • [for-4.16 PATCH 2/5] nvme: use request's failover callback for multipath failover   Mike Snitzer
  • [for-4.16 PATCH 3/5] nvme: move nvme_req_needs_failover() from multipath to core   Mike Snitzer
  • [for-4.16 PATCH 4/5] dm mpath: use NVMe error handling to know when an error is retryable   Mike Snitzer
    • [for-4.16 PATCH 4/5] dm mpath: use NVMe error handling to know when an error is retryable   Mike Snitzer
      • [dm-devel] [for-4.16 PATCH 4/5] dm mpath: use NVMe error handling to know when an error is retryable   Sagi Grimberg
  • [for-4.16 PATCH 0/5] block, nvme, dm: allow DM multipath to use NVMe's error handler   Mike Snitzer
  • [for-4.16 PATCH 0/5] block, nvme, dm: allow DM multipath to use NVMe's error handler   Keith Busch
    • [for-4.16 PATCH 0/5] block, nvme, dm: allow DM multipath to use NVMe's error handler   Mike Snitzer
• [for-4.16 PATCH 5/5] dm mpath: skip calls to end_io_bio if using NVMe bio-based and round-robin   Mike Snitzer
• [PATCH V2] nvme-pci: move use_sgl initialization to nvme_init_iod()   Minwoo Im
  • [PATCH V2] nvme-pci: move use_sgl initialization to nvme_init_iod()   Sagi Grimberg
• [PATCH 4.15-rc 0/3] few fabrics fixes targeted to 4.15   Sagi Grimberg
  • [PATCH 4.15-rc 1/3] nvme-core: Don't set nvme_wq as MEM_RECLAIM   Sagi Grimberg
    • [PATCH 4.15-rc 1/3] nvme-core: Don't set nvme_wq as MEM_RECLAIM   Christoph Hellwig
      • [PATCH 4.15-rc 1/3] nvme-core: Don't set nvme_wq as MEM_RECLAIM   Sagi Grimberg
      • [PATCH 4.15-rc 1/3] nvme-core: Don't set nvme_wq as MEM_RECLAIM   Christoph Hellwig
      • [PATCH 4.15-rc 1/3] nvme-core: Don't set nvme_wq as MEM_RECLAIM   Sagi Grimberg
      • [PATCH 4.15-rc 1/3] nvme-core: Don't set nvme_wq as MEM_RECLAIM   Christoph Hellwig
      • [PATCH 4.15-rc 1/3] nvme-core: Don't set nvme_wq as MEM_RECLAIM   Sagi Grimberg
      • [PATCH 4.15-rc 1/3] nvme-core: Don't set nvme_wq as MEM_RECLAIM   Christoph Hellwig
      • [PATCH 4.15-rc 1/3] nvme-core: Don't set nvme_wq as MEM_RECLAIM   Sagi Grimberg
  • [PATCH 4.15-rc 2/3] nvme-core/loop/rdma: Host delete_work and reset_work on system workqueues   Sagi Grimberg
    • [PATCH 4.15-rc 2/3] nvme-core/loop/rdma: Host delete_work and reset_work on system workqueues   Christoph Hellwig
      • [PATCH 4.15-rc 2/3] nvme-core/loop/rdma: Host delete_work and reset_work on system workqueues   Sagi Grimberg
      • [PATCH 4.15-rc 2/3] nvme-core/loop/rdma: Host delete_work and reset_work on system workqueues   Christoph Hellwig
    • [PATCH 4.15-rc 2/3] nvme-core/loop/rdma: Host delete_work and reset_work on system workqueues   James Smart
      • [PATCH 4.15-rc 2/3] nvme-core/loop/rdma: Host delete_work and reset_work on system workqueues   Sagi Grimberg
  • [PATCH 4.15-rc 3/3] nvme-fabrics: Protect against module unload during create_ctrl   Sagi Grimberg
    • [PATCH 4.15-rc 3/3] nvme-fabrics: Protect against module unload during create_ctrl   Christoph Hellwig
      • [PATCH 4.15-rc 3/3] nvme-fabrics: Protect against module unload during create_ctrl   Sagi Grimberg
• [PATCH 4.15] nvme-rdma: fix concurrent reset and reconnect   Sagi Grimberg
  • [PATCH 4.15] nvme-rdma: fix concurrent reset and reconnect   Christoph Hellwig
• [PATCH 4.15] nvme-mpath: fix last path removal during traffic   Sagi Grimberg
  • [PATCH 4.15] nvme-mpath: fix last path removal during traffic   Christoph Hellwig
• [PATCH] nvmet_fc: correct broken add_port   James Smart
  • [PATCH] nvmet_fc: correct broken add_port   Johannes Thumshirn
    • [PATCH] nvmet_fc: correct broken add_port   James Smart
      • nvmet_fc: correct broken add_port   Mike Snitzer
  • [PATCH] nvmet_fc: correct broken add_port   Christoph Hellwig
• [PATCH 0/3] Performance enhancements   Keith Busch
  • [PATCH 1/3] nvme/pci: Start request after doorbell ring   Keith Busch
    • [PATCH 1/3] nvme/pci: Start request after doorbell ring   Jens Axboe
      • [PATCH 1/3] nvme/pci: Start request after doorbell ring   Jens Axboe
      • [PATCH 1/3] nvme/pci: Start request after doorbell ring   Keith Busch
      • [PATCH 1/3] nvme/pci: Start request after doorbell ring   Jens Axboe
      • [PATCH 1/3] nvme/pci: Start request after doorbell ring   Sagi Grimberg
      • [PATCH 1/3] nvme/pci: Start request after doorbell ring   Christoph Hellwig
    • [PATCH 1/3] nvme/pci: Start request after doorbell ring   Sagi Grimberg
      • [PATCH 1/3] nvme/pci: Start request after doorbell ring   Keith Busch
      • [PATCH 1/3] nvme/pci: Start request after doorbell ring   Sagi Grimberg
    • [PATCH 1/3] nvme/pci: Start request after doorbell ring   Christoph Hellwig
  • [PATCH 2/3] nvme/pci: Remove cq_vector check in IO path   Keith Busch
    • [PATCH 2/3] nvme/pci: Remove cq_vector check in IO path   Jens Axboe
    • [PATCH 2/3] nvme/pci: Remove cq_vector check in IO path   Sagi Grimberg
      • [PATCH 2/3] nvme/pci: Remove cq_vector check in IO path   Sagi Grimberg
      • [PATCH 2/3] nvme/pci: Remove cq_vector check in IO path   Christoph Hellwig
      • [PATCH 2/3] nvme/pci: Remove cq_vector check in IO path   Keith Busch
      • [PATCH 2/3] nvme/pci: Remove cq_vector check in IO path   Sagi Grimberg
  • [PATCH 3/3] block: Polling completion performance optimization   Keith Busch
    • [PATCH 3/3] block: Polling completion performance optimization   Scott Bauer
      • [PATCH 3/3] block: Polling completion performance optimization   Jens Axboe
      • [PATCH 3/3] block: Polling completion performance optimization   Keith Busch
      • [PATCH 3/3] block: Polling completion performance optimization   Jens Axboe
      • [PATCH 3/3] block: Polling completion performance optimization   Keith Busch
      • [PATCH 3/3] block: Polling completion performance optimization   Jens Axboe
      • [PATCH 3/3] block: Polling completion performance optimization   Christoph Hellwig
      • [PATCH 3/3] block: Polling completion performance optimization   Keith Busch
      • [PATCH 3/3] block: Polling completion performance optimization   Sagi Grimberg
    • [PATCH 3/3] block: Polling completion performance optimization   Jens Axboe
    • [PATCH 3/3] block: Polling completion performance optimization   Christoph Hellwig
• [PATCH] nvme_fcloop: avoid possible uninitialized variable warning   James Smart
• [PATCH 00/11] mpt3sas: Enable scsi MQ & lockless command submission   Suganath Prabu S
  • [PATCH 11/11] mpt3sas: lockless command submission   Suganath Prabu S
  • [PATCH 00/11] mpt3sas: Enable scsi MQ & lockless command submission   Hannes Reinecke
• [PATCH 01/11] mpt3sas: set default value for cb_idx   Suganath Prabu S
• [PATCH 02/11] mpt3sas: use list_splice_init()   Suganath Prabu S
• [PATCH 03/11] mpt3sas: separate out _base_recovery_check()   Suganath Prabu S
• [PATCH 04/11] mpt3sas: open-code _scsih_scsi_lookup_get()   Suganath Prabu S
• [PATCH 05/11] mpt3sas: Introduce mpt3sas_get_st_from_smid()   Suganath Prabu S
• [PATCH 06/11] mpt3sas: check command status before attempting abort   Suganath Prabu S
• [PATCH 07/11] mpt3sas: always use first reserved smid for ioctl passthrough   Suganath Prabu S
• [PATCH 08/11] mpt3sas: simplify task management functions   Suganath Prabu S
• [PATCH 09/11] mpt3sas: simplify mpt3sas_scsi_issue_tm()   Suganath Prabu S
• [PATCH 10/11] mpt3sas: simplify _wait_for_commands_to_complete()   Suganath Prabu S
• [PATCH] nvme-pci: allocate device queues storage space at probe   Sagi Grimberg
• [PATCH v2] nvme-pci: allocate device queues storage space at probe   Sagi Grimberg
  • [PATCH v2] nvme-pci: allocate device queues storage space at probe   Ming Lei
    • [PATCH v2] nvme-pci: allocate device queues storage space at probe   Sagi Grimberg
      • [PATCH v2] nvme-pci: allocate device queues storage space at probe   Ming Lei
      • [PATCH v2] nvme-pci: allocate device queues storage space at probe   Christoph Hellwig
• [PATCH v2] nvme-fabrics: Protect against module unload during create_ctrl   Sagi Grimberg
  • [PATCH v2] nvme-fabrics: Protect against module unload during create_ctrl   Max Gurtovoy
  • [PATCH v2] nvme-fabrics: Protect against module unload during create_ctrl   Christoph Hellwig
• [PATCH] nvme-pci: don't open-code nvme_reset_ctrl   Sagi Grimberg
  • [PATCH] nvme-pci: don't open-code nvme_reset_ctrl   Christoph Hellwig
• [for-4.16 PATCH v2 0/5] block, nvme, dm: allow DM multipath to use NVMe's error handler   Mike Snitzer
  • [for-4.16 PATCH v2 3/5] nvme: move nvme_req_needs_failover() from multipath to core   Mike Snitzer
  • [for-4.16 PATCH v2 4/5] dm mpath: use NVMe error handling to know when an error is retryable   Mike Snitzer
  • [for-4.16 PATCH v2 5/5] dm mpath: skip calls to end_io_bio if using NVMe bio-based and round-robin   Mike Snitzer
• [for-4.16 PATCH v2 1/5] block: establish request failover callback   Mike Snitzer
  • [for-4.16 PATCH v2 1/5] block: establish request failover callback   Christoph Hellwig
    • [for-4.16 PATCH v2 1/5] block: establish request failover callback   Mike Snitzer
• [for-4.16 PATCH v2 2/5] nvme: use request_queue's failover_rq_fn callback for multipath failover   Mike Snitzer
  • [for-4.16 PATCH v2 2/5] nvme: use request_queue's failover_rq_fn callback for multipath failover   Christoph Hellwig
    • [for-4.16 PATCH v2 2/5] nvme: use request_queue's failover_rq_fn callback for multipath failover   Mike Snitzer
• [PATCH] mpt3sas: Proper handling of set/clear of "ATA command pending" flag.   Chaitra P B
• [PATCH v2] nvme-pci: don't open-code nvme_reset_ctrl   Sagi Grimberg
• [PATCH v2 rfc] nvme-core/loop/rdma: Host delete_work and reset_work on separate workqueues   Sagi Grimberg
• [PATCH 1/1] nvme: Modify the debug level for setting shutdown timeout   Max Gurtovoy

Last message date: Sun Dec 31 05:33:27 PST 2017
Archived on: Sun Dec 31 05:33:53 PST 2017

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...